Search Results (59)

Spinal muscular atrophy (SMA) and severe T- and/or B-cell lymphopenias (STBCL) in the form of severe combined immunodeficiencies (SCID) or X-linked agammaglobulinemia (XLA) are rare but potentially fatal pathologies. In January 2021, we initiated the first pilot study in Spain to evaluate the efficacy of a very early detection technique for SMA and SCID. RT–PCR was performed on prospectively collected dried blood spots (DBSs) from newborns in Western Andalusia (Spain). Internal and external controls (SCID, XLA and SMA) were included. The determination of SMA was relative (positive/negative) and that of TRECs and KRECs was quantitative (copies/punch). A total of 14.035 prospective samples were analysed. All controls were correctly identified while no cases of SMA or SCID/XLA were prospectively identified. DBS analysis of infants with suspected SMA or STBCL that presented to our centre showed pathological values in two cases each for SMA and SCID and one for XLA, all of them being subsequently confirmed genetically. In this prospective pilot study, no infants with SMA or STBCL were detected; however, the technique applied here was shown to be reliable and fast, further supporting the benefits and need to include SMA and SCID in national newborn screening (NBS) programs, as it will allow early supportive and curative therapy. Full article

In plasticulture production systems, the conventional practice involves broadcasting pre-emergent herbicides over the entire surface of raised beds before laying plastic mulch. However, weed emergence predominantly occurs through the transplant punch-holes in the mulch, leaving most of the applied herbicide beneath the plastic, where weeds cannot grow. To address this issue, we developed and evaluated a precision spraying system designed to target herbicide application to the transplant punch-holes. A dataset of 3378 images was manually collected and annotated during a tomato experimental trial at the University of Florida. A YOLOv8x model with a p2 output layer was trained, converted to TensorRT^® to improve the inference time, and deployed on a custom-built computer. A Python-based graphical user interface (GUI) was developed to facilitate user interaction and the control of the smart sprayer system. The sprayer utilized a global shutter camera to capture real-time video input for the YOLOv8x model, which activates or disactivates a TeeJet solenoid for precise herbicide application upon detecting a punch-hole. The model demonstrated excellent performance, achieving precision, recall, mean average precision (mAP), and F1score exceeding 0.90. Field tests showed that the smart sprayer reduced herbicide use by up to 69% compared to conventional broadcast methods. The system achieved an 86% punch-hole recognition rate, with a 14% miss rate due to challenges such as plant occlusion and variable lighting conditions, indicating that the dataset needs to be improved. Despite these limitations, the smart sprayer effectively minimized off-target herbicide application without causing crop damage. This precision approach reduces chemical inputs and minimizes the potential environmental impact, representing a significant advancement in sustainable plasticulture weed management. Full article

Vaccination against human papillomavirus (HPV) significantly reduces the incidence of HPV-related lesions worldwide. Considering the increasingly young age of patients in gynecological offices and earlier sexual initiation and potential contact with the HPV virus, doctors need the tools to verify diagnoses. Currently, women plan to pursue motherhood later, so it is necessary to consider whether sexual treatment in the form of, among others, loop electrosurgical excision procedures (LEEPs) may increase the risk of premature birth or difficulty dilating the cervix during labour. For this reason, to avoid the overtreatment of low-grade squamous intraepithelial lesions (LSILs), methylation testing may be considered. In patients with histopathologically confirmed high-grade squamous intraepithelial lesions (HSILs) during biopsy and, ultimately, a lower diagnosis, i.e., LSIL or no signs of atypia, methylation was found to be a useful tool. We performed a Pap smear, HPV genotyping, a punch biopsy, LEEP-conization (if needed), and methylation tests on 108 women admitted to the District Public Hospital in Poland. Women with a negative methylation test result were significantly more likely to be ultimately diagnosed with LSIL (p = 0.013). This means that in 85.7% of the patients with HSIL, major cervical surgery could be avoided if the methylation test was negative. Methylation testing, as well as dual-staining and diagnostics detecting the mRNA transcripts of highly oncogenic types of HPV, might be used in the future in the diagnosis of pre-cancerous conditions, mainly of the cervix, and in HPV-dependent cervical cancer screening. The methylation test may also be used in the diagnosis and identification of lesions within the cervical canal, including those located deep within the frontal crypts, not visible even during a professional colposcopic evaluation of the cervix. Full article

The evaluation of wrinkles in deep-drawn fiber-based materials is crucial for the assessment of product quality and the optimization of manufacturing processes. Wrinkling is a common phenomenon in the deep-drawing process and is caused by tangential compressive stresses on the flanges of the blank. This phenomenon is particularly prevalent for fiber-based materials with high tensile depths and can seriously affect the appearance and mechanical properties of the final product. The objective of this study is to identify the key process parameters affecting wrinkling and to deepen the understanding of their roles and interactions using wrinkle data for deep-drawn paper products. Image analysis techniques are employed, supported by a specially constructed darkroom platform to ensure uniform light intensity for capturing photographs. An automated program is developed for the detection and evaluation of wrinkle characteristics and distribution, which allows the free choice of the region to be detected and the representation of the wrinkle geometry not limited by the number. To enhance the precision of this program, the ellipticity is initially rectified for products without flanges, specifically cup-shaped deep-drawn products. The ellipticity is caused by the pronounced springback effect of the paperboard. The approach is employed to investigate the impact of material properties, blank holder force, drawing depth, drawing clearance, and punch speed on wrinkling formation after the deep-drawing process. The findings reveal that the blank holder force and drawing clearance are critical factors in wrinkle formation, with higher blank holder force generally leading to increased wrinkle numbers. Full article

This comprehensive review examines the phenomena of stress corrosion cracking (SCC) and chloride-induced stress corrosion cracking (Cl-SCC) in materials commonly used in the oil and gas industry, with a focus on austenitic stainless steels. The study reveals that SCC initiation can occur at temperatures as low as 20 °C, while Cl-SCC propagation rates significantly increase above 60 °C, reaching up to 0.1 mm/day in environments with high chloride concentrations. Experimental methods such as Slow Strain Rate Tests (SSRTs), Small Punch Tests (SPTs), and Constant-Load Tests (CLTs) were employed to quantify the impacts of temperature, chloride concentration, and pH on SCC susceptibility. The results highlight the critical role of these factors in determining the susceptibility of materials to SCC. The review emphasizes the importance of implementing various mitigation strategies to prevent SCC, including the use of corrosion-resistant alloys, protective coatings, cathodic protection, and corrosion inhibitors. Additionally, regular monitoring using advanced sensor technologies capable of detecting early signs of SCC is crucial for preventing the onset of SCC. The study concludes with practical recommendations for enhancing infrastructure resilience through meticulous material selection, comprehensive environmental monitoring, and proactive maintenance strategies, aimed at safeguarding operational integrity and ensuring environmental compliance. The review underscores the significance of considering the interplay between mechanical stresses and corrosive environments in the selection and application of materials in the oil and gas industry. Low pH levels and high temperatures facilitate the rapid progression of SCC, with experimental results indicating that stainless steel forms passive films with more defects under these conditions, reducing corrosion resistance. This interplay highlights the need for a comprehensive understanding of the complex interactions between materials, environments, and mechanical stresses to ensure the long-term integrity of critical infrastructure. Full article

Computer vision in sports analytics is gaining in popularity. Monitoring players’ performance using cameras is more flexible and does not interfere with player equipment compared to systems using sensors. This provides a wide set of opportunities for computer vision systems that help coaches, reporters, and audiences. This paper provides an introduction to the problem of measuring boxers’ performance, with a comprehensive survey of approaches in current science. The main goal of the paper is to provide a system to automatically detect punches in Olympic boxing using a single static camera. The authors use Euclidean distance to measure the distance between boxers and convolutional neural networks to classify footage frames. In order to improve classification performance, we provide and test three approaches to manipulating the images prior to fitting the classifier. The proposed solution achieves 95% balanced accuracy, 49% F1 score for frames with punches, and 97% for frames without punches. Finally, we present a working system for analyses of a boxing scene that marks boxers and labelled frames with detected clashes and punches. Full article

Objective: To evaluate the diagnostic accuracy of Electrical Impedance Spectroscopy (EIS)-assisted colposcopy in detecting CIN2+ Greek women towards standalone colposcopy, HPV mRNA testing, and p16/Ki67 immunostaining. Methods: We conducted a cross-sectional observational study at the Cervical Pathology Clinic of the 2nd Obstetrics-Gynecology University Department of Hippokration Hospital Thessaloniki involving 316 patients from January 2022 to August 2023. All participants provided liquid-based cervical samples for cytology, HPV mRNA testing, and p16/Ki67 immunostaining. Main Outcome Measures: Subsequently, participants underwent both standalone colposcopy and EIS/ZedScan-assisted colposcopy, followed by cervical punch biopsies. Results: The incorporation of EIS significantly enhanced the sensitivity of colposcopy, increasing it from 54.17% to 100%, equivalent to that of HPV mRNA testing and p16/Ki67 immunostaining, while achieving a high specificity (95.45%). The specificities observed with EIS/ZedScan-assisted and standalone colposcopy were notably superior to those of HPV-related biomarkers (HPV mRNA test and p16/Ki67 immunostaining). When compared to standalone colposcopy, HPV mRNA testing, and p16/Ki67 immunostaining, EIS/ZedScan-assisted colposcopy demonstrated the most favorable combination of Positive and Negative Predictive Values, at 90.57% and 100%, respectively. The inclusion of EIS/ZedScan in colposcopy led to the detection of 44 additional cases of true CIN2+ (100% of the total CIN2+ confirmed histologically) that were missed by standalone colposcopy. This discovery suggests a 45.83% increase in the detection of CIN2+ cases. Conclusions: The integration of EIS with colposcopy has demonstrated effectiveness in detecting cervical lesions, resulting in a significant detection increase of CIN2+ cases while offering optimal levels of sensitivity, specificity, and predictive values for CIN2+ detection. Full article

Dendritic cell (DC) migration from peripheral tissues via afferent lymphatic vessels to draining lymph nodes (dLNs) is important for the organism’s immune regulation and immune protection. Several lymphatic endothelial cell (LEC)-expressed adhesion molecules have thus far been found to support transmigration and movement within the lymphatic vasculature. In this study, we investigated the contribution of CD112, an adhesion molecule that we recently found to be highly expressed in murine LECs, to this process. Performing in vitro assays in the murine system, we found that transmigration of bone marrow-derived dendritic cells (BM-DCs) across or adhesion to murine LEC monolayers was reduced when CD112 was absent on LECs, DCs, or both cell types, suggesting the involvement of homophilic CD112–CD112 interactions. While CD112 was highly expressed in murine dermal LECs, CD112 levels were low in endogenous murine dermal DCs and BM-DCs. This might explain why we observed no defect in the in vivo lymphatic migration of adoptively transferred BM-DCs or endogenous DCs from the skin to dLNs. Compared to murine DCs, human monocyte-derived DCs expressed higher CD112 levels, and their migration across human CD112-expressing LECs was significantly reduced upon CD112 blockade. CD112 expression was also readily detected in endogenous human dermal DCs and LECs by flow cytometry and immunofluorescence. Upon incubating human skin punch biopsies in the presence of CD112-blocking antibodies, DC emigration from the tissue into the culture medium was significantly reduced, indicating impaired lymphatic migration. Overall, our data reveal a contribution of CD112 to human DC migration. Full article

Compared with conventional colposcopy, colposcopy assisted by DSI-map increases the detection of HSIL/CIN2+ and might help to identify the lesions more likely to regress. Introduction: Comparison of the performance of colposcopy assisted by dynamic spectral imaging (C-DSI) with that of conventional colposcopy (CC) in the diagnosis of cervical intraepithelial neoplasia (HSIL/CIN2 or CIN3). Materials and Methods: A total of 1655 women were referred for colposcopy between 2012 and 2020 and included in the study. Of that total, 973 were examined by the same colposcopist with C-DSI, and 682 with CC. Comparisons between CC and C-DSI were made by using the histological diagnosis performed with a punch biopsy or loop electrosurgical excision procedure (LEEP) as the gold standard. A follow-up study was conducted until 2021 to detect progression to HSIL/CIN2 at 6, 12 and 24 months after first examination. Results: C-DSI provided higher sensitivity for the diagnosis of HSIL/CIN2 or CIN 3 than CC (sensitivity of 76.8% and 86.6% vs. 54.2% and 72.2%, respectively). In negative or ASCUS/LSIL Pap smear results, C-DSI showed higher sensitivity than CC (sensitivity of 66.7% and 61.5% vs. 21.4% and 33.3%, respectively). In contrast, these differences were not observed in high-grade Pap smears. The sensitivity of C-DSI in cases with HPV16/18 infection was stronger than that of CC (73.53% vs. 56.67%). The sensitivity of C-DSI to detect the progression to HSIL/CIN2+ during follow-up was 30, 17.6 and 35.7% at 6, 12 and 24 months, respectively. Conclusions: The present study shows that C-DSI in women referred for colposcopy increases the HSIL/CIN 2–3 detection rate compared to conventional colposcopy. Nevertheless, C-DSI does not seem to be an important tool to predict the evolution of the lesions during follow-up. Full article

Studying the effect of quench and tempering heat treatments on steel, more specifically screening the effect of the austenitizing, quenching, and tempering conditions on mechanical properties, can be extremely material- and time-consuming when standard tensile testing specimens are employed. Jominy bar end quench testing has been used as a standard method to reduce the resources that are required for this type of screening. Jominy bar testing by itself shows, though, the limitation of yielding only hardness and microstructure as a result. In the last few years, the small punch test (SPT) standard has been developed. This technique can obtain an estimation of tensile mechanical properties with miniaturized specimens, which can be dissected from Jominy bars. The paper proposes a new testing methodology for screening the outcome of heat treatment conditions by combining the Jominy bar testing and SPT. Quench and tempering of API 5L X65Q pipe steel is used as a case study to describe the proposed methodology. The ability of the Jominy with SPT to detect variations in the mechanical properties produced by heat treatments is shown. This methodology can be directly applied as a high-throughput testing approach in the optimization of heat treatments. Full article

Background: Velocity-based training (VBT) requires measurement of the velocity at which the barbell is moved in the concentric phase with regard to different resistance exercises, which provides accurate, indirect estimations of 1 RM. However, for assessing punch performance, no study has been carried out to date. The purpose of this study was to analyse the reliability of the GymAware linear transducer for the measurement of barbell velocity during the landmine push throw (LPT) test using four loads. Methods: Twenty-five healthy, physically active male students, aged 24.13 ± 2.82 years, volunteered to take part in this study. The reliability of the LPT test was measured at two separate visits, with a 2-day interval between them. One series of the test protocol included four parts of the LPT test with progressively increasing loads (20, 25, 30, and 35 kg) and 5 min intervals for rests between loads. Results: For all four loads, excellent intra-rater and test–retest reliability was noted for the mean force variable (ICC = 0.97–0.99). Additionally, very strong and significant correlations were established between measurements (r = 0.96–0.99). Poor reliability was observed for barbell height and total work (ICC below 0.5). A trend of decreasing reliability was detected with increasing barbell load. Furthermore, measurements without the barbell throw were more reliable than those with it. Conclusions: These results support the use of the GymAware linear transducer to track barbell velocity during the LPT test. This device may have valuable practical applications for strength and conditioning coaches. Therefore, we suggest that the LPT assessed with the GymAware linear transducer may be a useful method for evaluating upper limb strength and power during boxing punches. Full article

The collection of dried blood spots (DBS) facilitates newborn screening for a variety of rare, but very serious conditions in healthcare systems around the world. Sub-punches of varying sizes (1.5–6 mm) can be taken from DBS specimens to use as inputs for a range of biochemical assays. Advances in DNA sequencing workflows allow whole-genome sequencing (WGS) libraries to be generated directly from inputs such as peripheral blood, saliva, and DBS. We compared WGS metrics obtained from libraries generated directly from DBS to those generated from DNA extracted from peripheral blood, the standard input for this type of assay. We explored the flexibility of DBS as an input for WGS by altering the punch number and size as inputs to the assay. We showed that WGS libraries can be successfully generated from a variety of DBS inputs, including a single 3 mm or 6 mm diameter punch, with equivalent data quality observed across a number of key metrics of importance in the detection of gene variants. We observed no difference in the performance of DBS and peripheral-blood-extracted DNA in the detection of likely pathogenic gene variants in samples taken from individuals with cystic fibrosis or phenylketonuria. WGS can be performed directly from DBS and is a powerful method for the rapid discovery of clinically relevant, disease-causing gene variants. Full article

Austenitic stainless steel gears were fabricated via the fine blanking process that can be used for mass production. A carbon-supersaturated (CS)-matrix high-speed steel punch was prepared to minimize the adhesive and abrasive wear damage. Its edge profile was tailored and finished to control the local metal flow around the punch edges and edge corners. This CS punch was utilized in fine blanking the AISI304 austenitic stainless steel gears. Ball-on-disc (BOD) testing was first employed to describe the frictional behavior of the CS tool steel disc against the AISI304 stainless steel balls. SEM-EDX analysis on the wear track revealed that a free-carbon tribofilm was formed in situ in the wear track to prevent adhesive wear via galling on the tool steel disc. No significant adhesive or abrasive wear was detected on the punch edges and punch edge corners after continuously fine blanking with 50 strokes. AISI304 gears were produced to have fully burnished surfaces. Their pitches, widths and circles were measured to evaluate their gear-grade balancing during the fine blanking process. The stabilized gear-grade balancing in JIS-9 to JIS-10 grades was attained for these as-blanked AISI304 gears without finishing processes. Full article

The increasing interest in karate has also attracted the attention of researchers, especially in combining the equipment used by practitioners with technology to prevent injuries, improve technical skills and provide appropriate scoring. Contrary to the sport of taekwondo, the development of a smart body protector in the sport of karate is still a niche field to be researched. This study focused on developing piezoresistive, textile-based pressure sensors using piezoresistive film, conductive fabric as well as different bonding materials and methods. Primarily, small-scale sensors were produced using ultrasonic welding, hot press welding and oven curing. These were characterized using a universal testing machine and specific conditioning and data-acquisition hardware combined with custom processing software. Large-scale sensors were then manufactured to be placed inside the karate body protector and characterized using cyclic testing. The conditioning circuit allows flexible gain adjustment, and it was possible to obtain a stable signal with an output of up to 0.03 V/N, an adequate signal for the tested force range. The transfer function shows some drift over the cycles, in addition to the expected hysteresis and slight nonlinearity, which can be compensated for. Finally, the configuration with the best results was tested in real practice tests; during these tests the body protector was placed on a dummy as well as on a person. The results showed that the piezoresistive textile-based pressure sensor produced is able to detect and quantify the impact of even light punches, providing an unobtrusive means for performance monitoring and score calculation for competitive practice of this sport. Full article

Recent studies have been able to detect α-synuclein (αSyn) seeding in formaldehyde-fixed paraffin-embedded (FFPE) tissues from patients with synucleinopathies using seed amplification assays (SAAs), but with relatively low sensitivity due to limited protein extraction efficiency. With the aim of introducing an alternative option to frozen tissues, we developed a streamlined protein extraction protocol for evaluating disease-specific seeding in FFPE human brain. We evaluated the protein extraction efficiency of different tissue preparations, deparaffinizations, and protein extraction buffers using formaldehyde-fixed and FFPE tissue of a single Lewy body disease (LBD) subject. Alternatively, we incorporated heat-induced antigen retrieval and dissociation using a commercially available kit. Our novel protein extraction protocol has been optimized to work with 10 sections of 4.5-µm-thickness or 2-mm-diameter micro-punch of FFPE tissue that can be used to seed SAAs. We demonstrated that extracted proteins from FFPE still preserve seeding potential and further show disease-specific seeding in LBD and multiple system atrophy. To the best of our knowledge, our study is the first to recapitulate disease-specific αSyn seeding behaviour in FFPE human brain. Our findings open new perspectives in re-evaluating archived human brain tissue, extending the disease-specific seeding assays to larger cohorts to facilitate molecular subtyping of synucleinopathies. Full article