Search Results (463)

Fungal laccases oxidize a wide range of substrates with a diverse spectrum of subsequent non-specific free radical reactions, leading to the production of unwanted byproducts. This work describes a unique recombinant alkaliphilic laccase from Paramyrothecium roridum VKM F-3565 capable of performing specific oligomerization of phenylpropanoids (precursors of natural lignin and lignans) in a neutral environment, thus preventing the reverse reaction of depolymerization which occurs in an acidic environment. The recombinant alkaliphilic laccase from P. roridum VKM F-3565 with a specific enzyme activity of about 154.0 U/mg (in the reaction with 1 mM ABTS) was obtained using a Komagataella phaffii transformant with a yield of 20 ± 1.5 mg/L. The recombinant laccase had an increased degree of N-glycosylation (MW = 97 kDa), higher pH optimum in reaction with phenylpropanoids and a decreased temperature optimum, compared to the wild-type laccase. The enzyme exhibited great resistance to surfactants and the EDTA in the neutral conditions rather than the acidic ones, whereas its tolerance to mono- and divalent-metal ions was high at acidic conditions. This work demonstrates the important role of N-glycosylation of the alkaliphilic laccase of P. roridum VKM F-3565 in its functional activity. The presence of pH-dependent reactions makes the studied laccase attractive for the phenylpropanoid oligomerization with the production of novel oligomeric phenylpropanoid derivatives for industrial and pharmacological purposes. Full article

Halophytes such as Salicornia europaea rely on biochemical and structural mechanisms to survive in saline environments. This study aimed to evaluate oxidative stress and structural defense responses in four inland populations—Poland (Inowrocław, Ciechocinek), Germany (Salzgraben-Salzdahlum, Salz), and Soltauquelle (Soltq)—subjected to 0, 200, 400, and 1000 mM NaCl, using non-destructive, image-based approaches. Lipid peroxidation was assessed via malondialdehyde (MDA) detected with Schiff’s reagent, and hydrogen peroxide (H₂O₂) accumulation was visualized with 3,3′-diaminobenzidine (DAB). Roots and shoots were analyzed through colour image analysis and quantified using a computer vision system (CVS). MDA accumulation revealed population-specific differences, with Salz tending to exhibit lower peroxidation, characterized by lower L* ≈ 42–43 and higher b* ≈ 37–18 in shoots at 200–400 mM, which may reflect a potentially more effective salt-management strategy. Although H₂O₂ responses deviated from a direct salinity-dependent trend, particularly in the tolerant Salz and Soltq populations, both approaches effectively tracked population-specific adaptation, with German populations displaying detectable basal H₂O₂ levels, consistent with its multifunctional signalling role in salt management and growth regulation. Structural defences were further explored through histochemical mapping and image analysis of pectin and lignin distribution, which revealed population-specific patterns consistent with cell wall remodelling under stress. Non-destructive, image-based methods proved effective for detecting oxidative and structural responses in halophytes. Such a non-destructive, cost-efficient, and reproducible approach can accelerate the identification of salt-tolerant ecotypes for saline agriculture and reinforce S. europaea as a model species for elucidating salt-tolerance mechanisms. Full article

Biomass reforming under mild conditions for synergistic hydrogen production, driven by renewable solar energy, has rapidly emerged as a promising strategy that not only enables the efficient reutilization of biomass but also facilitates the generation of high-purity hydrogen. In this work, ZnCdS (ZCS) nanoparticles and CoWO₄ (CW) nanocrystals were assembled via a solvothermal method to construct a ZCS/CW S-type heterojunction composite. The resultant materials’ physicochemical characteristics were methodically described. With lignin model compounds (PP-ol) and sodium lignosulfonate as substrates, the ZnCdS/CoWO₄-10% catalyst demonstrated a significant generation of hydrogen activity, producing hydrogen at rates of 223.30 μmol·g⁻¹·h⁻¹ and 140.28 μmol·g⁻¹·h⁻¹, respectively, according to experimental results. The formation of heterojunctions endows composite photocatalysts with higher hydrogen evolution rates compared to single-component catalysts. This is attributed to energy band bending at the interface of the heterojunction, which facilitates efficient charge separation while maintaining strong redox capabilities. High-value compounds like phenol and acetophenone were formed when the oxidation products in the post-reaction lignin model compound solution were subsequently analyzed using high-performance liquid chromatography. Additionally, a convincing mechanism for the catalytic reaction was suggested. It is expected that this study will offer a viable route for the creation of effective photocatalytic materials, high-value organic waste transformation, and sustainable hydrogen production. Full article

(1) Background: Developing fully bio-based lubricating greases requires eco-friendly alternatives to conventional harmful components. This study highlights unmodified nanocellulose as an effective structuring agent in vegetable oils, enabling 100% bio-based formulations. (2) Methods: Three bio-based greases were formulated using 1.4 wt.% cellulose nanofibers (CNFs), derived from elm wood pulp through mechanical and chemical pretreatment, as thickening agents in castor oil. Their tribological performance was evaluated under varying temperatures and contact loads and compared to a reference lithium-based grease (LBG) containing 14 wt.% thickener, also formulated with castor oil. (3) Results: Among the CNFs, the unbleached variant (CNF-U) which retained the highest lignin content exhibited the highest coefficient of friction (COF), ranging from 0.09 to 0.14 across test conditions, along with a wear scar diameter of approximately 615 µm at 60 °C. Notable differences in shear stress sensitivity were observed between mechanically and chemically treated nanofibers. The TEMPO-oxidized nanofiber (CNF-TO) grease demonstrated outstanding lubrication stability across contact loads of 10–40 N and temperatures from 25 to 100 °C, maintaining COF values below 0.1—comparable to the reference LBG at 40 N load. Wear scar analysis confirmed that CNF-based greases significantly reduced wear relative to the lithium reference: CNF-B produced the smallest scar diameter (188 µm at 25 °C) while CNF-TO yielded the lowest at 60 °C (457 µm). (4) Conclusions: Nanofiber type and pretreatment significantly impact the tribological performance of CNF-based biogreases. TEMPO-oxidized CNFs provided stable lubrication under varied loads and temperatures, while all CNFs showed strong thermal adaptability, supporting their use in sustainable lubrication. Full article

Spent coffee grounds (SCG) constitute a significant organic waste stream with considerable potential for bioenergy recovery. This review critically examines the viability of anaerobic digestion (AD) as a sustainable valorization pathway for SCG, addressing both technical and environmental challenges. Due to their elevated lignin levels, lipid content, and inhibitory substances, SCG exhibit strong recalcitrance that limits their direct digestibility in anaerobic systems. Therefore, a range of pretreatment methods, including oil extraction, alkaline hydrolysis, thermo-alkaline processes, oxidative treatments, and hydrothermal techniques, are evaluated for their effectiveness in enhancing biodegradability and methane yields. Co-digestion with nutrient-rich substrates is explored as a strategy to improve process stability, mitigate inhibitory effects, and optimize nutrient balance. Furthermore, techno-economic and life cycle assessments underscore the feasibility of SCG-based AD compared to conventional waste management practices. The integration of SCG digestion into biorefinery models offers a promising approach to energy recovery, resource efficiency, and waste minimization within a circular bioeconomy framework. This review highlights the need for continued optimization and scale-up to fully harness the potential of SCG in renewable energy systems. Full article

Lignin holds significant promise as a feedstock for biocrude production via hydrothermal liquefaction (HTL). Although lignin HTL has been widely studied, the specific depolymerization pathways associated with distinct lignin structures remain largely unexplored. This study investigates the HTL of four structurally diverse lignins: alkaline (AL), dealkaline (DAL), organosolv (OL), and lignosulfonate (LS) across 270–310 °C to elucidate structure-specific mechanisms governing biocrude yield and composition. AL and OL achieved the highest yields (16.8 ± 0.3% and 16.8 ± 2.5%), with AL-derived biocrude showing the highest carbon content (70.2 ± 0.0%) and HHV (31.0 ± 0.2 MJ/kg). In contrast, DAL and LS produced lower yields and inferior fuel quality due to higher sulfur content and lower carbon enrichment. The structures of AL and DAL, containing fewer methoxy groups, produced guaiacol-rich biocrudes (46.6% and 69.5%). Methylation in AL formed alkyl guaiacols and veratroles, while DAL favored side-chain oxidation. OL retained complex structures, forming syringols and desaspidinol, which contributed to heavier biocrude compounds. Sulfonate groups in LS were stabilized mostly as sulfides, leading to elevated sulfur content. These findings provide mechanistic insight into how lignin structure governs HTL behavior, enabling targeted control of biocrude yield and quality for renewable fuel production. Full article

The extraction of cellulose from underutilized forest residues can diversify bio-based material supply chains and reduce pressure on commercial pulps. In this study, cellulose was isolated from Tibouchina lepidota (Bonpl.) Baill pruning residues through an alkaline–acid–oxidative protocol, and its suitability for polymeric applications was evaluated. Two granulometric fractions (250 µm and 125 µm) were used; the yields were 4.73 ± 0.12 g and 3.62 ± 0.11 g per 50 g of biomass, equivalent to 90.5% and 92.8% recovery, respectively (fractional remains as bleached pulp after removal of non-cellulosic components). Fourier Transform Infrared spectroscopy (FTIR) showed the disappearance of lignin and hemicelluloses bands and a pronounced β-glucopyranosic signal at 894 cm⁻¹, indicating high purity. Selective solubility in 17.5% NaOH classified the polymer as β-cellulose, suitable for wet spinning and film regeneration. Optical microscopy revealed smooth fibers of 25–50 µm length and 0.5–1 µm diameter, with aspect ratios ≥ 50, indicating favorable morphology for load transfer in composites. Statistical analysis (Shapiro–Wilk, F-test, and Student’s t-test) confirmed the significant influence of particle size on yield (p < 10⁻¹⁵). Overall, T. lepidota residues constitute a viable source of high-purity β-cellulose, whose molecular integrity and microstructure satisfy the requirements of sustainable polymeric manufacturing. Full article

This study presents a comprehensive investigation of a novel graphene oxide/zinc oxide/lignin (GO/ZnO/lignin) nanocomposite for the photocatalytic degradation of methylene blue (MB) and gentian violet (also known as crystal violet, CV) dyes in aqueous solutions. The nanocomposite was synthesized through a hydrothermal method and thoroughly characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). FTIR spectra confirmed the successful incorporation of functional groups from all components, while XRD patterns revealed a well-crystallized structure with characteristic peaks. SEM micrographs showed a uniform, hierarchical morphology and EDX analysis verified the elemental composition and distribution. Under ultraviolet (UV) irradiation, the nanocomposite exhibited remarkable photocatalytic degradation efficiency (~97%) for both MB and CV. Key operational parameters were systematically evaluated, including pH (2–10), catalyst dosage (0.005–0.04 g/20 mL), and initial dye concentration (10–20 ppm). Optimal performance was achieved at pH 10, with a catalyst dosage of 0.03–0.04 g/20 mL and lower dye concentrations. The enhanced photocatalytic activity can be attributed to the synergistic effects coming from GO’s electron transport capabilities, ZnO’s strong photocatalytic activity and lignin’s additional degradation sites. Furthermore, the nanocomposite demonstrated excellent reusability, retaining nearly 60% of its degradation capacity after four cycles, outperforming its individual components. These results highlight the potential of this composite material for sustainable wastewater treatment applications. Full article

Soybean (Glycine max (L.) Merrill) is highly sensitive to water deficit, particularly during the vegetative phase, when morphological and metabolic plasticity support continued growth and photosynthetic efficiency. We applied eleven water regimes, from full irrigation (W100) to total water withholding (W0), to plants grown under controlled conditions. After 14 days, we quantified morphophysiological, biochemical, leaf optical, gas exchange, and chlorophyll a fluorescence traits. Drought induces significant reductions in leaf area, biomass, pigment pools, and photosynthetic rates (A, g_s, ΦPSII) while increasing the levels of oxidative stress markers (electrolyte leakage, ROS) and proline accumulation. OJIP transients and JIP test metrics revealed reduced electron-transport efficiency and increased energy dissipation for many parameters under severe stress. Principal component analysis (PCA) clearly separated those treatments. PC1 captured growth and water status variation, whereas PC2 reflected photoprotective adjustments. These data show that progressive drought limits carbon assimilation via coordinated diffusive and biochemical constraints and that the accumulation of proline, phenolics, and lignin is associated with osmotic adjustment, antioxidant buffering, and cell wall reinforcement under stress. The combined use of hyperspectral sensors, gas exchange, chlorophyll fluorescence, and multivariate analyses for phenotyping offers a rapid, nondestructive diagnostic tool for assessing drought severity and the possibility of selecting drought-resistant genotypes and phenotypes in a changing stress environment. Full article

The presence of galena, sphalerite (cleiophane), and Carbonaceous Material (CM) in sulphide ore complicates the application of a direct-differential flotation flowsheet due to increased mutual interactions between both marketable concentrates and final tailings. Flotation tests, measurements of electrokinetic (zeta) potential, adsorption of sulphydric collectors, and colorimetric indicators were employed to elucidate the cause-and-effect relationships underlying the reduction in contrast of the flotation properties of galena and cleiophane surfaces. It was established that galena and cleiophane exhibit comparable flotation responses when using diesel oil within a pH range of 6–8. While high galena recovery is anticipated, the similar recovery of cleiophane is attributed to the ZnS zeta potential approaching zero in this pH interval. Experimental results demonstrated a distinct difference in the flotation behavior of galena and cleiophane, both with natural surface oxidation and following the removal of sulphoxy films. The application of Carbonaceous Material depressants derived from wood processing by-products (lignin-sulphonates) resulted in a significant decrease in sphalerite recovery. Although the flotation rate constant for Carbonaceous Material in the presence of lignin-sulphonate-based depressants decreases, the overall recovery to concentrate increases over time. The implementation of a bulk-differential flowsheet, involving the preliminary removal of CM prior to the bulk Pb-Zn flotation of lead-zinc sulphide ore, has been demonstrated to be effective. Full article

Packaging demand currently exceeds 144 Mt per year, of which >90% is conventional plastic, generating over 100 Mt of waste and 1.8 Gt CO₂-eq emissions annually. In this review, we systematically survey three classes of lignocellulosic feedstocks, agricultural residues, fruit and vegetable by-products, and forestry wastes, with respect to their physicochemical composition (cellulose crystallinity, hemicellulose ratio, and lignin content) and key processing pathways. We then examine fabrication routes (solvent casting, extrusion, and compression molding) and quantify how compositional variables translate into film performance: tensile strength, elongation at break (4–10%), water vapor transmission rate, thermal stability, and biodegradation kinetics. Highlighted case studies include the reinforcement of poly(vinyl alcohol) (PVA) with 7 wt% oxidized nanocellulose, yielding a >90% increase in tensile strength and a 50% reduction in water vapor transmission rate (WVTR), as well as pilot-scale extrusion of rice straw/polylactic acid (PLA) blends. We also assess techno-economic metrics and life-cycle impacts. Finally, we identify four priority research directions: harmonizing pretreatment protocols to reduce batch variability, scaling up nanocellulose extraction and film casting, improving marine-environment biodegradation, and integrating circular economy supply chains through regional collaboration and policy frameworks. Full article

In this study, an artificially simulated enhanced UV-B radiation treatment of 96 kJ/m²·d⁻¹ was applied with natural sunlight as the control. By observing changes in biological tissue damage, peroxidase (POD) enzyme activity, and hormone content, combined with transcriptome analysis and quantitative fluorescence PCR validation, this study preliminarily elucidated the physiological mechanisms of plant-specific peroxidase (POD) in responding to enhanced UV-B radiation stress. Enhanced UV-B treatment significantly inhibited biological tissue growth, particularly during the rapid growth stage. At this stage, the treatment exhibited higher malondialdehyde (MDA) content, indicating increased oxidative stress due to the accumulation of reactive oxygen species (ROS). Despite the inhibition in growth, the treatment showed improvements in the accumulation of organic nutrients as well as the contents of abscisic acid (ABA), salicylic acid (SA), and methyl jasmonate (MeJA). Additionally, an increase in POD activity and lignin content was observed in the treatment, especially during the middle period of the rapid growth period. Transcriptome analysis revealed that two POD multigene family members, LOC123198833 and LOC123225298, were significantly upregulated under enhanced UV-B radiation, which was further validated through qPCR. In general, enhanced UV-B radiation triggered a defence response in biological tissue by upregulating POD genes, which can effectively help to scavenge excess ROS. Full article

Fungal lytic polysaccharide monooxygenases (LPMOs) have revolutionized the field of biomass degradation by introducing an oxidative mechanism that complements traditional hydrolytic enzymes. These copper-dependent enzymes catalyze the cleavage of glycosidic bonds in recalcitrant polysaccharides such as cellulose, hemicellulose, and chitin, through the activation of molecular oxygen (O₂) or hydrogen peroxide (H₂O₂). Their catalytic versatility is intricately modulated by structural features, including the histidine brace active site, surface-binding loops, and, in some cases, appended carbohydrate-binding modules (CBMs). The oxidation pattern, whether at the C1, C4, or both positions, is dictated by subtle variations in loop architecture, amino acid microenvironments, and substrate interactions. LPMOs are embedded in a highly synergistic fungal enzymatic system, working alongside cellulases, hemicellulases, lignin-modifying enzymes, and oxidoreductases to enable efficient lignocellulose decomposition. Industrial applications of fungal LPMOs are rapidly expanding, with key roles in second-generation biofuels, biorefineries, textile processing, food and feed industries, and the development of sustainable biomaterials. Recent advances in genome mining, protein engineering, and heterologous expression are accelerating the discovery of novel LPMOs with improved functionalities. Understanding the balance between O₂- and H₂O₂-driven mechanisms remains critical for optimizing their catalytic efficiency while mitigating oxidative inactivation. As the demand for sustainable biotechnological solutions grows, this narrative review highlights how fungal LPMOs function as indispensable biocatalysts for the future of the Circular Bioeconomy and green industrial processes. Full article

Air pollution acts as a pervasive oxidative stressor, disrupting global crop production and ecosystem health through the overproduction of reactive oxygen species (ROS). Hazardous pollutants impair critical physiological processes—photosynthesis, respiration, and nutrient uptake—triggering oxidative damage and yield losses. This review synthesizes current knowledge on plant defense mechanisms, emphasizing the integration of enzymatic (SOD, POD, CAT, APX, GPX, GR) and non-enzymatic (polyphenols, glutathione, ascorbate, phytochelatins) antioxidant systems to scavenge ROS and maintain redox homeostasis. We highlight the pivotal roles of transcription factors (MYB, WRKY, NAC) in orchestrating stress-responsive gene networks, alongside MAPK and phytohormone signaling (salicylic acid, jasmonic acid, ethylene), in mitigating oxidative stress. Secondary metabolites (flavonoids, lignin, terpenoids) are examined as biochemical shields against ROS and pollutant toxicity, with evidence from transcriptomic and metabolomic studies revealing their biosynthetic regulation. Furthermore, we explore biotechnological strategies to enhance antioxidant capacity, including overexpression of ROS-scavenging genes (e.g., TaCAT3) and engineering of phenolic pathways. By addressing gaps in understanding combined stress responses, this review provides a roadmap for developing resilient crops through antioxidant-focused interventions, ensuring sustainability in polluted environments. Full article

Aromatic compounds are vital in both natural and synthetic chemistry, and they are traditionally sourced from non-renewable petrochemicals. However, plant biomass, particularly lignin, offers a renewable alternative source of aromatic compounds. Lignin, a complex polymer found in plant cell walls, is the largest renewable source of aromatic compounds, though its degradation remains challenging. Lignin can be chemically degraded through oxidation, acid hydrolysis or solvolysis. As an alternative, microorganisms, including fungi, could offer a sustainable alternative for breaking down lignin. The aromatic compounds released from lignin, by either microbial, chemical or enzymatic degradation, can be used by microorganisms to produce valuable compounds. Fungi possess unique enzymes capable of converting aromatic compounds derived from lignin or other sources into chemical building blocks that can be used in several industries. However, their aromatic metabolic pathways are poorly studied compared to bacterial systems. In the past, only a handful of genes and enzymes involved in the aromatic metabolic pathways had been identified. Recent advances in genomics, proteomics, and metabolic engineering are helping to reveal these metabolic pathways and identify the involved genes. This review highlights recent progress in understanding fungal aromatic metabolism, focusing on how Aspergillus niger converts plant-derived aromatic compounds into potentially useful products and the versatility of aromatic metabolism within the Aspergillus genus. Addressing the current knowledge gaps in terms of fungal pathways could unlock their potential for use in sustainable technologies, promoting eco-friendly production of chemical building blocks from renewable resources or bioremediation. Full article