Search Results (193)

Surface-enhanced Raman spectroscopy (SERS) amplifies Raman scattering by placing molecules in the near-field of plasmonic nanostructures, enabling label-free molecular fingerprinting. While attractive for living cell phenotyping, many cellular SERS works rely on internalized colloidal nanoparticles, leading to variable uptake/localization, aggregation-driven hotspot fluctuations, and potential cellular perturbation. Here, we report a chip-like Au/SiO₂ nanolaminate SERS substrate that supports direct culture and label-free measurements of living cells on spatially defined hotspots without nanoparticle uptake. The periodic nanolaminate forms dense nanogaps and is engineered for 785 nm excitation, providing uniform enhancement over a large, culture-compatible area with high hotspot uniformity. By engineering the cell–substrate nano–bio interface, the platform enables reproducible acquisition of intrinsic cellular vibrational fingerprints under physiological conditions without Raman tags. Using MCF-7 and MDA-MB-231 breast cancer cells, we collected hundreds of spectra per line, and MDA-MB-231 exhibited broader spectral variations, indicating greater heterogeneity. Principal component analysis and linear discriminant analysis achieved 99% classification accuracy for MCF-7 and MDA-MB-231, and bright-field imaging confirmed preserved adhesion and canonical morphologies. This chip-based, label-free living cell SERS platform enables scalable, nonperturbative phenotyping and may support rapid malignancy classification and treatment response screening across subtle cancer states. Full article

Hybrid nanomaterials that integrate surface functionality, colloidal stability, and efficient electron-transfer pathways are highly attractive for improving electrochemical sensing performance. Herein, we report the fabrication and evaluation of polyethyleneimine-functionalized gallium nitride nanoparticles (GaN) decorated with gold nanoparticles (GaN-PEI-Au) as a tunable electrode modifier for enhanced differential pulse voltammetry (DPV) detection of erythromycin. Branched polyethyleneimine was employed as a multifunctional interfacial layer to stabilize GaN dispersions, introduce amine-rich surface chemistry, and enable in situ gold nanoparticle formation at the GaN-PEI. The optimized GaN-PEI-Au material exhibited high colloidal stability, a characteristic Au localized surface plasmon resonance in the ~520–525 nm range, and well-defined Au nanoparticles attached to the GaN surface. When applied as an electrode coating, GaN-PEI-Au significantly enhanced the erythromycin oxidation response compared to bare Au and GaN-PEI interfaces, consistent with synergistic increases in electroactive surface area and interfacial charge-transfer efficiency. Under optimized DPV conditions, GaN-PEI-Au-modified electrodes enabled quantitative erythromycin determination with a linear range of 5 nM–2 µM (R² = 0.990), sensitivity of 1.32 × 10⁻³ µA nM⁻¹, and a limit of detection of 52.5 nM, while maintaining stable baseline behavior during repeated scans. The reported GaN-PEI-Au nanocomposites represent a robust platform for sensitive electrochemical detection of pharmaceutical compounds. Full article

Gold nanoparticles (AuNPs) were synthesized via two complementary routes, an inorganic surfactant-mediated method and a plant-extract-assisted biosynthesis, to elucidate how synthesis pathways influence nanoparticle physicochemical properties. In the inorganic route, hexadecyltrimethylammonium bromide (CTAB)-stabilized AuNPs were prepared using CTAB dissolution temperatures of 70–90 °C. UV–Vis spectroscopy showed localized surface plasmon resonance (LSPR) bands at 554–556 nm, while dynamic light scattering (DLS) indicated a decrease in hydrodynamic diameter from 110 to 97 nm with increasing dissolution temperature. Zeta potentials above +40 mV indicated strong electrostatic stabilization, and transmission electron microscopy (TEM) revealed ultrasmall Au cores with a narrow size distribution (2.4–3.0 nm) and a face-centered cubic crystal structure. In the biosynthetic route, AuNPs were obtained using aqueous Erythroxylum coca leaf extracts (1–4% w/v). The extracts exhibited a concentration-dependent red shift (~380 to ~420 nm), and biosynthesized AuNPs displayed LSPR bands in the 550–580 nm range. DLS yielded hydrodynamic diameters of 270–390 nm, with pronounced aggregation (3341 nm) at the lowest extract concentration. Under optimized conditions (HC5, n = 5), reproducible plasmonic and colloidal properties were obtained (maximum absorbance, localized surface plasmon resonance wavelength (λ_max) = 569.6 ± 1.7 nm; hydrodynamic diameter (D_H) = 237.6 ± 24.3 nm; absolute zeta potential (|ζ|)= 32.2 ± 2.6 mV). TEM analysis indicated predominantly quasi-spherical particles with a broader, log-normal size distribution, consistent with extract-mediated growth under heterogeneous organic capping environments. Full article

This study focuses on fabrication and comprehensive characterization of gold nanoparticles (AuNPs) stabilized with polyvinylpyrrolidone (PVP) and polyethylene glycol (PEG), correlating polymer degradation with colloidal stability and localized surface plasmon resonance (LSPR) behavior under controlled gamma doses from 5 to 125 Gy. AuNPs were synthesized via laser-assisted synthesis (LAS) in aqueous medium containing PVP or PEG as a stabilizing and capping agent. Morphology, size distribution, and surface functionalization of the resulting AuNPs@polymer-stabilized were verified through UV-Vis spectroscopy, FTIR, XRD, DLS, zeta potential, and TEM. Results show that the polymer shell effectively preserved the nanoparticles’ integrity by minimizing aggregation and maintaining LSPR features even after exposure to high gamma doses (>75 Gy). PVP demonstrated superior protection compared to PEG, due to the robustness of the solvation layer and carbonyl groups of PVP coating around the AuNPs. These findings highlight the potential of polymer-stabilized AuNPS for applications in radiation-rich environments, while demonstrating LAS as an environmentally friendly and efficient synthesis route. Full article

Nanoparticle-mediated photothermal conversion exploits the unique light-to-heat transduction properties of engineered nanomaterials to address challenges in energy, water, and healthcare. This review first examines fundamental mechanisms—localized surface plasmon resonance (LSPR) in plasmonic metals and broadband interband transitions in semiconductors—demonstrating how tailored nanoparticle compositions can achieve >96% absorption across 250–2500 nm and photothermal efficiencies exceeding 98% under one-sun illumination (1000 W·m⁻², AM 1.5G). Next, we highlight advances in solar steam generation and desalination: floating photothermal receivers on carbonized wood or hydrogels reach >95% efficiency in solar-to-vapor conversion and >2 kg·m⁻²·h⁻¹ evaporation rates; three-dimensional architectures recapture diffuse flux and ambient heat; and full-spectrum nanofluids (LaB₆, Au colloids) extend photothermal harvesting into portable, scalable designs. We then survey photothermal-enhanced thermal energy storage: metal-oxide–paraffin composites, core–shell phase-change material (PCM) nanocapsules, and MXene– polyethylene glycol—PEG—aerogels deliver >85% solar charging efficiencies, reduce supercooling, and improve thermal conductivity. In biomedicine, gold nanoshells, nanorods, and transition-metal dichalcogenide (TMDC) nanosheets enable deep-tissue photothermal therapy (PTT) with imaging guidance, achieving >94% tumor ablation in preclinical and pilot clinical studies. Multifunctional constructs combine PTT with chemotherapy, immunotherapy, or gene regulation, yielding synergistic tumor eradication and durable immune responses. Finally, we explore emerging opto-thermal nanobiosystems—light-triggered gene silencing in microalgae and poly(N-isopropylacrylamide) (PNIPAM)–gold nanoparticle (AuNP) membranes for microfluidic photothermal filtration and control—demonstrating how nanoscale heating enables remote, reversible biological and fluidic functions. We conclude by discussing challenges in scalable nanoparticle synthesis, stability, and integration, and outline future directions: multicomponent high-entropy alloys, modular photothermal–PCM devices, and opto-thermal control in synthetic biology. These interdisciplinary innovations promise sustainable solutions for global energy, water, and healthcare demands. Full article

Zearalenone (ZEN), a stable mycotoxin with estrogenic activity produced by various Fusarium species, poses a serious food safety risk. To facilitate the rapid, sensitive, on-site detection of ZEN in maize and ensure consumer dietary safety, a colloidal gold immunochromatographic assay (CG-ICA) based on a monoclonal antibody was established. ZEN was converted via oxime derivatization into hapten ZAN-O, which was conjugated to a carrier protein to prepare an immunogen for producing a highly specific and sensitive monoclonal antibody. Then, the antibody was conjugated into colloidal gold nanoparticles (AuNPs) and used as capture bioprobes of the CG-ICA test strip. The highly sensitive and specific detection platform was established through systematic optimization of pH value, coating antigen concentration, antibody-labeling dosage, incubation time, and strip assembly conditions. Under optimized conditions, the strip exhibited a detection limit of 11.79 pg/mL and an IC₅₀ of 99.06 pg/mL, with a linear detection range of 13.40–732.48 pg/mL. In addition, the anti-interference capability assay demonstrated that the developed test strip possessed excellent specificity. In spiked maize samples, the CG-ICA test strip demonstrated recoveries ranging from 85.36% to 98.86%, with relative standard deviations (RSDs) below 10%. Thus, the CG-ICA strip provides a rapid, sensitive, and robust on-site tool for ZEN screening in maize, and can be adapted to other hazards by simply switching the antibody. Full article

Gold nanoparticles (AuNPs) are promising for biomedical applications, but their synthesis often requires toxic reagents. “Green” methods utilizing biopolymers offer a sustainable alternative. This study presents a novel synthesis of stable gold nanoparticles using a disulfide-crosslinked derivative of alginic acid (AA–S–S–AA) as both a reducing agent and stabilizer. The S–S-cross-linked alginate was synthesized with a degree of substitution of ~4.2% and reacted with HAuCl₄ in water at room temperature for just 10 min to give stable and polysaccharide in situ modified gold nanoparticles (AA-AuNPs). The resulting AA-AuNPs were characterized by a surface plasmon resonance peak at 539 nm and exhibited good colloidal stability over 14 days. Electron microscopy revealed spherical nanoparticles with a bimodal size distribution (10 nm and 75–100 nm) and a visible polysaccharide shell (5–9 nm), confirming effective stabilization. X-ray photoelectron spectroscopy confirmed the presence of metallic gold (Au⁰) and Au¹⁺. NMR analysis indicated the oxidation of disulfide groups to sulfonic acid during synthesis. The nanoparticles demonstrated a high negative zeta-potential of −53.9 mV, attributable to the polyanionic alginate corona, ensuring strong electrostatic stabilization. This work establishes sulfur-modified alginic acid as an efficient platform for the rapid synthesis of stable, hybrid nanoparticles for potential use in catalysis and biomedicine. Full article

Gold nanoparticles (AuNPs) are widely employed in biosensors; however, conventional synthesis methods require additional surface modification to confer colloidal stability and bioconjugation capability. Here, we report a facile strategy to synthesize carboxymethyl dextran (CMD)-coated AuNPs (AuNP@CMD) that simultaneously serve as a plasmonic label, a stabilizing agent, and a functional scaffold. The CMD was prepared directly via partial carboxymethylation of dextran in a one-pot reduction of HAuCl₄, enabling the synthesis of AuNP@CMD with tunable particle sizes and excellent colloidal stability for at least one month at 4 °C. The CMD coating on AuNPs can prevent nanoparticle aggregation, suppress nonspecific adsorption, and introduce surface carboxyl groups for conjugation of bioprobes. Such characteristics are important to develop plasmonic nanoparticle-linked sorbent assays as an alternative to the conventional colorimetric enzyme-linked immunosorbent assay. When applied to a fiber-optic nanogold-linked sorbent assay, AuNP@CMD enabled ultrasensitive detection of a single-stranded DNA, achieving a detection limit at the femtomolar (fM) concentration level without nucleic acid amplification. Full article

Gold–silver nanoshells (GS-NSs) are hollow spherical nanoparticles with an alloyed Ag-Au shell. GS-NSs exhibit a tunable localized surface plasmon resonance (LSPR) in the visible to near-IR wavelengths as a function of composition and shell thickness and offer greater stability across pH ranges compared to other metal nanoparticles. These properties make GS-NSs promising materials for diagnostics, photothermal therapy, and photocatalysis. However, current research has explored GS-NSs only in aqueous systems, since they immediately aggregate in other solvents, limiting their utility. This paper provides an in-depth study of the choice and effect of non-thiol ligands on the stability and phase-transfer of GS-NSs from aqueous to non-aqueous solvents, such as ethylene glycol, tetrahydrofuran, dichloromethane, and toluene. Ligand exchange for functionalization of GS-NSs was performed with Triton X-100 (TX100), sodium stearate (NaSt), polyvinylpyrrolidone (PVP), and hydroxypropyl cellulose (HPC), prior to phase-transfer. The nanoparticles were phase-transferred to the non-aqueous solvents, and the stability of the colloids in the various solvents before and after functionalization was recorded with UV–visible spectroscopy, dynamic light scattering (DLS), zeta potential (ζ), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The study was also extended to include silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) to evaluate broad-range applicability. Among the ligands studied, HPC functionalization demonstrated the widest range of phase-transfer stability across 21 days for all three particle systems studied. UV–vis spectroscopy demonstrated sustained LSPR integrity after HPC functionalization in EG, THF, and DCM. SEM, TEM, and hydrodynamic size measurements by DLS further confirmed no aggregation in EG, THF, and DCM but suggested possible twinning or clustering in the solution. Overall, this work successfully identified non-toxic alternatives to expand the LSPR stability of citrate-synthesized metal nanoparticles in organic solvents. Full article

The objective of this study was to determine the most stable conformation of L-tryptophan (L-Tryp) on gold and silver nanoparticles. Additionally, this work investigated how these parameters were influenced by analyte concentration, nanoparticle size, and pH. The purpose of this study was to establish whether L-Tryp molecules interact with the nanoparticles through the carboxylate end, the amino group end, or both. This research has diverse applications in biophysics and medical diagnostics, potentially opening up new avenues in these fields. Moreover, it may enrich the disciplines of chemistry and nanotechnology by offering innovative approaches for future research. These findings represent a significant advancement in understanding the interactions between L-Tryp and nanoparticles, making a meaningful contribution to biophysics and medical diagnostics. Surface-Enhanced Raman Scattering (SERS) spectra of L-Tryp in the 100–4000 cm⁻¹ spectral range were obtained using a 785 nm laser for excitation. Gold (Au) and silver (Ag) nanoparticles (NPs) were synthesized using the citrate reduction method. The experimental procedure involved the use of electrolytes (such as NaCl) for colloid activation, which resulted in very high SERS signals. Modification of nanoparticle surface charge was achieved by adjusting the pH of Au and Ag colloidal suspensions between 2 and 11. The SERS spectra indicate that small-sized nanoparticles require high concentrations of L-Tryp to achieve high sensitivity, whereas larger nanoparticles perform effectively at lower concentrations. The pronounced enhancement of stretching vibrations in the COO⁻ group in the SERS spectra strongly suggests that the carboxylate group attaches to silver nanoparticles (AgNPs). Conversely, for gold nanoparticles (AuNPs), a new band at approximately 2136 cm⁻¹ was observed, indicating that the amino group of L-Tryp interacts with Au in its neutral form. These analyses were complemented by theoretical modeling, employing Density Functional Theory (DFT) calculations run using the Gaussian program to study molecular models in which L-Tryp interacted with AgNP and AuNP substrates in neutral, cationic, and anionic forms. Full article

Sensing represents one of the most rapidly developing areas of modern life sciences, spreading from the detection of pathogenic microorganisms in living systems, food, and beverages to hazardous substances in liquid and gaseous environments. However, the development of efficient and low-cost multimodal sensors with easy-to-read functionality is still very challenging. In this paper, stable aqueous colloidal suspensions (ζ-potential was between −30 and −40 mV) of ultrasmall (~7 nm) plasmonic Si-Au and SiC-Au nanocomposites were formed. Two variants of pulsed laser ablation in liquids (PLAL)—direct ablation and laser co-fragmentation—were used for this purpose. The co-fragmentation approach led to a considerable decrease in hydrodynamic diameter (~78 nm) and bandgap widening to approximately 1.6 eV. All plasmonic nanocomposites exhibited efficient multi-band blue emission peaking at ~430 nm upon Xe lamp excitation. Co-fragmentation route considerably (~1 order of magnitude) increased the PL efficiency of the nanocomposites in comparison with the laser-ablated ones, accompanied by a negligible amount of dangling bonds. These silicon-based nanostructures significantly affected the optical response of rhodamine 6G, depending on the synthesis route. In particular, directly ablated nanoparticles revealed a stronger influence on the optical response of dye molecules. The observed findings suggest using such types of semiconductor-plasmonic nanocomposites for multimodal plasmonic and colorimetric sensing integrated with luminescent detection capability. Full article

Gold nanoparticles (AuNPs) are of significant interest due to their unique properties and applications in biomedicine. While hyaluronic acid (HA) has been used to modify pre-formed AuNPs, its thiolated derivative (HA−SH) has been less explored for the direct synthesis and stabilization of AuNPs. This study investigates the use of thiolated hyaluronic acid as a key component in the synthesis of AuNPs. A series of HA-AuNPs (HA-AuNP1-4) were synthesized by reacting HA-SH with HAuCl₄ at different mass ratios. The resulting nanoparticles were characterized using UV-Vis spectroscopy, scanning/transmission electron microscopy (SEM/STEM), X-ray photoelectron spectroscopy (XPS), photon cross-correlation spectroscopy (PCCS), and zeta potential measurements. The chemical transformations of the thiol ligand were studied using NMR spectroscopy. The morphologies and sizes of AuNPs depended on the HA-SH-to-HAuCl₄ ratio, ranging from icosahedral and triangular particles (≥146 nm) to quasi-spherical particles with a bimodal distribution (6–7 nm and 45–60 nm). XPS confirmed the presence of metallic gold (Au⁰) and a Au−S bond, while NMR and XPS revealed the partial oxidation of thiol groups to sulfonic acid. Zeta potential measurements showed that lower HAuCl₄ concentrations resulted in higher negative charge (up to −41.5 mV), enhancing colloidal stability. This work demonstrates a versatile approach to the synthesis of hyaluronic acid-based gold nanomaterials with tunable properties for potential biomedical applications. Full article

This study presents a comparative investigation of plasmonic sensing platforms based on colloidal gold nanoparticle (AuNP) suspensions and gold film over nanosphere (AuFoN) solid substrates for the detection of epidermal growth factor receptor (EGFR), an essential biomarker and therapeutic target in oncology. The strategy relies on fluorescence emission modulation of an Atto647N-labeled DNA oligomer competitively bound to an EGFR-specific aptamer. Our results demonstrate that the colloidal AuNPs can function as competitive binding sensors, leading to fluorescence quenching upon fluorophore attachment to the surface of the NPs and partial fluorescence recovery due to EGFR-induced displacement of the fluorophore–aptamer complex. This specificity was confirmed by reversed binding experiments. However, the system proved highly sensitive to the experimental design: excessive washing (centrifugation) led to unspecific aggregation and signal loss, while reduced washing steps improved signal retention and revealed EGFR-induced fluorophore displacement into the supernatant. On the contrary, film-based substrates exhibited strong initial fluorescence, but failed to retain the fluorophore–aptamer complex after washing, resulting in fluorescence decay independent of EGFR incubation. This indicates that AuFoN lacked the binding stability necessary for specific displacement-based sensing. These findings highlight that while colloidal AuNPs can support competitive binding detection, their reproducibility is limited by colloidal stability and protocol sensitivity, whereas AuFoN substrates require improved surface functionalization strategies. The study emphasizes the critical role of surface chemistry, aptamer–fluorophore affinity, and washing protocols in determining the success or failure of plasmon-enhanced aptamer-based biosensing systems and suggests opportunities for improving specificity and robustness in future designs. Full article

(1) Background: gold nanoparticles (AuNPs) are of particular interest in biomedical research because they possess unique optical properties. In particular, its localized surface plasmon resonance is widely used for photothermal therapy and for detecting molecular interactions at nanoparticle surfaces. To enhance circulation time and biocompatibility, nanoparticles are often coated to shield their hydrophobic character. (2) Methods: we explored the seed-growth method to coat AuNPs with phospholipids to improve colloidal stability. (3) Results: various charged phospholipids were tested, and particle size and zeta potential were characterized. The monodispersity of the coated nanoparticles strongly depends on the narrow size distribution of both gold nanoparticles seeds and lipid vesicles. Achieving stable coated AuNPs with zwitterionic lipids such as phosphatidylcholine was challenging, whereas coatings containing phosphatidylglycerol did not compromise nanoparticle stability. (4) Conclusions: coating AuNPs with phospholipids via the seed-growth method has potential but requires further optimization to improve reproducibility and achieve stable nanoparticles with near-neutral surface charge. Full article

Gold nanoparticles (AuNPs) are attracting more and more attention in life sciences, especially due to their versatile physicochemical properties whereby their colloidal stability in water and organic solvents is crucial. In this study, a systematic comparison of different polymers, synthesis methods and solvents was carried out. The AuNPs were synthesized using the ligand exchange reaction/postsynthetic addition reaction (PAR) and the one-pot synthesis with the polymers poly(vinyl alcohol) (PVA), poly(ethylene glycol) (PEG), poly(vinylpyrrolidone) (PVP) and poly(acrylic acid) (PAA), each with different molar weight averages. Analysis of the AuNP@Polymer conjugates by transmission electron microscopy (TEM) finds essentially unchanged gold nanoparticle core sizes of 11–18 or 11–19 nm in water and ethanol, respectively. The hydrodynamic diameter from dynamic light scattering (DLS) lies largely in the range from 20 to 70 nm and ultraviolet-visible spectroscopy (UV-Vis) showed gold plasmon resonance band maxima between 517 and 531 nm over both synthesis methods and solvents for most samples. The polymer PVA showed the best colloidal stability in both synthesis methods, both in water and after transfer to ethanol. An increased instability in ethanol could only be noted for the PEG coated samples. For the polymers PVP and PAA, the stability depended more specifically on the combination of synthesis method, polymer molecular weight and solvent. Full article