Search Results (48)

Seventy-one percent of the Earth’s surface is covered by water, with groundwater being one of the most important natural resources globally. In Purba Medinipur, the population growth rate has surged to ~0.75% per annum, outpacing that of West Bengal, due to agricultural and industrial development. Urbanization has led to an increase in the built-up area by 139.10% per annum, which has reduced the percolation of water into the groundwater table. Currently, 72% blocks are affected by salinity. Groundwater quality parameters such as pH, total dissolved solids (TDS), turbidity, iron, manganese, total hardness, and chloride were assessed over three seasons—pre-monsoon, monsoon, and post-monsoon—using 326 data points from 2015 to 2022. Turbidity and iron are the primary concerns for groundwater quality, contributing to pollution. Other parameters, including TDS and total hardness, were approaching acceptable limits across all seasons. Since 2021, turbidity has exceeded permissible limits during the pre-monsoon season, resulting from the dissolved minerals and seawater intrusion. The arithmetic weighted groundwater quality index has shown an increasing magnitude over time, indicating a decline in drinking water quality by 2030. The pre-monsoon season exhibits the most severely affected groundwater quality. Principal component analysis indicated that TDS and chloride are the major contaminants during the pre-monsoon, confirming seawater intrusion. In other seasons, metals like iron, TDSs, and manganese are significant contaminants. The hydraulic barriers, subsurface dams, and hybrid treatment can be adopted in the study area to abate the increasing groundwater quality concentration both on a yearly and seasonal basis. Full article

The decarbonization of hard-to-abate sectors remains a significant challenge in achieving net-zero emissions targets. These industries depend on energy-dense fuels, making direct electrification and the direct use of hydrogen technically and economically challenging. Electrofuels present a promising pathway to reducing emissions while leveraging surplus renewable energy. This review evaluates the feasibility of electrofuels for deep decarbonization, focusing on production processes, energy demands, and economic viability. Environmental performance is discussed in terms of lifecycle greenhouse gas (GHG) emissions, carbon circularity considerations, and energy conversion efficiencies, while techno-economic feasibility is evaluated using metrics such as levelized cost of hydrogen (LCOH), CO₂ capture costs, and projected fuel production costs. The review indicates that while electrofuels can achieve substantial lifecycle emission reductions up to 40–90%, depending on pathway and electricity source, their deployment remains constrained by high energy demand, conversion losses, and capital costs. Projected reductions in LCOH to below $2.1/kg by 2030 and declining renewable electricity costs could significantly improve competitiveness, particularly in regions with abundant solar and wind resources. However, substantial trade-offs exist between efficiency, infrastructure compatibility, scalability, and carbon neutrality across different electrofuel routes. The review identifies key technological bottlenecks, cost drivers, and research priorities necessary to position electrofuels as a strategic solution for deep decarbonization in sectors where direct electrification is not feasible. Full article

In Latin America, sustainable commitments towards decarbonizing hard-to-abate industrial sectors have identified hydrogen (H2) as a key enabler for the energy transition. This study develops a policy analytical framework to enhance the green H2 economy, using Argentina as the central case study. Key insights from this study include identifying often-overlooked social challenges within the H2 economy and proposing the integration of social indicators into policy design, with a particular focus on the territorial dynamics of Patagonia, labor conditions, Indigenous participation, governance, and community impacts. Drawing from Social Life Cycle Assessment (S-LCA) guideline standards and H2 justice approach, this study highlights key social hotspots that existing S-LCA tools overlook due to their lack of specific focus on regional territories and their communities. The analysis combines six social impact categories, namely, human rights, working conditions, health and safety, cultural heritage, governance, and socio-economic repercussions as recommended by the United Nations Environmental Program (UNEP), analyzed at three levels, and complemented by the H2 justice approach for Argentina’s potential green H2 production sector. These policy recommendations aim to foster a more resilient and sustainable development of the green H2 industry. Full article

This study addresses the decarbonisation of the glass industry from an integrated energy system perspective, analysing the role of renewable electricity, furnace electrification, and hydrogen in meeting the high and continuous thermal demands of glass melting. While direct electrification represents the most energy-efficient option, its implementation is challenged by the intermittent nature and limited operating hours of renewable generation, scale constraints, and technological limitations in replacing fossil-based processes, highlighting a potential complementary role for hydrogen. A general methodological framework is first developed and then applied to a representative oxyfuel glass furnace using mixed-integer linear programming (MILP) optimisation that minimises melting costs while accounting for variable solar and wind generation, battery storage, and hydrogen production and storage. The results show that high levels of furnace electrification combined with wind-dominated renewable supply yield the lowest decarbonisation costs, which can become negative at moderate decarbonisation levels. Under the current solar–wind capacity expansion mix, the integration of battery and hydrogen storage extends achievable emission reductions from around 50% to 80%, with hydrogen acting as a complementary solution to electrification. Sensitivity analysis of energy and carbon prices, as well as technology investment costs, identifies the economic conditions in which storage-based solutions become cost-effective, highlighting the strategic role of hydrogen under conditions of low electricity prices and high fuel prices. The findings demonstrate viable pathways for deep decarbonisation of the glass sector and provide a transferable methodological framework for optimal renewable energy integration in other hard-to-abate industrial sectors facing similar constraints. Full article

Carbon capture, utilization, and storage (CCUS) play an increasingly important role in climate mitigation strategies by addressing industrial emissions and enabling pathways toward net-negative emissions. A key challenge lies in determining the pathway of captured CO₂, whether through permanent geological storage or conversion into value-added products to enhance system viability. As hard-to-abate sectors and the power industry remain major sources of emissions, a comprehensive assessment of the technical, environmental, and economic performance of CCUS pathways is essential. This study evaluates bioenergy with carbon capture and storage/utilization (BECCUS) in the context of the Polish energy sector. Techno-environmental performance was assessed across three pathways: CO₂ storage in saline formations, CO₂ mineralization, and methanol synthesis. The results show levelized costs of 59.9 EUR/tCO_2,in for storage, 109.7 EUR/tCO_2,in for mineralization, and 631.1 EUR/tCO_2,in for methanol production. Corresponding carbon footprints (including full chain emissions) were −936.4 kgCO_2-eq/tCO_2,in for storage, −460.6 kgCO_2-eq/tCO_2,in in for mineralization, and 3963.4 kgCO_2-eq/tCO_2,in for methanol synthesis. These values highlight the trade-offs between economic viability and climate performance across utilization and storage options. The analysis underscores the potential of BECCS to deliver net-negative emissions and supports strategic planning for CCUS deployment in Poland. Full article

Climate change mitigation demands scalable, technologically mature solutions capable of addressing emissions from hard-to-abate sectors. Carbon Capture and Storage (CCS) offers one of the few ready pathways for deep decarbonization by capturing CO₂ at large point sources and securely storing it in deep geological formations. The long-term viability of CCS depends on well control strategies/injection schedules that maximize storage capacity, maintain containment integrity, ensure commercial deliverability and remain economically viable. However, current practice still relies heavily on manual, heuristic-based well scheduling, which struggles to optimize storage capacity while minimizing by-products such as CO₂ recycling within the high-dimensional space of interdependent technical, commercial, operational, economic and regulatory constraints. This study makes two contributions: (1) it systematically reviews, maps and characterizes these multidimensional constraints, framing them as an integrated decision space for CCS operations, and (2) it introduces an industry-ready optimization framework—Automated Optimization of Well control Strategies through Dynamic Time–Space Discretization—which couples reservoir simulation with constraint-embedded, hierarchical refinement in space and time. Using a modified genetic algorithm, injection schedules evolve from coarse to fine resolution, accelerating convergence while preserving robustness. Applied to a heterogeneous saline aquifer model, the method was tested under both engineering and financial objectives. Compared to an industry-standard manual schedule, optimal solutions increased net stored CO₂ by 14% and reduced recycling by 22%, raising retention efficiency to over 95%. Under financial objectives, the framework maintained these technical gains while increasing cumulative cash flow by 23%, achieved through leaner, smoother injection profiles that minimize costly by-products. The results confirm that the framework’s robustness, scalability and compatibility with commercial simulators make it a practical pathway to enhance CCS performance and accelerate deployment at scale. Full article

This paper introduces cognitive adaptivity as a novel framework for addressing human factors in cybersecurity during the Industry 5.0–6.0 transition, with a focus on hard-to-abate industries where digital transformation intersects sustainability constraints. While the integration of IoT, automation, digital twins, and artificial intelligence expands industrial efficiency, it simultaneously exposes organizations to increasingly sophisticated social engineering and AI-powered attack vectors. Traditional resilience-based models, centered on recovery to baseline, prove insufficient in these dynamic socio-technical ecosystems. We propose cognitive adaptivity as an advancement beyond resilience and antifragility, defined by three interrelated dimensions: learning, anticipation, and human–AI co-evolution. Through an in-depth case study of the ceramic value chain, this research develops a conceptual model demonstrating how organizations can embed trust calibration, behavioral evolution, sustainability integration, and systemic antifragility into their cybersecurity strategies. The findings highlight that effective protection in Industry 6.0 environments requires continuous behavioral adaptation and collaborative intelligence rather than static controls. This study contributes to cybersecurity literature by positioning cognitive adaptivity as a socio-technical capability that redefines the human–AI interface in industrial security. Practically, it shows how organizations in hard-to-abate sectors can align cybersecurity governance with sustainability imperatives and regulatory frameworks such as the CSRD, turning security from a compliance burden into a strategic enabler of resilience, competitiveness, and responsible digital transformation. Full article

Addressing the critical need for sustainable, high-density hydrogen (H₂) carriers to decarbonize the global energy landscape, this paper presents a comprehensive critical review of ammonia’s pivotal role in the energy transition, with a specific focus on its application in the transportation sector. While H₂ is recognized as a future fuel, its storage and distribution challenges necessitate alternative vectors. Ammonia (NH₃), with its compelling advantages including high volumetric H₂ density, established global infrastructure, and potential for near-zero greenhouse gas emissions, emerges as a leading candidate. This review uniquely synthesizes the evolving landscape of sustainable NH₃ production pathways (e.g., green NH₃ from renewable electricity) with a systematic analysis of technological advancements to investigate its direct utilization as a transportation fuel. The paper critically examines the multifaceted challenges and opportunities associated with NH₃-fueled vehicles, refueling infrastructure development, and comprehensive safety considerations, alongside their environmental and economic implications. By providing a consolidated, forward-looking perspective on this complex energy vector, this paper offers crucial insights for researchers, policymakers, and industry stakeholders, highlighting NH₃’s transformative potential to accelerate the decarbonization of hard-to-abate transportation sectors and contribute significantly to a sustainable energy future. Full article

The paper investigates the potential of co-electrolysis as a viable pathway for hydrogen production and industrial decarbonization, expanding on previous studies on water electrolysis. The analysis adopts a general and critical perspective, aiming to assess the realistic scope of this technology with regard to current energy and environmental needs. Although co-electrolysis theoretically offers improved efficiency by simultaneously converting H₂O and CO₂ into syngas, the practical advantages are difficult to consolidate. The study highlights that the energetic margins of the process remain relatively narrow and that several key aspects, including system irreversibility and the limited availability of CO₂ in many contexts, significantly constrain its applicability. Despite the growing interest and promising technological developments, co-electrolysis still faces substantial challenges before it can be implemented on a larger scale. The findings suggest that its success will depend on targeted integration strategies, advanced thermal management, and favorable boundary conditions rather than on the intrinsic efficiency of the process alone. However, there are specific sectors where assessing the implementation potential of co-electrolysis could be of interest, a perspective this paper aims to explore. Full article

The Middle East and North Africa region has not played a major role in climate action so far, and several countries depend economically on fossil fuel exports. However, this is a region with vast solar energy resources, which can be exploited affordably for power generation and hydrogen production at scale to eventually reach carbon neutrality. In this paper, we elaborate on the case of the United Arab Emirates and explore the aspirations and feasibility of its net-zero by 2050 target. While we affirm the concept per se, we also highlight the technological complexity and economic dimensions that accompany such transformation. We expect the UAE’s electricity demand to triple between today and 2050, and the annual green hydrogen production is expected to reach 3.5 Mt, accounting for over 40% of the electricity consumption. Green hydrogen will provide power-to-fuel solutions for aviation, maritime transport and hard-to-abate industries. At the same time, electrification will intensify—most importantly in road transport and low-temperature heat demands. The UAE can meet its future electricity demands primarily with solar power, followed by natural gas power plants with carbon capture, utilization and storage, while the role of nuclear power in the long term is unclear at this stage. Full article

CO₂ geological storage (CGS) is critical for mitigating emissions in hard-to-abate industries under carbon neutrality. However, its implementation faces significant challenges. This paper examines CO₂-trapping mechanisms and proposes key safety measures: the continuous monitoring of in situ CO₂ migration and formation pressure dynamics to prevent remobilization, and pre-injection lithological analysis to assess mineral trapping potential. CO₂ injection alters reservoir stresses, inducing surface deformation; understanding long-term rock mechanics (creep, damage) is paramount. Thermomechanical effects from supercritical CO₂ injection pose risks to caprock integrity and fault reactivation, necessitating comprehensive, multi-scale, real-time monitoring for leakage detection. Geostatistical analysis of well log and seismic data enables realistic subsurface characterization, improving numerical model accuracy for risk assessment. This review synthesizes current CGS knowledge, analyzes technical challenges, and aims to inform future site selection, operations, and monitoring strategies. Full article

Kazakhstan, a fossil-fuel-dependent economy, faces growing pressure to reduce greenhouse gas emissions while maintaining industrial competitiveness. Carbon Capture, Utilization, and Storage (CCS/CCUS) technologies offer a viable pathway for decarbonizing hard-to-abate sectors, particularly in power generation, metallurgy, and oil and gas processing. This paper provides a comprehensive review of the state of CCS/CCUS technologies globally and examines their applicability within Kazakhstan. The study also explores long-term CO₂ storage mechanisms and monitoring frameworks, with attention to carbon leakage risks and the importance of addressing methane emissions. A critical part of the analysis is dedicated to Kazakhstan’s Emissions Trading System, identifying its current limitations such as low carbon prices, and limited sectoral coverage, and outlining practical reforms to enhance its role in supporting CCS/CCUS and broader decarbonization efforts. The integration of CCS/CCUS with a strengthened ETS, combined with access to international climate finance instruments and voluntary carbon markets, is proposed as a key strategy for Kazakhstan’s transition to a low-carbon economy. By linking engineering innovation with targeted policy interventions, this study offers a dual-perspective contribution. It not only provides technical insights into CCS/CCUS technologies but also presents policy recommendations that are specifically tailored to Kazakhstan’s context. The findings reinforce the role of CCS/CCUS as a crucial component of national climate strategy and industrial transformation. Full article

The transition to a sustainable energy future hinges on the development of reliable large-scale hydrogen storage solutions to balance the intermittency of renewable energy and decarbonize hard-to-abate industries. Underground hydrogen storage (UHS) in salt caverns emerged as a technically and economically viable strategy, leveraging the unique geomechanical properties of salt formations—including low permeability, self-healing capabilities, and chemical inertness—to ensure safe and high-purity hydrogen storage under cyclic loading conditions. This review provides a comprehensive analysis of the advantages of salt cavern hydrogen storage, such as rapid injection and extraction capabilities, cost-effectiveness compared to other storage methods (e.g., hydrogen storage in depleted oil and gas reservoirs, aquifers, and aboveground tanks), and minimal environmental impact. It also addresses critical challenges, including hydrogen embrittlement, microbial activity, and regulatory fragmentation. Through global case studies, best operational practices for risk mitigation in real-world applications are highlighted, such as adaptive solution mining techniques and microbial monitoring. Focusing on China’s regional potential, this study evaluates the hydrogen storage feasibility of stratified salt areas such as Jiangsu Jintan, Hubei Yunying, and Henan Pingdingshan. By integrating technological innovation, policy coordination, and cross-sector collaboration, salt cavern hydrogen storage is poised to play a pivotal role in realizing a resilient hydrogen economy, bridging the gap between renewable energy production and industrial decarbonization. Full article

Decarbonization has become a central policy and industrial priority across the European Union, driven by increasingly ambitious climate targets. The EU’s regulatory framework now mandates a 55% reduction in CO₂ emissions by 2030 (compared to 1990 levels), with the overarching goal of achieving climate neutrality by 2050. This challenge is particularly critical for energy-intensive and hard-to-abate sectors, such as the glass industry. This paper begins with a brief overview of the relevant EU regulations and the structure of the Italian glass sector. It then identifies seven key decarbonization levers applicable to the industry. Drawing on literature data and expert consultations, these levers are integrated into two main decarbonization strategies tailored to the Italian context, both aligned with the 2050 net-zero target. This study further analyzes the estimated implementation costs, the barriers associated with each lever, and potential solutions to overcome them. Finally, Italian strategies are compared with decarbonization approaches adopted in other major European countries. The findings indicate that the transition to climate neutrality in the glass sector, while technically and economically plausible, remains highly contingent on the timely deployment of enabling technologies, the alignment of regulatory and financial frameworks, and the establishment of sustained, structured cooperation between industrial stakeholders and public authorities. Full article

To pursue the total decarbonization goal set at 2050, the introduction of hydrogen to replace the usage of fossil fuel in hard-to-abate industrial sectors is crucial. Hydrogen will replace natural gas in hard-to-abate sectors where natural gas is required to make heat necessary for the industrial process. Naturally, all this is worthwhile if hydrogen is produced following a green pathway, meaning that it is connected with renewable sources. In this manuscript, a techno-economic analysis related to a real case scenario is carried out. The real system addressed involves continuous high-temperature industrial furnace operation with a seasonally variable but stable thermal energy demand, representing typical conditions of hard-to-abate industrial processes. Solar photovoltaic panels combined with batteries are used to generate and store electricity that in turn is used to generate green hydrogen. Different scenarios are considered, including mixed natural gas/hydrogen, the seasonal variability of industrial needs, and the variability of solar production. The economic aspects considered include the usage of anion exchange membrane water electrolyzers (AEMWEs) to produce green hydrogen, the improvement in efficiency during operations (operational costs, OPEX), and the decrease in the AEMWE cost (Capital expenditures, CAPEX) that occur over time. The study shows that the hydrogen production cost could decrease from 12.6 EUR kg⁻¹ in 2024 to 9.7 EUR kg⁻¹ in 2030, with further reduction to 8.7 EUR kg⁻¹ achievable through seasonal blending strategies. CO₂ emissions are significantly reduced through partial displacement of natural gas with green hydrogen, highlighting the environmental potential of the system. Full article