Search Results (1,253)

Accurate cerebral vasculature segmentation using digital subtraction angiography (DSA) is critical for diagnosing and treating cerebrovascular diseases. However, conventional single-frame analysis methods often fail to capture fine vascular structures due to background noise, overlapping anatomy, and dynamic contrast flow. In this study, we propose a novel vessel-enhancing preprocessing technique using temporal differencing of DSA sequences to improve cerebrovascular segmentation accuracy. Our method emphasizes contrast flow dynamics while suppressing static background components by computing absolute differences between sequential DSA frames. The enhanced images were input into state-of-the-art deep learning models, U-Net++ and DeepLabv3+, for vascular segmentation. Quantitative evaluation of the publicly available DIAS dataset demonstrated significant segmentation improvements across multiple metrics, including the Dice Similarity Coefficient (DSC), Intersection over Union (IoU), and Vascular Connectivity (VC). Particularly, DeepLabv3+ with the proposed preprocessing achieved a DSC of 0.83 ± 0.05 and VC of 44.65 ± 0.63, outperforming conventional methods. These results suggest that leveraging temporal information via input enhancement substantially improves small and complex vascular structure extraction. Our approach is computationally efficient, model-agnostic, and clinically applicable for DSA. Full article

Pipelines play a vital role in material transportation within industrial settings. This review synthesizes detection technologies for early-stage small gas leaks from pipelines in the industrial sector, with a focus on acoustic-based methods, optical gas imaging (OGI), and multimodal fusion approaches. It encompasses detection principles, inherent challenges, mitigation strategies, and the state of the art (SOTA). Small leaks refer to low flow leakage originating from defects with apertures at millimeter or submillimeter scales, posing significant detection difficulties. Acoustic detection leverages the acoustic wave signals generated by gas leaks for non-contact monitoring, offering advantages such as rapid response and broad coverage. However, its susceptibility to environmental noise interference often triggers false alarms. This limitation can be mitigated through time-frequency analysis, multi-sensor fusion, and deep-learning algorithms—effectively enhancing leak signals, suppressing background noise, and thereby improving the system’s detection robustness and accuracy. OGI utilizes infrared imaging technology to visualize leakage gas and is applicable to the detection of various polar gases. Its primary limitations include low image resolution, low contrast, and interference from complex backgrounds. Mitigation techniques involve background subtraction, optical flow estimation, fully convolutional neural networks (FCNNs), and vision transformers (ViTs), which enhance image contrast and extract multi-scale features to boost detection precision. Multimodal fusion technology integrates data from diverse sensors, such as acoustic and optical devices. Key challenges lie in achieving spatiotemporal synchronization across multiple sensors and effectively fusing heterogeneous data streams. Current methodologies primarily utilize decision-level fusion and feature-level fusion techniques. Decision-level fusion offers high flexibility and ease of implementation but lacks inter-feature interaction; it is less effective than feature-level fusion when correlations exist between heterogeneous features. Feature-level fusion amalgamates data from different modalities during the feature extraction phase, generating a unified cross-modal representation that effectively resolves inter-modal heterogeneity. In conclusion, we posit that multimodal fusion holds significant potential for further enhancing detection accuracy beyond the capabilities of existing single-modality technologies and is poised to become a major focus of future research in this domain. Full article

This study presents a semi-empirical approach to generalizing the acoustic radiation generated by serrated airfoil configurations, based on small-scale aerodynamic/acoustic experiments and functional regression techniques. In the context of passive noise reduction strategies, such as leading-edge and trailing-edge serrations, acoustic measurements are performed in a controlled subsonic wind tunnel environment. Sound pressure level (SPL) spectra and acoustic power metrics are acquired for various geometric configurations and flow conditions. These spectral data are then analyzed using regression-based modeling techniques—linear, quadratic, logarithmic, and exponential forms—to capture the dependence of acoustic emission on key geometric and flow-related variables (e.g., serration amplitude, wavelength, angle of attack), without relying explicitly on predefined nondimensional numbers. The resulting predictive models aim to describe SPL behavior across relevant frequency bands (e.g., broadband or 1/3 octave) and to extrapolate acoustic trends for configurations beyond those tested. The proposed methodology allows for the identification of compact functional relationships between configuration parameters and acoustic output, offering a practical tool for the preliminary design and optimization of low-noise serrated profiles. The findings are intended to support both physical understanding and engineering application, bridging experimental data and parametric acoustic modeling in aerodynamic noise control. Full article

During the hydraulic performance experiment, significant vibration and noise were observed in the mixed-flow pump operating in the hump region. Cavitation occurrence in the impeller flow channels was confirmed through the transparent chamber. To analyze cavitation flow structure evolution in the mixed-flow pump, this paper integrates numerical and experimental approaches, capturing cavitation flow structures under the valley condition through high-speed photography technology. During the various stages of cavitation development, the cavitation forms are mostly vortex cavitation, cloud cavitation, and perpendicular vortex cavitation. Impeller rotation induces downstream transport of shedding cloud cavitation shedding structures. Flow blockage occurs when cavitation vortexes obstruct specific passages, accelerating cavitation growth that culminates in head reduction through energy dissipation mechanisms. Vortex evolution analysis revealed enhanced density of small-scale vortex structures with stronger localized core intensity in the impeller and diffuser. Despite larger individual vortex scales, reduced core intensity persists throughout the full flow domain. Concurrently, velocity profile characteristics across flow rates and blade sections (spanwise from tip to root) indicate heightened predisposition to flow separation, recirculation zones, and low-velocity regions during off-design operation. This study provides scientific guidance for enhancing anti-cavitation performance in the hump region. Full article

To investigate the effects of clearance variations induced by back wear ring wear on internal flow and noise within centrifugal pumps at the design flow rate (Q_o = 25 m³/h), a combined Computational Fluid Dynamics (CFD) and Acoustic Finite Element Method (FEM) approach was employed. The SST-SAS turbulence model and Lighthill’s acoustic analogy, were applied to simulate the internal flow and acoustic fields, respectively, across four different clearance values. The impact laws of various back wear-ring clearances on flow-induced noise were analyzed. The results indicate that the head and efficiency of the centrifugal pump gradually decrease with the increase in the back wear-ring clearance. When the clearance reaches 1.05 mm, the head drops by 4.35% and the efficiency decreases by 14.86%. The radial force on the impeller decreases, while the axial force increases and its direction reverses by 180 degrees. The acoustic source strength at the rotor–stator interface, near the volute tongue, and at the outlet of the back wear ring increases with larger clearance; furthermore, high-sound-source regions expand around the balance holes and near the impeller suction side. The dominant SPL frequency for all clearance cases was the blade passing frequency (BPF). As clearance increases, the overall SPL curve shifts upwards; however, the variation gradient decreases noticeably when the clearance exceeds 0.75 mm. The overall internal SPL increases, with the total SPL under 1.05 mm being 1.8% higher than that under 0.15 mm. In total, the optimal back ring clearance is 0.45 mm, which achieves a 38% noise reduction while maintaining a 97.9% head capacity. Full article

The transport properties of biased type II superconductors are strongly influenced by external magnetic fields, which play a crucial role in optimizing the stability and performance of low-noise superconducting electronic devices. A major challenge is the stochastic behavior of Abrikosov vortices, which emerge in the mixed state and lead to energy dissipation through their nucleation, motion, and annihilation. Uncontrolled vortex dynamics can introduce electronic noise in low-power systems and trigger thermal breakdown in high-power applications. This study examines the effect of a perpendicular external magnetic field on vortex pinning in biased YBa₂Cu₃O_7-δ devices containing laser-written, rectangular-shaped, partially deoxygenated regions (δ ≈ 0.2). The results show that increasing the magnetic field amplitude induces an asymmetry in the concentration of vortices and antivortices, shifting the annihilation line toward a region of lower flux density and altering the flux pinning characteristics. Oxygen-deficient segments aligned parallel to the current flow act as barriers to vortex motion, enhancing the net pinning force by preventing vortex–antivortex pairs from reaching their annihilation zone. The current–voltage characteristics reveal periodic voltage steps corresponding to the onset and suppression of thermally activated flux flow and flux creep. These features indicate magnetic field–tunable transport behavior within a narrow range of temperatures from 0.94·T_c to 0.98·T_c, where T_c is the critical temperature of the superconductor. These findings offer new insights into the design of vortex-motion-controlled superconducting electronics that utilize engineered pinning structures. Full article

Diffuse correlation tomography (DCT) is an emerging technique for detecting diseases associated with localized abnormal perfusion from near-infrared light intensity temporal autocorrelation functions (g₂(τ)). However, a critical drawback of traditional reconstruction methods is the imbalance between optical measurements and the voxels to be reconstructed. To address this issue, this paper proposes Conv-TransNet, a convolutional neural network (CNN)–Transformer hybrid model that directly maps g₂(τ) data to blood flow index (BFI) images. For model training and testing, we constructed a dataset of 18,000 pairs of noise-free and noisy g₂(τ) data with their corresponding BFI images. In simulation validation, the root mean squared error (RMSE) for the five types of anomalies with noisy data are 2.13%, 4.43%, 2.15%, 4.05%, and 4.39%, respectively. The MJR (misjudgment ratio)of them are close to zero. In the phantom experiments, the CONTRAST of the quasi-solid cross-shaped anomaly reached 0.59, with an MJR of 2.21%. Compared with the traditional Nth-order linearization (NL) algorithm, the average CONTRAST of the speed-varied liquid tubular anomaly increased by 0.55. These metrics also demonstrate the superior performance of our method over traditional CNN-based approaches. The experimental results indicate that the Conv-TransNet model would achieve more accurate and robust reconstruction, suggesting its potential as an alternative for blood flow imaging. Full article

In loop-powered 4–20 mA transmitter systems, sensors like temperature, pressure, flow, and gas sensors are chosen based on specific application requirements. These systems are widely adopted in high-precision measurement scenarios, including industrial automation, process control, and environmental monitoring. The transmitter requires a high-performance analog front end (AFE) for precise amplification and signal conditioning. This paper presents a low-noise instrumentation amplifier (IA) for high-precision transmitter front ends, featuring a Successive Approximation Register (SAR)-assisted offset calibration architecture. The proposed structure integrates a chopper current-feedback instrumentation amplifier (CFIA) with an automatic offset calibration loop (AOCL), significantly suppressing internal offset errors and enabling high-accuracy signal acquisition under stringent power and environmental temperature constraints. The designed amplifier provides four selectable gain settings, covering a range from ×32 to ×256. Fabricated in a 0.18 μm CMOS process, the CFIA operates at a 1.8 V supply voltage, consumes a static current of 182 μA, and achieves an input-referred noise as low as 20.28 nV/√Hz at 1 kHz, with a common-mode rejection ratio (CMRR) up to 122 dB and a power-supply rejection ratio (PSRR) up to 117 dB. Experimental results demonstrate that the proposed amplifier exhibits excellent performance in terms of input-referred noise, offset voltage, PSRR, and CMRR, making it well-suited for front-end detection in field instruments that require direct interfacing with measured media. Full article

This article presents a comprehensive experimental and theoretical study and substantiation of the hydraulic parameters of a prototype multi-gear pump. The proposed pump design, which features one drive gear and four driven gears, aims to address the common disadvantages of traditional gear pumps, including radial force imbalance, uneven flow, high acoustic noise, and increased fluid leakage. Tests of the prototype multi-stage pump were conducted on a specialized test stand in the “Hydraulics” workshop of “Hansa-Flex Hydraulik Almaty” LLP. Experimental analysis, supported by theoretical calculations, established the optimal operating speed range for the prototype to be between 900 and 1450 rpm, with the volumetric efficiency remaining stable between 70% and 88% when using VMGZ hydraulic oil (45 cSt). A significant deterioration in performance, including a sharp drop in volumetric efficiency to 30% and a decrease in the pressure generated, was observed at rotational speeds below 900 rpm due to an increase in internal leaks. In addition, this study examined the effect of kinematic viscosity, which revealed a 15–20% decrease in performance and power when using a fluid with lower viscosity (15 cSt) with a slight increase in noise level. This study also examines in detail the linear relationship between useful power and pressure in the system and analyzes noise characteristics under various operating conditions. Full article

Distributed acoustic sensing shows great potential for pipeline monitoring. However, internally deployed and unfixed sensing cables are highly susceptible to disturbances from water flow noise, severely challenging impact source localization. This study proposes a novel two-step method to address this. The first step employs Variational Mode Decomposition (VMD) combined with Short-Time Energy Entropy (STEE) for the adaptive extraction of impact signal from noisy data. STEE is introduced as a stable metric to quantify signal impulsiveness and guides the selection of the relevant intrinsic mode function. The second step utilizes the Pruned Exact Linear Time (PELT) algorithm for accurate signal segmentation, followed by an unsupervised learning method combining Dynamic Time Warping (DTW) and clustering to identify the impact segment and precisely pick the arrival time based on shape similarity, overcoming the limitations of traditional pickers under conditions of complex noise. Field tests on an operational water pipeline validated the method, demonstrating the consistent localization of manual impacts with standard deviations typically between 1.4 m and 2.0 m, proving its efficacy under realistic noisy conditions. This approach offers a reliable framework for pipeline safety assessments under operational conditions. Full article

Rust’s growing popularity in high-integrity systems requires automated vulnerability detection in order to maintain its strong safety guarantees. Although Rust’s ownership model and compile-time checks prevent many errors, sometimes unexpected bugs may occasionally pass analysis, underlining the necessity for automated safe and unsafe code detection. This paper presents Rust-IR-BERT, a machine learning approach to detect security vulnerabilities in Rust code by analyzing its compiled LLVM intermediate representation (IR) instead of the raw source code. This approach offers novelty by employing LLVM IR’s language-neutral, semantically rich representation of the program, facilitating robust detection by capturing core data and control-flow semantics and reducing language-specific syntactic noise. Our method leverages a graph-based transformer model, GraphCodeBERT, which is a transformer architecture pretrained model to encode structural code semantics via data-flow information, followed by a gradient boosting classifier, CatBoost, that is capable of handling complex feature interactions—to classify code as vulnerable or safe. The model was evaluated using a carefully curated dataset of over 2300 real-world Rust code samples (vulnerable and non-vulnerable Rust code snippets) from RustSec and OSV advisory databases, compiled to LLVM IR and labeled with corresponding Common Vulnerabilities and Exposures (CVEs) identifiers to ensure comprehensive and realistic coverage. Rust-IR-BERT achieved an overall accuracy of 98.11%, with a recall of 99.31% for safe code and 93.67% for vulnerable code. Despite these promising results, this study acknowledges potential limitations such as focusing primarily on known CVEs. Built on a representative dataset spanning over 2300 real-world Rust samples from diverse crates, Rust-IR-BERT delivers consistently strong performance. Looking ahead, practical deployment could take the form of a Cargo plugin or pre-commit hook that automatically generates and scans LLVM IR artifacts during the development cycle, enabling developers to catch vulnerabilities at an early stage in the development cycle. Full article

This study examines the hydrodynamic and acoustic performance of plain NACA0018 hydrofoil and modified NACA0018 hydrofoils (foil with a cavity on suction surface) at a Reynolds number ($Re$) of $40,000$, which is indicative of small-scale turbines and marine applications. A cavity was created on suction side surface at 40–50% of the chord length, which is chosen for its efficacy in cavitation control. The present analysis examines the impact of the cavity on lift-to-drag-ratio ($L/D$) and cavity length at three cavitation numbers ($1.7$, $1.2$, and $0.93$) for plain and modified hydrofoils. Simulations demonstrate a significant enhancement of 7% in the lift-to-drag ratio relative to traditional designed foils. Contrary to earlier observations, the cavity length increases instead of decreasing for the modified hydrofoil. Both periodic steady and turbulent inflow conditions are captured that simulate the complex cavity dynamics and flow–acoustic interactions. It is found that a reduction in RMS velocity with modified blade suggests flow stabilization. Spectral analysis using Mel-frequency techniques confirms the cavity’s potential to reduce low-frequency flow-induced noise. These findings offer new insights for designing quieter and more efficient hydrofoils and turbine blades. Full article

This study presents an algorithm for non-invasive blood pressure (BP) estimation in neonates using photoplethysmography (PPG), suitable for resource-constrained neonatal telecare platforms. Using the Windkessel model, the algorithm processes PPG signals from a MAX 30102 sensor, (Analog Devices (formerly Maxim Integrated), based in San Jose, CA, USA) filtering motion noise and extracting cardiac cycle time and systolic time (ST). These parameters inform a derived blood flow signal, the input for the Windkessel model. Calibration utilizes average parameters based on the newborn’s post-conceptional age, weight, and gestational age. Performance was validated against readings from a standard non-invasive BP cuff at SES Hospital Universitario de Caldas. Two parameter estimation methods were evaluated. The first yielded root mean square errors (RMSEs) of 24.14 mmHg for systolic and 19.13 mmHg for diastolic BP. The second method significantly improved accuracy, achieving RMSEs of 2.31 mmHg and 5.13 mmHg, respectively. The successful adaptation of the Windkessel model to single PPG signals allows for BP calculation alongside other physiological variables within the telecare program. A device analysis was conducted to determine the appropriate device based on computational capacity, availability of programming tools, and ease of integration within an Internet of Things environment. This study paves the way for future research that focuses on parameter variations due to cardiovascular changes in newborns during their first month of life. Full article

The Kuroshio Current’s flow velocity imposes exacting requirements on underwater vehicle propulsive systems. Ecological preservation necessitates low-noise propeller designs to mitigate operational disturbances. As technological evolution advances toward greater intelligence and system integration, intelligent unmanned systems are positioning themselves as a critical frontier in marine innovation. In recent years, the global research community has increased its efforts towards the development of high-maneuverability underwater vehicles. However, propeller design optimization ignores the key balance between acoustic performance and hydrodynamic efficiency, as well as the appropriate speed threshold for blade rotation. In order to solve this problem, the propeller design of the NACA 65A010 airfoil is optimized by using OpenProp v3.3.4 and XFlow 2022 software, aiming at innovating the propulsion system of shallow water agile submersibles. The study presents an integrated design framework combining lattice Boltzmann method (LBM) simulations synergized with fully Lagrangian-LES modeling, implementing rotational speed thresholds to detect cavitation inception, followed by advanced acoustic propagation analysis. Through rigorous comparative assessment of hydrodynamic metrics, we establish an optimization protocol for propeller selection tailored to littoral zone operational demands. Studies have shown that increasing the number of propeller blades can reduce the single-blade load and delay cavitation, but too many blades will aggravate the complexity of the flow field, resulting in reduced efficiency and noise rebound. It is concluded that the propeller with five blades, a diameter of 234 mm, and a speed of 500 RPM exhibits the best performance. Under these conditions, the water efficiency is 69.01%, and the noise is the lowest, which basically realizes the balance between hydrodynamic efficiency and acoustic performance. This paradigm-shifting research carries substantial implications for next-generation marine vehicles, particularly in optimizing operational stealth and energy efficiency through intelligent propulsion architecture. Full article

Ensuring a sustainable and healthy human environment in university dormitories is essential for students’ learning, living, and overall health and well-being. To address this need, we carried out a series of systematic field measurements of the noise levels at 30 dormitories in three representative major urban universities in a major provincial capital city in China and designed and implemented a comprehensive questionnaire and surveyed 1005 students about their perceptions of their acoustic environment. We proposed and applied a sustainability–health-oriented, multidimensional assessment framework to assess the acoustic environment of the dormitories and student responses to natural sound, technological sounds, and human-made sounds. Using the Structural Equation Modeling (SEM) approach combined with the field measurements and student surveys, we identified three categories and six factors on student health and well-being for assessing the acoustic environment of university dormitories. The field data indicated that noise levels at most of the measurement points exceeded the recommended or regulatory thresholds. Higher noise impacts were observed in early mornings and evenings, primarily due to traffic noise and indoor activities. Natural sounds (e.g., wind, birdsong, water flow) were highly valued by students for their positive effect on the students’ pleasantness and satisfaction. Conversely, human and technological sounds (traffic noise, construction noise, and indoor noise from student activities) were deemed highly disturbing. Gender differences were evident in the assessment of the acoustic environment, with male students generally reporting higher levels of the pleasantness and preference for natural sounds compared to female students. Educational backgrounds showed no significant influence on sound perceptions. The findings highlight the need for providing actionable guidelines for dormitory ecological design, such as integrating vertical greening in dormitory design, water features, and biodiversity planting to introduce natural soundscapes, in parallel with developing campus activity standards and lifestyle during noise-sensitive periods. The multidimensional assessment framework will drive a sustainable human–ecology–sound symbiosis in university dormitories, and the category and factor scales to be employed and actions to improve the level of student health and well-being, thus, providing a reference for both research and practice for sustainable cities and communities. Full article