Search Results (11,544)

The production of alumina produces red mud (RM), a highly alkaline solid waste. The majority of it is disposed of in landfills, which seriously pollutes the environment. It needs to be recycled and handled with care to protect the environment. RM is a promising raw material for wastewater and waste gas treatment owing to its high alkalinity and abundant metal compounds. It can efficiently remove diverse pollutants while facilitating large-scale utilization of RM resources. Reviews of the use of RM resources to create catalysts for environmental governance are, nevertheless, scarce. Therefore, this paper analyzes and summarizes the pertinent research on RM-based catalysts to remove pollutants from the environment based on journal literature related to RM resource utilization from 2015 to 2025. This study reviews the application of RM-based catalysts for degrading pollutants in wastewater and exhaust gases via advanced oxidation processes (AOPs)—including photocatalysis, Fenton-like catalysis, ozonation catalysis, and persulfate catalysis—as well as catalytic oxidation, chemical looping combustion (CLC), and selective catalytic reduction (SCR). The paper emphasizes the analysis of modification strategies and catalytic mechanisms of RM-based catalysts in environmental remediation and examines the environmental risks and corresponding mitigation measures related to their preparation from RM resources. Finally, it outlines that future research should prioritize green, low-energy modification processes; catalytic systems for the synergistic removal of multiple pollutants; and efficient, recyclable separation and recovery technologies. These directions aim to promote the sustainable application of RM in large-scale environmental remediation and to achieve the integrated advancement of resource utilization and ecological protection. Full article

The vulnerability of copper to corrosion in humid and saline environments remains a critical challenge for its long-term use. In this work, we present a streamlined and scalable approach for fabricating superhydrophobic, corrosion-resistant copper surfaces by integrating a simple wet chemical oxidation process with atmospheric pressure chemical vapor deposition (APCVD) of a perfluorinated silane. The hierarchical CuO nanostructures formed via alkaline oxidation serve as a robust layer, while subsequent silane functionalization imparts low surface energy, resulting in surfaces with water contact angles exceeding 170° and minimal contact angle hysteresis. Comprehensive surface characterization by SEM and roughness analysis confirmed the preservation of hierarchical morphology after coating. Wettability studies reveal a transition from hydrophilic to superhydrophobic behavior, with the Cassie–Baxter regime achieved on nanostructured and silane-functionalized samples, leading to enhanced droplet mobility and self-cleaning effect. Salt spray tests demonstrate that the superhydrophobic surfaces exhibit a corrosion rate reduction of 85.7% (from 2.51 mm/year for bare copper to 0.36 mm/year for the treated surface), indicating a seven-fold improvement in corrosion resistance compared to bare copper. This methodology offers a practical, reproducible route to multifunctional copper surfaces, advancing their potential for use in anti-fouling, self-cleaning, and long-term protective applications. Full article

Globally, cardiovascular diseases represent a major cause of morbidity and mortality, despite the availability of preventive, diagnostic, and therapeutic measures in contemporary allopathic medicine. In accordance with their ethnomedical applications, herbal medicines may offer valuable options for the prevention, treatment, and management of cardiovascular disorders. Considering that cardioprotective effects are associated with antioxidant mechanisms, and that our knowledge of the antioxidant properties of polyphenolic compounds, as well as of the effects of Melilotus species on the heart, is limited, the present study aimed to evaluate the cardioprotective potential of hydroalcoholic extracts of M. officinalis and M. albus aerial parts. The extracts were evaluated for total phenolic content (TPC), total flavonoid content (TFC), and total coumarin content (TCC) by spectrophotometric methods and by LC-MS/MS. The effect of pretreatment with Melilotus sp. extracts on the isoprenaline-induced infarct-like lesion in rats was evaluated by ECG monitoring and the assessment of serum oxidative stress markers and serum cardiac injury markers. Various polyphenolic compounds were identified by LC-MS/MS in M. officinalis and M. albus aerial parts: catechin, syringic acid, protocatechuic acid, and vanillic acid. Gallic acid and chlorogenic acid were found only in M. officinalis. The extracts showed good in vivo antioxidant activity: M. officinalis and M. albus extracts induced a significant decrease in the levels of oxidative stress index (OSI) and total oxidant status (TOS), while pre-treatment with M. albus extract induced a significant reduction in nitric oxide production, and pretreatment with M. officinalis increased total thiols (SH) levels. In the same way, ECG and cardiac injury markers were also improved. These results show that M. officinalis and M. albus extracts may exert cardioprotective effects against myocardial ischemia by reducing oxidative stress. Full article

Ginkgo biloba leaf flavonoids, while demonstrating antioxidant potential, remain underexplored as natural stabilizers for frying oils under thermo-oxidative stress. This study assessed Ginkgo biloba leaf flavonoids efficacy against synthetic tertiary-butylhydroquinone (0.02%). Ginkgo biloba leaf flavonoids were extracted via optimized ultrasonic-assisted methods (15 mL/g solvent, 80% ethanol, 45 °C, 120 s). Frying stability in flaxseed and soybean oils over 6 days (24 cycles/day) was evaluated using multi-indicator kinetic analysis. Ginkgo biloba leaf flavonoids significantly outperformed tertiary-butylhydroquinone in reducing oxidation markers after 6 days. In flaxseed oil, Ginkgo biloba leaf flavonoids reduced acid value (18.4%), peroxide value (33.79%), and polar compounds (52.03%); reductions in soybean oil reached 61.34% for polar compounds. Ginkgo biloba leaf flavonoids better preserved γ-tocopherol in flaxseed oil (increased 2.09% retention) and key tocopherols in soybean oil. Critically, it mitigated unsaturated fatty acid losses (flaxseed C18:3: 2.72% higher; soybean C18:2: 4.4% higher) and limited saturated fatty acid increases. Optimized Ginkgo biloba leaf flavonoid extraction facilitates its application as a promising natural candidate for high-temperature frying, where its matrix-specific stabilization effect shows potential in commercial functional oil formulations. Full article

Vegetable oils structured with natural wax blends have attracted increasing interest due to their tunable crystallization and gelling behavior. This study evaluated the structuring of chia oil (ChO) using low concentrations (1–5%) of a shellac wax (SW) and beeswax (BW) blend in a 1:1 ratio, focusing on physicochemical, viscoelastic, and thixotropic properties. ChO structured with 1% SW/BW formed a weak network with high oil loss, whereas concentrations of 3–5% formed denser networks, resulting in OBC values of 75.6–88.4% and firmness values of 16.9–55.1 g. Structuring with 5% SW/BW significantly reduced peroxide values (p < 0.05), indicating a reduction in oxidative deterioration after oleogelation, while concentrations of 1–3% had no significant effect (p > 0.05). Although induction periods were slightly extended in structured samples, differences across oleogelant concentrations were not statistically significant (p > 0.05). Rheological analysis revealed that 3–5% SW/BW-structured ChO exhibited semisolid gel behavior, characterized by enhanced deformation resistance and thermal stability. Thixotropic recovery tests revealed that structural recovery improved as the deformation amplitude decreased within the linear viscoelastic range, suggesting that thixotropic behavior was influenced by oleogelant concentration. These findings demonstrate the potential of SW/BW-structured ChO as fat alternatives in lipid-based foods that require mechanical resilience, structural recovery, and enhanced oxidative stability, even at low wax levels. Full article

In this study, a hybrid sensor-based electronic nose circuit was developed using eight metal-oxide semiconductors and 14 quartz crystal microbalance gas sensors. This study included 100 participants: 60 individuals diagnosed with lung cancer, 20 healthy nonsmokers, and 20 healthy smokers. A total of 338 experiments were performed using breath samples throughout this study. In the classification phase of the obtained data, in addition to traditional classification algorithms, such as decision trees, support vector machines, k-nearest neighbors, and random forests, the fuzzy logic method supported by the optimization algorithm was also used. While the data were classified using the fuzzy logic method, the parameters of the membership functions were optimized using a nature-inspired optimization algorithm. In addition, principal component analysis and linear discriminant analysis were used to determine the effects of dimension-reduction algorithms. As a result of all the operations performed, the highest classification accuracy of 94.58% was achieved using traditional classification algorithms, whereas the data were classified with 97.93% accuracy using the fuzzy logic method optimized with optimization algorithms inspired by nature. Full article

Hydrogen-fueled internal combustion engines present a promising pathway for reducing carbon emissions in urban transportation by allowing for the reuse of existing vehicle platforms while eliminating carbon dioxide emissions from the exhaust. However, operating these engines with lean air–fuel mixtures—necessary to reduce nitrogen oxide emissions and improve thermal efficiency—leads to significant reductions in power output due to the low energy content of hydrogen per unit volume and slower flame propagation. This study investigates whether integrating a mild hybrid electric system, operating at 48 volts, can mitigate the performance losses associated with lean hydrogen combustion in a small passenger vehicle. A complete simulation was carried out using a validated one-dimensional engine model and a full zero-dimensional vehicle model. A Design of Experiments approach was employed to vary the electric motor size (from 1 to 15 kW) and battery capacity (0.5 to 5 kWh) while maintaining a fixed system voltage, optimizing both the component sizing and control strategy. Results showed that the best lean hydrogen hybrid configuration achieved reductions of 18.6% in energy consumption in the New European Driving Cycle and 5.5% in the Worldwide Harmonized Light Vehicles Test Cycle, putting its performance on par with the gasoline hybrid benchmark. On average, the lean H₂ hybrid consumed 41.2 kWh/100 km, nearly matching the 41.0 kWh/100 km of the gasoline P0 configuration. Engine usage analysis demonstrated that the mild hybrid system kept the hydrogen engine operating predominantly within its high-efficiency region. These findings confirm that lean hydrogen combustion, when supported by appropriately scaled mild hybridization, is a viable near-zero-emission solution for urban mobility—delivering competitive efficiency while avoiding tailpipe CO₂ and significantly reducing NO_x emissions, all with reduced reliance on large battery packs. Full article

Surrogate viruses provide a safe and scalable alternative for evaluating disinfectant efficacy when access to high-risk pathogens is restricted. This study evaluated the potential of Modified Vaccinia Ankara (MVA) virus, which can be handled under BSL-1/2 conditions, as a surrogate for avian influenza virus (AIV), foot-and-mouth disease virus (FMDV), and African swine fever virus (ASFV). A total of 64 commercially available disinfectants—classified into four major chemical groups: quaternary ammonium compounds, oxidizing agents, PPMS-based formulations, and organic acids—were tested in suspension assays using a ≥4 log reduction as the efficacy criterion. MVA showed the strongest predictive performance for FMDV (r = 0.671, AUC = 0.83), supporting its use for both binary classification and approximate quantitative prediction. Although its correlation with ASFV was weaker (r = 0.175), the classification performance remained moderate (AUC = 0.78), indicating conditional applicability. While MVA exhibited no meaningful correlation with AIV, its higher chemical resistance meant that disinfectants effective against MVA were consistently effective against AIV. These results support the use of MVA as a conservative exclusion tool for fragile viruses. Overall, the findings demonstrate that MVA can serve as a practical surrogate virus for disinfectant efficacy testing against FMDV, ASFV, and AIV, with application strategies tailored to each virus’s characteristics. Full article

Background: Dicarbonyls and advanced glycation end-products (AGEs) contribute to oxidative stress, inflammation, and complications in type 2 diabetes mellitus (T2DM). Menaquinone-7 (MK-7), a vitamin K2 subtype, has shown benefits for glucose tolerance and vascular health in some studies. We evaluated the impact of MK-7 on dicarbonyls, free AGEs, and protein nitration/oxidation adducts in a rat model of T2DM. Methods: Male heterozygous (fa/+, control) and homozygous (fa/fa, diabetic) Zucker Diabetic Fatty rats were fed a diabetogenic diet without or with MK-7 for 12 weeks. After sacrifice, plasma dicarbonyls as well as plasma and urinary levels of free AGEs and protein nitration/oxidation adducts were quantified by isotope dilution tandem mass spectrometry. Results: Diabetic rats showed significantly increased plasma glyoxal, 3-deoxyglucosone, and fructosyl-lysine with non-significant trends toward increased methylglyoxal-derived hydroimidazolone and methionine sulfoxide, as well as reductions in methylglyoxal and dityrosine. Urinary carboxyethyl-lysine, carboxymethyl-lysine, fructosyl-lysine (all significant), and dityrosine (non-significant) were elevated in diabetic rats; glucosepane (non-significant) was reduced. MK-7 supplementation reduced no measured parameter but was associated with non-significant further increases in plasma glyoxal-derived hydroimidazolone, carboxyethyl-lysine, carboxymethyl-lysine, fructosyl-lysine, 3-nitrotyrosine, and methionine sulfoxide, as well as in urinary glyoxal-derived hydroimidazolone, carboxyethyl-lysine, fructosyl-lysine, and 3-nitrotyrosine, in diabetic rats. Correlation analysis revealed significant associations between glucose, dicarbonyls, AGEs, and oxidative markers. Conclusions: High-dose MK-7 supplementation did not improve dicarbonyl stress, AGE burden, or protein nitration/oxidation. With respect to available scientific evidence and our observations, the combination of glycemia-driven amplification of glycation and oxidative stress, as well as MK-7-induced glutathione depletion, were likely causative. Full article

Reductive amination of cyclohexanone with NH₃ and H₂ over Rh and Rh-Ni catalysts on SiO₂ has been studied. Research has focused on the catalytic efficiency of monometallic and bimetallic catalysts in the production of cyclohexylamine, a key intermediate in the synthesis of numerous fine chemicals. Through the wet impregnation method, Rh and Rh-Ni catalysts with varying nickel loadings (1, 2, 5, and 10 wt.%) were synthesized and characterized using techniques such as N₂ physisorption, TEM, HAADF-STEM, XRD, XPS, H₂-TPR, and NH₃-TPD. The catalytic reactions were conducted under controlled conditions using a glass-coated reactor, using ammonia as nitrogen source. Rh-Ni bimetallic catalysts exhibited the highest conversion rates on reductive amination, attributed to enhanced dispersion and advantageous surface properties. High metal dispersion and small particle sizes were confirmed by TEM, HAADF-STEM, and XRD. XPS analysis confirmed the reduced state of Rh and mainly oxidized state of Ni, while H₂-TPR and NH₃-TPD results indicated improved reducibility and acidity, respectively, which are critical for catalytic activity. Monometallic Rh/SiO₂ catalyst showed 83.4% of conversion after 300 min and selectivity of 99.1% toward the desired product cyclohexylamine. The addition of nickel, a cheap and easily available metal, increases the activity without compromising selectivity. At 300 min of the reaction, the 2 wt.% NiRh/SiO₂ catalyst exhibited the highest conversion, yield, and selectivity for the desired product cyclohexylamine, 99.8%, 96.4%, and 96.6% respectively. Additionally, this catalyst is recyclable after the fourth cycle, showing 99.5% selectivity and 74.0% yield for cyclohexylamine at 75.7% conversion. Recycling tests confirmed the stability of bimetallic catalysts, maintaining performance over multiple cycles without significant deactivation. Full article

The tomato leafminer (Tuta absoluta) is a globally invasive pest that causes severe yield losses in tomato crops. Nanotechnology-based strategies offer promising alternatives to conventional insecticides. This study examines the physiological, biochemical, and demographic responses of T. absoluta following exposure to mesoporous silica nanoparticles (MSNs) applied to tomato leaves at concentrations of 0, 3, 30, and 300 mg L⁻¹. Comprehensive assessments were conducted, including digestive and detoxifying enzyme activities in the insect, neurotoxicity indicators, life table parameters, and antioxidant responses in the host plant. At 30 mg L⁻¹, MSNs significantly impaired larval development, fecundity, and survival of T. absoluta without inducing phytotoxicity. Tomato plants treated at this concentration exhibited enhanced antioxidant enzyme activity (SOD, CAT, POD) and a reduced malondialdehyde (MDA) content, indicating an active oxidative defense. These plant responses were significantly correlated with changes in insect fitness traits, suggesting a plant-mediated effect on pest physiology. Digestive enzyme disruption, decreased acetylcholinesterase activity, and extended developmental periods contributed to suppressed population growth, as evidenced by reductions in the intrinsic rate of increase (r), net reproductive rate (R₀), and fecundity. At 300 mg L⁻¹, however, severe phytotoxicity and enzymatic collapse were observed in both plant and insect systems. These findings highlight moderate concentration of MSNs (30 mg L⁻¹) as a promising dose for sustainable and host-safe pest management, offering multi-targeted suppression of T. absoluta through combined plant and insect biochemical pathways. Full article

Supports used in heterogeneous metallic catalysts serve as a structural skeleton across which metallic nanoparticles are dispersed, but specific properties of the supports may also determine the behavior of these nanoparticles in catalytic processes. For example, it is known that among various properties of crystalline alkaline earth metal oxides serving as supports, the ability of their surface sites to donate electrons, that is their basicity, has an influence on the characteristics of the adsorbed metal. In the present work, the influence of MeO (Me = Mg, Ca, and Sr) basicity on the adsorption of Pb on the (100) surface of MeO crystals is studied by means of a dispersion-corrected density functional theory (DFT-D) computational method. The DFT-D calculations have characterized essential structural parameters, energetics, and the distribution of the electron charge for the Pb atoms and Pb dimers adsorbed at the regular O²⁻ and defective F_s centers of MeO(100). It has been observed that an increase in the basicity of MeO(100) in the sequence MgO < CaO < SrO results in a more energetically favorable effect of Pb adsorption, a stronger interaction between Pb and the surface, and a greater amount of electron charge acquired by the adsorbed Pb atoms and dimers. These findings contribute to a better understanding of how support basicity may modulate certain characteristics of MeO-supported metallic catalysts containing Pb as an additive. From a computational viewpoint, this work shows that the inclusion of spin–orbit relativistic correction in the DFT-D calculations leads to a significant reduction in the strength of the interaction between Pb and MeO(100), but it does not change the aforementioned trend in the strength of this interaction as a function of support basicity. Full article

Inflammatory bowel diseases (IBDs), such as ulcerative colitis, and Crohn’s disease are chronic idiopathic inflammatory diseases of the gastrointestinal system involving interaction between genetic and environmental factors mediating the occurrence of oxidative stress and inflammation. There is no permanent cure for IBD except long-term treatment or surgery (resection of the intestine), and the available agents in the long term appear unsatisfactory and elicit numerous adverse effects. To keep the disease in remission, prevent relapses and minimize adverse effects of currently used medicines, novel dietary compounds of natural origin convincingly appear to be one of the important therapeutic strategies for the pharmacological targeting of oxidative stress and inflammation. Therefore, it is imperative to investigate plant-derived dietary agents to overcome the debilitating conditions of IBD. In the present study, the effect of α-Bisabolol (BSB), a dietary bioactive monoterpene commonly found in many edible plants as well as important components of traditional medicines, was investigated in acetic acid (AA)-induced colitis model in rats. BSB was orally administered to Wistar male rats at a dose of 50 mg/kg/day either for 3 days before or 30 min after induction of IBD for 7 days through intrarectal administration of AA. The changes in body weight, macroscopic and microscopic analysis of the colon and calprotectin levels in the colon of rats from different experimental groups were observed on day 0, 2, 4, and 7. The levels of myeloperoxidase (MPO), a marker of neutrophil activation, reduced glutathione (GSH) and malondialdehyde (MDA), a marker of lipid peroxidation, and the levels of pro-inflammatory cytokines were measured. AA caused a significant reduction in body weight and induced macroscopic and microscopic ulcers, along with a significant decline of endogenous antioxidants (superoxide dismutase (SOD), catalase, and GSH), with a concomitant increase in MDA level and MPO activity. BSB significantly improved the AA-induced reduction in body weight, colonic mucosal histology, inhibited MDA formation, and restored antioxidant levels along with a reduction in MPO activity. AA also induced the release of pro-inflammatory cytokines such as interleukin-1 (IL-1), interleukin-23 (IL-23) and tumor necrosis factor-α (TNF-α). Furthermore, AA also increased levels of calprotectin, a protein released by neutrophils under inflammatory conditions of the gastrointestinal tract. BSB treatment significantly reduced the release of calprotectin and pro-inflammatory cytokines. The findings of the present study demonstrate that BSB has the potential to improve disease activity and rescue colonic tissues from damage by inhibiting oxidative stress, lipid peroxidation and inflammation. The findings are suggestive of the benefits of BSB in IBD treatment and substantiate its usefulness in colitis management, along with its gastroprotective effects in gastric ulcer. Full article

Magnesium potassium phosphate cement (MKPC), a type of chemically bonded phosphate ceramic (CBPC), presents a promising alternative to ordinary Portland cement (OPC). This study focuses on developing sustainable MKPC (sust-MKPC) as a thermally passive material for building applications. A low-grade magnesium oxide (LG-MgO) industrial by-product was utilized to formulate sust-MKPC, with hydrogen peroxide employed as an air-entraining agent (AEA) to induce high porosity and enhance thermal insulation while supporting sustainability goals by reducing energy consumption in climate control systems. Seven formulations incorporating varying hydrogen peroxide contents (0, 1, 2, 3, 5, 7.5, and 10 wt.%) were prepared to evaluate the impact of AEA on the thermal and physicomechanical properties. Comprehensive characterization, including porosity and thermal conductivity measurements, revealed that increasing the AEA content significantly improved thermal inertia and lowered thermal conductivity due to porosity. However, this enhancement was accompanied by a marked reduction in mechanical strength and density, highlighting the trade-off between thermal performance and structural integrity in porous sust-MKPC formulations. Full article

Soybean (Glycine max (L.) Merrill) is highly sensitive to water deficit, particularly during the vegetative phase, when morphological and metabolic plasticity support continued growth and photosynthetic efficiency. We applied eleven water regimes, from full irrigation (W100) to total water withholding (W0), to plants grown under controlled conditions. After 14 days, we quantified morphophysiological, biochemical, leaf optical, gas exchange, and chlorophyll a fluorescence traits. Drought induces significant reductions in leaf area, biomass, pigment pools, and photosynthetic rates (A, g_s, ΦPSII) while increasing the levels of oxidative stress markers (electrolyte leakage, ROS) and proline accumulation. OJIP transients and JIP test metrics revealed reduced electron-transport efficiency and increased energy dissipation for many parameters under severe stress. Principal component analysis (PCA) clearly separated those treatments. PC1 captured growth and water status variation, whereas PC2 reflected photoprotective adjustments. These data show that progressive drought limits carbon assimilation via coordinated diffusive and biochemical constraints and that the accumulation of proline, phenolics, and lignin is associated with osmotic adjustment, antioxidant buffering, and cell wall reinforcement under stress. The combined use of hyperspectral sensors, gas exchange, chlorophyll fluorescence, and multivariate analyses for phenotyping offers a rapid, nondestructive diagnostic tool for assessing drought severity and the possibility of selecting drought-resistant genotypes and phenotypes in a changing stress environment. Full article