Search Results (6)

Ferrous oxalate dihydrate is a versatile organic mineral with applications across fields. However, little is known about the feasibility of its synthesis directly from iron-bearing minerals using binary subcritical water (sCW) systems and its associated kinetics. In this study, the sCW+oxalic acid system at either 115 °C or 135 °C was investigated as a reaction medium for ferrous oxalate dihydrate (α-FeC₂O₄∙2H₂O) synthesis, starting from ferrotitaniferous sands. The kinetics of the synthesis reaction were studied, and the physicochemical characterization of the as-synthetized ferrous oxalates was performed. Overall, the sCW synthesis was temperature-dependent, following second-order reaction kinetics according to the proposed precipitation pathway. A high reaction rate constant, significantly high yields (up to 89%), and reduced reaction times (2–8 h) were evident at 135 °C. The as-synthetized product corresponded to the monoclinic α-FeC₂O₄∙2H₂O, showed relatively high specific surface areas (from 31.9 to 33.7 m²∙g⁻¹), and exhibited band gap energies within the visible light range (~2.77 eV). These results suggest that α-FeC₂O₄∙2H₂O can be synthesized using an organic dicarboxylic acid and iron-rich, widely available, low-cost mineral precursors. In addition, the as-prepared α-FeC₂O₄∙2H₂O could be further optimized and tested for catalytic and visible light photocatalytic applications. Full article

The fixation of carbon dioxide with epoxides is one of the most attractive methods for the green utilisation of this greenhouse gas and leads to many valuable chemicals. This process is characterised by 100% atom efficiency; however, an efficient catalyst is required to achieve satisfactory yields. Metal–organic frameworks (MOFs) are recognised as being extremely promising for this purpose. Nevertheless, many of the proposed catalysts are based on ions of rare elements or elements not entirely safe for the environment; this is notable with commercially unavailable ligands. In an effort to develop novel catalysts for CO₂ fixation on an industrial scale, we propose novel MOFs, which consist of aluminium ions coordinated with commercially available 1,4-naphthalene dicarboxylic acid (Al@NDC) and their nanocomposites with gold nanoparticles entrapped inside their structure (AlAu@NDC). Due to the application of 4-amino triazole and 5-amino tetrazole as crystallization mediators, the morphology of the synthesised materials can be modified. The introduction of gold nanoparticles (AuNPs) into the structure of the synthesised Al-based MOFs causes the change in morphology from nano cuboids to nanoflakes, simultaneously decreasing their porosity. However, the homogeneity of the nanostructures in the system is preserved. All synthesised MOF materials are highly crystalline, and the simulation of PXRD patterns suggests the same tetragonal crystallographic system for all fabricated nanomaterials. The fabricated materials are proven to be highly efficient catalysts for carbon dioxide cycloaddition with a series of model epoxides: epichlorohydrin; glycidol; styrene oxide; and propylene oxide. Applying the synthesised catalysts enables the reactions to be performed under mild conditions (90 °C; 1 MPa CO₂) within a short time and with high conversion and yield (90% conversion of glycidol towards glycerol carbonate with 89% product yield within 2 h). The developed nanocatalysts can be easily separated from the reaction mixture and reused several times (both conversion and yield do not change after five cycles). The excellent performance of the fabricated catalytic materials might be explained by their high microporosity (from 421 m² g⁻¹ to 735 m² g⁻¹); many catalytic centres in the structure exhibit Lewis acids’ behaviour, increased capacity for CO₂ adsorption, and high stability. The presence of AuNPs in the synthesised nanocatalysts (0.8% w/w) enables the reaction to be performed with a higher yield within a shorter time; this is especially important for less-active epoxides such as propylene oxide (two times higher yield was obtained using a nanocomposite, in comparison with Al-MOF without nanoparticles). Full article

Carrying out organic reactions in water has attracted much attention. Catalytic reactions in water with metallosurfactants, which have both a metallocenter and the surface activity necessary for solubilizing hydrophobic reagents, are of great demand. Herein we proposed new approach to the synthesis of NHC PEPPSI metallosurfactants based on the sequential functionalization of imidazole 4,5-dicarboxylic acid with hydrophilic oligoethylene glycol and lipophilic alkyl fragments. Complexes of different lipophilicity were obtained, and their catalytic activity was studied in model reduction and Suzuki–Miyaura reactions. A comparison was made with the commercial PEPPSI-type catalytic systems designed by Organ. It was found that the reduction reaction in an aqueous solution of the metallosurfactant with the tetradecyl lipophilic fragment was three times more active than the commercially available PEPPSI complexes, which was associated with the formation of stable monodisperse aggregates detected by DLS and TEM. Full article

Designing catalyst systems based on transition metal ions and activators using the principles of green chemistry is a fundamental research goal of scientists due to the reduction of poisonous solvents, metal salts and organic ligands released into the environment. Urgent measures to reduce climate change are in line with the goals of sustainable development and the new restrictive laws ordained by the European Union. In this report, we attempted to use known oxovanadium(IV) green complex compounds with O, N and S donor ligands, i.e., [VO(TDA)phen] • 1.5 H₂O (TDA = thiodiacetate), (phen = 1,10-phenanthroline), oxovanadium(IV) microclusters with 2-phenylpyridine (oxovanadium(IV) cage), [VOO(dipic)(2-phepyH)] • H₂O (dipic = pyridine-2,6-dicarboxylate anion), (2-phepyH = 2-phenylpyridine), [VO(dipic)(dmbipy)] • 2H₂O (dmbipy = 4,4′-dimethoxy-2,2′-dipyridyl) and [VO(ODA)(bipy)] • 2 H₂O (ODA = oxydiacetate), (bipy = 2,2′-bipyridine), as precatalysts in oligomerization reactions of 3-buten-2-ol, 2-propen-1-ol, 2-chloro-2-propen-1-ol and 2,3-dibromo-2-propen-1-ol. The precatalysts, in most cases, turned out to be highly active because the catalytic activity exceeded 1000 g mmol⁻¹·h⁻¹. In addition, the oligomers were characterized by Fourier-transform infrared spectroscopy (FTIR), matrix-assisted laser desorption/ionization (MALDI-TOF-MS), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques. Full article

Two organic-inorganic hybrids based on sodium peroxidomolybdates(VI) and 3,5-dicarboxylic pyridine acid (Na-35dcpa) or N-oxide isonicotinic acid (Na-isoO) have been synthesized and characterized. All compounds contain inorganic parts: a pentagonal bipyramid with molybdenum center, and an organic part containing 3,5-dicarboxylic pyridine acid or N-oxide isonicotinic acid moieties. The type of organic part used in the synthesis influences the crystal structure of obtained compounds. This aspect can be interesting for crystal engineering. Crystal structures were determined using powder X-ray diffraction or single crystal diffraction for compounds Na-35dcpa and Na-isoO, respectively. Elemental analysis was used to check the purity of the obtained compounds, while X-ray Powder Diffraction (XRPD) vs. temp. was applied to verify their stability. Moreover, all the compounds were examined by Infrared (IR) spectroscopy. Their catalytic activity was tested in the Baeyer–Villiger (BV) oxidation of cyclohexanone to ε-caprolactone in the oxygen-aldehyde system. The highest catalytic activity in the BV oxidation was observed for Na-35dcpa. The compounds were also tested for biological activity on human normal cells (fibroblasts) and colon cancer cell lines (HT-29, LoVo, SW 620, HCT 116). All compounds were cytotoxic against tumor cells with metastatic characteristics, which makes them interesting and promising candidates for further investigations of specific anticancer mechanisms. Full article

In this study, a series of activated carbon-based supports with different oxygen-containing groups (OCGs) proportions were obtained via thermal treatment in an ozone flow. Semiquantitative analyses indicated that the performance of the catalyst attained a maximum after 30 min of treatment with ozone flow, and had a positive correlation with the content ratios of carboxyl and hydroxyl groups. Further, temperature-programmed desorption analysis demonstrated that the high performance (63% acetic acid conversion) of the prepared catalyst for the acetoxylation of acetylene could be ascribed to the reduced strength of increased capacity of acetylene adsorption. Density functional theory proved that the additional –COOH in the dicarboxylic catalytic system could be employed as a support for the active sites, and enhancing C₂H₂ adsorption strength in the rate-limiting step in the actual experimental process effectively accelerated the reaction rate. Thus, the OCGs on the surface of activated carbon play a crucial role in the catalytic performance of the acetylene acetoxylation catalyst. Full article