Search Results (268)

In the Philippines’ agricultural setup, pre-harvest cacao (Theobroma cacao) fruits are wrapped with low-density polyethylene (LDPE) for moisture retention and damage protection. Responding to the growing concern for its waste volume and scarcity of treatment, this research explores the co-hydrothermal carbonization (co-HTC) of cacao shells (CS) and LDPE as a method to convert agricultural waste with plastic into hydrochar for potential energy applications. Thus, observations on the thermal, physicochemical, and morphological changes from feedstocks to hydrochar are carried out. Optimal conditions of 200 °C for 60 min resulted in hydrochar with 21.11 MJ/kg and appreciable thermal properties. SEM micrographs show that hydrochar had increased surface area, a good fuel characteristic, and surface flaking on oversized LDPE film, suggesting relative LDPE degradation. EDX analysis reveals C, K, Ca, and Zn metals that affect chemical pathways. FTIR analysis further supports chemical synergy by preservation of functional groups innate from both parent materials. Kinetic and thermal evolutions are also investigated to reveal the influence of pretreatment on the stability of cacao shell-dominated hydrochar and the effectivity of biomass integration to facilitate relatively easier cracking of LDPE. The findings support co-HTC as a viable technology to enhance the circular economy by valorizing LDPE and cacao shells while promoting energy recovery and solid fuel production. Full article

The reliability of adhesive bonding to CAD/CAM resin composites is influenced not only by material composition and surface treatment but also by the testing methodology used to assess bond strength. However, the impact of different shear bond strength (SBS) test configurations remains insufficiently clarified. This study evaluated the influence of different surface pretreatment protocols and SBS test methods on the bonding performance of a self-adhesive resin cement to two CAD/CAM materials: a conventional particulate-filled composite (Cerasmart 270) and an experimental short glass fiber-reinforced composite (SFRC CAD). Specimens (14 × 12 × 3 mm; n = 80 per material) were ground with 320-grit silicon carbide paper and divided according to surface pretreatment: airborne-particle abrasion (APA) or APA followed by hydrofluoric acid application for 60 s (APA + HF). Each group was further subdivided based on the SBS test method using either resin cement cylinders fabricated with a custom transparent mold (diameter: 3.6 mm; height: 3 mm) or metallic cylinders cemented to the treated surface. Half of the specimens were tested after 48 h of water storage, while the remainder underwent hydrothermal aging by boiling in water for 16 h prior to testing. Material type, SBS test method, surface pretreatment, and aging significantly affected bond strength (p < 0.05). The metallic cylinder method produced higher SBS values than the transparent mold technique, particularly for SFRC CAD. APA + HF tended to reduce SBS in Cerasmart 270, particularly after aging, whereas SFRC CAD showed comparable or higher bond strength values with APA alone. Aging decreased SBS in most groups. Overall, bond strength was influenced by both material type and test methodology. Within the limitations of this study, airborne-particle abrasion alone may be sufficient for SFRC CAD materials, while additional HF treatment may not provide further benefit. These findings highlight the importance of considering both material characteristics and test configuration when interpreting laboratory bond strength data. Full article

Background: In this study, type B gelatin was extracted from Oreochromis niloticus scales under hydrothermal conditions at 60 °C to evaluate the effect of ultrasound-assisted pretreatment on its structural, physicochemical, thermal, and functional properties. Methods: Gelatin obtained with and without ultrasound pretreatment was systematically characterized through molecular weight analysis, proteomic profiling, size determination, surface morphology, proximate composition, thermal behavior, and gelation-related functional properties in order to assess the influence of the extraction method on gelation performance. Results: Ultrasound pretreatment slightly increased gelatin yield from 1.46 to 1.70%, indicating enhanced collagen solubilization. Proteomic analysis confirmed the predominance of fibrillar collagen proteins in both samples, although differences in protein distribution were observed. Furthermore, weight-average molecular weight analysis revealed a reduction from 212.3 ± 11.8 to 170.9 ± 13.2 kDa in the ultrasound-treated sample, suggesting partial fragmentation of collagen chains induced by cavitation effects. Structural modifications were also reflected in increased porosity and surface changes, contributing to improved colloidal stability. However, these changes significantly affect the functional behavior of the gelatin. Ultrasound-treated sample exhibited limited gel-forming capacity and failed to form stable gels at the evaluated concentration, despite complete dissolution. In contrast, gelatin extracted without ultrasound treatment retained higher-molecular-weight fractions and formed stable gels at both 5 and 10% (w/w). Thermal and spectroscopic analyses suggested that the fundamental collagen structure was preserved in both samples, although differences were observed in thermal degradation behavior. Conclusions: These results highlight the importance of controlling ultrasound-assisted extraction conditions to balance collagen recovery with the preservation of molecular integrity required for gelation, providing insights for the development of sustainable fish-derived biomaterials for pharmaceuticals and biomedical applications. Full article

Rising global municipal solid waste (MSW) generation poses severe environmental and resource challenges, necessitating sustainable management strategies beyond landfilling. This review critically synthesizes thermochemical waste-to-energy (WtE) technologies, including incineration, pyrolysis, gasification, and hydrothermal carbonization, as viable pathways for converting heterogeneous MSW into energy (electricity, heat, syngas, bio-oil) and valuable materials (biochar, ash for construction). Drawing on recent literature, it highlights their superior greenhouse gas reductions, energy recovery efficiencies, and residue valorization potential compared to traditional disposal, while addressing persistent limitations such as feedstock variability, tar formation, high capital costs, and stringent emission controls. Advanced variants and integration with circular economy principles enhance feasibility, particularly in diverse regional contexts. Despite technical and economic barriers, thermochemical WtE offers a transformative approach to resource-efficient waste management, supporting zero-waste goals and renewable energy transitions when combined with optimized pre-treatment, policy incentives, and ongoing innovation in process efficiency and pollutant mitigation. Full article

With no precedent in the literature, steel slag, an inexpensive and plentiful by-product of the steel industry, was discovered to be a highly selective and active catalyst for the hydrodeoxygenation (HDO) of triglycerides and fatty acids. This material, which is not always recyclable, proved to perform in the virgin state (without any chemical pretreatment), actually fostering the conversion, via a hydrothermal reaction, of palmitic and stearic acids into the corresponding (C16 and C18) alkanes with selectivity above 90%. In addition, by moving to a more complex system such as soybean oil, a complete conversion and the possibility of recycling the catalyst were maintained. Catalytic material, which came from an Italian steel industry (Acciaierie d’Italia), was characterized by XRF, XRD, N₂ physisorption analyses, TPR, and TPD techniques. Catalytic performance was successfully correlated with the characterization results, and mechanistic proofs were provided on the catalytic role played by the several iron species present in the slag. The results reported in this work represent a significant contribution to the large-scale production of green diesel and, thanks to the possibility of using a catalyst based on steel slag in HDO processes, open the way to decarbonization and climate neutrality processes. Full article

The development of sustainable biorefining processes is essential for increasing the value of lignocellulosic resources and reducing the environmental footprint of the forest-based industry. Birch wood is one of Latvia’s most abundant renewable feedstocks, yet current catalytic technologies for furfural production—primarily based on sulfuric acid (H₂SO₄)—cause extensive cellulose degradation and generate sulfur-containing residues that hinder further valorization. This study proposes an integrated biorefining approach in which orthophosphoric acid (H₃PO₄) is utilized as an alternative catalyst to selectively convert hemicellulose into furfural and acetic acid while preserving cellulose in birch veneer chips (BVC). The experimental plan was based on a full central composite circumscribed (CCC) response surface methodology (RSM) design, which consists of factorial points, axial (star) points, and centre points. In total, 26 experimental runs were performed, including 24 non-centre points (comprising both factorial and axial points (±α)) and two centre points. The optimized conditions enabled high acetic acid yields (6.29–6.48% o.d.m., corresponding to 98–100% of theoretical), furfural yields of 8.75–10.41% o.d.m. (57–68% of theoretical), and exceptional glucan preservation (38.84–40.92% o.d.m., 94–99% of theoretical). Compared with sulfuric acid pretreatment, the H₃PO₄-based process significantly reduced cellulose degradation and improved the suitability of the resulting lignocellulosic residue for subsequent 5-hydroxymethylfurfural (5-HMF) production and other biorefining routes. The findings demonstrate that orthophosphoric acid catalysis is a promising pathway for integrating furfural extraction with cellulose-retentive pretreatment, thereby enhancing the sustainability, efficiency, and circularity of birch veneer chips’ biomass utilization. Full article

This study investigates the sequential integration of hydrothermal liquefaction (HTL) and anaerobic digestion (AD) as a strategy for resource recovery from municipal wastewater (MW) and semiconductor packaging wastewater (SPW) sludges. The primary objective is to determine the influence of HTL pretreatment on conversion efficiencies, water quality metrics, and subsequent anaerobic biodegradability. Specifically, the research focuses on biogas generation, COD removal, and the potential to promote circular resource utilization. HTL was conducted under controlled temperature (150–374 °C) and pressure (10–25 MPa) conditions, followed by batch AD at 41 °C using hydrogen- and methane-producing inocula at various ratios, specifically 20%, 50%, and 80%. Key variables, including total solids (TS), suspended solids (SS), chemical oxygen demand (COD), pH, and electrical conductivity (EC), were monitored to assess degradation efficiency and resource recovery. Additionally, chemical modifications in HTL-processed sludge were characterized using Fourier Transform Infrared Spectroscopy (FTIR). Results indicate that MW sludge achieved significant reductions in TS (65.3%) and enhanced biogas production of 156.7 mL/g VS at 80% inoculum. These figures reflect high biodegradability and compatibility with AD. In contrast, SPW sludge demonstrated limited COD removal (26.6–85%) and lower biogas yields of 154.0 mL/g VS. These results are likely due to elevated salinity and compositional complexity. These findings suggest that while HTL pretreatment significantly improves MW sludge utilization, SPW sludge may require additional or alternative treatment strategies. Overall, this study clarifies key factors influencing the performance of integrated HTL-AD systems across distinct sludge types and lays a foundation for the further development of sustainable sludge management processes. Full article

Tetracycline is a low-cost broad-spectrum antibiotic and widely used in medicine and aquaculture. Its residues are usually released into the environment through wastewater, which may lead to the spread of antibiotic resistance genes and pose ecological risks. To address this environmental issue, a hierarchical lignin-derived porous carbon (LPHC) was synthesized using renewable biomass lignin as the precursor through a combined phosphoric acid-activated hydrothermal pretreatment. The resulting LPHC was used to effectively remove tetracycline from aqueous solutions. Characterization results indicated that LPHC had a high specific surface area (1157.25 m²·g⁻¹), a well-developed micro-mesoporous structure, and abundant surface oxygen-containing functional groups, which enhanced its interaction with target pollutants. Adsorption experiments showed that LPHC exhibited excellent adsorption performance for tetracycline, with a maximum adsorption capacity of 219.81 mg·g⁻¹. The adsorption process conformed to the Langmuir isotherm model, indicating that monolayer chemical adsorption was dominant. Mechanism analysis further confirmed that the adsorption process was controlled by multiple synergistic interactions, including pore filling, π-π electron donor–acceptor interactions, hydrogen bonding, and electrostatic attraction. This work proposes a feasible strategy to convert waste biomass into high-performance and environmentally friendly adsorbents, which provides technical feasibility for sustainable water purification technologies. Full article

Hydrometallurgical pretreatment of pyrite-bearing concentrates and tailings by hydrothermal interaction with Cu(II) solutions is a promising route for chemical beneficiation and mitigation of acid mine drainage but is limited by passivation caused by elemental sulfur and secondary copper sulfides. Here, the effect of sodium lignosulfonate (SLS) on the hydrothermal reaction between natural pyrite and CuSO₄ in H₂SO₄ media at 180–220 °C was studied at [H₂SO₄]₀ = 10–30 g/dm³, [Cu]₀ = 6–24 g/dm³, and [SLS]₀ = 0–1.0 g/dm³. Process efficiency was evaluated by Fe extraction into solution and Cu precipitation on the solid phase, and products were characterized by XRD and SEM/EDS. SLS markedly intensified pyrite conversion: at 200 °C and 120 min, Fe extraction increased from 14 to 26% and Cu precipitation from 5 to 23%, while at 220 °C, Fe extraction reached 33.4% and Cu precipitation 26.8%. XRD confirmed the sequential transformation CuS → Cu_1.8S. SEM/EDS showed that SLS converts localized nucleation of Cu_xS on defect sites into the formation of a fine, loosely packed, and well-dispersed copper sulfide phase. The results demonstrate that lignosulfonate surfactants efficiently suppress passivation and enhance mass transfer, providing a basis for intensifying hydrothermal pretreatment of pyrite-bearing industrial materials. Full article

This study evaluates the environmental outcomes of integrating anaerobic digestion (AD) with pyrolysis (Py) and hydrothermal carbonization (HTC) to treat cattle slurry and grass silage in an Irish agricultural context. A consequential life cycle assessment (CLCA) was carried out for six scenarios based on 1 t of feedstock (0.4:0.6 cattle slurry/grass silage on a VS basis): two standalone AD systems (producing bioelectricity and biomethane) and four integrated AD–Py/HTC systems with different product utilisation pathways. Across all impact categories, the integrated systems performed better than standalone AD. This improvement is mainly due to the surplus bioenergy (electricity, biomethane, hydrocarbon fuel, hydrochar) that replaces marginal fossil energy (hard coal, natural gas and heavy fuel oil), together with the displacement of mineral NPK fertilisers by digestate-derived biochar and HTC process water. Among the configurations, the AD–HTC bioelectricity scenario (S4) achieved the best overall performance, driven by higher hydrochar yields, a favourable heating value, and a lower pretreatment energy demand compared with Py-based options. Across the integrated scenarios, climate change, freshwater eutrophication, and fossil depletion impacts were reduced by up to 84%, 86%, and 99%, respectively, relative to the fossil-based reference system, while avoiding digestate and fertiliser application reduced terrestrial acidification by up to 74%. Overall, the results show that the cascading utilisation of digestate via AD–Py/HTC can simultaneously enhance bioenergy production and nutrient recycling, providing a robust pathway for low-emission management of agricultural residues. These findings are directly relevant to Ireland’s renewable energy and circular economy targets and are transferable to other livestock-intensive regions seeking to valorise slurry and grass-based residues as low-carbon energy and biofertiliser resources. Full article

To investigate the treatment performance of a CuTiO₃ photocatalytic system for organic peroxide production wastewater under visible light, CuTiO₃ powder prepared through the hydrothermal method was used for this experiment. The light absorption properties of the CuTiO₃ catalyst were analyzed using Uv-Vis diffuse reflectance spectroscopy (Uv-Vis DRS). The effects of the initial pH, photocatalyst dosage, light intensity, and reaction duration on the photocatalytic reaction were examined. Before and after the reaction, the changes in pollutant components in water were characterized via three-dimensional excitation–emission matrix fluorescence spectrometry (3D-EEM) and gas chromatography–mass spectrometry (GC-MS); the changes in the concentrations of some pollutants were analyzed via wavelength scanning. The results indicated that CuTiO₃ has a good response to visible light. Under the optimized conditions (initial pH = 5, CuTiO₃ dosage = 1.2 g/L, light intensity = 1300 W/m², duration = 4 h), the COD removal rate reached 58%, and the B/C (BOD₅/COD) ratio of wastewater increased from 0.112 to 0.221, demonstrating a good pretreatment effect. GC-MS analysis demonstrated significant degradation effects on amide and hydride substances. Radical capture experiments verified hydroxyl radicals as the dominant species in CuTiO₃ photocatalysis. Visible-light photocatalysis using CuTiO₃ provides an efficient pretreatment pathway for organic peroxide production wastewater. Full article

Thermally compressed fast-growing wood exhibits superior mechanical properties, presenting a sustainable and cost-effective alternative to solid wood. However, to prevent structural damage and achieve higher densification during this process, effective pretreatment is essential. This study systematically evaluates the efficacy of hydrothermal and alkaline sulfite pretreatments in modifying Chinese fir (Cunninghamia lanceolata Hook.) and poplar (Populus tomentosa Carr.). The resulting compressed wood was comprehensively characterized in terms of mass loss, mechanical strength, microstructure, chemical composition, and cellulose crystallinity. Results indicate that, under the conditions tested, alkaline sulfite pretreatment was more effective than hydrothermal pretreatment in enhancing the material properties of densified wood, with peak density, compressive strength, and hardness achieved after 5 h for fir and 3 h for poplar, respectively. The results obtained under the present experimental conditions support the fact that alkaline sulfite pretreatment is an effective approach for producing densified wood with enhanced mechanical properties, suggesting its potential suitability for higher-value applications. Full article

Wet coffee pulp residues (WCPRs) are typically underutilized, and their accumulation increases alongside coffee production, generating significant environmental impacts. This study proposes a sustainable valorization approach through hydrothermal treatment followed by membrane filtration for the production of xylooligosaccharides (XOSs). Extractive-free WCPR contained 35.4% structural carbohydrates (20.4% cellulose and 15.0% hemicellulose) and 27.0% lignin. Hydrothermal treatments (180 °C, 3 °C min⁻¹, 15–60 min) were performed with and without citric acid as an organic catalyst. The acid-assisted treatment (T4) enhanced hemicellulose depolymerization and xylose release (16 g·kg⁻¹ dry biomass), whereas milder, non-acidic conditions (T3) promoted the selective formation and recovery of short-chain XOS, reaching cumulative biomass-normalized yields of up to 14 g·kg⁻¹ of xylobiose (X2) and 9 g·kg⁻¹ of xylotriose (X3). Subsequent membrane processing (UF–DF–NF) enabled progressive purification and enrichment of XOS fractions. Diafiltration was identified as the main step governing XOS enrichment, whereas nanofiltration primarily refined separation by directing monomeric sugars to the permeate rather than substantially increasing XOS yields. Additionally, Multiple Factor Analysis (MFA) integrated process and compositional variables, explaining 79.6% of the total variance. Dimension 1 represented process intensity and xylose transport, while Dimension 2 reflected molecular-weight-driven XOS fractionation. The acid-assisted process (T4) exhibited a distinct multivariate signature, characterized by enhanced carbohydrate mobilization and improved XOS recovery with reduced dependence on dilution. Overall, coupling hydrothermal pretreatment with membrane fractionation proved to be an efficient, and environmentally friendly strategy for coffee by-product valorization, consistent with hemicellulose-first biorefinery models and the principles of the circular bioeconomy. Full article

Degradable polymers are essential in tissue engineering due to their capacity to mimic the extracellular matrix and promote regeneration. To be functional, they require interconnected porous structures that allow for nutrient exchange and cell migration. Although methods exist to optimize porosity, many compromise biocompatibility because pore-forming substances are used. In this context, hydrothermal pretreatment emerges as a promising technique to simultaneously improve both the porosity and mechanical properties of polymers without using potentially toxic reagents. This study proposes a novel route that combines hydrothermal pretreatment with supercritical CO₂ foaming, evaluating whether the structures obtained present better characteristics for biomedical applications compared to those obtained using supercritical CO₂ foaming alone. A screening of this novel route has been tested on individual polymers (PCL, PLA, PLGA, PVA, PBS, chitosan) and various binary combinations (PCL-PBS, chitosan-PBS, PVA-PBS, PLGA-PEDOT: PSS). The resulting materials were characterized using electron microscopy to analyze pore diameter and distribution, as well as structural stability and homogeneity. For the individual polymers, the hydrothermal pretreatment clearly improved the results obtained. However, most polymer combinations showed drawbacks such as mass losses, heterogeneity, or unsatisfactory pore formation. This research highlights the potential of hydrothermal pretreatment to optimize scaffolds, which is crucial for viability in biomedical applications. Full article

This study investigates the use of fungal strains as an eco-friendly and cost-effective approach to enhance the protein content of sugarbeet pulp (SBP) via semi-solid fermentation (SmF). The effects of ultrasonication (US) and hydrothermal (HT) pretreatments, combined with SmF, were evaluated with respect to the nutritional and technological characteristics of the resulting SBP fungal biomass. Fermentation using filamentous fungi, such as Aspergillus nidulans CCF2912, Botrytis cinerea CCF2361, and Rhizopus arrhizus CCF1502, increased the protein content of SBP fungal biomass from 53.7 to 93.82–134.11 mg/g d.w. and improved the essential amino acid (EAA) ratio from 0.81 to 1.96. Nucleic acid (NA) content in the end product was decreased by 20.3–31.5% following additional sterilisation at 90 °C for 30 min, while mono- and polyunsaturated fatty acids increased from 2.36 to 4.93% and from 5.11 to 10.16% of total fatty acids, respectively. Tryptic digestion of SBP fungal biomass proteins allowed in silico prediction of peptides (up to 2 kDa) with potential DPPH, hydroxyl, and ABTS^•+ radical scavenging activities. Among the tested fungi, R. arrhizus CCF1502 grown on US-treated SBP substrate showed the highest protein biomass yield and overall nutritional quality. These findings demonstrate that integrating thermal pretreatment with SmF provides a sustainable and efficient strategy to enhance the protein yield and nutritional value of SBP, supporting its potential application as a functional ingredient in food and feed applications. Full article