Search Results (21)

Background: Surgical care in conflict regions like Tigray, Ethiopia, faces severe challenges due to limited resources, infrastructural deficiencies, and high trauma burden. From 2019 to 2023, a multidisciplinary team conducted five humanitarian missions focusing on orthoplastic reconstruction of extremity and mandibular injuries from high-energy gunshot trauma. Methods: A retrospective analysis was performed on 98 patients who underwent free or pedicled flap reconstruction. Data included demographics, flap type, technique, complications, follow-up, and early clinical outcomes score as well as mobility scores. Flaps were harvested using loupes anastomosis performed using microscopes, depending on availability. Results: Among 98 patients (25.5% female, 74.5% male), 69 free flaps and 38 pedicled flaps were performed. Free fibula flaps (n = 54) included 33 mandibular and 21 extremity reconstructions. Additional flaps included ALT, gracilis, and LD flaps. Pedicled flaps included 18 fibula and 20 ALT/LD flaps. Mean age was 35.5 years; mean operative time was 429.5 min, with mandibular fibula transfers being longest. Microsurgical techniques were used in 34% of cases. Median follow-up was 10 months. Microsurgical complications occurred in 18.4%, mainly in fibula transfers (25.9%). Non-microsurgical issues included wound infections (n = 15), graft loss (n = 3), and bleeding (n = 5). Flap loss occurred in 16.3% overall. Early clinical outcome results were good (30.6%), acceptable (28.6%), and moderate (24.5%). Conclusions: Orthoplastic reconstruction using both free and pedicled flaps is feasible in low-resource, conflict settings. Despite infrastructural challenges, functional outcomes were achievable, supporting the value of adaptable microsurgical strategies in humanitarian surgery. Full article

Metallic biomaterials are prevalent in medical applications. In the treatment of mandibular fractures, the use of metallic biomaterials makes it possible to recover the ability to bite and partially recover speech through preventing ankylosis of the temporomandibular joints, the formation of pseudoarthritic joints, and the consolidation of reduced bones. This article presents the concept of a triaxial plate for osteosynthesis of basal fractures of the mandibular condyle, which are very common fractures in humans. Approximately half of patients with such fractures have wide (squat) condylar processes, which allows for the use of as many as three straight plates. However, installing three plates is quite troublesome, and the use of a single and transversely reinforced plate would facilitate treatment. This study proposes a plate with three reinforcements running along three divergent axes. The plate is fixed to the bone fragments with 11 screws. This concept for the treatment of basal fractures allows patients to quickly recover their primary system functions due to rigid fixation through the use of short (4 mm) screws, as there is no trauma to the medial pterygoid muscle and the mandible canal contents and no intermaxillary immobilization. Full article

Background: Intraoperative facial nerve monitoring (IFNM) is becoming increasingly prevalent as an established intraoperative aid in parotid gland surgery. To date, however, there are few scientific studies on the postoperative outcomes of submandibular gland surgery, particularly on the postoperative injury of the marginalis mandibulae branch (MMB) of the facial nerve (FN). This branch represents the most frequent and feared complication of this surgery, with an incidence of 1–7% of cases. Objective: This retrospective study aims to evaluate the incidence of postoperative MMB paralysis in patients undergoing submandibular sialoadenectomy for benign conditions from 2014 to 2023, focusing on the role of IFNM. Materials and Methods: The patients were divided into two groups: the subjects of Group 1 (G1) had undergone submandibular sialoadenectomy after identification and clamped facial vessels, without the aid of IFNM (from 1 January 2014 to 31 December 2018). Conversely, subjects in Group 2 (G2) underwent IFNM procedures (from 1 January 2019 to 31 December 2023). The classification of any FN malfunctions was conducted following the House–Brackmann grading system. A descriptive analysis was performed, and univariate and multivariate logistic regressions were used to examine the impact of IFNM on surgical timing and the association between G2 deficit (vs. G1) corrected for age, sex, and smoking status. Results: The study population comprised a total of 101 patients with a mean age of 55 ± 16 years. The sample population comprised 50 subjects assigned to Group 1 (49.5%, 24 females and 26 males) and 51 subjects assigned to Group 2 (50.5%, 21 males and 30 females). Postoperative paralysis of the MMB occurred in 23 subjects (22.77%), including 12 of G1 (4 had a grade II and 8 grade III dysfunction) and 11 of G2 (8 had a grade II and 3 grade III dysfunction). A six-month evaluation revealed that only five patients in G1, previously diagnosed with grade II dysfunction, exhibited a residual deficit. The mean surgical time for the entire patient cohort was 99 ± 44 min: 110 ± 43 min for Group 1 and 92 ± 42 min for Group 2 (Beta = −19; 95% CI −37 at −0.16; p-value = 0.048). Furthermore, a longer operative time was observed in smokers than in non-smokers (p-value = 0.008), suggesting that smoking affects the length of surgery (Beta = 0.32; 95% CI −0.08 to −0.55). Discussion and Conclusions: MMB paralysis is one of the most prevalent complications that may arise in submandibular gland surgery. IFNM provides surgeons with a valuable tool for identifying MMB in submandibular sialoadenectomy. The efficacy of IFNM as an aid is contingent upon the expertise of the operating surgeon. Full article

Objectives: The aim of this experimental study was to evaluate the accuracy of five intraoral scanners for digitizing fully dentate unprepared maxillae and mandibulae in vitro. Materials and Methods: One maxillary and one mandibular reference model with acrylic teeth, an industrial grade reference scanner, 3D evaluation software and the intraoral scanners CS 3500, iTero HD2.9, Planmeca PlanScan, TRIOS Standard and 3M True Definition were used. Scans of the entire arches, one front and two side segments of each arch scan of maxilla and mandibula were evaluated separately for trueness and precision. In addition, visual analyses of deviation patterns, surface properties and approximal areas were performed with the aid of 3D evaluation software. Results: The intraoral scanners CS 3500, TRIOS Standard and iTero HD2.9 showed a similar level of trueness. The True Definition scanner showed lower full arch trueness compared to the TRIOS Standard and to the iTero HD2.9 (p < 0.05). Full arch trueness of the PlanScan was lower compared to the other scanners. Video-based systems showed higher numbers of datapoints per scan (127,300–169,730) compared to single image-based systems (64,115–88,124). The acquisition of interproximal areas was insufficient across all scanners. Limitations: The intraoral scanners were not tested under clinical conditions in this study. Conclusions: Apart from interproximal areas, clinically acceptable full arch trueness was achieved by the CS 3500, the iTero HD2.9 and the TRIOS Standard. Full article

Dental diagnostic imaging has progressed towards the use of advanced technologies such as 3D image processing. Since multidetector computed tomography (CT) is widely available in equine clinics, CT-based anatomical 3D models, segmentations, and measurements have become clinically applicable. This study aimed to use a 3D segmentation of CT images and volumetric measurements to investigate differences in the surface area and volume of equine incisors. The 3D Slicer was used to segment single incisors of 50 horses’ heads and to extract volumetric features. Axial vertical symmetry, but not horizontal, of the incisors was evidenced. The surface area and volume differed significantly between temporary and permanent incisors, allowing for easy eruption-related clustering of the CT-based 3D images with an accuracy of >0.75. The volumetric features differed partially between center, intermediate, and corner incisors, allowing for moderate location-related clustering with an accuracy of >0.69. The volumetric features of mandibular incisors’ equine odontoclastic tooth resorption and hypercementosis (EOTRH) degrees were more than those for maxillary incisors; thus, the accuracy of EOTRH degree-related clustering was >0.72 for the mandibula and >0.33 for the maxilla. The CT-based 3D images of equine incisors can be successfully segmented using the routinely achieved multidetector CT data sets and the proposed data-processing approaches. Full article

Helium ion beam therapy, one of the particle therapies developed and studied in the 1950s for cancer treatment, resulted in clinical trials starting at Lawrence Berkeley National Laboratory in 1975. While proton and carbon ion therapies have been implemented in research institutions and hospitals globally after the end of the trials, progress in comprehending the physical, biological, and clinical findings of helium ion beam therapy has been limited, particularly due to its limited accessibility. Ongoing efforts aim to establish programs that evaluate the use of helium ion beams for clinical and research purposes, especially in the treatment of sensitive clinical cases. Additionally, helium ions have superior physical properties to proton beams, such as lower lateral scattering and larger LET. Moreover, they exhibit similar physical characteristics to carbon, oxygen, and neon ions, which are all used in heavy ion therapy. However, they demonstrate a sharper lateral penumbra with a lower radiobiological absence of certainties and lack the degradation of variations in dose distributions caused by excessive fragmenting of heavier-ion beams, especially at greater depths of penetration. In this context, the status and the prospective advancements of helium ion therapy are examined by investigating ionization, recoil, and lateral scattering values using MC TRIM algorithms in mandible plate phantoms designed from both tissue and previously studied biomaterials, providing an overview for dental cancer treatment. An average difference of 1.9% in the Bragg peak positions and 0.211 mm in lateral scattering was observed in both phantoms. Therefore, it is suggested that the ⁴He ion beam can be used in the treatment of mandibular tumors, and experimental research is recommended using the proposed biomaterial mandible plate phantom. Full article

Sports activities may induce long-lasting changes in mandibular trajectories. The aim was to compare condylar and mandibular movements in athletes with orofacial injuries with values measured in non-injured athletes. The group of 132 athletes without mandibular injury included asymptomatic athletes with a history of a blow to the right side (N = 43) and the group included asymptomatic athletes with a history of a blow to the left side (N = 41) of the mandible. The injured athletes suffered from stiffness/pain and/or limitation of jaw movements. The symptoms disappeared shortly after the injury. Athletes with a history of injury have smaller mean values of Bennett angle on the side of impact, and Bennett angle on the opposite side is greater than the mean found in non-injured athletes. Significantly smaller Bennett angle values in athletes with a history of a blow to one side of the mandible are due to the adaptability of the orofacial system. The larger Bennett angle on the opposite side of the injury is also due to the adaptive mechanism of the TMJ. Clinical Relevance: An individualized approach to TMJ values is mandatory in restorative procedures in every patient, especially in patients with a history of trauma to the orofacial system. Full article

This study aimed to analyze the influence of multiple uses of zirconia implant drills on their cutting performance and bending strength. The hypothesis was that drill usage and sterilization cycles would not affect drilling time or flexural strength. Sixty zirconia twist drills from Z-Systems were used to drill in the angulus mandibulae region of fresh porcine jaws. The drills were divided into four groups based on the cycle count, and the drilling time was measured. Bending strength tests were conducted using a universal testing machine, and statistical analysis was performed using ANOVA tests. The results showed that drilling times followed a normal distribution, and significant differences were observed in drilling times between group 1 and the other groups for the pilot drill. However, no significant differences were found for ø3.75 mm and ø4.25 mm drills, and drilling times also varied significantly among different drill diameters, regardless of the cycle count. Flexural strength did not significantly differ among drill diameters or sterilization cycles. Overall, using and sterilizing zirconia implant drills had no significant impact on drilling time or flexural strength. Nevertheless, drilling times did vary depending on the diameter of the drill. These findings provide valuable insights into the performance and durability of zirconia implant drills, contributing to the optimization of dental implant procedures. Full article

Submandibular gland sialolithiasis can be addressed by gland removal or by stone removal. Intraoral stone removal has now become the go-to technique to minimize aesthetic and functional sequelae (e.g., marginalis mandibulae injury, visible surgery scar) and, although traditional techniques were first experimented with (intraoral ducotomy), newer techniques drew the interest of the scientific community: sialoendoscopy, TORS-S (TransOral Robotic Surgery Assisted–Sialolithotomy) and VITOM-guided sialolithotomy. In this article, we compare the two newest transoral techniques for transoral sialolithotomy, TORS-S and 3D-4K VITOM-guided sialolithotomy, used to treat bilateral hilar submandibular gland sialolithiasis in the same patient, one technique for each side. Using these techniques, a faster recovery is achievable with almost no anatomical and/or functional sequelae, since they both allow better visualization and manipulation of soft tissues and noble structures (e.g., lingual nerve and Wharton’s duct) and make surgery easier and safer. Moreover, OR staff can better perceive surgical steps and be involved in the procedure, thus showing the high educational and training potential of these technologies. Full article

(i) Objective: Changes in the mesiodistal axial angulations of teeth with orthodontic treatment have been a topic of interest in orthodontics for many years, although it has not been clarified enough yet. Therefore, this present study aimed to compare mesiodistal axial angulations of canine and first molar teeth by measuring from pre- and post-treatment panoramic radiographs in different types of orthodontic malocclusions. (ii) Materials and Methods: In the study, the mesiodistal axial angulation angles of the lower–upper canines (teeth numbered 13, 23, 33, and 43) and first molars (teeth numbered 16, 26, 36, and 46) were compared on panoramic radiographs taken pre- (T0) and post- (T1) orthodontic treatment of 353 patients: 237 female (mean age 14.74 ± 2.96) and 116 male (mean age 14.44 ± 2.50), who had not received any prior orthodontic treatment. The groups were formed according to pre-/post-treatment, gender, angle classification, skeletal classification, bilaterally first premolar extraction/non-extraction, and the use/non-use of miniscrews in the extraction cases. The mesiodistal angulations between the long axes of both the lower and upper canines and first molars and the interorbital plane were measured separately and recorded. The reliability analysis between the repeated measurements was evaluated using the intraclass correlation coefficient (ICC). For statistical analysis, a paired sample t-test and Wilcoxon test were used for the normally and non-normally distributed data, respectively. For the between-groups comparison, independent sample t-test and one-way ANOVA were used for normally distributed data, while the Mann–Whitney U and Kruskal–Wallis tests were used for non-normally distributed data. A value of p < 0.05 was considered statistically significant. (iii) Results: ICCs showed excellent reliability, ranging from 0.804 to 0.913 in other teeth, yet were good in tooth 43 (ICC = 0.712). Regardless of the groups, statistically significant differences were found between the T0 and T1 angulations for all teeth, except teeth 13 and 16. In all groups, the increase in the angulations of teeth 33 and 43 and the decrease in the angulations of teeth 36 and 46 (except skeletal class 3) were found to be statistically significant. The T0 and T1 angulation changes in the miniscrews in the used and non-used groups in extraction cases were similar to the differences found in all teeth, regardless of the groups. There was no significant difference between gender, skeletal classes, and angle classes in the amounts of change in the mesiodistal angulations. (iv) Conclusion: It was concluded that orthodontic treatment caused significant changes in the mesiodistal axial angulation of the canine and the first molar teeth. Furthermore, the fact that the angulations tended to increase in the lower canine teeth and decrease in the lower first molar teeth revealed the importance of tooth movement control, especially in orthodontic mechanics in the mandibula. Full article

Particularly severe cases with tunneled defects are rarely reported and are described only in a few case reports. This case report describes the treatment of a tunnel fenestration in the lower central jaw after unsuccessful endodontic treatment following trauma of incisors 31 and 41 over the course of six years, which led to the development of an internal granuloma and a radicular cyst in the lower jaw. The patient presented with a 2.67 cm³ radicular cyst displacing the surrounding tissue at regio 31 and 41, which resulted in a tunnel-like bony defect. Endodontic treatment and periapical root tip resection on teeth 31 and 41 with cystectomy, and with a 12 month follow-up, were successful in the healing of the bone defect. The preserved teeth received lithium disilicate crowns for definite restoration one year postoperatively. This treatment can be an option for the therapy of large cysts. Full article

The Antarctic endemic fish genus Trematomus (Trematominae, Notothenioidei) includes 15 species very diverse in morphology, lifestyle and feeding ecology. Co-occurring on the continental shelf, they occupy different habitats and a wide range of ecological niches as the result of adaptive radiation during their evolutionary history. Ecomorphological differentiation is a key feature of adaptive radiations, with a general trend for specialization following divergence. Here, we investigated the trophic adaptive morphology and ecology of six Trematomus species from Terra Nova Bay (Ross Sea) through feeding apparatus metrics and geometric morphometrics. The suction index (SI), the mechanical advantage in jaw closing (MA), the relative surface of the adductor mandibulae muscle and nine morphological traits related to feeding structures were analysed. Head shape clearly differentiates the benthic (T. bernacchii, T. hansoni and T. pennellii) from the pelagic (T. eulepidotus and T. borchgrevinki) species. The position of the eyes and the orientation of the mouth also contribute to specific morphological differences and specialization. Interestingly, T. newnesi stands at an intermediate position and the mouth is clearly oriented upwards compared to the other congeneric species. Full article

This study aimed to find out the incidence of impacted third molars and associated pathologies in people who live in the North Cyprus population. Dr. Burhan Nalbantoglu State Hospital is the only hospital that has an oral and maxillofacial surgery department among the state hospitals in North Cyprus. Patients who were referred to this department during a one-year period due to the complaints regarding their third molar were included in our study. This retrospective study involved 550 patients aged 16 to 65 years (1752 third molars). Chi-square tests were done for bilateral comparison between age, gender, and third molar (p < 0.05). Among the groups included in the study, the highest number of third molars originated from the 20–29 age group (n = 1050). Among all 1752 third molars, 716 (40%) of them erupted, while 1036 (60%) were impacted molar teeth, with significant differences between genders (p > 0.05). The most often impacted position in the mandible was the mesioangular type (42%) and in the maxilla was the vertical type (62%). Partially and completely impacted mandibular third molars showed a significant difference between the left and right sides (p < 0.05). A huge proportion of third molars are impacted in the North Cyprus population. The degree of impaction of wisdom teeth and the problems they cause should be well evaluated, and the surgical approach should be considered according to the baseline of this data. Full article

Bruxism is a repetitive activity of the masticatory muscles, which determine teeth grinding or clenching, associated with rigidity, bracing, or thrusting of the mandibula. The aim of this study was to determine the prevalence of possible bruxism in 328 students attending the Faculty of Dental Medicine, University of Medicine and Pharmacy of Craiova, and its associations with stress and other manifestations of the temporo-mandibular disorder. This was a questionnaire-based study to collect information on self-evaluation of bruxism presence, frequency of specific episodes, stress, anxiety, and other manifestations of temporo-mandibular disorder. Self-evaluated bruxism was identified in 39.33% from the entire study group, allowing us to define two subgroups for further analysis. Sleep bruxism was present in 16.28% of participants; awake bruxism was present in 68.99%, while 14.73% of participants presented a combined form. The main manifestation of bruxism was reported as teeth grinding. Fatigue was identified as a common clinical sign of bruxism and temporo-mandibular disorder. Group distribution analysis (Chi-Square) indicated significant associations between bruxism and stress, panic, restlessness, or increased stress during the COVID-19 pandemic (p < 0.05). Bruxism, and especially awake bruxism, has increased in prevalence among young students, and it has been associated with increased levels of stress. Full article

Fragmentation is a recurring feature of archaeological faunal material, and impacts many aspects of zooarchaeological studies from taxonomical identification to biometric studies. It can result from anthropic and natural actions that occurred respectively before and/or after bone deposit. While several bone fragmentation typologies have been described, they are currently based on both macroscopic observations and researcher subjectivity and lack the universality necessary for inter-study comparisons. To fulfill this need we present a standardized landmark-based protocol for the description and quantification of mandibular fragmentation patterns, using two insular rodents of different sizes as models. The rice rats (Oryzomyini tribe) and the agouti (Dasyprocta) from the Lesser Antilles were abundant during the pre-Columbian Ceramic Age (500 BCE-1500 CE). Their mandibles’ shapes were quantified using the coordinates of 13 2D-landmarks. We show that landmark-based measurements can be used to:—assess the preservation differences between taxa of the same taxonomic group (e.g., rodents),—estimate the level of preservation of a skeletal part (e.g., mandible),—describe fragmentation patterns without pre-existing typologies and—facilitate the application of geometric morphometric methods to fragmented archaeological material. Our novel approach, leveraging fragmentation analyses and establishing specific fragmentation patterns, frees itself from existing typologies and could be systematically applied to future research. Full article