Search Results (81)

Among diverse industrial wastes, antibiotic fermentation residues containing high concentrations of nosiheptide pose significant environmental and health risks. This study demonstrates that black soldier fly larvae (BSFL) can effectively degrade the nosiheptide residues within this fermentation matrix when blended with potato peel waste. Optimal degradation efficiency was achieved at a dry weight ratio of 3:5 (antibiotic fermentation residue to potato peel waste), yielding a 40.02% material reduction, an 8.63% bioconversion rate, and a 55.74% nosiheptide degradation rate. Further optimization of the larva-to-feed ratio enhanced nosiheptide degradation to 58.21%. Following 48 h of gut emptying period, no detectable nosiheptide remained within the tissues of the treated BSFL. The harvested larvae demonstrated high nutritional value, with crude protein and crude fat contents reaching up to 35.64% and 32.65%, respectively. The larvae also contained a comprehensive profile of essential amino acids, with the glutamic acid content exceeding 3%, which enhances feed palatability. Highly concentrated antibiotic treatments significantly increased the relative abundance of Bacteroidetes within the BSFL gut microbiota, with Dysgonomonas emerging as the dominant genus. This study highlights a novel strategy for degrading residual nosiheptide and converting waste into a valuable protein source, offering an eco-friendly solution for industrial waste management. Full article

In this study, phenol adsorption from aqueous solutions was investigated using a carbonized adsorbent derived from a 1:1:1 mixture of banana, carrot, and potato peels, representing a major fraction of municipal bio-waste in Serbia. The material (CARB_BCP) was characterized by pH_pzc, SEM, FTIR, and BET analyses. The results indicated a highly porous structure with developed micro- and mesoporosity and a high specific surface area (S_BET = 483 m²/g). FTIR confirmed the formation of a stable aromatic carbon structure, while the high pH_pzc value (10.55) suggested a limited role of electrostatic interactions. Adsorption experiments performed at an initial phenol concentration of 1858 mg/L, room temperature, and an adsorbent dose of 0.1 g achieved a removal efficiency of 20.5%. The Langmuir model provided the best fit, indicating monolayer adsorption, with good agreement between theoretical (≈187 mg/g) and experimental (≈190 mg/g) capacities. Kinetic analysis followed the pseudo-second-order model, suggesting chemisorption as the rate-controlling step. The adsorption mechanism was mainly governed by π–π interactions, hydrophobic effects, and hydrogen bonding. These results demonstrate that CARB_BCP, derived from biodegradable waste, is a promising low-cost adsorbent for wastewater treatment. Full article

The increasing generation of agri-food waste represents a significant environmental challenge, but also a valuable source of bioactive compounds with potential industrial applications. In this study, selected minimally processed agri-food wastes from the food processing industry were evaluated as potential sources of bioactive compounds and antioxidants. Seven types of agri-food waste were investigated: green bean cutting waste, yellow bean cutting waste, sweet corn waste from the air selector, edamame pods, pepper seed by-products, potato peels, and potato waste from the air selector. Solid–liquid extraction was performed using ethanol at different concentrations (20, 40, 60, 80, and 96%, w/w) as a green solvent. Total polyphenol content (TPC) and antioxidant activity (DPPH, FRAP, and ABTS assays) were determined. The results demonstrated significant differences among the investigated raw materials, with the highest antioxidant activity observed in the potato peel extracts. Specifically, the strongest activity was recorded using 40% ethanol, yielding values of 3.9596 mg TE/g DW for DPPH and 11.4555 mg TE/g DW for ABTS assays. In contrast, the highest FRAP value (2.3970 mg Fe²⁺/g DW) was obtained with 60% ethanol. The highest TPC was detected in pepper seed by-products, reaching 6.7829 mg GAE/g DW when extracted with 20% ethanol. Furthermore, selected extracts were subjected to LC-MS analysis to obtain a preliminary characterization of their chemical profiles. Untargeted LC-MS analysis identified 115 metabolites belonging to different chemical classes, highlighting agri-food waste as a rich source of bioactive compounds, particularly flavonoids and phenolic acids. These findings demonstrate agri-food wastes as sustainable sources of bioactive compounds and support their valorization within circular economy and green processing frameworks. Full article

The growing worldwide need for sustainable, high-quality protein sources has intensified interest in single-cell protein (SCP) production, particularly mycoproteins derived from filamentous fungi. This shift is further driven by global sustainability priorities articulated by regulatory bodies, which promote resource efficiency, waste valorization, and sustainable food systems. Despite their high carbohydrate potential, the agricultural sector generates vast quantities of starch-rich by-products. Examples include broken rice, cassava peels, potato waste, and cereal-processing residues, which remain largely underutilized and thereby contribute substantially to environmental pollution. This literature review examines the potential of starch-based agricultural by-products as low-cost, renewable feedstocks for fungal SCP production in support of the Sustainable Development Goals (SDGs). These by-products include broken rice, cassava peels, potato waste, and cereal processing residues, which remain largely underutilized despite their high carbohydrate content. Key topics include pretreatment strategies, fungal fermentation with Neurospora and Fusarium spp., and process optimization to maximize biomass yield and feedstock valorization. Life cycle assessments (LCAs) indicate reduced greenhouse gas emissions compared with conventional protein sources, highlighting the potential of starch residues in circular bioeconomy systems. Furthermore, considerations related to process design, environmental benefits, and techno-economic feasibility are evaluated in the context of converting starch residues into fungal protein. In summary, the evidence suggests that valorizing starch by-products for mycoprotein fermentation, used both as a protein alternative and as an ingredient, represents a promising strategy to reduce waste management and production costs and support global food sustainability. Full article

Bioadsorbents derived from food waste can not only help reduce the amount of such waste but also demonstrate significant potential for CO₂ capture from both the energy sector and other industries. This study evaluates the feasibility of using bioadsorbents obtained from various types of household biowaste—including black and green coffee grounds, tea grounds, potato peels, walnut shells and green walnut shells—for CO₂ capture from flue gas. The bioadsorbents were produced through a two-step process consisting of carbonization followed by KOH activation. The physicochemical properties of the bioadsorbents were characterized using SEM, FTIR, XRD, TGA and BET techniques. The CO₂ sorption capacity was examined for bioadsorbents and for the original biowaste and the biocarbons obtained after carbonization. Isothermal CO₂ adsorption tests were carried out at 25 °C under 100% CO₂ atmosphere. The influence of porous properties—such as specific surface area, total pore volume, micropore volume and average pore diameter—on the CO₂ sorption capacity was assessed for bioadsorbents, biocarbons and raw biowastes. The results showed that the most effective bioadsorbent for CO₂ capture was derived from spent dark roast coffee grounds, with a sorption capacity of 115.8 mg_CO2/g_A. The favorable sorption performance of this bioadsorbent was attributed to its high specific surface area (1580 m²/g), the largest total pore volume (0.84 cm³/g) and micropore volume (0.5 cm³/g) among the tested materials, as well as an optimal average pore diameter (0.96 nm). Similarly favorable structural properties were observed for the potato peel-derived bioadsorbent (APP—1604 m²/g; 0.65 cm³/g) and the bioadsorbent derived from green walnut shells (AGWS—1376 m²/g; 0.64 cm³/g). Their CO₂ adsorption capacities reached 104.1 mg_CO2/g_A and 73.2 mg_CO2/g_A, respectively, for AGWS and APP. Full article

Black soldier fly (Hermetia illucens) larvae (BSFL) represent a sustainable protein source for animal feed, efficiently converting organic waste into high-value biomass. This study aimed to valorize agricultural by-products (apple, potato, and red beetroot peels) as rearing substrates to obtain larvae enriched with bioactive phenolic compounds, while evaluating their nutritional, functional, and safety characteristics. Larvae were reared on diets with varying inclusion levels of each peel’s by-products. Proximate analysis showed that the substrate type and inclusion level significantly (p < 0.05) influenced larval composition, with consistently high protein and variable ash and fat contents. Colorimetric measurements indicated that phenolic-rich diets, particularly apple by-products, promoted cuticle darkening, reflecting the impact of dietary phenols on pigmentation. Functional properties were also modulated by the substrates: 2% potato peel yielded the highest phenolic content, while 20% apple peel produced the highest flavonoid concentration, both enhancing antioxidant capacity across CUPRAC-Cupric Ion Reducing Antioxidant Capacity, ABTS-2,2′-azino-bis 3-ethylbenzothiazoline-6-sulfonic acid, and DPPH-1,1-diphenyl-2-picrylhydrazyl assays. Rheological analysis confirmed desirable non-Newtonian, shear-thinning behavior, suggesting improved technological quality. Mycotoxin testing revealed low Aflatoxin B1 but variable Zearalenone levels, highlighting the influence of substrate composition on toxin metabolism. Overall, agricultural by-products can produce enriched BSFL with enhanced nutritional and antioxidant properties, as long as the substrate choice and inclusion levels are carefully optimized for safety. Full article

Organic residues from households and food-service facilities, such as orange peels, spent coffee grounds, banana peels and potato skins, represent abundant biomass resources that can release undesirable compounds during degradation. Their conversion into carbonized materials through thermochemical processes offers a sustainable route for waste valorization. In this study, residues were characterized by proximate and elemental analyses, density, porosity, and calorific value. Valorization was performed using microwave-assisted pyrolysis and two hydrothermal carbonization (HTC) routes. Pyrolysis experiments were conducted at 450, 600 and 800 W with residence times of 20–70 min. Conventional HTC was carried out at 180, 200 and 220 °C for 20 h, while autoclave HTC was performed at 134 °C for 2 and 4 h. The resulting biochars and hydrochars were evaluated for their physicochemical and energetic properties and ANOVA was applied to assess the influence of operating conditions. Conventional HTC at higher temperatures produced the highest calorific values, whereas microwave-assisted pyrolysis at 800 W provided competitive HHVs with high solid yields. Autoclave HTC enhanced solid retention and carbon preservation. Among the investigated residues, spent coffee grounds exhibited the most favorable solid-phase energetic performance. These findings demonstrate that thermochemical conversion enables the transformation of common residues into carbon-rich materials with physicochemical and energetic properties relevant for comparative assessment and future application-oriented studies. It should be noted that conventional hydrothermal carbonization experiments were conducted using pre-dried biomass, which represents a methodological limitation of the comparative assessment. Full article

Second-generation bioethanol from food industry lignocellulosic residues offers a promising route toward low-carbon, circular bioenergy systems. However, the reported environmental impacts differ markedly across studies, challenging efforts to assess the true sustainability of these waste-derived bioethanol routes. This review synthesizes current knowledge on the production of bioethanol from key agro-industrial wastes including oil palm empty fruit bunches, sugarcane bagasse, brewers’ spent grain, spent coffee grounds, tea waste, citrus residues, and potato peel waste. We outline feedstock characteristics, availability, and prevailing management practices, and map the principal biochemical conversion routes to identify process steps that drive environmental performance. A systematic comparison of life cycle assessments reveals substantial methodological heterogeneity across functional units, system boundaries, allocation procedures, and impact assessment methods. Nonetheless, consistent hotspots emerge, particularly associated with pretreatment severity, enzyme production, thermal energy demand, and co-product handling. The review highlights robust cross-study trends, pinpoints methodological gaps, and proposes recommendations for harmonized LCA practice. By integrating technological and methodological perspectives, this work aims to support the development and policy uptake of sustainable, waste-based bioethanol within circular bioeconomies. Full article

Heavy metals are major toxic anthropogenic contaminants released into the environment mainly through wastewater discharges. Adsorption is one of the most effective and widely applied methods for their removal from aqueous systems. However, although activated carbon is commonly used, its high cost and limited regenerability motivate the search for cheaper and more environmentally friendly alternatives. In this study, selected natural and waste-derived materials were evaluated for Cu²⁺ removal from both model solutions and atypical textile wastewater. Coffee grounds, chestnut seeds, acorns, potato peels, eggshells, marine shells, and poultry bones were tested and compared with commercial activated carbon. Their structural and functional properties were characterised using specific surface area measurements, optical microscopy, SEM-EDS, and FTIR analyses. Two adsorption isotherm models (Langmuir and Freundlich) were used to analyse the experimental data for the selected adsorbents, and model parameters were determined by linear regression. Based on model solution tests, two materials showed the highest Cu²⁺ sorption potential: coarse poultry bones (97.0% at 24 h) and fine cockle shells (96.2% at 24 h). When applied to real textile wastewater, the bone-derived material achieved the highest Cu²⁺ removal efficiency (79.4%). Although this efficiency is lower than typical values obtained in laboratory solutions, it demonstrates the feasibility of waste-derived materials as low-cost adsorbents and suggests that further optimisation could further improve their performance. Full article

This study deals with the successful exploitation of easily available and renewable potato peel waste (PPW) as an excellent feedstock in the production of PHA using Ralstonia eutropha. The process entailed the extraction of bioactive components from PPW by use of solvent-based procedures and screening of their antioxidant and antidiabetic activity. The extracted PPW biomass was subject to acid hydrolysis using different concentrations of sulfuric acid for hydrolysis and solubilization of sugar components. The obtained liquid (acid) hydrolysates were initially assessed to biosynthesize PHA. Activated charcoal-based detoxification of acid hydrolysates was observed to be more efficient in promoting bacterial growth and accumulation of PHA. Acid-pretreated PPW biomass was further enzymatically hydrolysed to accomplish full saccharification and used to produce PHA. The effects of provision of nutrients and employing stress state conditions were assessed to improve bacterial growth and PHA accumulation. In both hydrolysates under optimal conditions, R. eutropha demonstrated the highest biomass productivity of 7.41 g/L and 7.75 g/L, PHA accumulation of 66% and 67% and PHA yield of 4.85 g/L and 5.19 g/L, respectively. XRD, FT-IR, TGA and DSC analysis of produced PHA were studied. The results showed that the produced PHA displayed similar physicochemical and thermal properties to commercially available PHB. Overall, this work illustrates the possibilities of abundantly available PPW, which can be transformed into bioactive compounds and high-value bioplastics via a coupled bioprocess. This approach can develop process economics and sustainability within a cyclic biorefinery system and serve further industry applications. Full article

This study innovatively combines the cyclic catalytic pyrolysis system (CCPS) with a circular pipe device, using biochar from potato peels (PP) and pig manure (PM) to passivate Cd and Pb in the soil, and explores the influencing mechanisms via multiple methods. Results showed that in aqueous adsorption, biochar from the CCPS performed better, with the potato peel-based biochar produced via the cyclic catalytic pyrolysis system (PPB-2) achieving 100% removal of Cd²⁺ and Pb²⁺ within 100–270 min. In the soil remediation experiment using a ring pipe setup, pig manure-based biochar produced via the cyclic catalytic pyrolysis system (PMB-2) exhibited superior performance, reducing Cd concentration from 22.36 mg/kg to 11.21 mg/kg (49.87% removal) and Pb concentration from 718.28 mg/kg to 400.09 mg/kg (44.3% removal) after 40 days. This confirms that the PM-derived biochar prepared by CCPS is more suitable for the remediation of cadmium- and lead-contaminated soils, providing a reference for research on soil heavy metal passivation. Notably, the raw materials (PP and PM) are low-cost, locally abundant agricultural wastes, enabling resource recycling and lowering large-scale application costs. The ring pipe encapsulation further simplifies operational procedures for practical promotion while avoiding direct biochar–soil contact and mitigating secondary pollution risks. Full article

Potato peels are a waste product accounting for 15–40% of the mass of raw potatoes, depending on the processing method employed. The production of solid biofuel from potato peel was investigated in a superheated-steam fluidized bed filled with olivine sand. The co-fluidization of dried, crushed potato peels together with olivine sand was also investigated. Stable co-fluidization of olivine sand and crushed potato peels can be achieved when the mass fraction of potato peels in the fluidized bed does not exceed 3% (w/w). In a fluidized bed containing 3% % (w/w) potato peel, increasing the operational temperature of torrefaction from 200 to 300 °C with a processing duration of 30 min resulted in a 1.35-fold increase in HHV from 20.68 MJ/kg up to 27.93 MJ/kg based on ash-free dry mass. The effects of torrefaction temperature and duration on 5-hydroxymethylfurfural and furfural contents in condensable gaseous torrefaction products were studied, along with changes in the chemical composition of potato peel ash as a result of torrefaction. Furthermore, we analyzed the bed agglomeration index (BAI) predicting the possibility of agglomerate formation during combustion of torrefied potato peel in a fluidized bed and found that the probability of agglomeration may decrease along with increasing temperature and duration of the torrefaction process. Nevertheless, only the most severe torrefaction conditions of 300 °C for 30 min may completely prevent the risk of agglomerate formation during the subsequent combustion of torrefied potato peels as a solid biofuel. The proposed potato peel processing technology may be used in future frozen and fried potato factories in order to solve waste disposal issues while also reducing the costs of heat and electricity generation, as well as allowing for the recovery of high-value biochemicals from the torrefaction condensate. Full article

Anaerobic digestion (AD) is an environmentally friendly, promising solution for the recycling of agro-industrial wastes. However, overloading an anaerobic digester with substrate may cause the inhibition of the AD process. The present study investigated the effects of the substrate/inoculum (S/I) ratio on the AD of potato chip processing (PCP) waste from the potato chip processing industry (PCPI). The PCP waste included expired potato chips (EPCs), recovered potato starch (RPS), and potato peel (PP). Mesophilic AD was carried out in batch-wise static reactors at 35 ± 1 °C using four different S/I ratios (0.5, 1.0, 1.5, and 2.0 g VS/g VS) for each type of waste. Different optimum S/I ratios were obtained for the different wastes; however, the pH ranges were comparable (7.0 to 7.5) for all batches. The optimum S/I ratios for EPCs, RPS, and PP were 1.0, 1.5, and 2.0, respectively. The cumulative biogas yields for EPCs, RPS, and PP were 367.5 ± 6.3, 310.0 ± 5.5, and 202.5 ± 4.9 mL/g VS added, respectively. The methane content of the biogas yields ranged between 60% and 70%. There was a variable remarkable shift in the microbial population at the optimum S/I ratio of each type of waste. The abundance of Firmicutes increased in the case of EPCs and RPS but decreased in the case of PP. Conversely, Proteobacteria increased when using PP as a substrate and decreased in the case of EPCs. Herein, the results of the AD of PCP wastes confirm its potential for the onsite production of renewable bioenergy and reductions in energy bills in the PCPI. In addition, this study provides guidance for optimizing the AD of PCP wastes for large-scale applications. Full article

The functionalization of textiles with nanomaterials through green synthesis offers a promising pathway for sustainable material innovation. This study explores the in situ green synthesis of silver nanoparticles (AgNPs) onto cotton fabrics using Solanum tuberosum (potato) peel extract as a natural reducing and stabilizing agent. The synthesis conditions were optimized by varying silver nitrate concentration, extract volume, temperature, pH, and reaction time, after which the optimized protocol was applied for fabric treatment. The presence and distribution of AgNPs were confirmed through UV-Visible spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy and dynamic light scattering. The treated fabrics demonstrated strong and durable antibacterial performance, with inhibition zones of 23 ± 0.02 against Escherichia coli and 16 ± 0.01 against Staphylococcus aureus. Notably, antibacterial activity was retained even after 20 washing cycles, demonstrating the durability of the treatment. Mechanical testing revealed a 32.25% increase in tensile strength and a corresponding 10.47% reduction in elongation at break compared to untreated fabrics, suggesting improved durability with moderate stiffness. Air permeability decreased by 8.8%, correlating with the rougher surface morphology observed in Scanning Electron Microscopy images. Thermal analysis showed a decrease in thermal stability relative to untreated cotton, highlighting the influence of AgNPs on degradation behavior. Overall, this work demonstrates that potato peel waste, an abundant and underutilized biomass, can be used as a sustainable source for the green synthesis of AgNP-functionalized textiles. The approach provides a cost-effective and environmentally friendly strategy for developing multifunctional fabrics, while supporting circular economy goals in textile engineering. Full article