Search Results (167)

Babassu (Attalea speciosa) is one of the most abundant palm species in the Brazilian Amazon and an important unconventional crop, playing a key socioeconomic role due to the commercial exploitation of its oil-rich almonds. However, approximately 90–93% of the fruit biomass—mainly mesocarp, epicarp, and endocarp—is generated as underutilized residue. This systematic review aims to analyze extraction methods, phytochemical composition, and antioxidant capacity of bioactive compounds derived from different babassu fractions. Following PRISMA guidelines, searches of five databases (Embase, ScienceDirect, Scopus, PubMed, and Web of Science) retrieved 410 records, of which 23 met the inclusion criteria. The results show that, although research has predominantly focused on the almond fraction, non-edible parts contain significant levels of phenolic compounds, flavonoids, phytosterols, and other bioactive metabolites with antioxidant properties. Green and non-thermal extraction technologies, such as ultrasound-assisted extraction (UAE), supercritical CO₂ extraction (SC-CO₂), and pressurized liquid extraction (PLE), demonstrated advantages in improving extraction efficiency while reducing solvent consumption and thermal degradation. Overall, the available evidence indicates that babassu residues represent a promising and still underexplored source of bioactive compounds. Their valorization may contribute to sustainable extraction strategies, waste reduction, and the development of value-added products within agricultural and bioeconomic systems. Full article

This study investigates the effect of 3-glycidoxypropyltrimethoxysilane (GPTMS) concentration on the mechanical, interfacial, and fracture behavior of epoxy/microfibrillated cellulose (MFC) composites derived from oil palm empty fruit bunch (OPEFB). GPTMS was incorporated at 1, 3, and 5 Phr to improve compatibility between hydrophilic MFC and the hydrophobic epoxy matrix. Mechanical testing revealed that GPTMS concentration significantly influenced composite performance in a concentration-dependent manner, with 1 Phr GPTMS providing the most balanced reinforcement. At this concentration, tensile strength increased by 14.5% from 32.88 ± 3.61 MPa to 37.65 ± 1.42 MPa, while flexural strength improved by 5.55% from 70.24 ± 5.30 MPa to 74.14 ± 4.10 MPa compared with the unmodified composite. Tensile modulus also increased from 2.07 ± 0.06 GPa to 2.21 ± 0.16 GPa, accompanied by improved flexural modulus from 2.39 ± 0.12 GPa to 2.47 ± 0.21 GPa. SEM analysis revealed that the optimized formulation promoted more uniform MFC dispersion, improved interfacial integrity, reduced void formation, and enhanced fracture resistance through tortuous crack propagation, localized radial crack branching, and matrix tearing. In contrast, higher GPTMS concentrations (3 and 5 Phr) reduced mechanical efficiency, with flexural strength declining to 65.27 ± 5.33 MPa and 66.16 ± 4.23 MPa, respectively, due to increased fiber pull-out, interfacial heterogeneity, and more continuous crack propagation. FTIR analysis suggested possible silane-related interfacial modifications consistent with GPTMS incorporation, although these findings are interpreted as supportive rather than definitive evidence of grafting. Overall, the results demonstrate that moderate GPTMS incorporation (1 Phr) is the optimum strategy for enhancing epoxy/MFC composite performance, offering a practical pathway for developing sustainable lightweight bio-based composites with balanced strength, stiffness, and fracture resistance. This research contributes to SDG 12 (Responsible Consumption and Production) by promoting sustainable utilization of oil palm biomass waste for advanced engineering materials. Full article

The transition toward a sustainable bioeconomy is increasingly recognised as a key pathway for resource efficiency and climate resilience in emerging economies. However, system-level analyses integrating biomass flows, governance structures, and actor dynamics remain limited, particularly in Sub-Saharan Africa. This study develops a systems-oriented analytical framework combining material flow assessment, stakeholder mapping, governance assessment, and innovation systems analysis to evaluate the structure, performance, and circularity of biomass systems in Ghana. The analysis focuses on six major biomass sectors: cocoa, cassava, maize, plantain, oil palm, and shea. The results show that Ghana generates substantial biomass resources, yet significant inefficiencies persist, with major residue streams such as cocoa pod husks (~9 million tonnes (Mt) annually) and cassava peels (2.6–3.8 million tonnes annually) remaining largely underutilised. Across sectors, residue utilisation rates remain low, while biomass leakage is driven by fragmented governance, weak coordination among actors, spatially dispersed production systems, and limited processing and technological capacity. Compared with more integrated biomass-based economies, Ghana remains at an early stage of circular transition, despite considerable potential for value addition and resource recovery. The study contributes a transferable systems-based analytical framework for diagnosing circularity gaps and system inefficiencies in data-constrained bioeconomy contexts. Strengthening institutional coordination, decentralised processing infrastructure, and innovation systems is identified as critical for advancing a more circular and inclusive bioeconomy in Ghana. Full article

The oil palm production chain generates coproducts whose sustainable valorization remains a challenge. This study tested the hypothesis that partial replacement of the conventional substrate with oil palm coproducts could maintain the productive performance of Zophobas atratus larvae and generate value-added biomass. Mesocarp fiber (MF), palm oil mill effluent (POME), and palm kernel cake (PKC) were characterized in terms of physicochemical composition, carotenoids, and antioxidant capacity and examined as partial substitutes for wheat bran in six diets for Z. atratus. PKC demonstrated higher levels of protein (15.27%), carbohydrates (65.68%), neutral detergent fiber (68.35%), acid detergent fiber (37.70%), and saturated fatty acids (83.06%) and greater antioxidant capacity associated with phenolic compounds. MF showed the highest carotenoid content (138.27 mg/100 g), and POME had the highest lipid content (17.69%). Diet containing 50% PKC-supplemented wheat bran promoted higher feed conversion efficiency (78.99%), lower feed conversion ratio (0.90%), and higher larval protein content (39.14%) and maintained performance similar to that of the control. Larvae fed on 50% MF exhibited carotenoid bioaccumulation, with >190% increase compared with the control. Although the coproducts demonstrate potential as substrates, mortality restricts their technical feasibility. Their use depends on an adequate protein/energy balance and the digestibility of the fibrous fraction for strategic supplementation. Full article

Spoilage date palm fruits are produced in large quantities and represent an underutilized agrowaste resource. Their high sugar content and balanced nutrient composition make them promising candidates for microbial bioprocessing. This study explored their potential as a low-cost substrate for Talaromyces atroroseus QA2602 (PZ091940) to simultaneously produce biodiesel grade lipids, natural pigments, and fungal chitosan within an integrated biorefinery approach. Spoiled date fruits were chemically characterized and applied at varying concentrations to cultivate T. atroroseus QA2602 (PZ091940). Thermal and thermo-chemical pretreatments were tested to enhance sugar availability. Lipid accumulation, fatty acid methyl esters (FAMEs) profiles, pigment production, and pigment stability were assessed. Biodiesel quality was estimated from FAME composition. De-oiled fungal biomass wastes were further processed to extract and characterize chitosan, and pigment–chitosan composites were evaluated for antioxidant activity. Optimal lipid and pigment production by T. atroroseus occurred at moderate concentration of spoiled date fruit substrate used in the culture medium, while dilute acid pretreatment of spoiled date fruits at high temperature resulted in the highest reducing sugar release from the substrate, which subsequently enhanced fungal biomass formation. The resulting C16–C18 rich oil displayed fuel properties consistent with high quality biodiesel. Pigments exhibited strong pH and thermal stability, along with potent antioxidant activity. De-oiled biomass produced chitosan with a high degree of deacetylation, and the pigment–chitosan composite showed enhanced antioxidant capacity. Rotted date fruits provide an effective, sustainable feedstock enabling the co-production of biodiesel, pigments, and chitosan by Talaromyces atroroseus QA2602 (PZ091940), supporting their integration into circular bioeconomy frameworks. Full article

The growing demand for sustainable, decentralized energy solutions has heightened interest in biomass-based technologies for rural applications. In Mexico, the expansion of oil palm cultivation in humid tropical regions has generated large quantities of agro-industrial residues that remain largely underutilized. This review analyzes the potential of oil palm residues as feedstock for small-scale thermochemical conversion, with a particular focus on gasifier stove technologies. Key residues, including empty fruit bunches, mesocarp fiber, and palm kernel shells, exhibit favorable physicochemical properties, including adequate calorific values and high volatile matter content, which support their suitability for gasification processes. However, challenges related to moisture content, ash composition, and tar formation may affect system performance and require appropriate pre-treatment and operational control. Gasifier stoves, especially fixed-bed and top-lit updraft (TLUD) configurations, represent a viable solution for decentralized energy generation in rural settings, improving combustion efficiency and reducing emissions compared to traditional biomass use. Despite their potential, current bioenergy policies in Mexico remain primarily focused on large-scale biofuel production, limiting the deployment of small-scale technologies. Overall, oil palm residues constitute a promising feedstock for gasifier stove applications, although their successful implementation depends on feedstock optimization, appropriate stove design, and the development of policy frameworks that support decentralized bioenergy systems. Full article

This study reports the valorization of oil palm empty fruit bunches into cellulose nanocrystals (CNCs) for the removal of the chemical oxygen demand (COD) from industrial wastewater generated by the same processing sector. Cellulose I_β was first isolated through sequential bleaching, delignification, and mercerization, and two hydrolysis routes were evaluated to obtain CNCs: a concentrated acid route (60% v/v H₂SO₄, 50 °C, 60 min) for CNCs-1 and a low-acid, long-duration route (1% v/v H₂SO₄, 80 °C, 12 h) for CNCs-2. Rietveld refinement of the X-ray diffractograms confirmed the polymorphic transition, assigning cellulose I_β to the intermediate materials and cellulose II to the CNC samples, with crystallite sizes of 4.99 nm for CNCs-1 and 5.43 nm for CNCs-2. Attenuated Total Reflectance–Fourier Transform Infrared (ATR-FTIR) spectroscopy analysis showed the progressive removal of lignin and hemicellulose and supported the cellulose I_β to II transition through changes in hydroxyl bonding and crystallinity-related bands. Preliminary adsorption tests showed better COD removal with CNCs-2, which were therefore selected for optimization using a Box–Behnken design with the adsorbent mass, pH, and contact time as variables. The quadratic model was significant (R² = 0.9675; predicted R² = 0.8908), and the maximum COD removal reached 91.47%, decreasing the COD concentration from 2459.0 to 209.85 mg L⁻¹ under the optimum conditions of 0.09 g CNCs-2, pH 3, and 20 min. These results highlight cellulose II nanocrystals derived from oil palm waste as a promising and scalable adsorbent for industrial wastewater treatment. Full article

The global push for energy decarbonization has increased interest in hydrogen as a clean energy carrier. Biohydrogen from agricultural residues is a promising pathway for countries with strong agro-industrial sectors. This study evaluates the technical, economic, and environmental feasibility of hydrogen production from palm oil rachis in two post-conflict regions of Colombia: a large-scale facility in Bolívar and a small-scale plant in Santander. The assessment integrates Aspen Plus^® (version 14) simulations using the NRTL thermodynamic model, an attributional gate-to-gate Life Cycle Assessment (LCA) with ReCiPe Midpoint (H), and a techno-economic analysis. The simulated process includes biomass drying, decomposition, steam gasification, syngas cleaning, and methane reforming. A key technical finding was the non-linear relationship between feedstock composition and process yield. Although Santander’s biomass had a higher hydrogen content (9.42% vs. 6.58%), Bolívar achieved a much higher conversion efficiency (0.198 kg H₂/kg biomass) and produced over seven times more hydrogen while processing only 5.8 times more biomass. Environmental results showed clear advantages for Bolívar, which presented lower impacts across most categories compared to Santander and the fossil-based hydrogen benchmark. Bolívar achieved a Global Warming Potential of 2.47 kg CO₂ eq/kg H₂, far below the 15.03 kg CO₂ eq/kg H₂ of Santander, and showed favorable performance in particulate matter formation, acidification, and fossil resource scarcity. Economically, Bolívar was viable, with a Net Present Value of USD 25.01 million, a Benefit–Cost Ratio of 3.29, and a discounted payback period of 4.54 years. Santander was economically unfeasible under all conditions. Hydrogen production from palm rachis is technically feasible, environmentally beneficial, and economically viable when biomass availability and process integration are adequate, as illustrated by the Bolívar case. Full article

This study analyzes the valorization of oil palm biomass residues within the framework of industrial symbiosis (IS), emphasizing their role in circular economy strategies and sustainable industrial development. Through a systematic literature review and snowball sampling, 156 articles indexed in Scopus and Web of Science were examined, classifying evidence by country, type of residue, derived products, economic sector (ISIC Rev. 4), and technological approach. The results show a strong geographical concentration of IS experiences in Asia, particularly Malaysia, Indonesia, and Thailand, where residues such as empty fruit bunches (EFB), palm kernel shells (PKS), oil palm mesocarp fibers, palm oil mill effluent (POME), and oil palm trunks (OPT) are integrated into processes for bioenergy, biochemicals, composite materials, construction products, biochar, and bioplastics. In contrast, applications in Latin America and Africa remain incipient, with high potential but limited industrial implementation due to infrastructural and regulatory gaps. Technological trends point toward thermo-chemical and biological conversion routes (pyrolysis, gasification, hydrothermal carbonization, anaerobic digestion), development of advanced materials and catalysts, and the emergence of integrated biorefinery models supported by computational optimization tools. The analysis highlights that palm biomass residues, far from being an environmental liability, constitute strategic resources for low-carbon value chains. However, scaling IS initiatives requires clear public policies, economic incentives, and stronger coordination between industry, government, and academia. The study provides a structured overview of current knowledge, identifies research gaps, and outlines future directions for leveraging oil palm residues as a key input for sustainable IS. Full article

In Colombia, two main palm varieties, Elaeis guineensis and Elaeis oleifera, are cultivated for the production of crude palm oil (CPO). During the CPO extraction process, several residues are generated, including empty fruit bunches (EFB), nut fiber, palm kernel cake, and Palm Oil Mill Effluent (POME), among others. These residues are commonly used for biochar and compost production to improve soil quality, for biogas generation, and for energy production through biomass combustion. Because the rachis is rich in lignocellulosic material and exhibits physicochemical properties suitable for thermochemical processes, it is proposed as a feedstock for hydrogen synthesis through gasification. In this study, a techno-economic analysis and an FP²O resilience assessment were conducted for a hydrogen production process based on the utilization of palm rachis generated in María la Baja, northern Colombia. The economic evaluation results indicate that the capital investment required for plant installation is USD 10,111,255.23. The economic indicators show favorable performance with a Return on Investment (ROI) of 58.83%, a Net Present Value (NPV) of USD 25.01 million, a B/C ratio of 3.29, and a Discounted Payback Period (DPBP) of 4.54 years. Regarding techno-economic resilience, critical values for processing capacity, selling price, and feedstock cost were identified through parameter variation. The findings suggest that the process has opportunities for improvement, since small changes in these variables could significantly reduce its resilience. Finally, an On-Stream efficiency of 39.65% at the break-even point was obtained, indicating that the process can operate at less than 50% of its maximum capacity while still generating significant profits. Full article

Residues generated during fruit processing constitute an abundant and underutilized biomass rich in bioactive compounds, pigments, structural polysaccharides, lipids, and fermentable carbohydrates. Although their potential for biorefinery applications is widely recognized, existing studies are often fragmented, focusing on isolated products, which limits a comprehensive understanding of integrated valorization strategies. To address this gap, this study presents an integrative review supported by bibliometric analysis to identify global research trends, dominant technological pathways, and key challenges associated with the use of fruit residues in biorefineries. The review covers technologies for extracting phenolic compounds, essential oils, pigments, and structural fibers, as well as lipid recovery, enzyme production, and biochemical routes for bioethanol, biohydrogen, and biogas generation. The review reveals that emerging technologies, such as pressurized fluid extraction, microwave-assisted extraction, and ultrasound-assisted extraction, enable efficient recovery of antioxidant compounds, high-purity pectin, and fermentable sugars, particularly when applied in sequential and integrated processing schemes. Bioethanol production is the most extensively investigated route, with yields strongly dependent on biomass composition and pretreatment strategies, identifying banana, cashew, apple, mango, coconut, and palm residues as promising feedstocks. In addition, biohydrogen production via dark fermentation and anaerobic digestion for biogas generation shows high technical feasibility, especially when integrated with upstream extraction steps. Overall, integrated valorization of fruit residues emerges as a key strategy to enhance economic performance and environmental sustainability in agro-industrial systems. Full article

Indonesia faces growing pressure to strengthen waste management while expanding renewable energy generation, particularly from high-moisture biomass such as palm oil mill effluent (POME) and the organic fraction of municipal solid waste (OFMSW). Anaerobic digestion technology (ADT) is technically suitable for both feedstocks; however, its deployment depends on broader operational, financial, social, and institutional conditions. This study evaluates ADT readiness for biomass waste-to-energy (BWTE) development in Indonesia using a multistakeholder Japanese Technology Readiness Assessment (J-TRA) framework. The results and discussion are supported by a literature review, secondary data analysis, and interviews with government agencies, industry actors, financiers, non-governmental organizations, and researchers. The results reveal a clear divergence in readiness outcomes. POME-based ADT reaches Technology Readiness Levels (TRLs) of 6–8, supported by a stable and homogeneous feedstock supply, established industrial operations, and corporate incentives to mitigate methane emissions. Key remaining constraints relate to high capital costs for smaller mills, low electricity purchase tariffs, and competing export incentives for untreated POME. In contrast, OFMSW-based ADT remains at TRL 2–4, constrained by inconsistent waste segregation, insufficient operation and maintenance capacity, limited municipal budgets, residential safety concerns, and fragmented governance across waste and energy institutions. Across both cases, readiness is shaped by five interacting forces. The first three are technical: feedstock characteristics, operations and maintenance (O&M) capability, and financial certainty. The remaining two are enabling conditions: social acceptance and institutional coordination. This study concludes that Indonesia’s BWTE transition requires integrated technological, behavioral, and policy interventions, supported by further research on hybrid valorization pathways and context-specific life-cycle and cost analyses. Full article

The rapid growth of the palm oil industry produces large amounts of palm oil mill effluent (POME), which contains high organic content and is challenging to treat using conventional ponding systems. These traditional systems often fail to meet discharge standards for biochemical oxygen demand (BOD) and chemical oxygen demand (COD). This study tested anaerobic biofilm reactors enhanced with biochips and chemically treated palm oil fuel ash (TPOFA) to improve POME degradation and biogas production. Two 3 L reactors were operated at the same feed-to-microorganism (F/M) ratio: a control (C) and a combination of both (P + B). Biochips helped microbes attach and form biofilms, while TPOFA acted as an adsorbent, creating better conditions for anaerobic breakdown. The P + B reactor outperformed others, achieving over 95% COD removal, high microbial biomass (MLVSS: 24,500 mg/L), and the highest biogas yield at 917 mL per day. Microbial analysis showed dominant groups, including phyla groups of Halobacterota, Bacteroidota, and Firmicutes. Class Methanosarcina in archaeal phylum of Halobaterota was key in converting acetate to methane. Bacteroidota primarily aided organic matter breakdown and nutrient removal, while Firmicutes supported hydrolysis and electron transfer. Less abundant Desulfobacterota also helped by interacting with methanogenic archaea. Overall, combining biochips with TPOFA in anaerobic biofilm reactors offers an effective, sustainable method for treating POME and recovering renewable energy through biogas. Full article

The agro-industrial sector in Indonesia produces significant amounts of nutrient-rich waste and wastewater, which pose environmental risks but also present opportunities for valorization within a circular bioeconomy. Microalgae provide a promising solution for transforming these wastewaters into valuable products such as biomass for bioenergy, biofertilizers, or pigments, all while helping to remediate pollutants. This review synthesizes current knowledge on the use of major Indonesian agro-industrial effluents, specifically palm oil mill effluent (POME), byproducts from cassava and sugarcane, and soybean residues, as substrates for microalgal biomass production and cultivation. Furthermore, various cultivation strategies are summarized, including autotrophic, heterotrophic, and mixotrophic methods, as well as the use of open ponds, photobioreactors, and hybrid systems. These cultivation processes influence biomass yield, metabolite production, and nutrient removal. Reported studies indicate high removal efficiencies for organic loads, nitrogen, and phosphorus, along with considerable production of lipids, proteins, pigments, and biofuels. Yet, effluent pretreatment, concerns about heavy metal and pathogen contamination, high downstream processing costs, and biosafety issues remains as challenges. Nonetheless, the application of microalgal cultivation into Indonesia’s agro-industrial wastes treatment can provide the dual benefits of waste mitigation and resource recovery, helping to advance climate goals and promote rural development. Full article

Vegetable oil is a carbon-rich resource applied in liquid fermentation for compounds of interest. In this study, olive oil demonstrated the best effect on improving the liquid fermentation of a medicinal fungus Poria cocos (Schw.) Wolf compared to rapeseed, coix seed, palm, peanut, and soybean oils. When 2% (v/v) olive oil was initially added to the medium, biomass reached a maximum value of 11.7 g L⁻¹, presenting a 3.1-fold enhancement compared to the blank control. Due to the stronger basal metabolism, the total triterpenoid yields also exhibited a significant improvement of ~3.4-fold, reaching 0.68 g L⁻¹. Spectrophotometry, along with fluorescence and chemiluminescence probe assays, demonstrated that olive oil affected the fungus membrane fluidity and level of reactive oxygen species and nitrogen oxide in mycelium cells. Transcriptome analysis confirmed that olive oil was used as a carbon resource and elicitor that affected mycelia growth, which simultaneously produced some slight effects on metabolic processes, including fatty acid degradation, TCA cycle, and glycolysis/gluconeogenesis. Our study represents an attractive strategy for the industrial fermentation of filamentous fungi. Full article