Search Results (10,726)

This study examines the forced vibration behavior of a hydroelastic system composed of a functionally graded material (FGM) plate, a barotropic compressible Newtonian viscous fluid, and an adjacent rigid wall. The fluid occupies the gap between the plate and the wall. A time-harmonic force, applied in and along the free surface of the FGM plate, excites vibrations within the system. The plate’s motion is modeled using the exact equations of elastodynamics, while the fluid dynamics are described by the linearized Navier–Stokes equations for compressible viscous flow. The governing equations, which feature variable coefficients, are solved using a discrete analytical approach. Boundary conditions enforce impermeability at the rigid wall and continuity of both forces and velocities at the fluid–plate interface. The investigation focuses on the plane strain state of the plate coupled with the corresponding two-dimensional fluid flow. Numerical analyses are conducted to evaluate normal stresses and velocity distributions along the interface. The primary objective is to assess how the graded material properties of the plate influence the frequency-dependent responses of stresses and velocities at the plate–fluid boundary. Full article

In industrial equipment containing hydraulic lines for power transmission, the lines have boundary conditions defined by components such as pumps, valves, and actuators located at the ends of the lines. Sudden changes in any of the boundary conditions may result in significant pressure/flow dynamics (fluid transients) in the lines that may be detrimental or favorable to the performance of the equipment. Accurate models for line transients are defined by the exact solution to a set of simultaneous partial differential equations. In this paper, analytical solutions to the partial differential equations provide Laplace transform transfer functions applicable to any set of boundary conditions yet to be specified that satisfy the requirements of causality. Analytical solutions of these partial differential equations from previous publications are reviewed for cases of laminar and turbulent flow for Newtonian and a class of non-Newtonian fluids. This paper focuses on a method for obtaining total system analytical models and time domain solutions for cases in which the end-of-line components can be modeled with linear equations for perturbations relative to pre-transient flow conditions. Examples with pumps, valves, and actuators demonstrate the process of coupling equations for components at the ends of a line to obtain total system transfer functions and then obtain time domain solutions for outputs of interest associated with system inputs and load variations. Full article

Accurate prediction of the flow field is crucial to evaluating the aerodynamic performance of an aircraft. While traditional computational fluid dynamics (CFD) methods solve the governing equations to capture both global flow structures and localized gradients, they are computationally intensive. Deep learning-based surrogate models offer a promising alternative, yet often struggle to simultaneously model long-range dependencies and near-wall flow gradients with sufficient fidelity. To address this challenge, this paper introduces the Message-passing And Global-attention block (MAG-BLOCK), a graph neural network module that combines local message passing with global self-attention mechanisms to jointly learn fine-scale features and large-scale flow patterns. Building on MAG-BLOCK, we propose FLOW-GLIDE, a cross-architecture deep learning framework that learns a mapping from initial conditions to steady-state flow fields in a latent space. Evaluated on the AirfRANS dataset, FLOW-GLIDE outperforms existing models on key performance metrics. Specifically, it reduces the error in the volumetric flow field by 62% and surface pressure prediction by 82% compared to the state-of-the-art. Full article

This study introduces a new class of coupled differential systems described by fractal–fractional Caputo derivatives with both constant and state-dependent delays. In contrast to traditional delay differential equations, the proposed framework integrates memory effects and geometric complexity while capturing adaptive feedback delays that vary with the system’s state. Such a formulation provides a closer representation of biological and physical processes in which delays are not fixed but evolve dynamically. Sufficient conditions for the existence and uniqueness of solutions are established using fixed-point theory, while the stability of the solution is investigated via the Hyers–Ulam (HU) stability approach. To demonstrate applicability, the approach is applied to two illustrative examples, including a predator–prey interaction model. The findings advance the theory of fractional-order systems with mixed delays and offer a rigorous foundation for developing realistic, application-driven dynamical models. Full article

Introduction: This study explores the impact of logistics information technology (LIT) on supply chain relationships and distribution performance in small and medium-sized enterprises (SMEs) using South Africa as a case study. Although digital supply chain solutions are increasingly important, there is limited evidence of SME efficiency in emerging markets using LIT. Methods: This study utilises a survey of 313 SMEs from four South African provinces. Bayesian structural equation modelling (Bayesian SEM) was then used to examine LIT’s effects on distribution performances in terms of timeliness, product availability, and condition. Results: The results show that the adoption of LIT strengthens buyer–seller networks (β = 0.524, CI = [0.434, 0.613]) and improves distribution by enhancing both timeliness performance (β = 0.237, CI = [0.098, 0.372]) and product condition performance (β = 0.175, CI = [0.042, 0.259], β = 0.222, p < 0.001). However, it does not directly enhance product availability performance (β = 0.085, CI = [−0.030, 0.199]), signifying that LIT adoption by itself fails to improve product availability. The results also demonstrate that SME network relationships mediate the connection between LIT adoption and distribution performance metrics. Discussion: This study’s findings contribute to the literature and offer valuable information and guidance to policymakers as they underscore the importance for SMEs to invest in LIT integration and compatibility, as well as inventory optimisation and improved supplier communication to minimise transit time variation. Policymakers should support SMEs’ digital transformation through interventions including funding and training for LIT adoption. This study confirms the essential role of LIT in SME supply chains and illustrates that technology-facilitated relationships enhance distribution performance, which enhances SME competitiveness. Full article

As the workforce adapts to evolving professional demands, working conditions simultaneously become increasingly stressful, competitive, and challenging, making it essential to examine the determinants of job performance among highly educated workers. This study investigates the influence of psychological capital, work–life balance, rewards, and incentives, and work commitment on job performance among higher education professionals, with particular attention to gender differences. A survey was administered to 661 university-educated workers, and the data was analyzed using covariance-based structural equation modeling (CB-SEM). Results demonstrate that psychological capital, work–life balance, and rewards and incentives positively influence job performance across both genders. However, the mediating effect of work commitment between rewards and incentives, work–life balance, and job performance was confirmed only among women. Work–life balance emerged as the primary factor influencing psychological capital, surpassing the impact of rewards and incentives. The findings reveal significant gender differences in professional commitment patterns, suggesting that women workers exhibit stronger emotional connections between organizational support mechanisms and performance outcomes. Practical implications emphasize the need for organizations to prioritize work–life balance strategies as foundational elements of human resource management, while implementing comprehensive reviews of gender equality policies to ensure equitable workplace experiences. This research contributes valuable insights for developing targeted interventions that optimize professional performance while addressing gender-specific workplace dynamics in emerging economies. Full article

Objective: The aim of this study was to examine how transcranial electrical stimulation (tES) modulates intermuscular coherence (IMC) in sprinters and develop an interpretable neural network model for performance prediction. Methods: Thirty elite sprinters completed a randomized crossover trial involving three tES conditions: motor cortex stimulation (C1/C2), prefrontal stimulation (F3), and sham. Sprint performance metrics (0–100 m phase analysis) and lower-limb sEMG signals were collected. A Kolmogorov–Arnold Network (KAN) was trained to decode neuromuscular coordination–sprint performance relationships using IMC and time–frequency sEMG features. Results: Motor cortex tDCS increased 30–60 m sprint velocity by 2.2% versus sham (p < 0.05, η² = 0.25). γ-band IMC in key muscle pairs (rectus femoris–biceps femoris, tibialis anterior–gastrocnemius) significantly heightened under motor cortex stimulation (F > 4.2, p < 0.03). The KAN model achieved high predictive accuracy (R² = 0.83) through cross-validation, with derived symbolic equations mapping neuromuscular features to performance. Conclusions: Targeted tDCS enhances neuromuscular coordination and sprint velocity, while KAN provides a transparent framework for performance modeling in elite sports. Full article

Calcium is an essential macronutrient for plant growth and development, and there is an optimal calcium concentration for plant growth. Calcium ion concentration changes create “calcium signals” that regulate plant growth through perception, decoding, transduction, and response processes. However, the mechanisms by which calcium signaling regulates photosynthesis are still not fully understood. In this study, Quercus acutissima seedlings were used to investigate the inhibitory effects of different concentrations of the calcium channel blocker lanthanum chloride (LaCl₃) on photosynthesis and the underlying mechanisms. The results show that increasing LaCl₃ concentration significantly decreased photosynthetic parameters, photosynthetic pigment contents, and photosynthetic product accumulation. Long-term water use efficiency decreased with increasing LaCl₃ concentration, while instantaneous water use efficiency initially increased and then decreased. Structural equation modeling analysis indicated that LaCl₃ concentration was significantly positively correlated with leaf calcium concentration in Quercus acutissima seedlings, while it was significantly negatively correlated with stomatal conductance, carotenoids, and soluble sugar content. The study concludes that LaCl₃ directly inhibits the photosynthetic physiological processes of Quercus acutissima seedlings by blocking calcium signaling, providing insights into the regulatory mechanisms of calcium signaling in plant photosynthesis and a theoretical basis for the cultivation and application of Quercus acutissima under varying environmental conditions. Full article

Traditional energy harvesting systems, such as photovoltaics and wind power, often rely on external environmental conditions and are typically associated with contact-based vibration wear and bulky structures. This study introduces light-fueled self-vibration to propose a self-harvesting system, consisting of liquid crystal elastomer fibers, two resistors, and two piezoelectric cantilever beams arranged symmetrically. Based on the photothermal temperature evolution, we derive the governing equations of the liquid crystal elastomer fiber–piezoelectric beam system. Two distinct states, namely a self-harvesting state and a static state, are revealed through numerical simulations. The self-oscillation results from light-induced cyclic contraction of the liquid crystal elastomer fibers, driving beam bending, stress generation in the piezoelectric layer, and voltage output. Additionally, the effects of various system parameters on amplitude, frequency, voltage, and power are analyzed in detail. Unlike traditional vibration energy harvesters, this light-fueled self-harvesting system features a compact structure, flexible installation, and ensures continuous and stable energy output. Furthermore, by coupling the light-responsive LCE fibers with piezoelectric transduction, the system provides a non-contact actuation mechanism that enhances durability and broadens potential application scenarios. Full article

The power and electricity (P & E) sector experiences a substantial number of occupational accidents, including in Nigeria. The implementation of a safety management system (SMS) to promote safety performance and mitigate occupational risks in this sector remains underreported. Therefore, we aimed to explore the factors influencing the safety performance of Nigeria’s P & E distribution companies by applying McGrath’s input–process–output model as a theoretical framework. We used SmartPLS 3.0 for structural equation modelling and SPSS Version 23 for preliminary data analysis. We included a sample of 222 organizations and found that management commitment to safety, safety communication, safety champions, and government regulations influence working conditions and safety performance to varying degrees. Employee involvement, safety training, and working conditions were significant factors affecting safety performance. Management commitment, employee involvement, safety communication, safety champions, and government regulations had significant indirect effects on safety performance through their influence on working conditions. Organizational and regulatory elements played a crucial role in shaping safety performance in high-risk environments. The results highlight vital areas to be considered when developing interventions to address P & E occupational accidents. The results can aid stakeholders in developing and implementing measures to improve workplace safety, including examining current SMSs and considering working conditions when implementing safety interventions. Full article

An analysis of free vibrations for thin functionally graded plate bands is presented in this work. On the microlevel these plate bands have a tolerance-periodic microstructure in planes parallel to the mid-plane. Partial differential equations with tolerance-periodic, highly oscillating, non-continuous coefficients describe the vibrations of such plates. Here, the influence of microstructure inhomogeneity is shown on free vibration frequencies of these plate bands with different boundary conditions. This analysis was carried out within the framework of two models of these plates. The models are represented by equations with smooth, slowly varying coefficients. One of these models, called the tolerance model, takes into account the effect of the microstructure size. Hence, it leads not only to formulas of fundamental lower-order vibration frequencies, but also to formulas of higher-order vibration frequencies, which are related to the microstructure. The analyses of free vibration frequencies for thin functionally graded plate bands with different boundary conditions are presented. The formulas of frequencies are obtained using the Ritz method. A comparison of some calculated results to the results obtained by the FEM is also shown. Full article

This article presents a novel approach to looking at steady-state thermoelastic boundary value problems in isotropic elastic plates with curvilinear holes using a complex variable approach and rational conformal mappings. The physical domain with a non-circular opening is mapped conformally to the unit disk. A thermoelastic potential combines the temperature distribution, which is determined by the Laplace equation with Neumann boundary conditions. Gaursat functions, which are shown as truncated power series, show the complicated stress and displacement fields. They are found by putting boundary constraints at certain collocation points. This procedure presents us with a linear system that can be solved using the least squares method. The method is applied in an annular shape that is exposed to a radial temperature gradient. This experiment shows how changes at the boundary affect the distribution of stress. According to numerical simulations, stress distributions are more uniform when boundaries are smoother, but stress concentrations increase with the size of geometric disturbances. The suggested approach remarkably captures the way geometry and thermal effects interact in two-dimensional thermoelasticity. It is a reliable tool for researching intricate, heated elastic domains. Full article

The current work studies difference problems including two different nabla operators coupled with general summation boundary conditions that depend on a parameter. After we deduce the Green’s function, we obtain an interval of the parameter, where it is strictly positive. Then, we establish a lower and upper bound of the related Green’s function and we impose suitable conditions of the nonlinear part, under which, using the classical Guo–Krasnoselskii fixed point theorem, we deduce the existence of at least one positive solution of the studied equation. After that, we impose more restricted conditions on the right-hand side and we obtain the existence of n positive solutions again using fixed point theory, which is the main novelty of this research. Finally, we give particular examples as an application of our theoretical findings. Full article

A key direction of the development of modern power systems is the application of a continuously increasing number of grid-forming power converters to provide various system services. One of the possible strategies for the implementation of grid-forming control is a control algorithm based on a virtual synchronous generator (VSG). However, at present, the problem of VSG operation under abnormal conditions associated with an increase in output current remains unsolved. Existing current saturation algorithms (CSAs) lead to the degradation of grid-forming properties during overcurrent limiting or reduce the possible range of current output. In this regard, this paper proposes to use the structure of modified current-controlled VSG (CC-VSG) instead of traditional voltage-controlled VSG. A current vector amplitude limiter is used to limit the output current in the CC-VSG structure. At the same time, the angle of the current reference vector continues to be regulated based on the emerging operating conditions due to the voltage feedback in the used VSG equations. The presented simulation results have shown that it was possible to achieve a wide operating range for the current phase from 0° to 180° in comparison with a traditional VSG algorithm. At the same time, the properties of the grid-forming inverter, such as power synchronization without phase-locked loop controller, voltage, and frequency control, are preserved. In addition, in order to avoid saturation of the voltage controller, it is proposed to use a simple algorithm of blocking and switching the reference signal from the setpoint to the current voltage level. Due to this structure, it was possible to prevent saturation of integrators in the control loops and to provide a guaranteed exit from the limiting mode. The results of adding this structure showed a five-second reduction in the overvoltage that occurs when it is absent. A comparison with conditional integration also showed that it prevented lock-up in the limiting mode. The results of experimental verification of the developed prototype of the inverter with CC-VSG control and CSA are also given, including a comparison with the serial model of the hybrid inverter. The results obtained showed that the developed algorithm excludes both the dead time and the load current loss when the external grid is disconnected. In addition, there is no tripping during overload, unlike a hybrid inverter. Full article

Forest fires significantly impact the global climate through carbon emissions, yet the multi-scale coupling mechanisms among meteorological factors, fire behavior, and emissions remain uncertain. Focusing on tropical Asia, this study integrated satellite-based fire behavior products, meteorological datasets, and emission factors, and employed machine learning together with structural equation modeling (SEM) to explore the mediating role of fire behavior in the meteorological regulation of carbon emissions. The results revealed significant differences among vegetation types in both carbon emission intensity and sensitivity to meteorological drivers. For example, average gas emissions (GEs) and particle emissions (PEs) in mixed forests (MF, 323.68 g/m²/year for GE and 0.73 g/m²/year for PE) were approximately 172% and 151% higher, respectively, than those in evergreen broadleaf forests (EBF, 118.92 g/m²/year for GE and 0.29 g/m²/year for PE), which exhibited the lowest emission intensity. Mixed forests and deciduous broadleaf forests exhibited stronger meteorological regulation effects, whereas evergreen broadleaf forests were comparatively stable. Temperature and vapor pressure deficit emerged as the core drivers of fire behavior and carbon emissions, exerting indirect control through fire behavior. Overall, the findings highlight fire behavior as a critical link between meteorological conditions and carbon emissions, with ecosystem-specific differences determining the responsiveness of carbon emissions to meteorological drivers. These insights provide theoretical support for improving the accuracy of wildfire emission simulations in climate models and for developing vegetation-specific fire management and climate adaptation strategies. Full article