Search Results (320)

As and F contamination are a global problem, and their simultaneous contamination in groundwater is a frequent occurrence, necessitating strategies for their concurrent removal. This study evaluated the performance and potential applicability of Ca-based adsorbents (CaO, Ca(OH)₂, and CaCO₃) for simultaneous As–F removal. Removal tests were performed using synthetic contaminated water with an initial As concentration of 1 mg/L and initial F concentrations of 15–60 mg/L. The results showed that CaCO₃ had difficulty removing As and F in contaminated water; in contrast, CaO and Ca(OH)₂ achieved simultaneous As–F removal under certain conditions. Regardless of the presence or absence of F, the water purified using CaO and Ca(OH)₂ met the As environmental standard (0.01 mg/L) for As(V) and As effluent standard (0.1 mg/L) for As(III). Meanwhile, with or without As, CaO- and Ca(OH)₂-treated water met the F environmental standard (0.8 mg/L) at a concentration of 15 mg/L and F effluent standard (8 mg/L for non-marine areas) at 30 and 60 mg/L. In this study, where the initial As concentration was set to a constant value, the degree of mutual effects on As and F adsorption behavior differed depending on the combination of adsorbent addition and initial F concentrations. Full article

Polymer inclusion membranes (PIMs) have undergone substantial advancements in their selectivity and efficiency, driven by their increasing deployment in separation processes, environmental remediation, and sensing applications. This review presents recent progress in the development of PIMs, focusing on strategies to enhance ion and molecule selectivity through the incorporation of novel carriers, including ionic liquids and task-specific extractants, as well as through polymer functionalization techniques. Improvements in mechanical and chemical stability, achieved via the utilization of high-performance polymers such as polyvinylidene fluoride (PVDF) and polyether ether ketone (PEEK), as well as cross-linking approaches, are critically analyzed. The expanded application of PIMs in the removal of heavy metals, organic micropollutants, and gas separation, particularly for carbon dioxide capture, is discussed with an emphasis on efficiency and operational robustness. The integration of PIMs with electrochemical and optical transduction platforms for sensor development is also reviewed, highlighting enhancements in sensitivity, selectivity, and response time. Furthermore, emerging trends towards the fabrication of sustainable PIMs using biodegradable polymers and green solvents are evaluated. Advances in scalable manufacturing techniques, including phase inversion and electrospinning, are addressed, outlining pathways for the industrial translation of PIM technologies. The review concludes by identifying current limitations and proposing future research directions necessary to fully exploit the potential of PIMs in industrial and environmental sectors. Full article

Wastewater treatment plants generally lack a specialized design for the efficient removal of sulfamethoxazole (SMX), a toxic and bio-resistant compound. In this study, secondary effluent from a Beijing wastewater reclamation treatment plant was spiked with SMX and used to investigate the filtration performance and fouling mechanisms of thermo-responsive membranes. Thermo-responsive materials were prepared using polyvinylidene fluoride, N-isopropylacrylamide (NIPAM), and graphene oxide through Ce (IV)-induced redox radical polymerization. The results showed that the removal of SMX and COD reached 42% and 92%, respectively, with a NIPAM dosage of 1 g, and the removal of UV₂₅₄ reached its highest value at 57.9%. Additionally, the filtration flux was higher at a temperature of 35 °C with a NIPAM dosage of 1 g. The fluorescence intensity of the organic matter from the secondary effluent spiked with SMX and decreased after the thermo-responsive membranes were implemented, and filtration with the membrane containing 1 g of NIPAM achieved a lower intensity at a value of 3074.6, according to the analysis of three-dimensional fluorescence excitation–emission spectroscopy. According to the extended Derjaguin–Laudau–Verwey–Overbeek theory analysis, the interfacial free energies of the thermo-responsive membrane with a 1 g dose of NIPAM were higher than the others during filtration. Full article

This study explores the enhancement of fluoride adsorption using biochar derived from the brown macroalga Sargassum polycystum, which was treated with iron oxide (Fe₃O₄). The macroalgal biomass underwent pyrolysis at 400 °C, followed by Fe₃O₄ impregnation, to improve surface functionality and create active sites for fluoride ion binding. Various factors affecting fluoride removal were systematically examined. A maximum fluoride removal effectiveness of 90.2% was attained under ideal circumstances (pH 2, 60 mg adsorbent dose, 30 mg/L fluoride concentration, and 150 min contact duration). Adsorption isotherm analysis showed that the Langmuir model provided a better fit (R² = 0.998) than the Freundlich model (R² = 0.941), with a maximum adsorption capacity (qₘ) of 3.41 mg/g, indicating monolayer adsorption on a homogeneous surface. Kinetic modeling revealed that the pseudo-second-order model best described the adsorption process (R² = 0.9943), suggesting chemisorption as the dominant mechanism, while the intraparticle diffusion model also showed a good fit (R² = 0.9524), implying its role in the rate-limiting step. Surface complexation, facilitated by the enhanced surface area and porosity of the iron-modified biochar, was identified as the primary mechanism of fluoride ion interaction. This study highlights the potential of Fe₃O₄-modified macroalgal biochar as an effective and sustainable solution for fluoride remediation in contaminated water sources. Full article

This study presents the synthesis, characterization, and application of magnetic magnetite–zirconium dioxide (Fe₃O₄–ZrO₂) nanoparticles as an efficient nanoadsorbent for fluoride removal from water. The nanoparticles were synthesized using a wet chemical co-precipitation method with Fe/Zr molar ratios of 1:1, 1:2, and 1:4, and characterized using Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS). FTIR analysis confirmed the presence of Fe₃O₄ and ZrO₂ functional groups, while XRD showed that increased Zr content led to a dominant amorphous phase. SEM and EDS analyses revealed quasi-spherical and elongated morphologies with uniform elemental distribution, maintaining the designed Fe/Zr ratios. Preliminary adsorption tests identified the Fe/Zr = 1:1 (M1) nanoadsorbent as the most effective due to its high surface homogeneity and optimal fluoride-binding characteristics. Adsorption experiments demonstrated that the material achieved a maximum fluoride adsorption capacity of 70.4 mg/g at pH 3, with the adsorption process best fitting the Temkin isotherm model (R² = 0.987), suggesting strong adsorbate–adsorbent interactions. pH-dependent studies confirmed that adsorption efficiency decreased at higher pH values due to electrostatic repulsion and competition with hydroxyl ions. Competitive ion experiments revealed that common anions such as nitrate, chloride, and sulfate had negligible effects on fluoride adsorption, whereas bicarbonate, carbonate, and phosphate reduced removal efficiency due to their strong interactions with active adsorption sites. The Fe₃O₄–ZrO₂ nanoadsorbent exhibited excellent magnetic properties, facilitating rapid and efficient separation using an external magnetic field, making it a promising candidate for practical water treatment applications. Full article

The deep defluorination of water remains a significant environmental challenge. In this work, aluminum was loaded onto the bifunctional resin S957 containing a phosphoric-sulfonic acid difunctional group for efficient fluoride removal. Al-S957 demonstrated excellent fluoride removal performance across a broad pH range. When anions and organics coexisted, Al-S957 exhibited significantly better fluoride adsorption performance compared to aluminum-loaded monofunctional resins. The adsorption followed an endothermic chemisorption process on a monolayer surface. FTIR and XPS analyses further revealed that fluoride removal relied on a ligand exchange mechanism. Column adsorption conducted over five cycles highlighted the strong practical potential of Al-S957. The results suggested that Al-S957 exhibits significant potential for practical applications. Full article

Phosphate and fluoride ions are common water pollutants whose presence and excessive discharge cause potential hazards to the environment and human health. MOF materials commonly used to remove phosphate and fluoride ions are usually in powder form, with low recovery during regeneration. Herein, to address these issues, Fe₃O₄@La-Zr-MOFs magnetic composites for phosphate and fluoride removal were fabricated by means of the hydrothermal method. The adsorption properties of the adsorbent were systematically assessed by means of adsorption experiments. The magnetic Fe₃O₄@La-Zr-MOFs exhibited a magnetic recovery efficiency of 93%, and they could maintain outstanding adsorption performance at a broad range of pH values and superior selectivity for phosphate and fluoride ions. The adsorption process conformed to the Langmuir isotherm and pseudo-second-order models, indicating that it was dominated by monomolecular chemisorption. Further characterization of the Fe₃O₄@La-Zr-MOFs before and after adsorption and kinetic thermodynamic investigation revealed that the elimination mechanism of phosphate and fluoride ions by Fe₃O₄@La-Zr-MOFs includes ion exchange, electrostatic interactions, and surface complexation. This study demonstrates that magnetic reusable Fe₃O₄@La-Zr-MOFs composites have great promise for phosphate and fluoride removal and recovery. Full article

The plateaus of north-central Mexico have an arid to semiarid climate and groundwater naturally contaminated with inorganic arsenic (iAs) and fluoride (F). Like other arid and semiarid areas, this region faces great challenges to maintain a safe supply of drinking and irrigation water. Studies conducted in the past few decades on various locations within this region have reported groundwater iAs, F, and nitrate-nitrogen (NO₃-N), and either their source, enrichment processes, health risks, and/or potential water treatments. The relevant findings are analyzed and condensed here to provide an overview of the groundwater situation of the region. Studies identify volcanic rocks (rhyolite) and their weathering products (clays) as the main sources of iAs and F and report that these solutes become enriched through evaporation and residence time. In contrast, NO₃-N is reported as anthropogenic, with the highest concentrations found in large urban centers and in agricultural and livestock farm areas. Health risks are high since the hot spots of contamination correspond to populated areas. Health problems associated with NO₃-N in drinking water may be underestimated. Removal technologies of the contaminants remain at the laboratory or pilot stage, except for the reverse osmosis filtration units fitted to selected wells within the state of Chihuahua. A recent approach to supplying drinking water free of iAs and F to two urban centers consisted of switching from groundwater to surface water. Incipient research currently focuses on the potential repercussions of irrigating crops with As-rich water. The groundwater predicaments concerning contamination, public health impact, and irrigation suitability depicted here can be applied to semiarid areas worldwide. Full article

This study evaluates CaCl₂-modified electric arc furnace (EAF) slag for fluoride removal from synthetic hydrofluoric acid (HF) wastewater. Adsorption performance was assessed under different particle sizes (850 μm–1.7 mm, 250–850 μm, and <250 μm), temperatures (25–45 °C), and initial pH values (2–11), using oxidized (EOS) and reduced (ERS) slags in raw and modified (C1, C2) forms. Characterization included isotherm modeling (Langmuir and Freundlich), X-ray diffraction (XRD), and inductively coupled plasma mass spectrometry (ICP-MS). The CaCl₂-modified slags (particularly EOS-C2 and ERS-C2) demonstrated stable performance under all conditions. ERS-C2 achieved the maximum adsorption capacity of 16.13 mg/g at 600 mg F⁻/L. EOS-C2 maintained capacities above 8.0 mg/g across pH 2–11, whereas unmodified slag showed a decline in performance above pH 5, with residual concentrations exceeding 250 mg F⁻/L and capacities dropping to 1.14–2.14 mg/g. XRD analysis indicated increased amorphization and enhancement of dicalcium silicate and brownmillerite phases after modification. Isotherm fitting showed better agreement with the Freundlich model, suggesting multilayer adsorption. Leaching tests confirmed that Cr, Cu, and As concentrations were within safe limits, while Pb and Cd were not detected. These results demonstrate the strong potential of CaCl₂-modified EAF slag as an efficient, pH-stable, and environmentally safe adsorbent for treating HF-containing industrial wastewater. Full article

Background: In recent years, thanks to the improvement of adhesive techniques, patients affected by tooth wear, related to erosion and/or parafunctional habits, can undergo restoration by adding only what has been lost of their dentition (additive approach). However, since not all clinicians are convinced that dental rehabilitation should be proposed in the early stages of exposed dentin, several treatments are often postponed. It is important to emphasize that, in the early stages, the clinical approach should remain conservative, focusing on dietary counseling, the modification of harmful habits, fluoride application, and risk factor management. Only when these preventive and non-invasive strategies prove insufficient, and the condition continues to progress, should invasive restorative treatments be considered. Unfortunately, epidemiological studies are reporting an increase in the number of young patients affected by erosive tooth wear, and not intercepting these cases earlier could lead to a severe degradation of the affected dentition. In addition, parafunctional habits are also becoming more frequent among patients. The combination of erosion and attrition can be very destructive, and may progress rapidly once dentin is exposed and the risk factors remain unaddressed. The aim of this report was to present a conservative full-mouth rehabilitation approach for severe erosive lesions and to provide a 10-year follow-up assessing the biological, functional, and esthetic outcomes. Methods: In this article, the postponed restorative treatment of a patient, suffering from severe tooth wear, is illustrated. The patient had sought dental treatment in the past; however, due to the already very compromised dentition, a conventional but very aggressive treatment was proposed and refused. Four years later, when the patient finally accepted an alternative conservative therapy, the tooth degradation was very severe, especially at the level of the maxillary anterior teeth. The combination of three different approaches, Speed-Up Therapy, BOPT (Biologically-Oriented Preparation Technique), and the 3 Step Technique, however, improved the capacity to successfully complete the difficult therapeutic task. Results: The biological goals (maintenance of the pulp vitality of all of the teeth and the minimal removal of healthy tooth structure) were accomplished, relying only on adhesive techniques. Conclusions: The overall treatment was very comfortable for the patient and less complicated for the clinician. At 10-year follow-up, biological, functional, and esthetic success was still confirmed. Full article

A macrocyclic receptor based on azopyrrole and polyether was synthesized, and its structure was characterized by NMR (¹H and ¹³C), HRMS and X-ray crystallography. In the solid state, the macrocyclic molecules could bind methanol through a pair of N-H…O hydrogen bonds and further self-assembled into tubular structures through C-H…N hydrogen bonds. This revealed that the crystal could still keep its porous properties after the included molecules were removed. The UV–Vis titration indicates that the macrocylic receptor can chromogenically and selectively sense fluoride ion in DMSO solution, and the sensing mechanism was rationalized by ¹H NMR. Full article

Elevated fluoride levels in drinking water pose a significant health risk for communities relying on groundwater in the Ethiopian Central Rift Valley. This study aims at characterizing real groundwater samples from the Ethiopian Central Rift Valley and evaluating the performance of an integrated membrane process based on reverse osmosis (RO) and membrane crystallization (MCr) for fluoride removal and its recovery as mixed fluoride salts. Groundwater analysis revealed fluoride concentrations of 20.8 mgL⁻¹ at the Meki-01 site and 22.7 mgL⁻¹ at the Meki-02 site, both exceeding the WHO guideline of 1.5 mgL⁻¹. In addition, total dissolved solids exceeded 1000 mgL⁻¹ at both sites, classifying the water as brackish. A commercial RO membrane demonstrated excellent fluoride and ion rejection, with fluoride removal rates exceeding 99%. The total dissolved solids (TDS) removal efficiency reached 89%. The mean water permeability of the membrane was 4.52 Lm⁻²h⁻¹bar⁻¹. The retentate produced in the RO unit reached a concentration of 70 mgL⁻¹, which was then treated using osmotic membrane distillation–crystallization (OMD-Cr) and/or vacuum membrane crystallization (VM-Cr). This process facilitated the recovery of mixed salts while achieving an almost zero-liquid discharge. The study confirms the successful removal of fluoride and its recovery as mixed salt, along with the recovery of water in an environmentally friendly and manageable way. Full article

As an essential trace element in the human body, fluoride is beneficial in appropriate amounts, but excessive intake can cause serious harm. Therefore, addressing the global water pollution caused by fluoride is an urgent issue. In this study, a functional composite membrane is successfully prepared using Enteromorpha prolifera (EP) as the raw material, cinnamaldehyde (CIN) as a functional modifier, and EP-bioinduced ZrO₂ nanoparticles (NPs) as the loading material via biomimetic mineralization technology. The experimental results demonstrate that the composite membrane removes fluoride ions (F⁻) with an efficiency of over 99.9% within the concentration range of 100–400 mg/L. This excellent F⁻ removal performance is attributed to the ability of the hydroxyl groups on the surface of ZrO₂ to exchange and bind with F⁻. The formed CIN/EP-ZrO₂ composite membrane also reveals significant antibacterial activity against E. coli. In addition, the adsorption rate for methylene blue at the concentration of 5–300 mg/L reaches 99.99%, which is due to the synergistic interaction of functional groups such as hydroxyl (-OH), carboxyl (-COOH), and amino groups (-NH₂) in EP. The overall sustainability footprint (OSF) assessment exhibits that the CIN/EP-ZrO₂ composite membrane has comprehensive advantages, including a simple preparation process, low cost, high performance, and environmental friendliness. This study provides an innovative solution for the sustainable treatment of F⁻, bacteria, and dye pollution in water, showcasing significant potential for applications in environmental science. Full article

Extreme precipitation events are one of the common hazards in eastern Texas, generating a large amount of storm water. Water running off urban areas may carry non-point source (NPS) pollution to natural resources such as rivers and lakes. Urbanization exacerbates this issue by increasing impervious surfaces that prevent natural infiltration. This study evaluated the efficacy of rain gardens, a nature-based best management practice (BMP), in mitigating NPS pollution from urban stormwater runoff. Stormwater samples were collected at inflow and outflow points of three rain gardens and analyzed for various water quality parameters, including pH, electrical conductivity, fluoride, chloride, nitrate, nitrite, phosphate, sulfate, salts, carbonates, bicarbonates, sodium, potassium, aluminum, boron, calcium, mercury, arsenic, copper iron lead magnesium, manganese and zinc. Removal efficiencies for nitrate, phosphate, and zinc exceeded 70%, while heavy metals such as lead achieved reductions up to 80%. However, certain parameters, such as calcium, magnesium and conductivity, showed increased outflow concentrations, attributed to substrate leaching. These increases resulted in a higher outflow pH. Overall, the pollutants were removed with an efficiency exceeding 50%. These findings demonstrate that rain gardens are an effective and sustainable solution for managing urban stormwater runoff and mitigating NPS pollution in eastern Texas, particularly in regions vulnerable to extreme precipitation events. Full article

Through the application of advanced membrane modification strategies, high-performance membranes have been developed to effectively remove organic contaminants such as toluene and xylene from wastewater. These membranes demonstrate superior antifouling resistance and long-term operational stability, offering a competitive advantage for semiconductor wastewater treatment. This study introduces a novel approach to membrane fabrication using polyvinylidene fluoride (PVDF), recognized for its cost-effectiveness and distinct antifouling properties in contaminant removal. To enhance the performance of the membrane, the solvent (DMA, DMF, NMP) that dissolves PVDF and the immersion time (30 min, 60 min, 90 min) at which phase separation occurs were identified. Additionally, the membranes were treated with polyvinyl alcohol (PVA) through multiple dip coatings to enhance their hydrophilicity before a comparative analysis was conducted. The resulting optimized membranes demonstrated high emulsion fluxes (4412 $\mathrm{L}{\mathrm{m}}^{-2}{\mathrm{h}}^{-1}{\mathrm{bar}}^{-1}$ for toluene) and achieved oil-removal efficiencies exceeding 90% when tested with various organic solvents, including toluene, cyclohexane, xylene, benzene, and chloroform. The resulting optimized membranes prove to be a reliable means of producing clean water and of efficiently separating organic contaminants from wastewater. Showcasing remarkable antifouling capabilities and suitability for repeated use without significant efficiency loss, this solution effectively addresses cost and fouling challenges, presenting it as a sustainable and efficient wastewater treatment method for the semiconductor industry. Full article