Search Results (7)

Based on an integrative approach including molecular genetics and morphological data, the relationships of supraspecific taxa in the tribe Pipistrellini were considered. Based on the sequences of one mitochondrial (cytb) and four nuclear (rag2, dmp1, apob and thy) markers, phylogenetic relationships between representatives of the tribe and a number of other Vespertilioninae genera used as multiple outgroups were reconstructed. Also, 22 metric characters of the skull and teeth were analyzed. Previous indications of the paraphyly of the genus Pipistrellus relative to the genera Nyctalus and Glischropus, its distinct division into “western” and “eastern” clades, as well as the isolated position of P. nathusii among the “western” clade were all confirmed. Morphological data (both craniometry and some qualitative features of the teeth structure and penial bone proportions) also supported the special status of P. nathusii. In the “eastern” clade, the most basal position was occupied, contrary to expectations, not by the morphologically divergent P. stenopterus, but by P. abramus. Its isolated position was also supported by morphometric data and the structure of the penial bone. Based on these data, we propose to allocate P. nathusii into a separate subgenus, for which the name Nannugo Kolenati could be used as valid, with P. nathusii being fixed as its type species. We propose to consider the “eastern” clade of pipistrelles as a separate genus Alionoctula Kruskop, Solovyeva and Kaznadzey, within which we distinguish three species groups, namely “abramus”, “javanicus” and “stenopterus”. Thus, we accept the presence of eight genera in the tribe Pipistrellini: Pipistrellus, Nyctalus, Vansonia, Alionoctula, Glischropus, Scotozous and Scotoecus. A number of species native to Africa and Australasia were not included in the present analysis due to the lack of available collection specimens and published genetic sequences. Further study of these species may clarify the taxonomic boundaries we have proposed. Full article

Background: Osteogenesis imperfecta (OI) is a rare genetic disorder affecting mainly type I collagen, which leads to bone fragility and deformities. OI patients also present craniofacial abnormalities such as macrocephaly and malocclusion. Recently, craniofacial dysmorphism was highlighted in the osteogenesis imperfecta mouse (oim), a validated model of the most severe form of OI. This study explores the impact of zoledronic acid (ZA), commonly administered to OI patients to increase bone mass and mechanical strength, on oim craniofacial structure. Methods: Fifteen oim received a single intravenous ZA injection (100 µg/kg) at 5 weeks (ZA group), while fifteen remained untreated (control). Before euthanasia at 14 weeks, in vivo computed tomography provided craniometric data. Post-euthanasia, heads underwent peripheral Quantitative Computed Tomography (pQCT); coronal decalcified sections through temporomandibular joints were analyzed (n = 6/mouse) after Masson’s trichrome staining (3 sections) or under polarized light to study collagen birefringence (3 sections). Results: In vivo craniometry highlighted the positive effect on vertical growth in ZA oim models as compared to untreated ones, with significant increases in mandibular length and incisor height and without any change in transversal dimensions. The pQCT scans showed the significantly higher total mineral density and cortical mineral density of the mandibular ramus in the ZA than the untreated group. Via microscopic analysis, the cranial vault was thicker and the collagen birefringence was higher in the ZA group than in the untreated group, but differences were not significant. Conclusion: To conclude, ZA had some beneficial effects on craniofacial vertical height and ramus density and, to a lower extent, on vault thickness, while transversal dimensions did not seem to be influenced by ZA intake. These data emphasize the need to consider the whole skeleton when treating OI patients. Full article

Background: This study aimed to compare the accuracy of linear measurements obtained using the classical (manual) method versus cone-beam computed tomography (CBCT) in craniofacial anthropometry, specifically targeting the infraorbital foramen (IOF). Methods: This study involved two sample groups: one of 40 dry skulls measured manually using digital calipers, and the other of 40 CBCT 3D images digitally measured. Measurements included IOF height, distances between the IOF and nasion (N), IOF and frontomalar orbital (FMO), and between the two IOFs. Statistical analysis was performed using an ANOVA, t-test, and Fisher’s test with a significance level of 0.05. Results: The manual method recorded a mean IOF height of 2.1 mm, while CBCT showed a mean of 3.52 mm. Significant differences were recorded between the two methods when measuring IOF height, with a p < 0.001. However, CBCT measurements generally yielded higher accuracy and lower variance due to the absence of significant differences (p > 0.05). The distance between the two IOFs measured by both methods differed significantly (p = 0.03157), with CBCT measurements showing higher values. Conclusions: In conclusion, although no significant differences were found in the overall accuracy of the two methods, CBCT proved to be a more reliable tool for detailed craniofacial measurements due to its higher accuracy and reproducibility. CBCT demonstrated superior consistency in measurements, offering enhanced precision in assessing craniofacial structures. These findings support the growing preference for CBCT in maxillofacial surgery, where precision is critical for successful outcomes. Nonetheless, manual techniques remain valuable in settings where advanced imaging is not accessible. Full article

Background and Objectives: This research investigated the morphometric dimensions of the optic foramen (OF), superior orbital fissure (SOF) and inferior orbital fissure (IOF), using indirect measurement techniques such as laser scanning, making it likely the first study of its kind. This study aimed to identify the morphometric variability of the main orbit communications and to highlight the differences between genders. Materials and Methods: The anthropometric study was conducted on sixty dry skulls (120 orbits) of adults aged between 20 and 70 years. Measurements of orbital communications were made using the RS6 laser scanner. The orbital parameters that were investigated are as follows: length and width of the SOF and IOF, and height and width of the OF. Results: In males, the average height of the OF was 8.27 mm and 8.13 mm in females, while the average width of the OF was 6.34 mm in males and 5.83 mm in females. The SOF average length was 21.09 mm in males and 17.58 mm in females. The widths of the SOF in the three thirds (anterior, middle and posterior) in males were 5.14/4.77/7.11 mm and 2.28/3.48/5.80 mm in females. The average length of the IOF was 33.05 mm in males and 32.30 mm in females. The widths of the IOF in the three thirds (anterior, middle and posterior) were 5.61/3.92/4.70 mm in males and 7.24/4.68/4.08 mm in females. Conclusions: The OF height and width were higher in males compared to females. The SOF length and width were higher in males compared to females. The IOF length was higher in males for the right orbit and higher in females for the left orbit. The IOF width for both orbits was higher in females in the anterior and middle third, and higher for males in the posterior third. Evaluation of dry skulls using laser scanning is reliable and recommended for data accuracy. Laser scanning can become a usable method for all indented and hard-to-reach regions of the cranial skeleton. Full article

Since human skulls may be used as a benchmark of the evolutionary process, the aim of the present study is to assess the cranial affinity of Sardinian populations from different chronological periods, with a standard index to evaluate its benefits for orthodontic purposes. Craniometric variables from four throughout cephalograms (anterior and lateral) of 72 units from historical Sardinian populations, two prehistoric, one medieval, and one modern were compared to the Bolton standard. A one-way analysis of variance (ANOVA) was performed for means comparison. A hierarchical cluster analysis and the bootstrap technique for the reliability of the dendrogram were used. Length data revealed statistically significant results (p < 0.01). Usually, the medieval population showed higher mean values compared to the other groups; the prehistoric population presented the highest value of Euclidean distance when compared to the medieval; the modern showed no affinity to prehistoric populations nor to the Bolton standard. The length and the breadth of the neurocranium, maxillary–alveolar length, orbital height, maximum cranial breadth, and external palate breadth contributed to the dissimilarity among populations. The dissimilarities in the craniometric measurements of Sardinian populations are remarkable. Therefore, the main outcome showed that the craniometric standards of the Bolton standard are not applicable across the Sardinian population. Full article

The suitability of CT and 3D scanners for craniometric proposes was tested using digital calipers when determining linear measurements, and a measuring cylinder was used for the accuracy of 3D printing of deer antlers obtained by the CT and 3D scanners. The resolution of digitized objects from a 3D scanner ranged from 0.008 mm to 0.122 mm. For mandibular dimensions, a positive deviation (p < 0.01) from the primary control measurement was recorded. The average antler volume measured with the cylinder was 60.47 cm³ at the first measurement, in the case of the CT scanner 61.62 cm³ and for the 3D scanner 64.76 cm³—both technologies exhibit a positive deviation from the primary measurement. Precise sensing and measurements can be used to evaluate the quality and evolution of wildlife populations, create digital museum collections, or to examine in detail certain traits such as antler and horn development or dentition. Full article

The discovery and settlement of the tiny and remote Easter Island (Rapa Nui) has been a classical controversy for decades. Present-day aboriginal people and their culture are undoubtedly of Polynesian origin, but it has been debated whether Native Americans discovered the island before the Polynesian settlement. Until recently, the paradigm was that Easter Island was discovered and settled just once by Polynesians in their millennial-scale eastward migration across the Pacific. However, the evidence for cultivation and consumption of an American plant—the sweet potato (Ipomoea batatas)—on the island before the European contact (1722 CE), even prior to the Europe-America contact (1492 CE), revived controversy. This paper reviews the classical archaeological, ethnological and paleoecological literature on the subject and summarizes the information into four main hypotheses to explain the sweet potato enigma: the long-distance dispersal hypothesis, the back-and-forth hypothesis, the Heyerdahl hypothesis, and the newcomers hypothesis. These hypotheses are evaluated in light of the more recent evidence (last decade), including molecular DNA phylogeny and phylogeography of humans and associated plants and animals, physical anthropology (craniometry and dietary analysis), and new paleoecological findings. It is concluded that, with the available evidence, none of the former hypotheses may be rejected and, therefore, all possibilities remain open. For future work, it is recommended to use the multiple working hypotheses framework and the strong inference method of hypothesis testing, rather than the ruling theory approach, very common in Easter Island research. Full article