Search Results (267)

Mercury (Hg) contamination in water and soil poses severe ecological and human health risks, yet conventional sorbents often suffer from limited capacity, selectivity, and stability. Here, we report a bifunctional porous organic polymer (AMTD-TCT) rationally constructed by covalently crosslinking 2-amino-5-mercapto-1,3,4-thiadiazole with trichlorotriazine, thereby integrating abundant sulfur and nitrogen coordination sites within a stable mesoporous framework. AMTD-TCT exhibits an ultrahigh Hg(II) adsorption capacity of 1257.7 mg g⁻¹, far exceeding most reported porous sorbents. Adsorption follows monolayer chemisorption, governed by strong S–Hg and N–Hg coordination and Na⁺/Hg²⁺ ion exchange, while hierarchical porosity ensures rapid diffusion and efficient utilization of active sites. The polymer maintains robust performance over a wide pH range and demonstrates strong retention with minimal desorption, underscoring its environmental durability. These findings highlight AMTD-TCT as a highly effective and scalable platform for Hg(II) remediation in complex aqueous–soil systems and illustrate a generalizable molecular design strategy for developing multifunctional porous polymers in advanced separation and purification technologies. Full article

Low-permeability glutenite reservoirs in the Qaidam Basin, NW China, exhibit intricate pore networks and strong heterogeneity that hinder effective hydrocarbon development. Here, we integrate thin-section petrography, scanning electron microscopy (SEM), mercury injection capillary pressure (MICP), and nuclear magnetic resonance (NMR) to characterize pore types and establish quantitative links between fractal dimension and petrophysical properties. The reservoirs are mainly pebbly sandstones and sandy conglomerates with 15–23% quartz, 27–37% feldspar, and 2–20% carbonate/muddy matrix. Helium porosity ranges from 5.12% to 18.11% (mean 9.39%) and air permeability from 60 to 3270 mD (mean 880 mD). Fine pores (1–10 μm) dominate, throats are short and poorly connected, and illite (up to 16.76%) lines pore walls, further reducing permeability. Fractal analysis yields weighted-average dimensions of 2.55, 2.50, and 2.15 for macro-, meso-, and micropores, respectively, giving an overall dimension of 2.52. Higher dimensions correlate negatively with porosity and permeability. Empirical models (quadratic for porosity and exponential for permeability) predict core data within 0.86% and 5.4% error, validated by six blind wells. Reservoirs are classified as Class I (>12%, >1.0 mD), Class II (8–12%, 0.5–1.0 mD), and Class III (<8%, <0.5 mD), providing a robust tool for stimulation design and numerical simulation. Full article

In the present investigation, a novel dispersive liquid–liquid microextraction (DLLME) method was developed for the spectrophotometric determination of Hg²⁺. Fe(II) phthalocyanine (Fe(II)Pc) was employed as the sensor, chloroform (300 µL) as the extraction solvent, and ethanol (700 µL) as the dispersive solvent. Following the formation of the Hg²⁺:Fe(II)Pc complex, the sample was centrifuged at 1000 rpm for 2 min. The aqueous phase was discarded, and the extraction phase was diluted to 250 µL with methanol and transferred into a 250 µL quartz cell for spectrophotometric measurement at 276 nm. The method exhibited a linear range of 1–20 µg/L, with limits of detection (LOD) and quantification (LOQ) calculated as 1.44 µg/L and 4.80 µg/L, respectively. The enrichment factor was determined to be 105, and the optimum pH for the procedure was 2.0. Full article

Mercury exposure has been linked to male infertility. Given that mercury chloride (HgCl₂) may promote an oxido-inflammatory milieu associated with pathophysiological derangements, it is hypothesised that Thymoquinone (TQ), an antioxidant and anti-inflammatory agent, may mitigate the gradual harmful effects of mercury exposure on rat testes, epididymis, and hypothalamus, as these organs are vital to reproductive function. To test this hypothesis, 40 rats (strain: Wistar; sex: male) were randomly assigned to five cohorts of eight rats each. After a 7-day acclimation, treatments were dispensed for 28 consecutive days accordingly: Cohort I: distilled water only, as control; Cohort II: HgCl₂ only (20 µg/mL); Cohort III: TQ only (2.5 mg/kg); Cohort IV: HgCl₂ + TQ (20 µg/mL + 2.5 mg/kg); and Cohort V: HgCl₂ + TQ (20 µg/mL + 5 mg/kg). Co-treatment with TQ preserved the body and organ weight of the HgCl₂ exposed animals. However, TQ did not reduce HgCl₂-induced dysfunction in sperm function and morphology. The serum follicle-stimulating hormone (FSH), luteinising hormone (LH), and testosterone were increased significantly (p < 0.05) by TQ co-treatment, while decreasing the prolactin level. TQ administration also increased (p < 0.05) testicular enzymes, including alkaline phosphatase (ALP), lactate dehydrogenase (LDH), acid phosphatase (ACP), and glucose-6-phosphate dehydrogenase (G6PD) activities, which HgCl₂ decreased. TQ administration increased (p < 0.05) HgCl₂-induced decreases in catalase (CAT), superoxide dismutase (SOD), glutathione peroxidase (GPx), glutathione (GSH), glutathione-s-transferase (GST), and total sulfhydryl group (TSH) levels in the testes, epididymis, and hypothalamus of experimental rats. Further, TQ reduced HgCl₂-mediated increases in RONS-reactive oxygen and nitrogen species; LPO–lipid peroxidation; PC–protein carbonyl formation; and XO–xanthine oxidase activity. Furthermore, levels of inflammatory biomarkers, including tumour necrosis factor alpha (TNF-α), nitric oxide (NO), interleukin-1 beta (IL-1β), and myeloperoxidase (MPO), were decreased (p < 0.05) in the co-treated groups, with a higher dose of TQ (5.0 mg/kg) showing a more pronounced protective effect. Additionally, TQ co-administration increased Bax and decreased Bcl-2 and p53 protein levels (p < 0.05), thereby protecting the rats’ testes, epididymis, and hypothalamus from HgCl₂-induced apoptosis. Molecular docking simulation analysis revealed TQ interaction dynamics with PPAR-α and PPAR-δ to suppress NF-kB-mediated pro-inflammatory sequela as well as activate Nrf-2-mediated antioxidant defence system. These predicted biological effects of TQ resonate with the findings from the in vivo studies. Therefore, supplementation with TQ may help reduce chemical-induced toxicities, including HgCl₂‘s reproductive toxicity. Full article

This paper reports a novel effort to estimate and evaluate the coefficients of Hg transfer across the water/air interface in lakes such as Cane Creek Lake (CCL, Cookeville, TN, USA). This was accomplished by calculating the coefficients (k_w) using the Two-Thin Film (TTF) Model for Hg transfer together with the field-measured data of Hg emission flux (F), dissolved gaseous mercury concentration (DGM), air Hg concentration (C_a), and water temperature for Henry’s coefficient (K_H) obtained from a separate field study at the CCL. The daily mean k_w values range from 0.045 to 0.21 m h⁻¹, with the min. at 0.0025–0.14 and the max. at 0.079–0.41 m h⁻¹, generally higher for the summer, and from 0.0092 to 0.15, with the min. at 0.0032–0.033 and the max. at 0.017–0.31 m h⁻¹, generally lower for the fall and winter, exhibiting an apparent seasonal trend. The highest k_w values occur in August (mean: 0.21, max.: 0.41 m h⁻¹). Our k_w results add to and enrich the aquatic interfacial Hg transfer coefficient database and provide an alternative avenue to evaluate and select the coefficients for the TTF Model’s application. The k_w results are of value in gaining insights into the Hg transfer actually occurring across the water/air interface under environmental influences (e.g., wind/wave, solar radiation). Our k_w results do not show a clear, consistent correlation of k_w with wind/wave effect, nor sunlight effect, in spite of some correlations in sporadic cases. Generally, the k_w values do not exbibit the trends prescribed by the model sensitivity study. The comparisons of our k_w results with those obtained using wind-based transfer models (the Liss/Merlivat Model, the Wanninkhof Model, and the modified linear model) show that they depart from each other. The findings of this study indicate that the TTF Model has limitations and weaknesses. One major assumption of the TTF Model is the equilibrium of the Hg distribution between the air and water films across the water/air interface. The predominant oversaturation of DGM shown by our DGM data evidently challenges this assumption. This study suggests that aquatic interfacial Hg transfer is considerably more complicated, involving a group of factors, more than just wind and wave. Full article

Duckweeds are commonly used as standard ecotoxicological test species and are excellent candidates for phytoremediation due to their adaptability to diverse aquatic conditions. This study investigated the response of two duckweed species, Lemna aequinoctialis and Spirodela polyrhiza, to mercury-contaminated environments, specifically focusing on their growth rates and photosynthetic performance under mercury stress. Duckweeds were treated with HgCl₂ at various concentrations (0, 0.1, 0.2, and 0.3 mg/L) in 10% Hoagland’s medium for seven days, after which growth parameters, pigment contents, and chlorophyll fluorescence levels were evaluated. The results showed that increasing mercury concentrations significantly affected growth and photosynthetic pigments in L. aequinoctialis and S. polyrhiza. Chlorophyll fluorescence analysis indicated that, under higher mercury concentrations, Fv/Fm and Y (II) decreased, while NPQ increased. The findings revealed that L. aequinoctialis was more susceptible to mercury toxicity than S. polyrhiza. Therefore, L. aequinoctialis may serve as a more sensitive species for mercury biomonitoring, whereas S. polyrhiza is more resistant and might, for this reason, be more useful for phytoremediation of mercury-contaminated soil. Full article

The giant moray eel (GME; Gymnothorax javanicus) is an important marine species that plays a key ecological role in reef systems and is a valued food source for indigenous communities. However, it is well-known that GMEs pose a food safety risk due to their ability to accumulate high levels of ciguatoxins (CTXs), the toxins known to cause ciguatera poisoning. This study assessed the age, CTX levels, elemental composition, and nutritional profile of seven GME specimens collected from Muri Lagoon, Rarotonga (Cook Islands), representing the most detailed compositional investigation on this species. Age was determined for the three largest specimens, with the oldest being 39 years old. All specimens contained ciguatoxins, with Type I (CTX4A derivatives), Type II (CTX3C derivatives), algal-ciguatoxins, and biotransformed metabolites being detected. There was a higher CTX content in the liver samples compared to flesh samples, with the longest–heaviest specimen containing the highest levels. The CTX1B level observed in flesh samples of all seven eel specimens exceeded the recommended safe guidance level proposed by the USFDA. A similar ciguatoxin profile was observed across flesh sections, with the belly flap or top loin containing the highest levels of CTXs in most specimens. No bioactive metabolites produced by co-occurring harmful microalgae, including regulated shellfish toxins, were detected. Elemental analysis determined the presence of 21 elements, including arsenic, low levels of mercury, and the volcanic elements rubidium and strontium. Nutritionally, the GMEs were shown to be a lean protein source; however, due to the ubiquitous bioaccumulation of CTXs, they pose a food safety risk to consumers. Full article

An advanced anodic stripping voltammetry (ASV)-based Micro Electro Mechanical System (MEMS) sensor for cadmium (Cd) detection is presented in this study, which is cost-effective and efficient for in situ water monitoring, providing a crucial early warning mechanism, streamlining environmental monitoring, and facilitating timely intervention to safeguard public health and environmental safety. The rationale behind this work is to address the critical need for an in situ monitoring system for cadmium (Cd) in freshwater sources, particularly those adjacent to agricultural fields. Cd(II) is a highly toxic heavy metal that poses a significant threat to agricultural ecosystems and human health due to its rapid bioaccumulation in plants and subsequent entry into the food chain. The developed analytic device is composed of a commercial mercury salt-modified graphite screen-printed electrode (SPE) with a custom-designed innovative polydimethylsiloxane (PDMS) flow detection cell. The flow cell was prototyped using 3D printing and replica moulding, with its design and performance validated through COMSOL Multiphysics simulations to optimize inflow conditions and ensure maximum analyte dispersion on the working electrode surface. Chemical detection was performed using square wave voltammetry, demonstrating a linear response for Cd(II) concentrations of 0 to 20 µg/L. The system exhibited robust analytical performance, enabling 25–30 daily analyses with consistent sensitivity within the Limit of Detection (LoD) set by the law of 3 µg/L. Full article

In contrast to mercury, an extremely toxic element, selenium is an essential micronutrient, which by complexing with mercury can mitigate its toxicity. In this regard, we quantified mercury and selenium concentrations in samples (n = 309) of fish tissues and analyzed the Se:Hg molar ratio and HBVSe as toxicological risk biomarkers. The data indicated that mercury levels in planktivorous fish (0.630 ± 0.202 mg kg⁻¹) and carnivorous fish (1.196 ± 0.513 mg kg⁻¹) were above the Brazilian limits considered safe for daily consumption. The highest selenium concentrations were observed in planktivores (0.272 ± 0.093 mg kg⁻¹) and the lowest in herbivores (0.099 ± 0.092 mg kg⁻¹). Molar ratios greater than one and positive HBVSe values were found in 42% of the fish samples (n = 131). As a result, we found that (i) the trophic level influences the risk of mercury exposure through the intake of fish in the diet; (ii) the approach presented in our study (model II) involves greater rigor concerning intake and exposure via fish consumption, since it considers the antagonistic Se:Hg ratio; and (iii) selenium can attenuate mercury toxicity, but safe thresholds vary depending on the species. Full article

The microfractured tight reservoirs in Yongjin Oilfield have low permeability and a complex pore structure. The development of microfractures in reservoirs is crucial for their impact on productivity. To understand the impact of pore structure and microfracture development on permeability and productivity, research on the fractal dimension and classification evaluation of microfractured tight reservoirs is proposed. Micropore and microfracture parameter characteristics are determined via CT scanning and mercury intrusion experiments. Based on the fractal theory and box counting dimension methods, the fractal dimension of pores and fractures in microfractured tight reservoirs are calculated, which can be used as an evaluation index. Then, a comprehensive quantitative evaluation method (REI) is conducted on the microfractured tight reservoir of Yongjin Oilfield to determine the classification boundary of evaluation indicators and reservoir classification results. The research results show that the microfractured tight reservoirs in Yongjin Oilfield can be classified into three types based on their development effect from good to poor. The comprehensive evaluation index (REI) of type I reservoirs is greater than 0.7, and the fractal dimension of pores and fractures is less than 2.4. The comprehensive evaluation index (REI) of type II reservoirs ranges from 0.4 to 0.7, and the fractal dimension of pores and fractures ranges from 2.4 to 2.6. The comprehensive evaluation index (REI) of type III reservoirs is less than 0.4, and the fractal dimension of pores and fractures is greater than 2.6. The classification results are consistent with the dynamic data, and this achievement can provide a scientific basis for rapid reservoir evaluation and development strategy formulation. Full article

Salinomycin is a polyether ionophorous antibiotic with promising antineoplastic properties. Published studies have revealed that the compound also exerts pronounced antidotal activity against cadmium (Cd) and lead (Pb) intoxications. It has been proven that salinomycin with Cd(II) forms a coordination compound of a composition [Cd(C₄₂H₆₉O₁₁)₂(H₂O)₂] and an octahedral molecular geometry, while the coordination compound of the antibiotic with Pb(II) has a square pyramidal structure and composition [Pb(C₄₂H₆₉O₁₁)(NO₃)]. To date, there is no published information about the ability of salinomycin to form complexes with the mercury ion (Hg(II)). Herein, we report, for the first time, a synthetic procedure for a complex compound of salinomycin with Hg(II). The coordination compound was characterized by a variety of methods, such as elemental analysis, attenuated total reflectance–Fourier transform infrared spectroscopy (ATR-FTIR), electrospray ionization–mass spectrometry (ESI-MS), powder X-ray diffraction, nuclear magnetic resonance spectroscopy (NMR), thermogravimetry with differential thermal analysis (TG-DTA), and thermogravimetry with mass spectrometry (TG-MS). The elemental analysis data revealed that the new compound is of the chemical composition [Hg(C₄₂H₆₉O₁₁)(H₂O)(OH)]. Based on the results from the spectral analyses, the most probable structure of the complex was proposed. Full article

Cement–based mortars are essential in both modern construction and heritage conservation, where balancing mechanical strength with material compatibility is crucial. Mortars containing ––binders with low hydraulic activity, such as CEM II/B–L, often exhibit increased porosity and diminished strength, limiting their suitability for structurally demanding applications. This study investigates the potential of multiwalled carbon nanotubes (MWCNTs) to enhance the mechanical and microstructural properties of mortars formulated with both CEM II/B–L and CEM I binders. The influence of CNT incorporation was systematically assessed through compressive and flexural strength tests, vacuum saturation tests, mercury intrusion porosimetry (MIP), scanning electron microscopy (SEM), and differential thermal analysis (DTA). The results demonstrate significant mechanical improvements attributable to nanoscale mechanisms including crack bridging, pore–filling, and stress redistribution. Microstructural characterization revealed a refined pore network, increased densification of the matrix, and morphological modifications of hydration products. These findings underscore the effectiveness of CNT reinforcement in cementitious matrices and highlight the critical role of binder composition in influencing these effects. This work advances the development of high–performance mortar systems, optimized for enhanced structural integrity and long–term durability. Full article

This study assessed heavy metal contamination and associated health risks in soils and crops in the vicinity of a mercury mine located in Tongren, Guizhou Province, China, focusing on mercury (Hg), cadmium (Cd), arsenic (As), lead (Pb), and chromium (Cr). The study used the Index of Geological Accumulation (Igeo) and Health Risk Assessment (HRA) to quantify the level of contamination and assess the potential risks. The results showed that Area I was the most severely contaminated, with 94.24% of the sample sites being heavily contaminated with mercury, followed by Area II and Area III with severe cadmium contamination. The health risk assessment showed that children were exposed to non-carcinogenic risks of mercury and cadmium that exceeded the safety thresholds, with mercury being the major non-carcinogenic factor, especially through oral intake. The study also assessed the contribution of each heavy metal to pollution, with mercury contributing the most to ecological and health risks, especially in Areas I and III. The study highlights the urgent need to strengthen pollution control strategies, focusing on mining activities and agricultural inputs, to reduce risks and protect public health. Full article

The removal of mercury(II) from aquatic environments using polyurea-crosslinked calcium alginate (X-alginate) aerogels was investigated through batch-type experiments, focusing on low mercury concentrations (50–180 μg·L⁻¹), similar to those found in actual contaminated environments. Within this concentration range, the metal retention was very high, ranging from 85% to quantitative (adsorbent dosage: 0.6 g L⁻¹). The adsorption process followed the Langmuir isotherm model with a sorption capacity of 4.4 mmol kg⁻¹ (883 mg kg⁻¹) at pH 3.3. Post-adsorption analysis with EDS confirmed the presence of mercury in the adsorbent and the replacement of calcium in the aerogel matrix. Additionally, coordination/interaction with other functional groups on the adsorbent surface may occur. The adsorption kinetics were best described by the pseudo-first-order model, indicating a diffusion-controlled mechanism and relatively weak interactions. The adsorbent was regenerated via washing with a Na₂EDTA solution and reused at least three times without substantial loss of sorption capacity. Furthermore, X-alginate aerogels were tested for mercury removal from an industrial wastewater sample (pH 7.75) containing 61 μg·L⁻¹ mercury (and competing ions), achieving 71% metal retention. These findings, along with the stability of X-alginate aerogels in natural waters and wastewaters, highlight their potential for sustainable mercury removal applications. Full article

Calibration is crucial in quantitative analysis, ensuring the traceability of standards for an accurate comparison of results. In mercury determinations, a gas calibrator unit containing liquid mercury is used for calibration by injecting headspace volumes via syringe. The Dumarey equation has been used for over 35 years to calculate mercury headspace concentration, aligning closely with saturated vapor pressure equations. However, the 2006 Huber equation yields different values, creating discrepancies. This paper compares calibrations using the Dumarey equations against NIST 3133 certified reference material, with detection by a cold vapor atomic fluorescence spectrophotometer (CV-AFS). The gas standard was injected directly, while Hg^II in NIST 3133 was reduced to Hg⁰ and captured on gold traps. Across 10–24 °C, the Hg⁰ concentration was determined, with uncertainties ranging from 2.9% to 8.4% for a coverage factor of two. No significant differences were found between calibrations using NIST 3133 and the Dumarey equation. These findings provide crucial insights into the traceability and accuracy of mercury calibration methods, ensuring the reliability of measurements used for environmental monitoring and regulatory compliance. Full article