Search Results (73)

In dense urban environments and large-scale events, Internet infrastructure often becomes overloaded due to high communication demand. Many of these communications are local and short-lived, exchanged between users in close proximity but still relying on global infrastructure, leading to unnecessary network stress. In this context, delay-tolerant networks (DTNs) offer an alternative by enabling device-to-device (D2D) communication without requiring constant connectivity. However, DTNs face significant challenges in routing due to unpredictable node mobility and intermittent contacts, making reliable delivery difficult. Considering these challenges, this paper presents a hybrid Beyond 5G (B5G) DTN architecture to provide private context-aware routing in dense scenarios. In this proposal, dynamic contextual notifications are shared among relevant local nodes, combining federated learning (FL) and edge artificial intelligence (AI) to estimate the optimal relay paths based on variables such as mobility patterns and contact history. To keep the local FL models updated with the evolving context, edge nodes, integrated as part of the B5G architecture, act as coordinating entities for model aggregation and redistribution. The proposed architecture has been implemented and evaluated in simulation testbeds, studying its performance and sensibility to the node density in a realistic scenario. In high-density scenarios, the architecture outperforms state-of-the-art routing schemes, achieving an average delivery probability of 77%, with limited latency and overhead, demonstrating relevant technical viability. Full article

Recently, free-space optical (FSO) communication systems utilizing unmanned aerial vehicle (UAV) relays have garnered significant attention. Integrating UAV relays into FSO communication and employing cooperative diversity techniques not only fulfill the need for long-distance transmission but also enable flexible adjustments of relay positions based on the actual environment. This paper investigates the performance of a parallel-UAV-relay-based FSO communication system. In the considered system, the channel fadings include atmospheric loss, atmospheric turbulence, pointing errors, and angle-of-arrival fluctuation. Using the established channel model, we derive a tractable expression for the probability density function of the total channel gain. Then, we derive closed-form expressions of the system outage probability (OP) and average bit error rate (ABER). Moreover, we also derive the asymptotic OP and ABER for a high-optical-intensity regime. Our numerical results validate the accuracy of the derived theoretical expressions. Additionally, the effects of the number of relay nodes, the field of view, the direction deviation, the signal-to-noise ratio threshold, the atmospheric turbulence intensity, the transmit power, and the transmission distance on the system’s performance are also discussed. Full article

With its unique environment and strategic value, the near space (NS) has become the focus of global scientific and technological, military, and commercial fields. Aiming at the problem of communication interruption when the aircraft re-enters the atmosphere, to ensure the needs of communication, navigation, and telemetry, tracking, and command (TT&C), this paper proposes an overall integration of communication, navigation, and TT&C (ICNT) signals scheme based on the K/Ka frequency band. Firstly, the K/Ka frequency band is selected according to the ITU frequency division, high-speed communication requirements, advantages of space-based over-the-horizon relay, overcoming the blackout problem, and the development trend of high frequencies. Secondly, the influence of the physical characteristics of the NS on ICNT is analyzed through simulation. The results show that when the K/Ka signal is transmitted in the NS, the path loss changes significantly with the elevation angle. The bottom layer loss at an elevation angle of 90° is between 143.5 and 150.5 dB, and the top layer loss is between 157.5 and 164.4 dB; the maximum attenuation of the bottom layer and the top layer at an elevation angle of 0° is close to 180 dB and 187 dB, respectively. In terms of rainfall attenuation, when a 30 GHz signal passes through a 100 km rain area under moderate rain conditions, the horizontal and vertical polarization losses reach 225 dB and 185 dB, respectively, and the rainfall attenuation increases with the increase in frequency. For gas absorption, the loss of water vapor is higher than that of oxygen molecules; when a 30 GHz signal is transmitted for 100 km, the loss of water vapor is 17 dB, while that of oxygen is 2 dB. The loss of clouds and fog is relatively small, less than 1 dB. Increasing the frequency and the antenna elevation angle can reduce the atmospheric scintillation. In addition, factors such as the plasma sheath and multipath also affect the signal propagation. In terms of modulation technology, the constant envelope signal shows an advantage in spectral efficiency; the new integrated signal obtained by integrating communication, navigation, and TT&C signals into a single K/Ka frequency point has excellent characteristics in the simulation of power spectral density (PSD) and autocorrelation function (ACF), verifying the feasibility of the scheme. The proposed ICNT scheme is expected to provide an innovative solution example for the communication, navigation, and TT&C requirements of NS vehicles during the re-entry phase. Full article

Wireless sensor networks (WSNs) face a fundamental challenge: their sensors run on batteries, making energy efficiency crucial. While researchers have tried to extend network lifespans by improving routing and access control protocols across different layers, this remains a complex issue. One promising solution is opportunistic routing (OR), which uses multiple nodes to relay data. This approach reduces how long senders must wait for a specific next-hop node and helps prevent data loss from collisions. That said, choosing which nodes should act as forwarders can greatly affect how well the network performs. To tackle this problem, we developed a new approach called FCM-OR, a local density-based forwarder selection algorithm for opportunistic routing in WSNs. Our algorithm is particularly effective in networks where sensors are not evenly spread out and are densely packed. It uses fuzzy c-means (FCM) clustering to smartly pick the best forwarders based on how many nodes are nearby. By focusing on the sender’s immediate surroundings, FCM-OR helps solve the problems that arise when different parts of the network have varying densities of nodes. We also created a new way to measure routing effectiveness called “forwarding rank”. To test how well our protocol works, we ran extensive simulations comparing it to existing methods, including opportunistic routing with duty-cycled WSNs and load-balanced opportunistic routing. The results are clear: FCM-OR significantly improves both network performance and energy efficiency, especially in networks where nodes are not uniformly distributed. Full article

SF₆ gas has high electrical insulation strength and excellent arc-extinguishing properties, making it widely used in high-voltage equipment. However, gas leakage or liquefaction can reduce its performance, necessitating density monitoring. This paper presents an online calibration device based on balance pressure measurement and outlines the calibration process. It also analyzes the impact of factors such as the measuring balance, gravitational acceleration, cylinder friction, and installation alignment on calibration accuracy. To address uncertainty in the stabilization time of the cylinder gas temperature, a simulation model was created to observe the temperature equilibrium. Furthermore, power consumption analysis of the test device was conducted under different calibration cycles. The experimental results confirm the effectiveness of this calibration strategy. Full article

This paper considers a decentralized and autonomous wireless network of low SWaP (size, weight, and power) fixed-wing UAVs (unmanned aerial vehicles) used for remote exploration and monitoring of targets in an inaccessible area lacking communication infrastructure. Here, the UAVs collaborate to find target(s) and use routing protocols to forward the sensed data of target(s) to an aerial base station (BS) in real-time through multihop communication, which can then transmit the data to a control center. However, the unpredictability of target locations and the highly dynamic nature of autonomous, decentralized UAV networks result in frequent route breaks or traffic disruptions. Traditional routing schemes cannot quickly adapt to dynamic UAV networks and can incur large control overhead and delays. In addition, their performance suffers from poor network connectivity in sparse networks with multiple objectives (exploration and monitoring of targets), which results in frequent route unavailability. To address these challenges, we propose two routing schemes: Pipe routing and TC-Pipe routing. Pipe routing is a mobility-, congestion-, and energy-aware scheme that discovers routes to the BS on-demand and proactively switches to alternate high-quality routes within a limited region around the routes (referred to as the “pipe”) when needed. TC-Pipe routing extends this approach by incorporating a decentralized topology control mechanism to help maintain robust connectivity in the pipe region around the routes, resulting in improved route stability and availability. The proposed schemes adopt a novel approach by integrating the topology control with routing protocol and mobility model, and rely only on local information in a distributed manner. Comprehensive evaluations under diverse network and traffic conditions—including UAV density and speed, number of targets, and fault tolerance—show that the proposed schemes improve throughput by reducing flow interruptions and packet drops caused by mobility, congestion, and node failures. At the same time, the impact on coverage performance (measured in terms of coverage and coverage fairness) is minimal, even with multiple targets. Additionally, the performance of both schemes degrades gracefully as the percentage of UAV failures in the network increases. Compared to schemes that use dedicated UAVs as relay nodes to establish a route to the BS when the UAV density is low, Pipe and TC-Pipe routing offer better coverage and connectivity trade-offs, with the TC-Pipe providing the best trade-off. Full article

pH sensitivity of chitosan allows for precise phase transitions in acidic environments, controlling swelling and shrinking, making chitosan suitable for drug delivery systems. pH transitions are modulated by the presence of cross-linkers by the functionalization of the chitosan chain. This review relays a summary of chitosan functionalization and tailoring to optimize drug release. The potential to customize chitosan for different environments and therapeutic uses introduces opportunities for drug encapsulation and release. The focus on improving drug encapsulation and sustained release in specific tissues is an advanced interpretation, reflecting the evolving role of chitosan in achieving targeted and more efficient therapeutic outcomes. This review describes strategies to improve solubility and stability and ensure the controlled release of encapsulated drugs. The discussion on optimizing factors like cross-linking density, particle size, and pH for controlled drug release introduces a deeper understanding of how to achieve specific therapeutic effects. These strategies represent a refined approach to designing chitosan-based systems, pushing the boundaries of sustained release technologies and offering new avenues for precise drug delivery profiles. Full article

Unmanned aerial vehicles (UAVs) offer solutions to issues like traffic congestion and labor shortages. We developed a distributed UAV management system inspired by virtual circuit and datagram methods in packet-switching networks. By installing houses with wireless terminals, UAVs navigate routes in a multi-hop network, communicating with ground nodes. UAVs are treated as network packets, ground devices are treated as routers, and their connections are treated as links. Activating all nodes as relays increases control message traffic and node load. To optimize connectivity, we minimize relay nodes, connecting non-relay nodes to the nearest relay. This study proposes four relay node selection methods: random selection, two adjacency-based methods, and our innovative approach using Multipoint Relay (MPR) from the Optimized Link State Routing Protocol (OLSR). We evaluated these methods according to their route construction success rates, relay node counts, route lengths, and so on. The MPR-based method proved most effective for UAV route construction. However, fewer relay nodes increase link collisions, and we identify the minimum relay density needed to balance efficiency and conflict reduction. Full article

The modular photoelectrochemical (PEC) reactor accommodating eight photoelectrodes with a total active area of up to 46 cm² has been designed and manufactured using the fused deposition modeling method. The device was equipped with an electrolyte flow system, a relay module for the photoelectrode connection, and a feedback-loop module for switching between counter electrodes. The performance and durability of the system were tested within three case study experiments. The water splitting process was successfully combined with an in situ hydrogen storage in the form of metal hydride phases (confirmed by powder X-ray diffraction) using Fe₂O₃- or WO₃-based photoanodes and LaNi₅-based cathodes. The PEC water oxidation at the anodes was realized either in a strongly alkaline electrolyte (pH > 13.5) or in acidified synthetic seawater (pH < 2) for Fe₂O₃ and WO₃ electrodes, respectively. In the latter case, the photoresponse of the anodes decreased the cell charging voltage by 1.7 V at the current density of 60 mA∙g⁻¹. When the seawater was used as an anolyte, the oxygen evolution reaction was accompanied by the chlorine evolution reaction. The manufactured PEC-metal hydride reactor revealed mechanical and chemical stability during a prolonged operation over 300 h and in the broad range of pH values. Full article

Unmanned aerial vehicle (UAV) as an aerial base station or relay device is a promising technology to rapidly provide wireless connectivity to ground device. Given UAV’s agility and mobility, ground user’s mobility, a key question is how to analyze and value the performance of UAV-based wireless channel in the terahertz (THz) band. In this paper, a three-dimensional (3D) time-varying channel model is proposed for UAV-based dual-mobility wireless channels based on geometric channel model theory in THz band. In this proposed channel model, the small-scale fading (e.g., scattering fading and reflection fading) on rough surfaces of communication environment and the atmospheric molecule absorption attenuations are considered in THz band. Moreover, the statistical properties of the proposed channel model, including path loss, time autocorrelation function (T-ACF) and Doppler power spectrum density (DPSD), have been derived and the impact of several important UAV-related and vehicle-related parameters have been investigated and compared to millimeter wave (mm-wave) band. Furthermore, the correctness of the proposed channel model has been verified via simulation, and some useful observations are provided for the system design of THz UAV-based dual-mobility wireless communication systems. Full article

In Vehicular Ad Hoc Networks (VANETs), high mobility of vehicles issues a huge challenge to the reliability and security of transmitting packets. Therefore, a Secure and Reliable Opportunistic Routing (SROR) is proposed in this paper. During construction of Candidate Forwarding Nodes (CFNs) set, the relative velocity, connectivity probability, and packet forwarding ratio are taken into consideration. The aim of SROR is to maximally improve the packet delivery ratio as well as reduce the end-to-end delay. The selection of a relay node from CFNs is formalized as a Markov Decision Process (MDP) optimization. The SROR algorithm extracts useful knowledge from historical behavior of nodes by interacting with the environment. This useful knowledge are utilized to select the relay node as well as to prevent the malicious nodes from forwarding packets. In addition, the influence of different learning rate and exploratory factor policy on rewards of agents are analyzed. The experimental results show that the performance of SROR outperforms the benchmarks in terms of the packet delivery ratio, end-to-end delay, and attack success ratio. As vehicle density ranges from 10 to 50 and percentage of malicious vehicles is fixed at 10%, the average of packet delivery ratio, end-to-end delay, and attack success ratio are 0.82, 0.26s, and 0.37, respectively, outperforming benchmark protocols. Full article

As the era of sixth-generation (6G) communications approaches, there will be an unprecedented increase in the number of wireless internet-connected devices and a sharp rise in mobile data traffic. Faced with the scarcity of spectrum resources in traditional communication networks and challenges such as rapidly establishing communications after disasters, this study leverages unmanned aerial vehicles (UAVs) to promote an integrated multi-hop communication system combining free-space optical (FSO) communication, terahertz (THz) technology, and intelligent reflecting surface (IRS). This innovative amalgamation capitalizes on the flexibility of UAVs, the deployability of IRS, and the complementary strengths of FSO and THz communications. We have developed a comprehensive channel model that includes the effects of atmospheric turbulence, attenuation, pointing errors, and angle-of-arrival (AOA) fluctuations. Furthermore, we have derived probability density functions (PDFs) and cumulative distribution functions (CDFs) for various switching techniques. Employing advanced methods such as Gaussian–Laguerre quadrature and the central limit theorem (CLT), we have calculated key performance indicators including the average outage probability, bit error rate (BER), and channel capacity. The numerical results demonstrate that IRS significantly enhances the performance of the UAV-based hybrid FSO/THz system. The research indicates that optimizing the number of IRS elements can substantially increase throughput and reliability while minimizing switching costs. Additionally, the multi-hop approach specifically addresses the line-of-sight (LoS) dependency limitations inherent in FSO and THz systems by utilizing UAVs as dynamic relay points. This strategy effectively bridges longer distances, overcoming physical and atmospheric obstacles, and ensures stable communication links even under adverse conditions. This study underscores that the enhanced multi-hop FSO/THz link is highly effective for emergency communications after disasters, addressing the challenge of scarce spectrum resources. By strategically deploying UAVs as relay points in a multi-hop configuration, the system achieves greater flexibility and resilience, making it highly suitable for critical communication scenarios where traditional networks might fail. Full article

Relaying with network coding forms a basis for a variety of collaborative communication systems. A linear block coding framework for multi-way relaying using network codes introduced in the literature shows great promise for understanding, analyzing, and designing such systems. So far, this technique has been used with low-density parity check (LDPC) codes and belief propagation (BP) decoding. Polar codes have drawn significant interest in recent years because of their low decoding complexity and good performance. Our paper considers the use of polar codes also as network codes with differential binary phase shift keying (DBPSK), bypassing the need for channel state estimation in multi-way selective detect-and-forward (DetF) cooperative relaying. We demonstrate that polar codes are suitable for such applications. The encoding and decoding complexity of such systems for linear block codes is analyzed using maximum likelihood (ML) decoding for LDPC codes with log-BP decoding and polar codes with successive cancellation (SC) as well as successive cancellation list (SCL) decoding. We present Monte-Carlo simulation results for the performance of such a multi-way relaying system, employing polar codes with different lengths and code rates. The results demonstrate a significant performance gain compared to an uncoded scheme. The simulation results show that the error performance of such a system employing polar codes is comparable to LDPC codes with log-BP decoding, while the decoding complexity is much lower. Furthermore, we consider a hard threshold technique at user terminals for determining whether a relay transmits or not. This technique makes the system practical without increasing the complexity and can significantly reduce the degradation from intermittent relay transmissions that is associated with such a multi-way relaying protocol. Full article

This paper investigates dual-hop Reconfigurable Intelligent Surface (RIS) wireless communication systems with malicious jamming, where the destination node faces jamming from a malicious jammer with a RIS-Equipped Unmanned Aerial Vehicle (UAV) relay. We model the channel gains for Tx-RIS and Jammer-RIS links with a Rician distribution, while the RIS-Rx link follows a Nakagami-m distribution, and the jamming status is modeled as a Bernoulli-distributed random variable. We derived and provided closed-form expressions for the probability density functions (PDFs) of the legitimate channel and jamming channel in RIS-Equipped UAV wireless communication systems. Additionally, a new closed-form expression for the PDF of the received signal-to-jamming ratio (SJR) is derived. Using the Gauss–Laguerre Approximation method, we calculate the Average Bit Error Rate (ABER) under Binary Phase Shift Keying (BPSK) and Quadrature Amplitude Modulation (QAM) schemes. We analyze the effects of jamming probability, the location of the legitimate RIS, and different channel conditions on ABER performance through theoretical analyses and simulation results. Our theoretical analyses and simulation results indicate that an increase in the probability of malicious jamming significantly raises the ABER. For example, under favorable channel conditions, the ABER for BPSK modulation was observed to be as low as ${10}^{-5}$, whereas under poor channel conditions, the ABER increased to ${10}^{-2}$. Additionally, by reducing the distance between the transmitter and the RIS, the ABER can be improved. The legitimate RIS performs better when closer to the transmitter. These findings highlight the critical impact of channel conditions and the deployment of the RIS on the overall system’s performance. Our results offer valuable insights into designing and evaluating the performance of RIS-Equipped UAV wireless communication systems in the presence of malicious jamming, aiding in the development of countermeasures to enhance system resilience and security. The derived expressions are validated through Monte Carlo simulations. Full article

Relay protection equipment (RPE) is a type of automation equipment aiming to protect power systems from further damage caused by local faults. It is thus important to ensure the normal operation of RPE. As the power density of electronic components continuously increases, the overheating problem of RPE cannot be neglected. Given the difficulties in implementing direct measurement and predicting development trends of RPE temperature, a novel hotspot temperature monitoring method for RPE was proposed, which is a data-driven method. The generative adversarial network, aided by a physical model, is used to address small samples. Afterwards, a stacked ensemble model established based on random forests was used to predict the hotspot temperature of the RPE. Experiment results show that the proposed method can effectively predict hotspot temperature of RPE with the predictive error lower than 2%. And comparative results demonstrate the superiority of the proposed method compared to other methods. Full article