Search Results (1,527)

Latent heat thermal energy storage (LHTES) based on phase change materials (PCMs) is receiving increasing interest since it offers high energy storage density while enabling the integration of variable renewable energies, hence boosting the transition towards a climate-neutral future. Despite the advantages that PCMs offer in providing a nearly isothermal solid–liquid phase transition, they still face some challenges that limit their deployment in real applications such as low thermal conductivity, phase separation, and supercooling, which affect charging and discharging rates. X-ray computed tomography (XCT) is a non-destructive imaging technique widely used in materials science for both qualitative and quantitative analysis of material microstructures and their evolution. Recent advances in laboratory-XCT instrumentation enabled short acquisition times on the order of tens of seconds which allows the investigation of dynamic processes in situ by time-lapse XCT measurements. These advances open new opportunities for revealing information on the morphology of solid–liquid PCMs. Despite the fact that XCT imaging has significant potential for energy research, its application in the field of PCMs is fairly new. A key enabler of applications of XCT to PCMs is the density difference between solid and liquid PCMs, which was found to be higher than 7% for all investigated PCMs. This enabled solid and liquid phases to be distinguished one from the other and properly quantified over time. The present work reviews the principles of laboratory-based XCT and the recent applications of XCT technology in the characterisation of PCMs, with emphasis on the study of the solid–liquid phase transition and validation of numerical PCM models by addressing the potentialities and challenges of XCT in PCM research. Full article

An open question in radiobiology concerns whether low doses of radiation are harmful or if cells are able to tolerate such exposure with minimal or no disruption. This issue is relevant for evaluating public health risks associated with the increasing number of medical computed tomography (CT) diagnostic procedures. This study evaluated the impact of CT scan-level exposure on human adipose mesenchymal stem cells (hMSCs) by measuring DNA damage responses (γH2AX, 53BP1, pATM foci), proliferation (Ki-67), senescence (β-galactosidase), and multiple gene expressions. Responses to one or five CT exposures were compared to a 2 Gy X-ray dose at intervals from 1 h to 10 passages post-irradiation. It was shown that CT scan briefly increased DNA damage markers but showed no significant long-term effects. A high dose of 2 Gy X-ray exposure caused sustained DNA damage, decreased proliferation, increased senescence, and significant changes in hundreds of genes even after several cell generations. After a single CT exposure, gene expression changes were minimal, while high-dose exposure led to strong activation of DNA repair and stress response pathways. Five CT scans caused a slight activation of LIF and HSPA1B genes, but these effects were minor compared to the high-dose group. All detected effects from CT scans were not observed by ten cell passages, whereas high-dose effects persisted. In conclusion, typical CT scan exposures have only short-term, mild effects on hMSCs, while high-dose radiation causes lasting cellular and genetic changes. Full article

Traditional X-ray fluorescence computed tomography (XFCT) suffers from issues such as low photon collection efficiency, slow data acquisition, severe noise interference, and poor imaging quality due to the limitations of mechanical collimation. This study proposes to design an X-ray fluorescence imaging system based on bilateral Compton cameras and to develop an optimized reconstruction algorithm to achieve high-quality 2D/3D imaging of low-concentration samples (0.2% gold nanoparticles). A system equipped with bilateral Compton cameras was designed, replacing mechanical collimation with “electronic collimation”. The traditional LM-MLEM algorithm was optimized through improvements in data preprocessing, system matrix construction, iterative processes, and post-processing, integrating methods such as Total Variation (TV) regularization (anisotropic TV included), filtering, wavelet-domain constraints, and isosurface rendering. Successful 2D and 3D reconstruction of 0.2% gold nanoparticles was achieved. Compared with traditional algorithms, improvements were observed in convergence, stability, speed, quality, and accuracy. The system exhibited high detection efficiency, angular resolution, and energy resolution. The Compton camera-based XFCT overcomes the limitations of traditional methods; the optimized algorithm enables low-noise imaging at ultra-low concentrations and has potential applications in early cancer diagnosis and material analysis. Full article

In the context of sustainable development, improving the durability of engineering materials and the service life of engineering projects is an important path to address engineering sustainability and low-carbon development. This study addresses the durability issues of steel fiber-reinforced cementitious materials (SFRCMs) under the combined action of stray current and chloride ions in metro engineering. Through simulated stray current-accelerated corrosion tests, combined with compressive strength tests and X-ray computed tomography (X-CT) analysis, the effects of steel fiber volume content (0.5%, 1.0%, 1.5%) and electrification duration (0–72 h) on the mechanical properties and corrosion mechanisms were systematically investigated. The results indicate that steel fiber content significantly influences corrosion rate and strength degradation. Specimens with 1.5% fiber content exhibited the highest initial compressive strength (58.43 MPa), but suffered a severe strength loss rate of 37.67% after 72 h of electrification. In contrast, specimens with 1.0% fiber content demonstrated balanced performance, achieving both high initial strength and superior corrosion resistance (19.66% strength loss after 72 h). X-CT analysis revealed that corrosion products initially filled pores during early stages but later induced microcracks in the matrix. Higher fiber content specimens exhibited increased large-pore ratios due to fiber agglomeration, accelerating chloride ion penetration. Furthermore, digital volume correlation (DVC) analysis demonstrated that steel fibers effectively dispersed loads and reduced stress concentration. However, post-corrosion fiber volume loss weakened their crack resistance capacity, highlighting the critical role of fiber integrity in structural durability. Full article

Fly ash, as the main solid waste of coal-fired power plants, is an environmental problem that needs to be solved due to its massive accumulation. The mechanical properties and optimization mechanism of lightweight aggregate concrete prepared by using new single-cylinder rotary kiln fly ash ceramic granules as aggregate were systematically investigated. Through orthogonal experimental design, combined with macro-mechanical testing and microscopic characterization techniques, the effects of cement admixture and ceramic granule admixture on the properties of concrete, such as compressive strength, split tensile strength, and modulus of elasticity, were analyzed, and the optimization scheme of key parameters was proposed. The results show that the new single rotary kiln fly ash ceramic particles significantly improve the mechanical properties of concrete by optimizing the porosity (water absorption ≤ 5%), and its 28-day compressive strength reaches 46~50.9 MPa, which is 53.3~69.7% higher than that of the ordinary ceramic concrete, and the apparent density is ≤1900 kg/m³, showing lightweight and high-strength characteristics. X-ray diffraction (XRD) analysis shows that the new ceramic grains form a more uniform, dense structure through the synergistic effect of internal mullite crystals and dense glass phase; computed tomography (CT) scanning shows that the total volume rate of cracks of the new ceramic concrete was reduced by up to 63.8% compared with that of ordinary ceramic concrete. This study provides technical support for the utilization of fly ash resources, and the prepared vitrified concrete meets the demand of green building while reducing structural deadweight (20~30%), which has significant environmental and economic benefits. Full article

Background/Objectives: Fructooligosaccharides (FOS) and dried tart cherry (TC) are examples of simple and complex (i.e., within a food matrix) prebiotics that have demonstrated promising osteoprotective activity. In this study, we examined how dietary supplementation with TC or FOS shapes the gut-bone axis to promote bone accrual in young adult mice, and the role of the gut microbiota in mediating these responses. Methods: Studies were performed using 10-wk-old female C57BL/6 mice (n = 10–12/group) fed a control diet or control diet supplemented with 10% TC or FOS for 10 wks alone or in combination with an antibiotic/anti-fungal cocktail to suppress the gut microbiota. The bone phenotype was characterized by dual-energy X-ray absorptiometry, micro-computed tomography and static and dynamic bone histomorphometry. The gut-microbiota was profiled and short chain fatty acids (SCFA) were assessed based on 16S rRNA profiling and gas chromatographic techniques, respectively. Results: FOS and TC enhanced bone structure, with FOS yielding more pronounced benefits across cortical and trabecular compartments. These skeletal improvements with FOS occurred in the absence of systemic changes in bone turnover markers but were accompanied by increases in local bone formation, osteoblast and osteocyte numbers, and bone mineralization in the femur. Both diets altered gut microbiota composition and increased fecal concentrations of the most abundant SCFAs (i.e., acetate, propionate and butyrate), but the response was greater with FOS. Suppression of the gut microbiota and fecal SCFAs with the antibiotic/anti-fungal cocktail inhibited the effects of FOS and TC on cortical bone, but induced unexpected improvements in the trabecular bone. Conclusions: These findings demonstrate differential effects of simple and complex prebiotics on the gut-bone axis in young adult female mice and support a role for SCFA in the cortical bone response, but not in the trabecular bone response with this model of gut microbiota suppression. Full article

Background and objectives: Patient-specific components (PSC) represent an innovative option for total knee arthroplasty (TKA) in advanced osteoarthritis. Their effectiveness, however, closely relies on accurate positioning. Our study investigates the accuracy achieved by means of an inertial-based extramedullary cutting guide and the postoperative clinical and radiographic outcomes. Methods and materials: This was a prospective, single-arm, pilot study involving patients undergoing primary TKA with YourKnee^TM PSC. Femoral and tibial bone resections were performed using the Perseus inertial-based extramedullary cutting guide. Postoperative mechanical alignment and component positioning were assessed by computed tomography. Clinical outcomes were evaluated preoperatively and at 1, 3, 6, and 12 months postoperatively by main knee function and clinical outcome measures. Results: The study population included a small cohort (n= 12, four females/eight males, mean age 69 ± 5.65 years, mean BMI 25.7 ± 3.8 kg/m², KL grade > 3) with no control group. The mean absolute error between the planned and obtained Hip–Knee–Ankle angle was 1.36° ± 1.06 and within ±3° of all cases. Mean coronal alignment error was 1.87° ± 0.87 and 1.67° ± 0.75 for the femoral and tibial components, respectively. The mean sagittal alignment error was 1.89° ± 1.24 and 2.45° ± 0.87 for the femoral and the tibial components, respectively. Patients showed significant improvement in clinical and functional scores within the first 6 months: OKS increased from 20.64 ± 2.77 at the preoperative screening to 42.27 ± 4.34 (p < 0.0001), total KSS rose from 90.64 ± 17.25 to 169.36 ± 23.57 (p < 0.0001), and FJS reached 85.09 ± 17.14 at 6 months (p = 0.0031), indicating excellent functional recovery and forgotten joint effect. Knee ROM improved from 90.91° ± 11.14 to 110.36° ± 8.44 (p < 0.0001). After 6 months, outcome scores plateaued, suggesting an early stabilization of clinical benefits. No signs of radiolucency were detected on X-rays at 3- and 12-month follow-ups. Conclusions: The Perseus inertial-based extramedullary cutting guide used in combination with the YourKnee^TM PSCs resulted in accurate intraoperative prosthesis positioning and significant improvements in clinical and functional outcomes at 6 months after surgery. Despite the small sample size and absence of a control group, the results suggest that such combination represents a viable option to conventional surgical instrumentation and current off-the-shelf prosthetic designs. Full article

Fluid inclusions, ubiquitously present within fluorite during diagenesis and mineralization, are released as inevitable ionic components in the pulp during mineral crushing and grinding. This study, grounded in geochemistry, combined microstructural analysis, spectroscopy, and X-ray computed tomography (X-CT) to investigate the morphology and petrographic characteristics of fluid inclusions in fluorite minerals. Building on this foundation, inductively coupled plasma optical emission spectrometry (ICP-OES) and ion chromatography (IC) were employed to analyze the release patterns of fluid inclusion components and their impact on fluorite flotation. The results reveal that fluid inclusions within fluorite are predominantly liquid-rich, two-phase (vapor-liquid) inclusions, exhibiting a spatial distribution density as high as 14.1%. Furthermore, fluid components are released during fluorite grinding, particularly homonymous Ca²⁺ ions, which significantly influence fluorite flotation behavior. Low concentrations of Ca²⁺ can activate fluorite flotation, whereas high concentrations of Ca²⁺ consume the collector (sodium oleate) in solution through competitive adsorption. This competition inhibits the adsorption of sodium oleate onto the fluorite mineral surface. The findings of this research provide theoretical support for in-depth studies on fluid inclusions in minerals and their effects on mineral flotation behavior, thereby facilitating the clean and efficient recovery of strategic fluorite mineral resources. Full article

This study utilizes high-resolution X-ray computed tomography (CT) to evaluate the reservoir characterization in heterogenous carbonate rocks. These rocks show a diagenetic alteration that influences the reservoir quality in the Cretaceous Qamchuqa–Bekhme formations in outcrop and subsurface sections (Gali-Bekhal, Bekhme, and Taq Taq oilfields, NE Iraq). The scanning of fifty-one directional line analyses was conducted on three facies: marine, early diagenetic (non-hydrothermal), and late diagenetic (hydrothermal dolomitization, or HTD). The facies were analyzed from thousands of micro-spot analyses (up to 5250) and computed tomographic numbers (CTNs) across vertical, horizontal, and inclined directions. The surface (outcrop) marine facies exhibited CTNs ranging from 2578 to 2982 Hounsfield Units (HUs) (Av. 2740 HU), with very low average porosity (1.20%) and permeability (0.14 mD) values, while subsurface marine facies showed lower CTNs (1446–2556 HU, Av. 2360 HU) and higher porosity (Av. 8.40%) and permeability (Av. 1.02 mD) compared to the surface samples. Subsurface marine facies revealed higher porosity, lower density, and considerably enhanced conditions for hydrocarbon storage. The CT measurements and petrophysical properties in early diagenesis highlight a considerable porous system in the surface compared to the one in subsurface settings, significantly controlling the quality of the reservoir storage. The late diagenetic scanning values coincide with a saddle dolomite formation formed under high temperature conditions and intensive rock–fluid interactions. These dolomites are related to a hot fluid and are associated with intensive fracturing, vuggy porosities, and zebra-like textures. These textures are more pronounced in the surface than the subsurface settings. A surface evaluation showed a wide CTN range, accompanied by an average porosity of up to 15.47% and permeability of 301.27 mD, while subsurface facies exhibited a significant depletion in the CTN (<500 HU), with an average porosity of about 14.05% and permeability of 91.56 mD. The petrophysical characteristics of the reservoir associated with late-HT dolomitization (subsurface setting) show two populations. The first one exhibited CTN values between 1931 and 2586 HU (Av. 2341 HU), with porosity ranging from 3.10 to 18.43% (Av. 8.84%) and permeability from 0.08 to 2.39 mD (Av. 0.31 mD). The second one recorded a considerable range of CTNs from 457 to 2446 HU (Av. 1823 HU), with porosity from 6.38 to 52.92% (Av. 20.97%) and permeability from 0.16 to 5462.62 mD (Av. 223.11 mD). High temperatures significantly altered the carbonate rock’s properties, with partial/complete occlusion of the porous vuggy and fractured networks, enhancing or reducing the reservoir quality and its storage. In summary, the variations in the CTN across both surface and subsurface facies provide new insight into reservoir heterogeneity and characterization, which is a fundamental factor for understanding the potential of hydrocarbon storage within various geological settings. Full article

To investigate the damage degradation of recycled concrete under mesoscale morphology and the critical expansion force of concrete cracking following sulfate wet–dry cycles, an experimental sulfate wet–dry cycle was designed. In situ scanning of recycled concrete was conducted using X-ray computed tomography (CT). Analysis of the CT images revealed the relationship between the gray scale changes and the sulfate salt wet–dry cycle, along with pore alterations and crack propagation in recycled concrete. A CT image analysis method based on grayscale inversion for crack propagation was developed. By integrating sulfate attack with fracture mechanics, this study explored the phenomenon of pore expansion in recycled concrete subjected to dry–wet cycling tests. The concrete fracture criterion provided the basis for determining the critical expansion force of recycled concrete after the wet–dry cycles. Results indicated that as the duration of sulfate wet–dry cycles increased, the gray scale first increased and then decreased. On the 40th day of the cycling test, the average grayscale value increased by 10.4%. The number of pores in recycled concrete continuously decreased, pore size diminished, and cracks appeared on the specimen’s weak surface. The use of gray scale changes to reveal the degradation of recycled concrete after sulfate wet–dry cycles proved to be both feasible and effective. As the length of the interface crack increased, the stress intensity factor at the crack tip also increased, while the critical expansion force decreased. Additionally, as the pore diameter increased, the stress intensity factor at the crack tip rose. The critical expansion force of a symmetric crack at the edge of a pore was 53 times greater than that of a single crack. Full article

The recycling of interconnects from solid oxide electrolyzer (SOEL) stacks is essential for closing material loops in green hydrogen systems. Since it is mostly made of high-quality stainless steel, remelting is the most practical recovery route, but it inevitably generates slag, where strategic elements like chromium (Cr) are retained. This study investigates the mineralogical and grain characteristics of slag from SOEL interconnect remelting, with an emphasis on Cr distribution and its recovery potential. A correlative approach was applied using X-ray diffraction (XRD), scanning electron microscopy-based mineral liberation Analysis (MLA), and X-ray computed tomography (XCT). Cr was primarily found in magnesiochromite Mg(Al,Cr)₂O₄ (~54 wt.% Cr), constituting only ~5 wt.% of the slag, while lower concentrations were also detected in monticellite and åkermanite. XCT revealed the macroscopic heterogeneity of the slag system, with metallic inclusions and pores concentrated near the metal–slag interface, indicating density-driven settling. Cr-rich spinels were fine-grained (x_50,2 ≈ 55 µm), irregular in shape, and partially intergrown, presenting challenges for mechanical liberation and physical recovery. These features, combined with their compositional selectivity, suggest that Cr-rich spinels are promising candidates for future Engineered Artificial Mineral (EnAM) strategies aimed at enhancing selective recovery from slag. Full article

Pulmonary carcinoids (PCs) are rare tumors, with an incidence ranging from 0.2 to 2 cases per 100,000 population per year. They account for 1–2% of all invasive pulmonary malignancies and represent approximately one-fourth to one-third of all well-differentiated neuroendocrine tumors (NETs) in the body. PCs are generally classified as low- to intermediate-grade malignant tumors, further subdivided into typical carcinoid (TC) and atypical carcinoid (AC), respectively. These tumors exhibit neuroendocrine morphology and differentiation, originating from mature cells of the pulmonary diffuse neuroendocrine system. Traditionally, they are categorized as central or peripheral based on their location relative to the bronchial tree; however, they can arise anywhere within the lung parenchyma. Over 40% of cases may be detected incidentally on a standard chest X-ray, although contrast-enhanced computed tomography (CT) remains the diagnostic gold standard. Surgical resection is the treatment of choice for PCs, with the goal of complete tumor removal while preserving as much healthy lung tissue as possible. In contrast, advanced cases are typically not amenable to surgery, and medical management is focused on controlling hormone-related symptoms and limiting tumor progression. This review aims to provide an overview of the current diagnostic and therapeutic approaches to pulmonary carcinoids. Full article

With the continuous increase in mining activities, effective tailings management has become a critical concern in geotechnical and environmental engineering. This study systematically investigates the microstructural characteristics and 3D reconstruction behavior of copper tailings with different particle sizes using X-ray computed tomography (micro-CT), digital image processing, and 3D modeling techniques. Two particle size groups (fine: 0.075–0.15 mm; coarse: 0.15–0.3 mm) were analyzed to quantify differences in particle morphology, pore structure, and orientation anisotropy. Binary images and reconstructed models revealed that coarse particles tend to have more irregular and angular shapes, while fine particles exhibit more complex pore networks with higher fractal dimensions. The apparent porosity derived from CT data was consistently lower than laboratory measurements, likely due to internal agglomeration effects. Orientation analysis indicated that particle alignment and anisotropy vary systematically with section angle relative to the principal stress direction. These findings offer new insights into the particle-scale mechanisms affecting the packing, porosity, and anisotropy of tailings, providing a scientific basis for enhancing the structural evaluation and sustainable management of tailings storage facilities. Full article

Osteoporosis compromises bone quality and impairs implant osseointegration. Since an adequate bone bed is essential for implant stability and success, this study evaluated the effects of implant surface functionalization with zoledronic acid (ZOL), alone or combined with ruterpy (TERPY), on peri-implant bone healing in healthy (SHAM) and osteoporotic (OVX) rats. ZOL has antiresorptive properties, while TERPY exhibits osteoinductive potential. The hypothesis was that ZOL + TERPY would act synergistically by inhibiting bone resorption and promoting new bone formation. Sixty-six female Wistar rats (3 months old) were divided into six groups (n = 11) according to systemic condition (SHAM or OVX) and implant type: conventional (CONV), ZOL, or ZOL + TERPY. Surgeries (sham or bilateral ovariectomy) were performed on day 0, and implants were placed in the tibial metaphysis on day 90. Fluorochromes were administered on days 104 (calcein) and 114 (alizarin), and euthanasia was performed on day 118. Samples were analyzed histologically via confocal microscopy and micro-computed tomography (Micro-CT). The ZOL + TERPY groups demonstrated significantly accelerated peri-implant bone repair, showing greater bone formation and organization; improved BV/TV, Tb.N, and I.S.; and reduced Tb.Sp and Po.Tot compared to CONV and ZOL-alone groups. In conclusion, ZOL + TERPY enhances and speeds bone healing, even under osteoporotic conditions. Full article

This study presents a comprehensive grayscale texture analysis framework for investigating the microstructural evolution of cement-based materials during hydration. High-resolution X-ray computed tomography (X-CT) slice images were analyzed across five hydration ages (12 h, 1 d, 3 d, 7 d, and 31 d) using three complementary methods: grayscale histogram statistics, fractal dimension calculation via differential box-counting, and texture feature extraction based on the gray-level co-occurrence matrix (GLCM). The average value of the mean grayscale value of slice (Mean_{G_AVE}) shows a trend of increasing and then decreasing. Average fractal dimension values (D_{B_AVE}) decreased logarithmically from 2.48 (12 h) to 2.41 (31 d), quantifying progressive microstructural homogenization. The trend reflects pore refinement and gel network consolidation. GLCM texture parameters—including energy, entropy, contrast, and correlation—captured the directional statistical patterns and phase transitions during hydration. Energy increased with hydration time, reflecting greater spatial homogeneity and phase continuity, while entropy and contrast declined, signaling reduced structural complexity and interfacial sharpness. A quantitative evaluation of parameter performance based on intra-sample stability, inter-sample discrimination, and signal-to-noise ratio (SNR) revealed energy, entropy, and contrast as the most effective descriptors for tracking hydration-induced microstructural evolution. This work demonstrates a novel, integrative, and segmentation-free methodology for texture quantification, offering robust insights into the microstructural mechanisms of cement hydration. The findings provide a scalable basis for performance prediction, material optimization, and intelligent cementitious design. Full article