Search Results (84)

Anthropomorphic CT phantoms are essential training tools for interventional radiology. Given the high technical demands and stringent safety requirements in this field, realistic CT phantoms are vital simulation tools that support effective hands-on training, procedural planning, and risk mitigation. However, commercially available phantom geometries are limited in their scope. This study investigates the use of polyvinyl alcohol (PVA) to fabricate customizable training phantoms. PVA, a non-toxic material, can be processed into PVA cryogels (PVA-C) with tissue-like mechanical properties. We modified PVA-C (10 wt.% PVA) by incorporating various additives to adjust X-ray attenuation and achieve Hounsfield units (HUs) similar to different soft tissues. HU values were measured at X-ray tube voltages of 70, 120, and 150 kV. The inclusion of barium sulfate (e.g., U = 120 kV; 0.1–2 wt.%: 33.29 ± 5.45–323.72 ± 12.64 HU) and iohexol (e.g., U = 120 kV; 0.1–2 wt.%: 26.05 ± 4.74–161.99 ± 5.69 HU) significantly increased HU values. Iohexol produced more homogeneous HU distributions than barium sulfate and cellulose derivatives, with the latter having air gaps and inconsistencies. The tested formulations encompassed a wide range of soft tissue densities, with HU values varying significantly across the energy range (p < 0.001). While cellulose derivatives showed variable HU modulation, their primary role appears to be in modifying phantom texture and morphology rather than precise attenuation control. In conclusion, PVA-C demonstrates strong potential for use in interventional radiology training phantoms. Further studies may enhance phantom realism by replicating tissue textures, for example, through the incorporation of cellulose-based substances. Full article

Kinesthetic motor imagery (KMI), the mental rehearsal of a motor task without its actual performance, constitutes one of the most common techniques used for brain–computer interface (BCI) control for movement-related tasks. The effect of neural injury on motor cortical activity during execution and imagery remains under investigation in terms of activations, processing of motor onset, and BCI control. The current work aims to conduct a post hoc investigation of the event-related potential (ERP)-based processing of KMI during BCI control of anthropomorphic robotic arms by spinal cord injury (SCI) patients and healthy control participants in a completed clinical trial. For this purpose, we analyzed 14-channel electroencephalography (EEG) data from 10 patients with cervical SCI and 8 healthy individuals, recorded through Emotiv EPOC BCI, as the participants attempted to move anthropomorphic robotic arms using KMI. EEG data were pre-processed by band-pass filtering (8–30 Hz) and independent component analysis (ICA). ERPs were calculated at the sensor space, and analysis of variance (ANOVA) was used to determine potential differences between groups. Our results showed no statistically significant differences between SCI patients and healthy control groups regarding mean amplitude and latency (p < 0.05) across the recorded channels at various time points during stimulus presentation. Notably, no significant differences were observed in ERP components, except for the P200 component at the T8 channel. These findings suggest that brain circuits associated with motor planning and sensorimotor processes are not disrupted due to anatomical damage following SCI. The temporal dynamics of motor-related areas—particularly in channels like F3, FC5, and F7—indicate that essential motor imagery (MI) circuits remain functional. Limitations include the relatively small sample size that may hamper the generalization of our findings, the sensor-space analysis that restricts anatomical specificity and neurophysiological interpretations, and the use of a low-density EEG headset, lacking coverage over key motor regions. Non-invasive EEG-based BCI systems for motor rehabilitation in SCI patients could effectively leverage intact neural circuits to promote neuroplasticity and facilitate motor recovery. Future work should include validation against larger, longitudinal, high-density, source-space EEG datasets. Full article

Humanoid robots have attracted considerable attention for their anthropomorphic structure, extended workspace, and versatile capabilities. This paper presents a novel humanoid upper-body robotic system comprising a pair of 8-degree-of-freedom (DOF) arms, a 3-DOF head, and a 3-DOF torso—yielding a 22-DOF architecture inspired by human biomechanics and implemented via standardized hollow joint modules. To overcome the critical reliance of zeroing neural network (ZNN)-based trajectory tracking on the Jacobian matrix derivative, we propose an integration-enhanced matrix derivative observer (IEMDO) that incorporates nonlinear feedback and integral correction. The observer is theoretically proven to ensure asymptotic convergence and enables accurate, real-time estimation of matrix derivatives, addressing a fundamental limitation in conventional ZNN solvers. Workspace analysis reveals that the proposed design achieves an 87.7% larger total workspace and a remarkable 3.683-fold expansion in common workspace compared to conventional dual-arm baselines. Furthermore, the observer demonstrates high estimation accuracy for high-dimensional matrices and strong robustness to noise. When integrated into the ZNN controller, the IEMDO achieves high-precision trajectory tracking in both simulation and real-world experiments. The proposed framework provides a practical and theoretically grounded approach for redundant humanoid arm control. Full article

Industrial Vision Inspection Systems (VISs) often struggle to adapt to increasing variability of modern manufacturing due to the inherent rigidity of their hardware architectures. Although the Reconfigurable Manufacturing System (RMS) paradigm was introduced in the early 2000s to overcome these limitations, designing such reconfigurable machines remains a complex, expert-dependent, and time-consuming task. This is primarily due to the lack of structured methodologies and the reliance on trial-and-error processes. In this context, this study proposes a novel theoretical framework to facilitate the design of fully reconfigurable handling systems for VISs, with a particular focus on fixture design. The framework is grounded in Model-Based Definition (MBD), embedding semantic information directly into the 3D CAD models of the inspected product. As an additional contribution, a general hardware architecture for the inspection of axisymmetric components is presented. This architecture integrates an anthropomorphic robotic arm, Numerically Controlled (NC) modules, and adaptable software and hardware components to enable automated, software-driven reconfiguration. The proposed framework and architecture were applied in an industrial case study conducted in collaboration with a leading automotive half-shaft manufacturer. The resulting system, implemented across seven automated cells, successfully inspected over 200 part types from 12 part families and detected more than 60 defect types, with a cycle below 30 s per part. Full article

Soft anthropomorphic robotic grippers are attractive because of their inherent compliance, allowing them to adapt to the shape of grasped objects and the overload protection needed for safe human–robot interaction or gripping delicate objects with sophisticated control. The anthropomorphic design allows the gripper to benefit from the biological evolution of the human hand to create a multi-functional robotic end effector. Entirely soft grippers could be more efficient because they yield under high loads. A trending solution is a hybrid gripper combining soft and rigid elements. This work describes a prototype of an anthropomorphic, underactuated five-finger gripper with a direct pneumatic drive from soft bending actuators and an integrated resistive tactile sensor array. It is a hybrid construction with soft robotic structures and rigid skeletal elements, which reinforce the body, focus the direction of the actuator’s movement, and make the finger joints follow the forward kinematics. The hand is equipped with a resistive tactile dielectric elastomer sensor array that directly triggers the hand’s actuation in the sense of reflexes. The hand can execute precision grips with two and three fingers, as well as lateral grip and strong grip types. The softness of the actuation allows the finger to adapt to the shape of the objects. Full article

In this paper, we present the details of the actuator design for our humanoid robot, Mithra. Mithra has been designed to match an average adult human in terms of kinematic and kinetic characteristics. This poses various challenges in actuator design that we have addressed in this work. First, we discuss how the high-level design can help in achieving anthropomorphic traits. Next, the detailed design is verified and finalized using stress and fatigue analyses. Further, we conduct experiments to validate the actuator’s bandwidth and backdrivability, and discuss the outcomes in comparison with human characteristics. The results show that Mithra’s actuators have sufficient structural strength to withstand high running forces, and at the same time, provide human-like traits and capabilities to accommodate human-inspired control paradigms. Full article

The early diagnosis of Alzheimer’s disease remains an unmet medical need due to the cost and invasiveness of current methods. Early detection would ensure a higher quality of life for patients, enabling timely and suitable treatment. We investigate microwave sensing for low-cost, non-intrusive early detection and assessment of Alzheimer’s disease. This study is based on the emerging evidence that the electromagnetic properties of cerebrospinal fluid are affected by abnormal concentrations of proteins recognized as early-stage biomarkers. We design a conformal six-element antenna array placed on the upper portion of the head, operating in the 500 MHz to 6.5 GHz band. It measures scattering response due to changes in the dielectric properties of intracranial cerebrospinal fluid. A multi-layer perceptron network extracts the diagnostic information. Data classification consists of two steps: binary classification to identify the disease presence and multi-class classification to evaluate its stage. The algorithm is trained and validated through controlled experiments mimicking various pathological severities with an anthropomorphic multi-tissue head phantom. Results support the feasibility of the proposed method using only amplitude data and lay the foundation for more extensive studies on microwave sensing for early Alzheimer’s detection. Full article

An anthropomorphic robot is a mechanical device designed to perform human-like tasks, such as manipulating objects, and has been one of the significant contributions in robotics over the past 60 years. This paper presents an advanced system for controlling a robotic arm using user hand gestures and movements. It eliminates the need for traditional sensors or physical controls by implementing an intuitive approach based on MediaPipe and computer vision. The system recognizes the user’s hand movements. It translates them into commands that are sent to a microcontroller, which operates a robotic hand equipped with six servomotors: five for the fingers and one for the wrist, which stands out for its orthonormal design that avoids occlusion problems in turns of up to 180°, guaranteeing precise wrist control. Unlike conventional systems, this approach uses only a 2D camera to capture movements, simplifying design and reducing costs. The proposed system allows replicating the user’s activity with high precision, expanding the possibilities of human-robot interaction. Notably, the system has been able to replicate the user’s hand gestures with an accuracy of up to 95%. Full article

Traditional fracture reduction relies heavily on the surgeon’s experience, which hinders the transmission of skills. This specialization bottleneck, coupled with the high demands on physical strength, significantly limits the efficiency of daily treatments in trauma orthopedics. Currently, most fracture surgery robots focus on open or minimally invasive reduction techniques, which inherently carry the risk of iatrogenic damage due to surgical incisions or bone pin insertions. However, research in closed reduction-oriented robotic systems is remarkably limited. Addressing this gap, our study introduces a novel bone-setting robot for the closed reduction of ankle fractures designed with a redundant parallel platform. The parallel robot’s design incorporates three sliding redundancy actuators that enhance its tilt flexibility while maintaining load performance. Moreover, a singularity-free redundant kinematic solver has been developed, optimizing the robot’s operational efficacy. Building upon the demonstrations from professional closed reduction techniques, we propose the use of a multivariate Student-t process as a multi-output regression model within dynamic movement primitive for accurately learning stable reduction maneuvers. Additionally, we develop an anthropomorphic variable impedance controller based on inverse dynamics. The simulation results demonstrate convincingly that the developed ankle bone-setting robot is proficient in effectively replicating and learning the nuanced closed reduction techniques. Full article

Hand−tracking systems are widely employed for telemanipulating grippers with high degrees of freedom (DOFs) such as an anthropomorphic robotic hand (ARH). However, tracking human thumb motion is challenging due to the complex motion of the carpometacarpal (CMC) joint. Existing hand−tracking systems can track the motion of simple joints with one DOF, but most fail to track the motion of the CMC joint, or to do so, there is a need for expensive and intricately set up hardware systems. This research introduces and realizes an affordable and personalizable tracking device to capture the CMC joint Flexion/Extension and Abduction/Adduction motions. Tracked human thumb motion is mapped to a robot thumb in a hybrid approach: the proposed algorithm maps the CMC joint motion to the first two joints of the robot thumb, while joint mapping is established between the metacarpophalangeal and interphalangeal joints to the last two joints. When the tracking device is paired with a flex glove outfitted with bend sensors, the developed system provides the means to telemanipulate an ARH with a four-DOF thumb and one-DOF underactuated digits. A three-stage framework is proposed to telemanipulate the fully actuated robot thumb. The tracking device and framework were evaluated through a device operation and personalization test, as well as a framework verification test. Two volunteers successfully personalized, calibrated, and tested the device using the proposed mapping algorithm. One volunteer further evaluated the framework by performing hand poses and grasps, demonstrating effective control of the robot thumb for precision and power grasps in coordination with the other digits. The successful results support expanding the system and further evaluating it as a research platform for studying human–robot interaction in grasping tasks or in manufacturing, assistive, or medical domains. Full article

As gestures play an important role in human communication, there have been a number of service robots equipped with a pair of human-like arms for gesture-based human–robot interactions. However, the arms of most human companion robots are limited to slow and simple gestures due to the low maximum velocity of the arm actuators. In this work, we present the JF-2 robot, a mobile home service robot equipped with a pair of torque-controlled anthropomorphic arms. Thanks to the low inertia design of the arm, responsive Quasi-Direct Drive (QDD) actuators, and active compliant control of the joints, the robot can replicate fast human dance motions while being safe in the environment. In addition to the JF-2 robot, we also present the JF-mini robot, a scaled-down, low-cost version of the JF-2 robot mainly targeted for commercial use at kindergarten and childcare facilities. The suggested system is validated by performing three experiments, a safety test, teaching children how to dance along to the music, and bringing a requested item to a human subject. Full article

(1) Background: 3D printable materials with accurately defined iodine content enable the development and production of radiological phantoms that simulate human tissues, including lesions after contrast administration in medical imaging with X-rays. These phantoms provide accurate, stable and reproducible models with defined iodine concentrations, and 3D printing allows maximum flexibility and minimal development and production time, allowing the simulation of anatomically correct anthropomorphic replication of lesions and the production of calibration and QA standards in a typical medical research facility. (2) Methods: Standard printing resins were doped with an iodine contrast agent and printed using a consumer 3D printer, both (resins and printer) available from major online marketplaces, to produce printed specimens with iodine contents ranging from 0 to 3.0% by weight, equivalent to 0 to 3.85% elemental iodine per volume, covering the typical levels found in patients. The printed samples were scanned in a micro-CT scanner to measure the properties of the materials in the range of the iodine concentrations used. (3) Results: Both mass density and attenuation show a linear dependence on iodine concentration (R² = 1.00), allowing highly accurate, stable, and predictable results. (4) Conclusions: Standard 3D printing resins can be doped with liquids, avoiding the problem of sedimentation, resulting in perfectly homogeneous prints with accurate dopant content. Iodine contrast agents are perfectly suited to dope resins with appropriate iodine concentrations to radiologically mimic tissues after iodine uptake. In combination with computer-aided design, this can be used to produce printed objects with precisely defined iodine concentrations in the range of up to a few percent of elemental iodine, with high precision and anthropomorphic shapes. Applications include radiographic phantoms for detectability studies and calibration standards in projective X-ray imaging modalities, such as contrast-enhanced dual energy mammography (abbreviated CEDEM, CEDM, TICEM, or CESM depending on the equipment manufacturer), and 3-dimensional modalities like CT, including spectral and dual energy CT (DECT), and breast tomosynthesis. Full article

This study explores manipulator control using reinforcement learning, specifically targeting anthropomorphic gripper-equipped robots, with the objective of enhancing the robots’ ability to safely exchange diverse objects with humans during human–robot interactions (HRIs). The study integrates an adaptive HRI hand for versatile grasping and incorporates image recognition for efficient object identification and precise coordinate estimation. A tailored reinforcement-learning environment enables the robot to dynamically adapt to diverse scenarios. The effectiveness of this approach is validated through simulations and real-world applications. The HRI hand’s adaptability ensures seamless interactions, while image recognition enhances cognitive capabilities. The reinforcement-learning framework enables the robot to learn and refine skills, demonstrated through successful navigation and manipulation in various scenarios. The transition from simulations to real-world applications affirms the practicality of the proposed system, showcasing its robustness and potential for integration into practical robotic platforms. This study contributes to advancing intelligent and adaptable robotic systems for safe and dynamic HRIs. Full article

Background: In high-risk breast cancer patients with skin infiltration, the administration of a uniform dose to superficial tissues is fundamental in order to reduce local skin relapse. A personalized bolus may prevent the potential inadequate dose distribution of a standard bolus due to air gaps between the bolus and the skin. In this pilot study, we introduced into clinical practice the use of a personalized 3D-printed bolus filled with ultrasound transmission gel. Methods: Seven patients undergoing radiotherapy after mastectomy were selected. A 3D-printed bolus dosimetric assessment was performed with MOSFET dosimeters on an anthropomorphic phantom and, subsequently, on three selected cases with increasing bolus shape irregularity. Acute/late toxicity and local control were assessed. Results: Overall, for the clinical cases, the percentage median difference between the measured and calculated doses was −2.7% (−7.0–4.9%). The median follow-up was 21 months. After two years, one patient showed G2 pain, one patient manifested G1 telangiectasia, one patient showed G1 hyperpigmentation, and two patients had no relevant toxicity. Conclusions: A personalized 3D-printed bolus filled with ultrasound gel may easily reproduce the standard bolus’ consistency and provide accurate coverage of the target area with tolerable acute/late toxicity grades. This is a pilot study, and further investigations are needed. Full article

This work describes the development of a tool for the teleoperation of robots. The tool is developed in a virtual environment using the Unity graphics engine. For the development of the application, a kinematic model and a dynamic model of a mobile manipulator are used. The mobile manipulator robot consists of an omnidirectional platform and an anthropomorphic robotic arm with 4 degrees of freedom (4DOF). The model is essential to emulate the movements of the robot and to facilitate the immersion in the virtual environment. In addition, the control algorithms are established and developed in MATLAB 2020 software, which improves the acquisition of knowledge to teleoperate robots and execute tasks of manipulation and transport of objects. This methodology offers a cheaper and safer alternative to real physical systems, as it reduces both the costs and risks associated with using a real robot for training. Full article