Search Results (3,749)

The advancement of efficient energy conversion and storage technologies is fundamentally linked to the development of electrochemical systems, including fuel cells, batteries, and electrolyzers, whose performance depends on key electrocatalytic reactions: hydrogen evolution (HER), oxygen evolution (OER), oxygen reduction (ORR), carbon dioxide reduction (CO₂RR), and nitrogen reduction (NRR). Beyond catalyst design, the electrolyte microenvironment significantly influences these reactions by modulating charge transfer, intermediate stabilization, and mass transport, making electrolyte engineering a powerful tool for enhancing performance. This review provides a comprehensive analysis of how fundamental electrolyte properties, including pH, ionic strength, ion identity, and solvent structure, affect the mechanisms and kinetics of these five reactions. We examine in detail how the electrolyte composition and individual ion contributions impact reaction pathways, catalytic activity, and product selectivity. For HER and OER, we discuss the interplay between acidic and alkaline environments, the effects of specific ions, interfacial electric fields, and catalyst stability. In ORR, we highlight pH-dependent activity, selectivity, and the roles of cations and anions in steering 2e⁻ versus 4e⁻ pathways. The CO₂RR and NRR sections explore how the electrolyte composition, local pH, buffering capacity, and proton sources influence activity and the product distribution. We also address challenges in electrolyte optimization, such as managing competing reactions and maximizing Faradaic efficiency. By comparing the electrolyte’s effects across these reactions, this review identifies general trends and design guidelines for enhancing electrocatalytic performance and outlines key open questions and future research directions relevant to practical energy technologies. Full article

Nitrogen oxides (NO_x) emissions pose environmental and health risks. Selective catalytic reduction (SCR) is effective for NO_x removal, and using CO as a reductant can eliminate both NO_x and CO. This study explores CuCe catalysts on SiO₂, Al₂O₃, and TiO₂ for CO-SCR. Results show catalytic activity relates to the synergy between lattice oxygen and CuCe species. TiO₂ enhances this interaction, promoting Cu⁺ and lattice oxygen for NO adsorption and dissociation. The CuCe/TiO₂ catalyst achieves 100% NO conversion at 300 °C and 40.2% at 100 °C, indicating excellent low-temperature performance. These findings are valuable for developing efficient SCR catalysts. Full article

The rapid development of marine recirculating aquaculture systems (RASs) worldwide offers an efficient and sustainable approach to aquaculture. However, the slow start-up of the nitrification process under low-temperature conditions remains a significant challenge. This study evaluated multiple start-up strategies for moving bed biofilm reactors (MBBRs) operating at 13–15 °C. Among them, the salinity-gradient (SG) strategy exhibited the best performance, reducing the start-up time by 38 days compared to the control, with microbial richness (Chao1 index) reaching 396 and diversity (Shannon index) of 4.89. Inoculation with mature biofilm (MBI) also showed excellent results, shortening the start-up period by 26 days and achieving a stable total ammonia nitrogen (TAN) effluent concentration below 0.5 mg/L within 132 days. MBI exhibited the highest microbial richness (Chao1 index = 808) and diversity (Shannon index = 5.55), significantly higher than those of the control (Chao1 index = 279, Shannon index = 3.90) and other treatments. The hydraulic retention time-gradient (HRT) strategy contributed to performance improvement as well, with a 24-day reduction in start-up time and a Chao1 index of 663 and a Shannon index is 4.69. In contrast, nitrifying bacteria addition (NBA) and carrier adhesion layer modification (CALM) had limited effects on start-up efficiency or microbial diversity, with Chao1 indices of only 255 and 228, and Shannon indices were both 3.24, respectively. Overall, the results indicate that salinity acclimation, mature biofilm inoculation, and extended HRT are effective approaches for promoting microbial community adaptation and enhancing MBBR start-up under low-temperature marine conditions. Full article

Microalgae offer a sustainable alternative for wastewater treatment by simultaneously removing pollutants and producing biomass of potential value. This study evaluated five species—Haematococcus pluvialis, Chlorella vulgaris, Chlamydomonas sp., Anabaena variabilis, and Scenedesmus sp.—in three undiluted food and beverage industry effluents from Mexico: nejayote (alkaline wastewater generated during corn nixtamalization for tortilla production), tequila vinasses (from tequila distillation), and cheese whey (from cheese making). Strains were adapted through UV mutagenesis and gradual acclimatization to grow without freshwater dilution. Bioremediation efficiency was assessed via reductions in chemical oxygen demand (COD), total nitrogen (TN), and total phosphates (TPO₄). C. vulgaris achieved complete TN and TPO₄ removal and 90.2% COD reduction in nejayote, while A. variabilis reached 81.7% COD and 79.3% TPO₄ removal in tequila vinasses. In cheese whey, C. vulgaris removed 55.5% COD, 53.0% TN, and 35.3% TPO₄. These results demonstrate the feasibility of microalgae-based systems for treating complex agro-industrial wastewaters, contributing to sustainable and circular wastewater management. Full article

Under refined management, high-yield cotton fields are approaching their maximum output. However, how to break this yield upper limit, specifically the source–sink relationship is still inadequately researched. This experiment was conducted to explore the interaction mechanism between yield formation and source–sink parameters (photosynthesis, nitrogen content, canopy structure and dry matter accumulation and distribution). The treatments consisted of a no cutting source and sink treatment (CK), cutting 1/2 leaves per plant (1/2L) and cutting 1/2 bolls per plant (1/2B) at the initial flowering stage (IFS), the flower and boll stage (FABS), and the full boll stage (FBS). The results showed that 1/2L treatment minimized yield losses to 2.3–5.9% by enhancing photosynthetic compensation, with FBS-1/2L showing the smallest reduction (2.3–2.9%) due to higher leaf N content and SPAD values, whereas, the 1/2B treatments resulted in significant yield losses attributable to fewer bolls, especially the FBS-1/2B treatments, which reduced yields by 35.7–41.9%, with a compensatory rate of only 8.1–14.3%. It is noteworthy that the compensation rates of IFS-1/2B and FABS-1/2B could reach 26.7–32.3% and 18.7–23.8% of their yields due to the higher leaf N content. In a word, the source damage can be buffered by physiological compensation, while the sink loss leads to yield collapse due to the irreversibility of reproductive development. Thus, the core regulator of high-yield cotton fields was sink strength. Accordingly, optimizing the sink quality was performed through moderate boll thinning at the IFS, enhancing water and fertilizer supply at the FABS and strengthening sink organ protection at the FBS in order to realize a breakthrough in yield limit. Full article

Background/Objectives: Nanobubble water (NBW) is being studied increasingly for its potential benefits in sports nutrition. This study aimed to evaluate whether supplementation with ozone-enriched NBW (O₃-NBW) could improve integrated exercise capacity—encompassing endurance performance, muscle strength, and postexercise recovery as well as body composition and metabolic adaptations in mice. Methods: Male ICR mice (n = 24) were allocated into Control, Air-NBW, or O₃-NBW (0.2–1 mg/L ozone) groups for 4 weeks. Results: O₃-NBW treatment considerably enhanced forelimb grip strength and treadmill running endurance compared to the Control group (both p < 0.05). Analyses of body composition revealed a higher proportion of lean mass and muscle glycogen storage in NBW groups, notably with O₃-NBW. Serum markers gathered post-exercise demonstrated a reduction in ammonia and blood urea nitrogen (BUN), suggesting improved nitrogen metabolism. Levels of resting serum creatine kinase (CK) and uric acid were also lower in O₃-NBW mice, indicating potential benefits for muscle recovery. In addition, O₃-NBW treatment significantly enhanced oxygen consumption (VO₂) and reduced the respiratory quotient (RQ), signifying amplified fat oxidation, while also lowering total energy expenditure (all p < 0.05). Spontaneous wheel-running activity remained consistent across all the groups. Conclusions: Taken as a whole, these findings emphasize that O₃-NBW supplementation offers ergogenic and metabolic advantages by improving integrated exercise capacity and efficiency of gas exchange, without adverse effects. Full article

Root architecture and anatomy critically regulate maize nitrogen (N) acquisition, but their coordinated low-N response in N-efficient hybrids remains poorly understood. Elucidating this mechanism is essential for advancing root system regulation and breeding strategies aimed at enhancing N-use efficiency. In this study, six root architectures, twelve root anatomies, and six N-efficiency traits were evaluated in six maize hybrids and nine parental inbreds under sufficient (SN, 180 kg ha⁻¹) and low N (LN, 30 kg ha⁻¹), with transcriptome analysis of inbreds applied to uncover mechanisms. Hybrids were categorized as follows: EE (N-efficient under both N levels), SNE (N-efficient only under SN), and NN (inefficient under both N). Compared with other hybrids, EE developed a 6.0–15.7% narrower root opening angle (ROA), a 11.9–12.4% larger root projected area (RPA), 16.3–22.6% deeper roots (D_Wmax), and 22.6–37.1% more cortical aerenchyma (AA) under LN; SNE showed 9.49–19.51% lower RPA and higher LN-induced reductions in D_Wmax (8.84–17.09%); NN exhibited the largest ROA (60.75–64.48°) and LN-induced reductions in RPA (16.43%), D_Wmax (14.76%), and total projected structure length (11.28%). Correlation, principal component, and structural equation modeling analyses revealed significant root architecture–anatomy integration, and they collectively influence yield through traits such as D_Wmax, AA, and xylem vessel area (XVA) (r = −0.48–0.62, path coefficients: 0.19–0.27). Additionally, the EE and NN hybrids inherited and integrated the superior N-efficient root phenotypes from their parental inbred lines. Transcriptomic analysis identified eight root development genes, including GRMZM5G878558, whose expression correlated with both D_Wmax and AA (r = 0.61–0.73). These findings clarified that N-efficient maize achieved higher yield through coordinated root architecture–anatomy optimization involving associated genes, providing a theoretical foundation for N-efficiency-targeted root regulation and varietal selection. Full article

Mass gatherings such as the annual Hajj pilgrimage in Makkah, Saudi Arabia, generate extreme, short-term anthropogenic emission loads with significant air quality and public health implications. This study assesses the spatiotemporal dynamics of key atmospheric pollutants—including nitrogen dioxide (NO₂), carbon monoxide (CO), sulfur dioxide (SO₂), formaldehyde (HCHO), and aerosols—across Makkah and its holy sites before and during the Hajj seasons of 2023 and 2024. Using high-resolution Sentinel-5P TROPOMI satellite data, pollutant fields were reconstructed at 100 m spatial resolution via cloud-based geospatial analysis on the Google Earth Engine. During Hajj 2023, spatially resolved NO₂ concentrations ranged from 15.4 μg/m³ to 38.3 μg/m³ with an average of 24.7 μg/m³, while SO₂ during the 2024 event peaked at 51.2 μg/m³ in key hotspots, occasionally exceeding World Health Organization (WHO) guideline values. Aerosol index values showed episodic surges (up to 1.43), particularly over transportation corridors, parking areas, and logistics facilities. CO concentrations reached values as high as 1069.8 μg/m³ in crowded zones, and HCHO concentrations surged up to 9.99 μg/m³ during peak periods. Quantitative correlation analysis revealed that during Hajj, atmospheric chemistry diverged from urban baseline: the NO₂–SO₂ relationship shifted from strongly negative pre-Hajj (r = −0.74) to moderately positive during the event (r = 0.35), while aerosol–HCHO correlations intensified negatively from r = −0.23 pre-Hajj to r = −0.50 during Hajj. Meteorological analysis indicated significant positive correlations between wind speed and NO₂ (r = 0.35) and wind speed and CO (r = 0.35) during 2024, demonstrating that extreme emission rates overwhelmed typical dispersive processes. Relative humidity was positively correlated with aerosol loading (r = 0.37), pointing to hygroscopic growth patterns. These results quantitatively demonstrate that Hajj drives a distinct, event-specific pollution regime, characterized by sharp increases in key pollutant concentrations, altered inter-pollutant and pollutant–meteorology relationships, and spatially explicit hotspots driven by human activity and infrastructure. The integrated satellite–meteorology workflow enabled near-real-time monitoring in a data-sparse environment and establishes a scalable framework for evidence-based air quality management and health risk reduction in mass gatherings. Full article

The development of electrocatalysts composed of earth-abundant elements is essential for advancing the commercial application of Proton Exchange Membrane Fuel Cells (PEMFC). Among these, single-atom electrocatalysts, such as Fe-N-C, show great promise for the oxygen reduction reaction (ORR). This study aims to improve the ORR activity and stability of Fe-N-C electrocatalysts by fine-tuning the straightforward 1,10-phenanthroline-iron complexation synthesis method. Key parameters, including iron-to-phenanthroline ratio, carbon powder surface area, and pyrolysis temperature were systematically varied to evaluate their influence on the resulting electrocatalysts. The findings of this study revealed that the electrocatalysts synthesized with 1,10-phenanthroline (Phen) and high-surface-area Black Pearls (BP) possessed much better ORR activity than electrocatalysts prepared by using Vulcan carbon (lower surface area). Interestingly, electrocatalysts prepared with BP, but with a non-bidentate nitrogen-containing ligand molecule, such as imidazole, showed a much poorer activity, as the resulting material predominantly consisted of inactive structures, such as encapsulated iron nanoparticles and iron oxide, as evidenced by HR-TEM, EXAFS, and XRD. Therefore, the results suggest that only the synergistic combination of the bidentate ligand phenanthroline (Phen) and the high-surface-area carbon support (BP) favored the formation of ORR-active Fe-N-C single-atom species upon pyrolysis. The study also unveiled a significant enhancement in electrocatalyst stability during accelerated durability tests (and air storage) as the pyrolysis temperature was increased from 700 to 1300 °C, albeit at the expense of ORR activity, likely resulting from the generation of iron particles. Pyrolysis at 1050 °C yielded the electrocatalyst with the most favorable balance of activity and stability in rotating disk measurements, while maintaining moderate durability under PEM fuel cell operation. The insights obtained in this study may guide the development of more active efficient and durable electrocatalysts, synthesized via a simple method using earth-abundant elements, for application in PEMFC cathodes. Full article

Drilling fluid plays a critical role in drilling engineering. With the deepening implementation of clean production concepts and increasingly stringent environmental regulations, the treatment standards for drilling wastewater at operational sites have been significantly elevated. In response to the characteristics of high oil content, high COD, high chromaticity, high ammonia nitrogen, and total phosphorus content in drilling, the use of fine bubbles to improve gas utilization efficiency and mass transfer effect, combined with ozone gas, is aimed at degrading difficult-to-degrade high-molecular-weight organic compounds, aiming to solve the problems of high viscosity and high oil content in drilling fluids returned from offshore platforms. Indoor simulation experiments have shown that by using ozone fine bubble technology to treat drilling fluids, the viscosity reduction rate can reach over 29%, and the oil removal rate can reach 40%. Ozone fine bubble technology has significant viscosity reduction and oil removal effects on high viscosity drilling fluids. Full article

To explore fertilization strategies that achieve both high yield and emission reduction in greenhouse tomato production, a two-season experiment was conducted in autumn 2023 and spring 2024 under equal nitrogen input. Seven treatments were established: conventional fertilization (CK1), biogas slurry alone (CK2), 0.5% biochar + biogas slurry (T1), 2% biochar + biogas slurry (T2), dicyandiamide + biogas slurry (T3), 0.5% biochar + biogas slurry + dicyandiamide (T4), and 2% biochar + biogas slurry + dicyandiamide (T5). The effects of each treatment on tomato root traits, yield, irrigation water use efficiency (IWUE), partial factor productivity of nitrogen (PFPN), and soil N₂O emissions were systematically evaluated. An analytic hierarchy process (AHP) was applied for comprehensive assessment. The results showed that fertilization treatments significantly affected tomato root traits (p < 0.05), with T5 exhibiting the best performance in root length, average diameter, total surface area, total volume, and root activity, all significantly higher than CK1. T5 also achieved the highest yield in both seasons, with increases of 8.13% (autumn 2023) and 10.19% (spring 2024) over CK1. Moreover, T5 showed superior IWUE (475.38 kg ha⁻¹ mm⁻¹) and PFPN (405.92 kg kg⁻¹). In terms of environmental performance, T5 significantly reduced soil N₂O flux, with the largest reduction reaching 16.16%, particularly during the peak emission stages in the flowering and fruit-setting periods. The AHP-based comprehensive evaluation confirmed that T5 had the highest overall weight with satisfactory matrix consistency. In conclusion, compared with conventional fertilization, the integrated T5 treatment increased tomato yield by up to 10.19% and reduced cumulative N₂O emissions by up to 16.16%, highlighting its potential as a feasible fertilization pathway and technical reference for low-carbon and sustainable agriculture. Full article

Rhabdomyolysis is characterized by the breakdown of skeletal muscle tissue, frequently leading to acute kidney injury (AKI). Traditional conservative treatments have shown limited effectiveness in modifying the disease course, thereby necessitating targeted pharmacological approaches. Zileuton (Z), a selective inhibitor of 5-lipoxygenase (5-LOX), has demonstrated efficacy in enhancing renal function recovery in animal models of AKI induced by agents such as cisplatin, aminoglycosides, and polymyxins. The present study aimed to evaluate the therapeutic potential of a single dose of Z in mitigating rhabdomyolysis-induced AKI (RI-AKI) via modulation of myeloid-derived suppressor cells (MDSCs). Male C57BL/6 mice were assigned to four experimental groups: Sham (intraperitoneal administration of 0.9% saline), Z (single intraperitoneal injection of Z at 30 mg/kg body weight), glycerol (Gly; single intramuscular dose of 50% glycerol at 8 mL/kg), and glycerol plus Z (Z + Gly; concurrent administration of glycerol intramuscularly and Z intraperitoneally). Animals were sacrificed 24 h post-glycerol injection for analysis. Zileuton administration significantly improved renal function, as indicated by reductions in blood urea nitrogen (BUN) levels (129.7 ± 17.9 mg/dL in the Gly group versus 101.7 ± 6.8 mg/dL in the Z + Gly group, p < 0.05) and serum creatinine (Cr) levels (2.2 ± 0.3 mg/dL in the Gly group versus 0.9 ± 0.3 mg/dL in the Gly + Z group p < 0.05). Histopathological assessment revealed a marked decrease in tubular injury scores in the Z + Gly group compared to the Gly group. Molecular analyses demonstrated that Z treatment downregulated mRNA expression of macrophage-inducible C-type lectin (mincle) and associated macrophage infiltration-related factors, including Areg-1, Cx3cl1, and Cx3CR1, which were elevated 24 h following glycerol administration. Furthermore, the expression of NLRP-3, significantly upregulated post-glycerol injection, was attenuated by concurrent Z treatment. Markers of mitochondrial biogenesis, such as mitochondrial DNA (mtDNA), transcription factor A mitochondrial (TFAM), and carnitine palmitoyltransferase 1 alpha (CPT1α), were diminished 24 h after glycerol injection; however, their expression was restored upon simultaneous Z administration. Additionally, Z reduced protein levels of BNIP3, a marker of mitochondrial autophagy, while enhancing the expression of peroxisome proliferator-activated receptor gamma coactivator 1-alpha (PGC-1α), suggesting that Z ameliorates RI-AKI severity through the regulation of mitochondrial quality control mechanisms. Zileuton also decreased infiltration of CD11b(+) Gr-1(+) MDSCs and downregulated mRNA levels of MDSC-associated markers, including transforming growth factor-beta (TGF-β), arginase-1 (Arg-1), inducible nitric oxide synthase (iNOS), and iron regulatory protein 4 (Irp4), in glycerol-injured kidneys relative to controls. These markers were elevated 24 h post-glycerol injection but were normalized following concurrent Z treatment. Collectively, these findings suggest that Zileuton confers reno-protective effects in a murine model of RI-AKI, potentially through modulation of mitochondrial dynamics and suppression of MDSC-mediated inflammatory pathways. Further research is warranted to elucidate the precise mechanisms by which Z regulates MDSCs and to assess its therapeutic potential in clinical contexts. Full article

This study investigates the hydrothermal liquefaction (HTL) of sewage sludge across a temperature range of 250–375 °C, combined with selective solvent extraction and catalytic hydrotreatment to produce high-quality biocrude. Four solvents including dichloromethane (DCM), hexane, ethyl butyrate (EB), and ethyl acetate (EA), were used to evaluate temperature-dependent extraction performance and product quality. Biocrude yields increased from 250 °C to a maximum at 350 °C for all solvents: hexane (9.3–18.1%), DCM (16.3–49.7%), EB (17.6–50.1%), and EA (9.6–23.5%). A yield decline was observed at 375 °C due to secondary cracking and gasification. Elemental analysis revealed that hexane and EB extracts had higher carbon (up to 61.6 wt%) and hydrogen contents, while DCM retained the most nitrogen (up to 3.96 wt%) due to its polarity. Sulfur remained below 0.5 wt% in all biocrudes. GC–MS analysis of 350 °C biocrudes showed fatty acids as dominant components (43–53%), especially palmitic acid, along with ketones, amides, and heterocyclic compounds. Hydrotreatment using Ni/SiO₂–Al₂O₃ significantly enhanced biocrude quality by increasing alkane content by 40–60% and reducing nitrogen levels by up to 75%, with higher heating values reaching 38–44 MJ/kg. These findings demonstrate the integrated potential of HTL process tuning, green solvent extraction, and catalytic upgrading for converting sewage sludge into cleaner, energy-dense biofuels. Full article

Global warming and climate deterioration are primarily driven by massive greenhouse gas emissions, making the comprehensive assessment of agricultural emissions imperative. This study integrates multiple datasets to achieve three objectives: (1) quantifying agricultural greenhouse gas emissions, (2) identifying regional influencing factors, and (3) exploring mitigation strategies. In this study, a random forest regression model was used to fit the data, providing a new perspective for the analysis of emission factors. Key findings reveal fertilization and irrigation as the dominant emission drivers, with significant regional variations. Specifically, (1) fertilization practices, particularly nitrogen application, exert a greater influence than phosphorus on carbon emissions; (2) irrigation impacts correlate strongly with regional water usage patterns among staple crops; (3) distinct emission patterns emerge across China’s northeast–southwest divide, reflecting variations in grain crop impacts and climatic responses. The study proposes three mitigation approaches: precision fertilization, adaptive irrigation management, and crop structure optimization. These strategies provide actionable pathways for China to meet agricultural emission reduction targets while advancing sustainable development goals. Full article

Agricultural tractors possess front loaders that are employed for the handling and transportation of materials, but are exposed to mechanical vibrations and shocks from ground undulations and sudden variations in the load. These vibrations are harmful to the durability of the parts, the comfort of the driver, and the longevity of the machine. In this current study, the performance of the hydraulic accumulator to mitigate such vibrations for a Foton 904 wheeled tractor equipped with a TZ10C-824 front loader is studied. Vibration measurements were taken by an experimental Brüel & Kjær 3050-A040 analyzer under various loading configurations (no loading, 180 kg, and 312 kg), with or without a 1.4 L, 50-bar nitrogen gas-charged Fox Opera Mi Italy hydraulic accumulator. Results reveal that maximum accelerations were as much as 6.24 m·s⁻² without an accumulator during testing of a 312 kg load, whereas they were extremely low at 2.66 m·s⁻² when the accumulator was activated. Frequency-domain analysis verified that the main vibrations were within the range of 3–4 Hz, with FFT peak amplitudes dropping from 5.6 m·s⁻² to 2.4 m·s⁻² upon the accumulator’s operation. The observations verify the effectiveness of the accumulator in vibration intensity reduction, absence of high-frequency shock loads, and ride comfort, along with structural safety improvement. The study provides a solid platform for further enhancement in vibration control techniques for agricultural machines and loader system design. Full article