Search Results (133)

Two indolocarbazole-based host materials, namely, 5,7-di([1,1′:3′,1″-terphenyl]-5′-yl)-3,9-di-tert-butyl-5,7-dihydroindolo[2,3-b]carbazole (InCz-TP) and 4,4′-(3,9-di-tert-butylindolo[2,3-b]carbazole-5,7-diyl)bis(N,N-diphenylaniline) (InCz-TPA), were designed and synthesized for application in red phosphorescent organic light-emitting diodes (OLEDs). In these systems, bulky substituents possessing tailored electron-donating characteristics were incorporated into the indolocarbazole core. The triplet energy levels were experimentally determined to be 2.81 eV and 2.78 eV, indicating that both materials are appropriate host candidates for red phosphorescent OLEDs. Device evaluations revealed that InCz-TPA delivered superior performance compared to InCz-TP, reaching a maximum external quantum efficiency (EQE) of 8.50%, which corresponds to a 36% enhancement. Both devices exhibited an electroluminescence peak at 628 nm along with nearly identical CIE coordinates of (0.678, 0.317) and (0.680, 0.318), suggesting efficient energy transfer between host and dopant. Full article

Single-molecule white-light emitters have attracted much attention due to their potential applications in white organic light-emitting diodes (WOLEDs). Their key advantage lies in the ability to use a simple device structure, akin to that of monochromatic OLEDs, to produce WOLEDs. This approach not only simplifies the fabrication process but also reduces costs, improves device stability, and provides a shortcut for the rapid commercialization of WOLEDs. In this study, two novel single-molecule white-light emitters, SRFR-1PTZ (10-(4′-(9H-9,9′-spirobi[fluoren]-2-yl)-4a,10a-dihydro-10H-phenothiazine) and SRFR-2PTZ (2,7-bis(4a,10a-dihydro-10H-phenothiazin-10-yl)-9,9′-spirobi[fluorene]), were designed and synthesized, and successfully implemented in WOLED devices. Comprehensive photophysical characterization revealed that both compounds exhibited dual-emission characteristics in dichloromethane solution, displaying simultaneous fluorescence and phosphorescence. Notably, thermally activated delayed fluorescence (TADF) was clearly observed for SRFR-1PTZ, whereas SRFR-2PTZ did not exhibit TADF behavior. Electroluminescence studies demonstrated that both SRFR-1PTZ and SRFR-2PTZ served as good color-stable cool-white-light emitters under driving voltages of 7–10 V. Full article

Traditional power management for organic electroluminescent (OLED) displays is performed by two different converters, providing both positive and negative power rails and thus raising fabrication costs due to the usage of two inductors, in addition to efficiency being dependent on one of the two converters while also suffering from high-voltage stress. This paper introduces a bipolar converter that only uses a single inductor to generate both power rails for OLED displays, along with two additional flying capacitors to reduce inductor currents and voltage stress placed on the power switches. The proposed design implemented in the 180 nm CMOS process occupies a chip area of 0.98 mm² and achieves a peak efficiency of 93% at 350 mA load current. Furthermore, the ripple voltage is greatly reduced using both common-mode and differential-mode feedback loops in the PWM control scheme, with a maximum ripple of 20 mV across a 100–500 mA current range. Full article

In this paper, composite structures were fabricated by incorporating silver nanowires (AgNWs) with various metal oxides via the sol–gel method. This approach enhanced the electrical performance of AgNW-based transparent electrodes while simultaneously improving their stability under damp heat conditions and modifying the local medium environment surrounding the AgNW meshes. The randomly distributed AgNW meshes fabricated via drop-coating were treated with plasma to remove surface organic residues and reduce the inter-nanowire contact resistance. Subsequently, a zinc oxide (ZnO) coating was applied to further decrease the sheet resistance (R_sheet) value. The pristine AgNW mesh exhibits an R_sheet of 17.4 ohm/sq and an optical transmittance of 93.06% at a wavelength of 550 nm. After treatment, the composite structure achieves a reduced R_sheet of 8.7 ohm/sq while maintaining a high optical transmittance of 92.20%. The use of AgNW meshes as window electrodes enhances electron injection efficiency and facilitates the coupling mechanism between localized surface plasmon resonances and excitons. Compared with conventional ITO transparent electrodes, the incorporation of the AgNW mesh leads to a 17-fold enhancement in ZnO emission intensity under identical injection current conditions. Moreover, the unique scattering characteristics of the AgNW and metal oxide composite structure effectively reduce photon reflection at the device interface, thereby broadening the angular distribution of emitted light in electroluminescent devices. Full article

Organic light-emitting diodes (OLEDs) have attracted remarkable interest in display and lighting. To effectively address triplet exciton harvesting and enhance external quantum efficiency (EQE), delayed fluorescence AIEgens have gained significant prominence. The primary luminescence mechanism involves the efficient harvesting of triplet excitons via reverse intersystem crossing (RISC) channels, categorized into three types: thermally activated delayed fluorescence (TADF), hybridized local and charge transfer (HLCT), and triplet–triplet annihilation (TTA). In this review, we summarize the recent development of doped and non-doped delayed fluorescent AIEgens-based OLEDs. This review mainly discusses the molecular design strategies and photophysical properties of delayed fluorescent AIEgens and the electroluminescent properties of OLEDs as emitting layers. Finally, the challenges and prospects of delayed fluorescent AIEgens for the fabrication of OLEDs are also briefly discussed. Full article

Organic light-emitting diodes (OLEDs) have the advantages of high efficiency and high color purity, which gives them great potential and application prospects in the field of display technology, and thus they have been of wide interest for scholars and industry. Due to their nature, when using the first generation of fluorescent materials, only 25% of the excitons are used, while the rest are wasted, meaning the device efficiency does not exceed 25%. The second generation of phosphorescent materials solves this problem by utilizing 25% singlet excitons while utilizing 75% triplet excitons, achieving 100% internal quantum efficiency. Therefore, a third generation of materials, namely Thermally Activated Delayed Fluorescence (TADF) materials, has been developed, and these are able to use the small singlet–triplet energy gap to allow excitons on the triplet state to upconvert back to the single state, which improves the utilization of triplet excitons. These TADF materials can also reach 100% maximum internal quantum efficiency, but they have many problems, such as low color purity and serious efficiency roll-off. Therefore, researchers have designed hyperfluorescent materials, which possess high efficiency, high color purity, and a long lifetime, showing tremendous potential and application prospects in the field of display technology. This report takes hyperfluorescent OLEDs as the entry point and the molecular design and luminescence mechanism of hyperfluorescent materials are reviewed, considering blue, green, red, and white light. Full article

White organic light-emitting diodes (OLEDs) offer a promising solution for next-generation lighting technologies and their ability to emit white light through various mechanisms make them an attractive option for illumination and display applications. Here, we design and prepare a series of N,N-difluorenevinylaniline-based small molecules and polymer, and realize white OLEDs based on these luminescent materials with combined blue monomer emission and orange electromer emission upon electronic excitation in the solution-processed devices. Impressively, the single-component nonconjugated polymer exhibits the best device performance, because the nonconjugated structure favors good solubility of the polymers, while the conjugated starburst unit functions as highly luminescent fluorophore in both single molecular and aggregated structures for the blue and orange emissions, respectively. Specifically, the non-doped solution-processed OLEDs achieve warm white electroluminescence with a maximum luminance of 1806 cd/m² and a maximum external quantum efficiency of 2.63%. And, the OLEDs based on the monomer also exhibit white electroluminescence with Commission Internationale de L’Eclairage coordinates of (0.30, 0.32). These results highlight a promising strategy for the material design and preparation of single-component nonconjugated polymers with rich emissive behaviors in solid states towards efficient and solution-processable white OLEDs. Full article

Host engineering is one of the most efficient approaches to maximizing the electroluminescent performance of organic light-emitting devices. Herein, two carbazole-based N,N′-Dicarbazolyl-4,4′-biphenyl (CBP) derivatives, (9-(4′-(9H-carbazol-9-yl)-[1,1′-biphenyl]-4-yl)-3-(3-(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl)-9H-carbazole (CBPmBI), and (9-(4′-(9H-carbazol-9-yl)-[1,1′-biphenyl]-4-yl)-9H-carbazol-3-yl)diphenylphosphine oxide (CBPPO), were designed as bipolar hosts for blue phosphorescent devices. By introducing the electron-withdrawing groups to the backbone of CBP, the bipolar hosts exhibited high triplet energy, enhanced thermal stability, and balanced charge transport. The device constructed with the blue guest emitter bis[2-(4,6-difluorophenyl) pyridinato-C2,N]iridium (III) (FIrpic) showed the excellent electroluminescence performance. For instance, the CBPPO-based devices achieved a maximum current efficiency of 28.0 cd/A, a power efficiency of 25.8 lm/W, and an external quantum efficiency of 14.4%. Notably, the external quantum efficiency retained at14.1% under the brightness of 5000 cd/m², featuring the negligible efficiency roll-off. Full article

Tandem white organic light-emitting diodes (OLEDs), formed by stacking red, green, and blue organic electroluminescent units, offer a promising route toward high-resolution microdisplays. However, their performance is constrained by the intrinsically short lifetime of blue OLED sub-units. Replacing the unstable blue OLED with a long-lived GaN-based LED could address this limitation, but practical hybridization remains difficult because of incompatible fabrication routes and significant current imbalance between the inorganic and organic units. Here, we demonstrate the first hybrid GaN–OLED tandem white LEDs enabled by an interface-engineered charge-generation unit (CGU). By introducing an ITO/HAT-CN/LiNH₂-doped Bphen CGU, we simultaneously enhance the work function, strengthen the built-in electric field, and smooth the interfacial morphology. These synergistic effects promote efficient charge generation, yielding near-ideal voltage summation and well-balanced electron–hole injection. As a result, the hybrid tandem device shows a nearly twofold increase in current efficiency (from 28.1 to 58.6 cd A^–1) and significantly reduced spectral shift under varying current densities. We further demonstrate the generality of this approach by integrating the GaN emission with yellow OLEDs to produce stable blue–yellow hybrid white emission. This work establishes an applicable strategy for integrating GaN-LEDs and OLEDs, opening a pathway toward efficient, stable, and compact white light engines for next-generation microdisplay technologies. Full article

In organic solids, the heterogeneous distribution of organic molecules in the solid state gives rise to novel structure–property relationships. Here, we use transmission electron microscopy to investigate the aggregated structure of organic solid of a typical phosphorescent molecule Ir(ppy)₃ at the atomic scale. Through the identification of heavy Ir atoms in the molecular structure, we reveal the existence of organic crystals, clusters and single molecules in the solids. Through electron energy loss spectroscopy, we explore the vibration modes of molecules and lattices in the solids and possible perturbations by excitons induced by electron beam, which could affect the electroluminescent property of the molecules. Full article

The development of high-speed computers and electronic memories, high-frequency communication networks, electroluminescent and photovoltaic devices, flexible displays, and more requires new materials with unique properties, such as a low dielectric constant, an adjustable refractive index, high hardness, thermal resistance, and processability. SiOC coatings possess a number of desirable properties required by modern technologies, including good heat and UV resistance, transparency, high electrical insulation, flexibility, and solubility in commonly used organic solvents. Chemical vapor deposition (CVD) is a very useful and convenient method to produce this type of layer. In this article we present the results of studies on SiOC coatings obtained from tetramethylcyclotetrasiloxane in a remote hydrogen plasma CVD process. The elemental composition (XPS, EDS) and chemical structure (FTIR and NMR spectroscopy-¹³C, ²⁹Si) of the obtained coatings were investigated. Photoluminescence analyses and ellipsometric and thermogravimetric measurements were also performed. The surface morphology was characterized using AFM and SEM. The obtained results allowed us to propose a mechanism for the initiation and growth of the SiOC layer. Full article

Advances in OLED display technology have increased the demand for high-performance luminescent materials, yet efficient red emitters with narrow emission spectra remain rare. Here, two new polycyclic compounds (O-QA and S-QA) are designed by incorporating oxygen/sulfur into a carbonyl/nitrogen skeleton. Photophysical and theoretical studies reveal their hybridized local and charge-transfer state characteristics. In toluene, O-QA and S-QA show photoluminescence peaks at 586/579 nm with narrow emission spectra, while doped films exhibit strong red emissions peaking at 598/600 nm with high PL quantum yields of 67%/60%. The OLEDs using these emitters achieve red electroluminescence (EL) peaks at 598/602 nm, and attain maximum external quantum efficiencies of 7.36%/14.54%. This work may provide guidance for the development of narrow-spectrum red emitters based on carbonyl/nitrogen frameworks. Full article

A zinc complex bearing a pyrazolone-based azomethine ligand has been synthesized for blue-emitting organic light-emitting diodes (OLEDs). The azomethine ligand H₂L and the complex [ZnL·H₂O] were characterized by IR, 1H NMR, XRD, and TGA/DSC techniques. According to a single-crystal X-ray diffraction analysis, the complex [ZnL·H₂O] has a molecular structure. Its solid-state PL maxima appear to be at 416 nm and emit moderate blue emission with a quantum yield (QY) of 2%, with a dehydrated form of the complex showing greater efficiency with a QY of 55.5%. ZnL-based electroluminescent devices for OLED applications were fabricated. The devices exhibit blue emission with brightness up to 5300 Cd/A. Full article

Two blue fluorescent dopants were designed and successfully synthesized, 5-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho [3,2,1-de]anthracen-7-yl)-5H-benzo[b]carbazole (TDBA-Bz) and 9-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracen-7-yl)-9H-carbazole (TDBA-Cz). Both in solution and the film state, the two emitters demonstrated deep-blue luminescence characteristics. In solution-processed organic light-emitting diodes (OLEDs), TDBA-Bz and TDBA-Cz used as dopant materials showed electroluminescence peaks at 436 nm and 413 nm, respectively. The corresponding CIE color coordinates were determined to be (0.181, 0.114) for TDBA-Bz and (0.167, 0.086) for TDBA-Cz. The solution-processed device using TDBA-Cz as a dopant exhibited a current efficiency (CE) of 7.25 cd/A and an external quantum efficiency (EQE) of 6.45%, demonstrating higher efficiencies compared to the device with TDBA-Bz. In particular, at a luminance of 2000 cd/m², TDBA-Cz maintained an EQE of 4.81%, with only a slight decrease from its maximum EQE. Full article

Here, we present two series of new electroactive compounds containing electron donors (carbazolyl) and electron acceptor (pyridinyl) fragments as potential host materials. The objective compounds 9-(2-ethylhexyl)-3,6-di [3-(methoxypyridin-3-yl)carbazol-9-yl]carbazoles RB71 and RB74 were synthesized by an Ullmann coupling reaction between the intermediate derivatives: 9-(2-ethylhexyl)-3,6-diiodocarbazole and corresponding 3-(methoxypyridin-3-yl)-9H-carbazole. Other target derivatives, 9-alkyl-3-[N-(9-alkylcarbazol-3-yl)-N-(4-methylpyridin-2-yl)amino]carbazoles RB70 and RB75, were also prepared, according to the Ullmann reaction method, from 2-amino-4-methylpyridine and the corresponding 3-iodo-9-alkylcarbazole. Thermogravimetric analysis confirmed that the new derivatives are highly thermally stable compounds, with 5% weight loss in the temperature range of 349 °C to 488 °C. According to differential scanning calorimetry results, some amorphous materials exhibit very high glass transition temperatures exceeding 150 °C in some cases, which is a significant advantage for compounds with potential applications in organic light-emitting devices. The electroluminescent properties of devices utilizing the new hosts RB71 or RB70 with 5.0, 10.0, 15.0, and 20.0 wt.% concentrations of the dopant tris(2-phenylpyridine)iridium(III), Ir(ppy)₃, were demonstrated. All the PhOLEDs emitted light at approximately 515 nm with CIE coordinates of (0.30, 0.61) due to Ir(ppy)₃ emissions. The most efficient device with RB71 host demonstrated a maximum power efficacy of 8.0 lm/W, maximum current efficiency of 12.7 cd/A, and maximal external quantum efficiency of 5.4% with a relatively low turn-on voltage of 4.3 eV, as well as luminance exceeding 4000 cd/m². Additionally, 15 wt.% Ir(ppy)₃ emitter-based PhOLED with RB70 host outperformed the other devices by displaying a maximum power efficacy of 9.6 lm/W, maximum current efficiency of 16.0 cd/A, and maximal external quantum efficiency of 6.7% with a relatively low turn-on voltage of 3.7 eV, as well as luminance reaching 11,200 cd/m². Some devices seem to exhibit higher efficiencies than those previously reported for OLEDs that utilize a 4,4′-bis(9-carbazolyl)-2,2′-biphenyl (CBP) host. Full article