Search Results (224)

The placement of Daphne genkwa has long been controversial, as its intermediate morphological traits blur the boundary between Daphne and Wikstroemia. To address this challenge, we adopted a chemotaxonomic approach, integrating flavonoid contents with ecological indicators, as an independent line of evidence complementing morphology and molecular data. Using UPLC-UV, six flavonoids were quantified from 16 Korean populations representing six taxa. Multivariate analyses clearly distinguished Daphne and Wikstroemia, with D. genkwa and W. ganpi forming closely related but separate clades. Ecological factors such as precipitation and canopy openness significantly affected flavonoid levels, particularly luteolin 7-O-glucoside and yuankanin. However, the diagnostic flavonoid fingerprints remained consistent across habitats. This study demonstrates that integrating chemical and environmental perspectives can strengthen taxonomic frameworks and support both classification and chemotaxonomic evidence in Thymelaeaceae, offering a methodological basis for future comparative studies across related plant families. Full article

The paper finds optimal power flows and optimal placement of wind power plants (WPPs), static var compensators (SVCs), and thyristor-controlled series capacitors (TCSCs) in the IEEE 30-bus transmission power network by applying three high-performance algorithms, such as the equilibrium optimizer (EO), the Coot optimization algorithm (COOT), and the marine predators algorithm (MPSA). The three algorithms are run for the system without any added electric components and with three single objectives, including active power losses, total fuel cost, and total voltage deviation, for comparison with other previous algorithms. The three algorithms can reach better results than many algorithms and suffer worse results than a few algorithms. EO is more effective than MPSA and COOT in all cases. For simulation cases with SVCs, TCSCs, and WPPs, the losses are significantly reduced compared to the base case. The power loss of the base case is 3.066 MW, and the best loss is 2.869 MW for two cases with two SVCs and one TCSC. When applying the obtained solution and optimizing the placement of one, two, and three WPPs, the power loss is, respectively, 2.053, 1.512, and 1.112 MW. By optimizing two SVCs, one TCSC, and WPPs simultaneously, the power loss is, respectively, 2.041, 1.508, and 1.093 MW for one, two, and three WPPs. So, the optimal placement of TCSCs, SVCs, and WPPs can result in high benefits for power systems. Full article

This study addresses the problem of minimizing cable costs in Standardized Photovoltaic Power Units (SPPUs) by proposing an integrated inverter placement optimization framework. A high-precision economic model is first established to quantify the cost of both direct current (DC) and low-voltage alternating-current (LV-AC) cables as a function of inverter location. To improve solution accuracy and efficiency, an enhanced particle swarm optimization algorithm, termed the Adaptive Classification Method PSO (ACM-PSO), is developed, featuring population classification strategies as well as adaptive inertia weighting and neighborhood learning strategies. The optimization process incorporates hierarchical trench planning, dynamic combiner-unit partitioning, and multi-scheme layout generation, ensuring that both spatial and economic factors are systematically considered. A case study on Unit 19 of a 350 MW flat-ground PV plant in Xinjiang, China, demonstrates that the proposed method reduces total cable investment to CNY 292,945, achieving a cost saving of 2.3–3.8% compared with conventional layouts. These results confirm not only the methodological innovation of ACM-PSO for constrained nonlinear PV layout problems, but also its practical generalizability, offering a replicable and scalable design paradigm for large-scale PV plants. Full article

To better understand the mitochondrial genome evolution within the genus Pedicularis, we investigated two representative species, Pedicularis kansuensis and Pedicularis chinensis. We sequenced and assembled the mitochondrial genomes of two Pedicularis species, P. kansuensis and P. chinensis, using Nanopore technology. Both genomes showed irregular morphological characteristics, with P. chinensis measuring 225,612 bp and P. kansuensis 273,598 bp, and GC (guanine and cytosine) contents of 44.42% and 44.29%, respectively. Each genome encodes 36 unique protein-coding genes, 3 rRNA genes, and varying numbers of tRNA genes (P. chinensis: 20; P. kansuensis: 19). Codon usage analysis revealed distinct preferences, while repeat sequence analysis identified significant differences in SSRs, tandem repeats, and dispersed repeats between the two genomes. Structural analyses highlighted genome recombination facilitated by repeat sequences. Phylogenetic analysis confirmed the placement of Pedicularis within Orobanchaceae, clustering P. kansuensis and P. chinensis with Castilleja paramensis and other genera in the family, thus resolving longstanding taxonomic uncertainties regarding their relationship with Scrophulariaceae. RNA editing events were predominantly C-to-U, ccmB and nad4 exhibiting the highest editing frequencies. Synteny analysis revealed frequent rearrangements, underscoring the dynamic evolution of Pedicularis mitochondrial genomes. These findings provide valuable insights into the structure, function, and evolution of mitochondrial genomes in parasitic plants. Full article

In forest land reclamation, revegetation efforts often focus on restoring tree composition, while the recovery of the understory vegetation community is typically left to natural regeneration. This regeneration relies mainly on wind-dispersed seeds, ingress from adjacent intact forests, or seed emergence from stockpiled surface soils. We examined the growth and survival of nursery-propagated, field-planted native herbaceous forbs on a reclaimed industrial site where topsoil placement depth was varied to manipulate soil nutrient availability and levels of competing vegetation. A pre-emergent herbicide was applied to half of the standard topsoil plots to assess the impact of ruderal vegetation competition. We addressed the following two questions: (1) How does placed topsoil depth affect the growth and survival of native forbs? We hypothesized that deeper topsoil (higher nutrient availability) would enhance growth but reduce survival due to increased competition. (2) Does competing ruderal vegetation negatively affect survival and/or growth? We hypothesized that competition would reduce growth in all species, but that Canada goldenrod (Solidago canadensis L.) would show greater resilience due to its pioneering nature. The results showed that S. canadensis exhibited consistently high growth and survival across all topsoil treatments, confirming its competitive advantage. Showy aster (Eurybia conspicua (Lindl.) G.L.Nesom) survival remained high during no-topsoil and shallow-topsoil treatments, with reductions under standard-depth topsoil linked to increased competition. Spreading dogbane (Apocynum androsaemifolium L.) survival varied but tended to be higher in no-topsoil and shallow-topsoil conditions. These findings suggest that certain native forbs can thrive across a range of soil conditions, and that Canada goldenrod, in particular, is a strong candidate for revegetation programs where competition from ruderal vegetation is a concern. Full article

Manure application may improve plant growth, yield, and ecological sustainability. This study investigates optimized organic fertilizer application methods for enhancing buckwheat (Fagopyrum esculentum) productivity in semi-arid conditions. Treatments include broadcasting (Br) and subsurface banding (Ba) of poultry (PM) and cattle (CM) manure and foliar spraying (S) of manure extracts (1:5 and 1:10 ratios), urea fertilizer (UF), and a control. Subsurface-banded poultry manure (BaPM) maximized chlorophyll b (4.0 µg/mL), carotenoids (2.30 µmol/mL), anthocyanin (0.02 µmol/mL), leaf area index (2.03), seed nitrogen (3.4%), and spikes per plant (17). BaPM achieved the highest seed yield (646 kg/ha), comparable to BrPM, BaCM, and SPM(1:5). The maximum seed phosphorus content (0.43%) was observed in the BaPM, BrPM, and SCM(1:10) treatments. Dry matter peaked under UF (4870 kg/ha) and BaPM (4641 kg/ha). Banding placement improved nutrient uptake by enhancing root zone retention, while foliar poultry extract (1:5) mitigated phosphorus deficiency. These findings demonstrate that integrating certain manure types with targeted application methods—particularly subsurface banding of poultry manure—optimizes nutrient use efficiency, crop performance, and environmental sustainability in buckwheat cultivation. Full article

Improving the operational speed of cabbage transplanters is essential for precision seed-ling placement and labor efficiency. In South Korea, manual cabbage transplanting can demand up to 184 person-hours per hectare, often leading to delays during peak periods due to labor shortages. Moreover, the environmental urgency to reduce plastic waste has accelerated the adoption of biodegradable pots in mechanized systems, supporting global sustainable development goals. This study aimed to determine optimal working conditions for a 1.54 kW semi-automatic single-row cabbage transplanter designed for biodegradable pots. The cam-follower-based planting mechanism was analyzed to identify ideal forward and rotational speeds, while evaluating power consumption and seedling placement quality. The mechanism includes a crank-driven four-bar linkage, with an added restoring spring for enhanced motion stability. A total of nine simulation trials were conducted across forward speeds of 250, 300, and 350 mm/s and planting unit speeds of 40, 50, and 60 rpm. Simulation and experimental results confirmed that a forward velocity of 300 mm/s and crank speed of 60 rpm produced optimal outcomes, achieving a vertical hopper displacement of 280 mm, minimal soil disturbance (2186.95 ± 2.27 mm²), upright seedling alignment, and the lowest power usage (17.42 ± 1.21 W). Comparative analysis showed that under the optimal condition, the characteristic coefficient λ = 1 minimized misalignment and power loss. These results support scalable and energy-efficient transplanting systems suitable for smallholder and mid-sized farms, offering an environmentally sustainable solution. Full article

The placement of hydraulic elements in existing pool-type fishways to make them more suitable for Cyprinid fish is an issue of increasing interest in fishway research. Hydrodynamic characteristics and fish behavior at the representative pool of the fishway with bottom orifices and notches were assessed at the Dagdelen hydropower plant in the Ceyhan River Basin, Türkiye. Three-dimensional velocity measurements were taken in the pool of the fishway using an Acoustic Doppler velocimeter. The measurements were taken with and without a brush block at two different vertical distances from the bottom, which were below and above the level of bristles tips. A computational fluid dynamics (CFD) analysis was conducted for the studied fishway. The numerical model utilized Large Eddy Simulation (LES) combined with the Darcy–Forchheimer law, wherein brush blocks were represented as homogenous porous media. Our results revealed that the relative submergence of bristles in the brush block plays a very important role in velocity and Reynolds shear stress (RSS) distributions. After the placement of the submerged brush block, flow velocity and the lateral RSS component were reduced, and a resting area was created behind the brush block below the bristles’ tips. Fish movements in the pool were recorded by underwater cameras under real-time operation conditions. The heatmap analysis, which is a 2-dimensional fish spatial presence visualization technique for a specific time period, showed that Capoeta damascina avoided the areas with high turbulent fluctuations during the tests, and 61.5% of the fish presence intensity was found to be in the low Reynolds shear regions in the pool. This provides a clear case for the real-world ecological benefits of retrofitting existing pool-weir fishways with such flexible hydraulic elements. Full article

Neocosmospora (Nectriaceae) is a globally distributed fungal genus, traditionally recognized as a group of plant pathogens, with most members known to cause severe plant diseases. However, recent studies have demonstrated that many of these fungi can also colonize plants endophytically, with certain strains capable of promoting plant growth and stimulating the production of secondary metabolites. In this study, 13 strains of Neocosmospora were isolated from the stems and leaves of Dracaena cambodiana and D. lourei in Yunnan Province, China. To clarify the taxonomic placement of these strains, morphological examination and multi-gene (ITS, nrLSU, tef1, rpb1, and rpb2) phylogenetic analyses were performed. Based on morphological and phylogenetic evidence, four new species are introduced and described here: N. hypertrophia, N. kunmingense, N. rugosa, and N. simplicillium. This study expands our understanding of the fungal diversity associated with Dracaena, provides essential data for the taxonomy of Neocosmospora, and serves as a resource for the future development and utilization of Neocosmospora endophytes. Full article

This study presents an integrative investigation of four rare and threatened plant species—Taraxacum kok-saghyz L.E. Rodin, Astragalus rubtzovii Boriss., Schmalhausenia nidulans (Regel) Petr., and Rheum wittrockii Lundstr.—native to the Ile Alatau and Ketmen ridges of the Northern Tian Shan in Kazakhstan. Combining chloroplast genome sequencing, geobotanical surveys, and anatomical and population structure analyses, we aimed to assess the ecological adaptation, genetic distinctiveness, and conservation status of these species. Field surveys revealed that population structures varied across species, with T. kok-saghyz and S. nidulans dominated by mature vegetative and generative individuals, while A. rubtzovii and R. wittrockii exhibited stable age spectra marked by reproductive maturity and ongoing recruitment. Chloroplast genome assemblies revealed characteristic patterns of plastid evolution, including structural conservation in S. nidulans and R. wittrockii, and a reduced inverted repeat region in A. rubtzovii, consistent with its placement in the IR-lacking clade of Fabaceae. Morphological and anatomical traits reflected habitat-specific adaptations such as tomentose surfaces, thickened epidermis, and efficient vascular systems. Despite these adaptations, anthropogenic pressures including overgrazing and habitat degradation pose significant risks to population viability. Our findings underscore the need for targeted conservation measures, continuous monitoring, and habitat management to ensure the long-term survival of these ecologically and genetically valuable endemic species. Full article

Xylosalsola chiwensis (Popov) Akhani & Roalson is listed in the Red Data Book of Kazakhstan as a rare species with a limited distribution, occurring in small populations in Kazakhstan, Uzbekistan, and Turkmenistan. The aim of this study is to deepen the understanding of the ecological conditions of its habitats, the floristic composition of its associated plant communities, the species’ morphological and anatomical characteristics, and its molecular phylogeny, as well as to identify the main threats to its survival. The ecological conditions of the X. chiwensis habitats include coastal sandy plains and the slopes of chinks and denudation plains with gray–brown desert soils and bozyngens on the Mangyshlak Peninsula and the Ustyurt Plateau at altitudes ranging from −3 to 270 m above sea level. The species is capable of surviving in arid conditions (less than 100 mm of annual precipitation) and under extreme temperatures (air temperatures exceeding 45 °C and soil surface temperatures above 65 °C). In X. chiwensis communities, we recorded 53 species of vascular plants. Anthropogenic factors associated with livestock grazing, industrial disturbances, and off-road vehicle traffic along an unregulated network of dirt roads have been identified as contributing to population decline and the potential extinction of the species under conditions of unsustainable land use. The morphometric traits of X. chiwensis could be used for taxonomic analysis and for identifying diagnostic morphological characteristics to distinguish between species of Xylosalsola. The most taxonomically valuable characteristics include the fruit diameter (with wings) and the cone-shaped structure length, as they differ consistently between species and exhibit relatively low variability. Anatomical adaptations to arid conditions were observed, including a well-developed hypodermis, which is indicative of a water-conserving strategy. The moderate photosynthetic activity, reflected by a thinner palisade mesophyll layer, may be associated with reduced photosynthetic intensity, which is compensated for through structural mechanisms for water conservation. The flow cytometry analysis revealed a genome size of 2.483 ± 0.191 pg (2n/4x = 18), and the phylogenetic analysis confirmed the placement of X. chiwensis within the tribe Salsoleae of the subfamily Salsoloideae, supporting its taxonomic distinctness. To support the conservation of this rare species, measures are proposed to expand the area of the Ustyurt Nature Reserve through the establishment of cluster sites. Full article

Integrating variable renewable energy sources such as solar power into existing power grids presents major planning and reliability challenges. This study introduces an approach to optimize the placement of solar plants and allocation of storage in grids with high share of these variable energy sources by using a simulation framework that captures system-wide emergent behaviors. Unlike traditional engineering models focused on detailed component-level dynamics, a modified ORNL-PSERC-Alaska model based on self-organized criticality is used to reproduce the statistical features of blackouts, including cascading failures and long-range correlations. A distinctive feature of this approach is the explicit inclusion of key ingredients that shape these statistics, such as the transmission grid structure, generation and consumer buses, power flow balance, periodic dispatches, system failures, secular demand growth, demand fluctuations, and variability of renewable energy sources. When applied to the Balearic Islands grid, this method identifies generation and storage layouts that minimize storage requirements while maintaining reliability levels comparable to conventional power systems. The results offer a complementary systems-level perspective for planning resilient and efficient renewable energy integration. Full article

This study describes the first complete chloroplast genome of Ranunculus cf. penicillatus and provides new insights into the genetic composition and evolutionary relationships of the Ranunculus genus. The genome was assembled and characterized using high-throughput sequencing technologies, revealing a circular structure encompassing 158,313 base pairs. Comparative analysis with the chloroplast genomes of related species within the Ranunculus genus highlights notable variations in structural organization, which can elucidate potential adaptive evolutionary mechanisms. Phylogenetic analyses conducted using the maximum likelihood approach resulted in the placement of Ranunculus cf. penicillatus within a well-defined clade, revealing its relationship with other taxa. This study not only enriches the existing plastid genomic data of the genus Ranunculus but also serves as an additional resource for future studies on the phylogenetics, systematics, and conservation biology of this diverse group of aquatic plants. The findings highlight the importance of complete chloroplast genomes in the Ranunculus section Batrachium, an evolutionarily young group of aquatic plants, for understanding plant diversity and evolution. The genome can be accessed on GenBank with the accession number PV690257. Full article

With the large-scale global deployment of photovoltaics (PV), traditional monitoring technologies face challenges such as wiring difficulties, high energy consumption, and high maintenance costs in remote or complex terrains, which limit long-term environmental sensing. Therefore, energy-harvesting systems are crucial for the intelligent operation of photovoltaic systems; however, their deployment depends on the accurate mapping of wind energy fields and solar irradiance fields. This study proposes a multi-scale simulation method based on computational fluid dynamics (CFD) to optimize the placement of energy-harvesting systems in photovoltaic power plants. By integrating wind and irradiance distribution analysis, the spatial characteristics of airflow and solar radiation are mapped to identify high-efficiency zones for energy harvesting. The results indicate that the top of the photovoltaic panel exhibits a higher wind speed and reflected irradiance, providing the optimal location for an energy-harvesting system. The proposed layout strategy improves overall energy capture efficiency, enhances sensor deployment effectiveness, and supports intelligent, maintenance-free monitoring systems. This research not only provides theoretical guidance for the design of energy-harvesting systems in PV stations but also offers a scalable method applicable to various geographic scenarios, contributing to the advancement of smart and self-powered energy systems. Full article

The genus Xanthomonas (family Xanthomonadaceae) comprises 39 validly published species and is associated with a broad host range, infecting hundreds of monocot and dicot plants worldwide. While many Xanthomonas species are notorious for causing leaf spot and blight diseases in major agricultural crops, less attention has been given to their impact on ornamental plants. In Hawaii and other key production regions, xanthomonads have posed persistent threats to popular ornamentals in the Araceae and Araliaceae families. This review synthesizes the evolving phylogenetic and taxonomic framework of Xanthomonas strains isolated from Araceae and Araliaceae, highlighting recent advances enabled by multilocus sequence analysis and whole genome sequencing. We discuss the reclassification of key pathovars, unresolved phylogenetic placements, and the challenges of pathovar delineation within these plant families. Additionally, we examine current knowledge of molecular determinants of pathogenicity, including gene clusters involved in exopolysaccharide and lipopolysaccharide biosynthesis, flagellar assembly, cell-wall-degrading enzymes, and secretion systems (types II, III, and VI). Comparative genomics and functional studies reveal that significant gaps remain in our understanding of the genetic basis of host adaptation and virulence in these xanthomonads. Addressing these knowledge gaps will be crucial for developing effective diagnostics and management strategies for bacterial diseases in ornamental crops. Full article