Search Results (106)

Background/Objectives: This study aimed to assess the long-term clinical performance of full-arch fixed restorations made of fiber-reinforced composite (FRC) supported by four ultra-short implants (4.0 × 5.0 mm) in patients with edentulous, atrophic mandibles. Methods: Ten patients were treated at Sapienza University of Rome and monitored over a 10-year period. Each case involved the placement of four plateau-design implants with a pure conometric connection and a calcium phosphate-treated surface. The final prostheses were fabricated using CAD/CAM-milled Trinia^® fiber-reinforced composite frameworks. Clinical parameters included implant and prosthesis survival, marginal bone level (MBL), peri-implant probing depth (PPD), and patient-reported outcome measures (PROMs). Results: Implant and prosthesis survival reached 100% over the 10-year follow-up. MBL data showed a minor bone gain of approximately 0.11 mm per 5 years (p < 0.0001). PPD remained stable under 3 mm, with a minimal increase of 0.16 mm over the same period (p < 0.0001). PROMs reflected sustained high patient satisfaction. No technical complications, such as chipping or framework fracture, were observed. Conclusions: Rehabilitation of the edentulous mandible with ultra-short implants and metal-free FRC prostheses proved to be a minimally invasive and long-lasting treatment option. The 10-year follow-up confirmed excellent implant and prosthetic outcomes, favorable peri-implant tissue health, and strong patient satisfaction. Nonetheless, further studies with larger sample sizes are needed to confirm these encouraging results and strengthen the clinical evidence. Full article

Objectives: With technological advancements, fabricated block onlay allografts have been developed, particularly for grafting severely resorbed alveolar crests before implant surgery. This study aimed to evaluate the alveolar crest lengths of the edentulous maxilla and mandible using cone beam computed tomography (CBCT) and to investigate their correlations with gender and age. The data obtained will serve as preliminary input for block onlay allograft production. Methods: CBCT scans of 451 participants and 595 edentulous jaws were analyzed. The following measurements were taken: the distance between the zygomatic buttress projection and the infraorbital foramen projection onto the crest (U1, U4); from the infraorbital foramen projection to the incisive canal (U2, U3); between the midpoint of the linea obliqua externa projection and the mental foramen projection (L1, L4); and from the mental foramen projection to the midline at the incisive canal level (L2, L3). Measurements were compared across gender and age groups. Results: No significant differences were observed in maxillary measurements between genders. However, the values of L1, L2, and L4 in males were significantly higher than those in females (p < 0.05). Age did not affect substantially most measurements, except for L4, where individuals over 70 years had lower mean values than those under 50 years (p < 0.05). Conclusions: The mandibular posterior region demonstrated the most prominent residual alveolar crest. Mandibular crest lengths were significantly greater in males. Although age showed a limited impact, a reduction in posterior mandibular crest length was evident in individuals over 70 years compared to younger individuals. Full article

Background: Tooth loss significantly impacts the quality of life for adults. Inferior alveolar nerve (IAN) repositioning has garnered interest as a treatment for facilitating dental implant placement in the severely atrophic posterior mandible. However, there remains a need for standardization and classification of these techniques to improve outcomes. This study aims to propose a new clinical classification system for IAN repositioning procedures based on anatomical and procedural parameters. Methods: This study retrospectively analyzed preoperative radiographic records and surgical procedure documents over a 15-year period (2008–2023) for patients who underwent implant placement combined with IAN repositioning in the posterior atrophic mandible. Cases were classified into four categories according to bone availability, nerve location, and type of surgical intervention. Results: The study analyzed 142 edentulous posterior mandibles in 105 patients (77 women, 28 men; age range: 20–75). The cases were divided into four categories: Category 1 (58 patients, 78 sites), treated with one surgery; Category 2 (15 patients, 15 sites), treated in two stages; Category 3 (20 patients, 25 sites); and Category 4 (12 patients, 24 sites), with Categories 3 and 4 treated in a single surgery. Across all 132 sites, 411 dental implants were placed and restored with implant-supported fixed prostheses. Conclusions: This proposed classification provides a structured systematic framework for assessing and planning IAN repositioning procedures. It facilitates better diagnosis, treatment planning, and prediction of surgical stages in patients needing IAN repositioning for dental implant placement. Full article

Background: The potential impact of the number of implants (four vs. six) on the implant survival of implant-supported fixed complete dentures (IFCDs) remains inconclusive and subject to ongoing debate. This study compared the implant survival of immediately loaded four vs. six IFCDs, delivered using a patient-centered systematic treatment plan, in a large patient cohort assessed with consistent diagnostic methodology and comprehensive longitudinal follow-up. Methods: This retrospective study included records of 943 patients receiving 5989 implants with an average follow-up of 5.0 ± 3.2 (range 0–17) years delivered using a systematic clinical decision support system (CDSS) based on a defined alveolar atrophy classification (CC). Implant survival was analyzed considering predictor variables comprising treatment and anatomic and systemic health-related factors at the overall, maxillary, and mandibular levels using Kaplan–Meier analysis, log-rank tests, and single-predictor and multilevel Cox proportional hazard analysis derived from causal direct acyclic graph methodologies. Results: The 2- and 5-year cumulative survival rates (CSRs) of four and six IFCDs were comparable (2-year: 98.6% vs. 98.4%, p = 0.362; 5-year: 98.8%, 98.7% p = 0.346). The differences between four and six IFCDs were more pronounced at the maxillary levels, specifically after 2 years (97.7% vs. 98.6% p = 0.084), and at the mandibular level after 5 years (98.6% vs. 99.4%, p = 0.136.). Multilevel Cox proportional hazard models at overall and jaw levels adjusted for confounding factors indicated that implant loss was correlated to jaw type and age at overall and age alone at the mandibular level. Alveolar atrophy (CC) defined within the adopted CDSS was not robustly associated with implant loss. Conclusions: Under the guidance of a systematically applied patient-centered CDSS, four and six IFCDs demonstrated high and comparable mid-to-long-term implant survival rates irrespective of the level of analysis or statistical model used to adjust for confounding factors. Prosthetic and technical complications were not evaluated and were, therefore, beyond the scope of this study. Full article

Background/Objectives: Edentulism is a significant public health concern, particularly among aging populations, affecting oral functionality, aesthetics, and overall health. This study assessed the edentulism status of patients at the Prosthodontic Clinic of Cluj-Napoca, Romania, and explored the possible correlations with socioeconomic factors such as age, general health, smoking, and alcohol consumption. This study aimed to inform public health strategies to reduce edentulism incidence and improve overall oral health outcomes in Romania. Methods: The current study included 208 patients (127 females and 81 males). Each participant completed a standardized data collection form designed to gather comprehensive information on socio-demographic characteristics (including age, gender, and environmental origin), self-reported general health, and lifestyle habits related to smoking and alcohol consumption. The clinical examination was performed by the same operator, recording the odontal and periodontal status, as well as prosthodontic evaluation (including Kennedy class). Results: Findings indicated that female patients had more frequent class 3 and complete edentulism in the maxilla, while males predominantly presented class 3 in the maxilla and class 1 in the mandible. The age distribution revealed that patients aged 20–40 exhibited the highest prevalence of Kennedy class 3, while those over 60 showed a notable increase in complete edentulism (p < 0.05). Although most patients were from urban areas, no significant difference was found between origin and edentulism class. A significant link between alcoholism and mandibular edentulism was also identified (p < 0.05). Conclusions: Edentulism tends to progress with advancing age, often leading to more extensive tooth loss and the need for comprehensive dental rehabilitation. The condition is closely linked to general health status, highlighting its relevance as a potential indicator of systemic health risks. Lifestyle factors, particularly smoking and alcoholism, appear to contribute significantly to the deterioration of oral health, underscoring the importance of preventive strategies and early intervention. Full article

Background/Objectives: Subperiosteal implants (SPIs) were first used in the 1940s, but due to their complications and the rise of dental implants, they were discontinued. Thanks to new technologies and new materials, nowadays they are being used again and studied as a treatment for severe bone defects. This review analyzes the clinical results—survival rates and complications—of SPIs used to support full arch rehabilitations of severely resorbed maxillae and mandibles, comparing the outcomes resulting from implant placement conducted in one or two surgical interventions. Methods: An automated search was conducted in four databases (Medline/Pubmed, Scopus, Web of Science, and Cochrane Library), as well as a manual search for relevant clinical articles published before 28 February 2025. The review included human studies with at least four patients, in which SPIs were placed to restore full-arch edentulous maxillae and mandibles. Quality of evidence was evaluated using the Newcastle–Ottawa Quality Assessment Scale and the Joanna Briggs Institute Critical Appraisal tool. Results: A total of 14 studies met the inclusion criteria and were included for analysis, including 958 patients and 973 SPIs. The survival rate was 100% when one surgical intervention was performed and 85% when two interventions were performed after 4–38 months and 3–22 years follow-up, respectively. Conclusions: SPIs would appear to offer a good alternative for patients with severe bone atrophies, especially SPIs fabricated using digital techniques in a single step, presenting promising survival rates and a low complication rate, although more randomized clinical trials with long-term follow-up are needed. Full article

Background/Objectives: The lingual foramina of the mandible serve as passageways for arterial branches that are susceptible to injury during surgical procedures, potentially leading to varying degrees of hemorrhage. The objective of the present study was to contribute to the quantification and classification of lingual foramina using cadaveric dry mandibles in relation to surgical safety and, especially, to the risk of perioperative bleeding. Methods: This study examined the number, diameter, and spatial relationship of lingual foramina to the genial tubercle, alveolar process, and alveolar crest in dry mandibles. Stainless steel wire threads and Digimatic caliper measurements were utilized. Cluster analysis was employed for the classification of foramina into distinct spatial groups. One-way analysis of variance (ANOVA) was used to compare mean values among ≥3 groups. Results: A total of 100 dry mandibles were initially analyzed for the presence of lingual foramina with a diameter of ≥2 mm. In 96 of them (50 dentate and 46 edentulous), 387 lingual foramina (mean: 4.03 per mandible) were recognized; the remaining 4 had smaller lingual foramina (diameter <2 mm). Only 4 mandibles (4.2%) exhibited a single lingual foramen, whereas the remaining 92 (95.8%) displayed multiple foramina (up to nine). The observed lingual foramina had a diameter of 0.44 ± 0.02 mm and were located at distances of 8.74 ± 0.54 mm from the genial tubercle, 14.19 ± 0.87 mm from the alveolar crest, and 14.53 ± 0.84 mm from the inferior border of the mandible. Based on their relationship to the genial tubercle, the foramina were classified into four distinct groups: (i) right (27/387—7%), (ii) proximal (254/387—66%), (iii) superior (81/387—21%), and (iv) left (25/387—6%). The superior group exhibited the largest mean diameter (0.52 ± 0.22 mm, ANOVA p < 0.001). The probability of detecting a lingual foramen was minimized at a distance of 13.00 ± 0.50 mm from the genial tubercle, delineating a relatively safe zone with a lower risk of hemorrhage. Conclusions: This study provides anatomical insights that contribute to appropriate preoperative planning and the minimization of complications during surgical interventions on the mandible. Full article

Background: The autogenous bone core block (BCB) is a viable, biologically advantageous, and minimally invasive alternative to other augmentation procedures for small bone defects around dental implants. This study focused specifically on horizontal vestibular defects in the mandible, a frequently encountered yet underrepresented clinical situation, to evaluate the effectiveness and predictability of bone core grafting. Methods: Cylindrical autogenous bone cores, harvested from the implant-site osteotomy using trephine drills with a 2.5 internal diameter, were stabilized with osteosynthesis screws, and implants were placed simultaneously. Initial preoperative measurements of the edentulous ridge width were performed based on cone beam computer tomography (CBCT). At 4 months postoperatively, a subsequent CBCT measurement was performed for each implant site. Results: A total of 38 augmentation procedures were analyzed with a mean horizontal bone gain of 1.8 mm (p = 0.000). Improved outcomes were observed in V-shaped defects with remaining vertical bony walls, which contributed to better graft stability and volume preservation. While Khoury et al. previously validated the general applicability of this technique across various defect types, our study refines its indication by offering a clear protocol tailored to a common clinical niche. Conclusions: The proposed BCB method proved to be a safe, efficient, and with reduced morbidity procedure, providing clinicians with a practical and evidence-based tool for predictable horizontal bone augmentation. Full article

Background/Objectives: Digital workflows for implant-supported full-arch restorations remain challenging. This study evaluated the accuracy and precision of digital impressions using reverse scan body (RSB) prototypes and intraoral scanners (IOSs) for rehabilitating fully edentulous patients following the All-on-4 protocol. Secondary objectives included comparing accuracy between expert clinicians and beginners, as well as desktop scanners and various RSB designs. Methods: An in vitro study was conducted using a fully edentulous mandible model with four Osstem TSIII implants. A final-year dental student and an expert clinician captured digital impressions using IOSs and desktop scanners. Four groups were analyzed: (A) original scan bodies with the IOS, (B) short RSBs with the IOS, (C) RSBs with desktop scanners (short sandblasted, long sandblasted, long coated), and (D) a control group using original scan bodies with a desktop scanner. Root mean square (RMS) values measured dimensional differences, with statistical analysis performed using the Wilcoxon signed-rank test and one-way ANOVA (α = 0.05). Results: A total of 42 scans were analyzed. No significant difference was found between expert and student for original scan bodies using the IOS (p = 0.220), while RSB prototypes showed significant differences (p = 0.008). No significant accuracy differences were noted between original scan bodies and RSBs with the IOS, but IOSs outperformed desktop scanners. Among RSBs scanned with desktop scanners, no significant differences were observed between designs. Conclusions: RSB prototypes are a viable alternative to original scan bodies for fully digital workflows in All-on-4 rehabilitations, with IOSs offering superior accuracy. However, proper training is crucial for optimizing RSB accuracy. Variations in height and coating did not impact overall accuracy. Full article

Background/Objectives: With the increasing use of dental implants in edentulous patients and the high prevalence of peri-implantitis, understanding its microbial and risk factors is crucial. This study investigated Romanian patients from two private dental clinics in Cluj-Napoca, Romania, diagnosed with peri-implantitis, focusing on identifying the predominant bacterial species at affected sites compared with healthy implant sites. Additionally, we examined the impact of factors such as smoking, gender, age, and prosthetic restoration type on disease prevalence. Methods: This cross-sectional study, conducted between January 2023 and December 2024, included randomly selected patients who met the predefined inclusion and exclusion criteria. We enrolled 22 patients and 50 implants in the study. Data collected from medical records, clinical evaluations, and microbiological assessments were subsequently entered into a computerized database. Clinical data were analyzed using Social Science Statistics software(Jeremy Staangroom 2018). Bacterial samples were assessed, incubated, and subsequently identified using the Vitek 2 Compact System (BioMérieux, Marcy—l’ Étoile, France). Results: Peri-implantitis incidence was found to be independent of gender, more prevalent in the mandible, and equally affected smokers and non-smokers. The disease involves a complex polymicrobial infection, with pathogenic bacteria triggering the condition and opportunistic bacteria sustaining it. Conclusions: Peri-implantitis is a complex polymicrobial infection that arises from the interaction of strict pathogenic bacteria and opportunistic bacteria. Peri-implantitis results from intricate interactions of local, systemic, and microbial factors. Identifying its causes is essential for developing effective treatments, with future research emphasizing the role of opportunistic bacteria in disease progression. Full article

Objectives: CAD-CAM technology has enabled clinicians to provide accurate and predictable restorations. Chairside time has been reduced and patient’s comfort has been improved. A fully digital workflow can be now predictably adopted in implant surgery and implant restorations. Methods: A male patient, 55 years old, was referred for the restoration of his edentulous mandible. Radiographs and clinical evaluation were assembled to plan implant placement. The flapless approach is preferred to provide for a mucosa-supported surgical guide and lessen the patient’s post-operative complications. In flapless cases, the operator does not have any direct overview of the surrounding soft tissues and underlying bone. In this case, a new, minimally invasive H-shaped incision technique was performed. A fully digital protocol is presented with a two-piece stackable surgical guide to confirm accurate implant placement. Results: A high-performance polymer framework (PEEK) combined with zirconia crowns completes the digitally designed edentulous restoration. Conclusions: Adopting this technique offers the clinician benefits in both the surgical and the restorative part. Full article

New subperiosteal dental implants were designed to offer new options to edentulous patients with severe bone resorption for whom endosseous dental implants are not advisable. In our study, we aimed to design and manufacture subperiosteal dental implants with a minimum volume to facilitate surgical maneuvers and metal coverage by mucosa while ensuring maximal long-term implant strength and functionality. With cone-beam CT-scan data obtained from an edentulous patient, a maxilla and mandible recreation were created, and subperiosteal implants were designed and analyzed with FEA (250 MPa infinite-life limit stress). We redesigned them until they stood the infinite-life limit loads mentioned above. Then, they were manufactured with Ti6Al4V alloy and laser-powder bed fusion technology. All implants withstood mechanical tests (450 N static and 150 N loads for five-million cycle 150 N fatigue tests) with no failures. The first design resulted in maxillary and mandibular implant failures. Through the redesign process, the implant volume was reduced, and the number and placement of bone fixation screws were optimized while maintaining resistance to chewing. Once manufactured, these new implants withstood the loads mentioned above without failure. Our subperiosteal dental implants are an option for edentulous patients with severe maxilla and mandibular bone resorption. Manufactured with Ti6Al4V alloy and laser-powder bed fusion technology, they withstood the above-mentioned mechanical tests without failure. Full article

Sandblasting and acid etching are common procedures used to treat implant surfaces, enhancing osseointegration and improving clinical success rates. This clinical study aimed to evaluate the long-term outcomes of sandblasted and acid-etched implants. A total of 303 implants were placed in 114 partially and totally edentulous patients using a two-stage surgical technique and an early loading protocol (6–8 weeks). Clinical findings for implants and prosthetics were evaluated over a 12-year follow-up period. A total of 12 implants (3.9%) failed, with 3 failures occurring during the healing period before loading and 9 due to peri-implantitis. The cumulative survival rate for all implants was 96.1%. A total of 156 prostheses were placed on 300 implants, 87 single crowns, 45 partial fixed bridges, 9 full-arch fixed restorations, and 15 overdentures. The mean marginal bone loss was 1.18 mm. (SD. 0.64 mm.). Thirty-nine implants (13%) in twenty-four patients exhibited peri-implantitis. Technical complications, including prosthetic screw loosening or fracture, ceramic chipping, and acrylic fractures, were observed in 24 subjects (21.1%). Sandblasted and acid-etched surface implants placed in the maxilla and mandible reported favorable outcomes and stable tissue conditions with an early loading protocol. Full article

The purpose of this study is to measure the positional accuracy of transfers during the splinting printing process using four biomaterials (two acrylic resins and two bis acrylic resins). Materials and Methods: A master model was constructed for the acrylic simulation of edentulous mandibles with four multiunit analogs (Bioinnovation, Sao Paulo, Brazil) positioned between the lateral incisor and premolar areas. Eighty samples (n = 80) were created in total. Four different dental materials, Duralay (Reliance, Chicago, IL, USA); Pattern Resin LS (GC, Tokyo, Japan) with a ratio of one part liquid and two parts powder; Structur (Vocco, Colonia, Germany); and Protemp (3 M ESPE, Neus, Germany), were used as splints with five samples each. Measurements were obtained for distances between points A, B, C, and D in sequential order through an INSIZE digital calibrator (Inzise, Taiwan, Seng, China). Results: The results were as follows: Distance A: better performance was observed for Pattern Resin (mean = 38.59 mm) and Duralay (mean = 38.58 mm) compared to the base (mean = 38.59 mm); distance B: Pattern Resin (mean = 19.08 mm) and Duralay (mean = 19.07 mm) were compared to the base (mean = 19.08 mm); distance C: no significant differences in relation to the base (prom = 18.85 mm) were shown for the three materials of Pattern Resin (prom = 18.86 mm), Structur (prom = 18.85 mm), and Duralay (mean = 18.85 mm); and distance D: Pattern Resin (mean = 20.46 mm) and Duralay (mean = 20.46 mm) provided lower performance compared to the base (mean = 20.47 mm), ANOVA (Prob = 0.333 > 0.05). Conclusions: Pattern resins and Duralay acrylic resins exhibit better dimensional stability when used as splints for the transfer of multiple dental implants. Full article

Background and Objectives: This research describes the management of mandibular fractures in edentulous patients with atrophic mandibles and implant-retained overdentures, exploring etiologies and treatment options. Materials and Methods: A retrospective study (January 2010–December 2023) was conducted on six patients from two hospitals (Hospital Gregorio Marañón y Hospital La Paz, Madrid). The data collected included fracture etiology, treatment type, and complications. Results: All six patients were women, with a mean age of 76.33 years. The most common cause of fracture was peri-implantitis (50%). Surgical treatment (open reduction and internal fixation) was performed in five patients, with different surgical approaches and fixation methods. One patient, due to multiple comorbidities, received conservative treatment. Complications occurred in 50% of cases, including delayed healing and hypoesthesia. The average hospital stay was four days, with a mean follow-up of 34 months. Conclusions: Mandibular fractures in these patients are rare. Surgical treatment using rigid fixation plates is recommended. The rational use of bone grafting should be taken into account. Treatment depends on fracture type, patient condition, and surgeon experience. Full article