Search Results (626)

The rapid detection of organophosphorus (OP) compounds is crucial for safeguarding human health and ensuring food safety. This study presents a novel wearable electrochemical biosensor that integrates miniaturized screen-printed electrodes with wearable devices to achieve real-time, on-site OP detection. The biosensor was fabricated by constructing a screen-printed carbon electrode (SPCE) on a thermoplastic polyurethane (TPU) substrate, sequentially modified with graphene (GR), gold nanoparticles (AuNPs), and organophosphorus hydrolase (OPH), and finally encapsulated with Nafion. This SPCE/GR/AuNPs/OPH/Nafion configuration yields a highly flexible and portable device. The detection principle relies on the enzymatic hydrolysis of methyl paraoxon (MPOX) by OPH, generating p-nitrophenol (PNP), which is quantitatively measured via square wave voltammetry (SWV). The sensor exhibits a broad linear detection range (30–400 μM) with a strong linear correlation (R² = 0.995) and a low detection limit (0.321 μM). It demonstrates excellent selectivity against common interfering substances, including urea, sucrose, and various metal ions. Application to real-world samples such as cabbage and tap water yielded high recoveries (107.2% for cabbage and 101.2% for tap water), with relative standard deviations (RSDs) below 8%. Furthermore, the biosensor maintains robust flexibility and mechanical resilience, with less than 5% signal loss after 100 bending cycles, confirming its suitability for wearable applications and reliable operation under mechanical stress. This innovative, flexible electrochemical biosensor provides a powerful and reliable platform for rapid OP detection, particularly in complex testing environments. Full article

The development of reliable electrochemical interfaces for biosensor applications requires materials that combine high conductivity, large effective surface area, and suitable platforms for biomolecule immobilization. In this work, a hybrid electrochemical platform based on screen-printed carbon electrodes (SPCEs) modified with electropolymerized polypyrrole (PPy) and electrodeposited silver particles (AgPs) is presented for the subsequent immobilization of Ki-67 antibodies. PPy films were synthesized under optimized electrochemical conditions, producing homogeneous, porous, and electrochemically stable coatings that significantly enhanced the doping/undoping processes from 0.3280 C/0.3284 C to 0.3281 C/0.3284 C for SPCE and SPCE-PPy, respectively. Subsequently, silver particles were deposited onto the PPy matrix, resulting in a well-dispersed and uniform distribution of AgPs, promoted by the interaction between Ag⁰ and the nitrogen groups in the polymer backbone. The synergistic combination of PPy and AgPs resulted in improved charge-transfer properties and enhanced electrochemical reversibility, thereby decreasing the peak-to-peak separation of the ferricyanide/ferrocyanide redox couple used as a probe by 40%. Immobilization of Ki-67 antibodies was achieved via direct interaction with AgPs, resulting in a marked passivation effect, as evidenced by the suppression of redox probe signals, confirming successful biofunctionalization. The proposed SPCE-PPy-AgP architecture provides a robust, reproducible, and versatile platform for antibody immobilization, as demonstrated by oxidation and reduction peaks with relative standard deviations (RSDs) of 3.18% and 4.43%, respectively, highlighting its potential for developing label-free electrochemical immunosensors for clinically relevant proliferation biomarkers. Full article

Disruption of the intestinal barrier is a hallmark of inflammatory bowel disease (IBD) and drives both epithelial injury and neutrophil-mediated inflammation, yet rapid, multiplexed assessment of these processes remains an unmet clinical need. Intestinal fatty acid binding protein (iFABP) and fecal calprotectin (FC) provide complementary insights into barrier integrity and mucosal inflammation, but conventional ELISA-based assays are time-consuming, low-throughput, and require large sample volumes. Here, we introduce a dual electrochemical sandwich immunosensor enabling simultaneous quantification of iFABP and FC on screen-printed dual carbon electrodes (SPdCEs). Capture antibodies were immobilized via electrografting of p-aminobenzoic acid diazonium salt, while a V₂O₅/MWCNTs-HRP–streptavidin nanocomposite amplified the electrocatalytic reduction in hydrogen peroxide, enhancing sensitivity. The platform achieved detection limits of 0.01 pg mL⁻¹ (iFABP) and 1 pg mL⁻¹ (FC) with a total assay time of 1 h 20 min and sample volume of just 5 μL, outperforming conventional ELISA in speed and efficiency. High repeatability, reproducibility, and accurate recovery in enriched fecal samples confirmed analytical robustness. By integrating multiplexed detection, nanostructured signal amplification, and robust electrode engineering, this immunosensor provides a rapid, sensitive, and low-volume platform for point-of-care and decentralized monitoring of IBD, enabling timely clinical decision-making and longitudinal patient management. Full article

Electrochemical sensors are user-friendly devices designed for the rapid and straightforward detection of target analytes. Serotonin (5-hydroxytryptamine, 5-HT) is a key neurotransmitter and neuromodulator that regulates diverse neuronal processes. Using a custom-designed screen-printed carbon electrode (SPCE) incorporating ordered mesoporous carbon–bimetal oxides of Cu and Ni (CuO–NiO–OMC), rapid and real-time detection of 5-HT was achieved. The CuO–NiO–OMC structure featured highly active CuO and NiO catalytic sites that effectively promoted the irreversible oxidation of 5-HT (vs. Ag/AgCl reference electrode). The CuO–NiO–OMC/SPCE sensor, connected to a portable potentiostat, exhibited exceptional electrocatalytic performance for the oxidation of 5-HT, with a detection limit of 42.5 nM. The sensitivity was 1.56 A M⁻¹ cm⁻², and the linear dynamic range was 0.0–80.0 µM. The CuO–NiO–OMC/SPCE sensor also demonstrated outstanding selectivity in the presence of competing neurochemicals, including norepinephrine, epinephrine, dopamine, and glutamate, as well as high concentrations of tested biomolecules and inorganic ions. Furthermore, the practicality of the sensor was demonstrated using human serum and urine samples, with recovery percentages ranging from 91.1% to 98.3%. Thus, the CuO–NiO–OMC/SPCE sensor offers an effective approach for 5-HT sensing, thereby permitting molecular-level understanding of brain function. Full article

Candida albicans (C. albicans) is an opportunistic fungal pathogen and a major cause of nosocomial infections, especially in immunocompromised patients. Conventional diagnostic approaches such as blood culture and biochemical assays are accurate but require multi-step sample processing and prolonged turnaround times, limiting their applicability for rapid clinical screening. In the present study, we developed an electrochemical biosensor based on molecularly imprinted polymer (MIP) technology for the rapid and selective detection of intact C. albicans cells. The MIP layer was electropolymerized onto a screen-printed carbon electrode (SPCE), forming selective recognition cavities complementary to the fungal morphology. Electrochemical characterization and detection were performed using cyclic voltammetry in phosphate-buffered saline (PBS). The system demonstrated a wide linear detection range, enabling reliable quantification of C. albicans across concentrations spanning from 1 to 10⁴ CFU/mL and achieved an ultralow limit of detection (LOD) of 1.30 CFU/mL, demonstrating high sensitivity. High selectivity was confirmed against E. coli, S. aureus, and P. aeruginosa, demonstrating that the imprinted cavities effectively distinguish fungal cells from bacterial contaminants. These findings highlight the promise of MIP-based electrochemical biosensors as a simple, low-cost, and portable alternative for early fungal diagnostics. Full article

This study presents a low-cost, small-scale single-chamber microbial fuel cell (MFC) toxicity biosensor fabricated on a printed circuit board (PCB) and a 3D-printed chamber with a volume of 120 μL. The anode consists of a screen-printed carbon electrode on the PCB, while the air cathode is a carbon paper electrode. To address poor adhesion of microorganisms to the smooth anode surface, femtosecond laser processing was used to fabricate a micropore array with 40 μm pores on the electrode. This method can create micropores on the anode surface without damaging the screen-printed electrodes, the PCB substrate, or the pads. These micropores increase the anode’s surface area and hydrophilicity, allowing more microbial coatings to firmly adhere to its surface. In this study, the MFC utilised Rhizobium rosettiformans W3, extracted from activated sludge at a wastewater treatment plant, as the anode microorganism. Its aerobic nature simplifies the design of MFCs, enabling a single-chamber structure and miniaturisation. Using formaldehyde solution as a toxicity sample to test the biosensor’s performance, a 0.1% concentration significantly reduced the sensor’s output power. Full article

Bovine rotavirus (BRV) is one of the leading causes of neonatal diarrhea in calves and remains a major concern in veterinary medicine due to its high morbidity and economic impact. Rapid, sensitive, and cost-effective diagnostic approaches are therefore required for early detection and disease control. In this study, electrochemical immunosensors were developed for the detection of BRV with the aim of improving existing multiplex diagnostic strategies. Screen-printed carbon electrodes (SPEs) were employed as the sensing platform and modified with molybdenum disulfide nanoparticles (MoS₂ NPs) to enhance electrochemical performance. Mouse monoclonal antibodies against the BRV VP6 protein were immobilized onto the electrode surface, followed by blocking with bovine serum albumin. BRV detection was carried out using differential pulse voltammetry, cyclic voltammetry, and electrochemical impedance spectroscopy. To further improve sensitivity, a sandwich immunoassay format was constructed using gold nanoparticle-labeled secondary antibodies. The MoS₂-modified sandwich immunosensor exhibited superior analytical performance, achieving a limit of detection of 1.11 ng/mL, a limit of quantification of 3.72 ng/mL, a relative standard deviation of 1.89% (n = 5), and a linear response with R² = 0.99. The developed immunosensors demonstrated reliable performance in real sample analysis, with a selectivity rate of 100 ± 2.95%. These findings suggest that MoS₂-based electrochemical immunosensors offer a promising platform for rapid and sensitive BRV detection and have potential applications in veterinary diagnostics. Full article

The analytical surveillance of sulfite species (SO₃²⁻, SO₂ and HSO₃⁻) is critical for food safety due to their roles as preservatives and potent allergens. Despite stringent regulations, conventional methods like Monier-Williams distillation remain limited by labor-intensive protocols and matrix interferences. This review elucidates the chemical mechanisms of sulfites in food matrices and critically evaluates recent advancements in electrochemical sensing. A primary focus is placed on delineating physicochemical bottlenecks, such as electrode fouling and cross-reactivity from polyphenols and organic acids, which hinder commercialization. We analyze the strategic integration of nanostructured interfaces—including bimetallic nanoparticles, carbon-based hybrids (rGO/PPy), and nanozymes—to reduce oxidation overpotentials and enhance sensitivity below regulatory thresholds. Furthermore, the transition from laboratory prototypes to decentralized, field-deployable platforms using screen-printed electrodes (SPEs) and smartphone-based potentiostats is explored. By synthesizing technical innovations with “green” analytical principles, this work provides a roadmap for real-time quality control in the food industry, bridging the gap between fundamental electrochemistry and industrial scalability. Full article

Using disposable screen-printed electrodes faces major challenges when attempting to monitor a continuous process, especially in systems where there is pronounced adsorption, fouling, degradation, or in cases of irreversible electrochemical reactions. Methylene Blue (MB) exhibits some therapeutic properties and is commonly used as a redox reporter in DNA sensors, but is also considered a toxic pollutant in aquatic systems. MB demonstrates strong adsorption to carbon materials, which prevents its electroanalytical determination in multiple measurements with a single electrode. Our work details direct electrochemical determination of MB with only the native carbon screen-printed working electrode as sensing material and optimization of the analytical method. In batch mode, we significantly improved sensitivity and interelectrode reproducibility by introducing a prepolarization step, but successive measurements in lower concentrations were not feasible due to strong adsorption. A fully customizable, modular flow cell was 3D printed to allow in operando replacement of the planar screen-printed three-electrode system after measurement during continuous flow. As confirmed by mechanical properties testing, the rigid polyacrylate upper section of the flow cell provides structural stability, combined with a flexible TPU lower section which enables effortless sensor hot swapping and effective sealing during flow. With an optimized hot swapping flow detection method, MB was detected via square wave voltammetry with a sensitivity of 65.59 µA/µM and a calculated LOD of 7.75 nM, which outperforms similar systems from the literature. We envisage this approach can be integrated into low-cost continuous environmental monitoring systems or in-line quality control, especially in flow chemistry synthesis. Full article

This study presents a straightforward process for producing a hybrid ternary composite of silver nanoparticles (Ag NPs), small graphene oxide (s-GO), and zirconia (ZrO₂) and its use as an electrode material for electrochemical sensing. The physico-chemical properties of the ternary composite were analyzed by means of field emission scanning electron microscopy (FE-SEM), ultraviolet-visible (UV-vis) and FTIR spectroscopy, X-ray Photoelectron Spectrometry (XPS) and contact angle (CA) measurements. The synthesized hybrid nanomaterial was employed as an electrode modifier in the fabrication of a modified screen-printed carbon electrode (SPCE) and used for the simultaneous electrochemical sensing of key environmental pollutants such as hydroquinone (HQ) and catechol (CAT). The developed sensor exhibited linearity in the range of 0–100 µM for both HQ and CAT, with sensitivity values of 2640 µA·mM⁻¹·cm⁻² for HQ and 5120 µA·mM⁻¹·cm⁻² for CAT. The limits of detection (LOD) were 1.5 µM for HQ and 0.72 µM for CAT, respectively. The synergistic enhancement of electron transfer kinetics, the increased electroactive surface area, the strong anti-interference capability, and excellent reproducibility and stability establish these modified electrodes as promising candidates for environmental monitoring and real sample analysis. Full article

A highly selective and sensitive compact immunosensing strategy was developed for the determination of DJ-1, a potential biomarker of Parkinson’s disease, one of the leading neurodegenerative disorders, using a portable potentiostat. Initially, screen-printed carbon electrodes (SPCEs) were modified with gold nanoparticles (AuNPs), followed by functionalization with 4-mercapto-1-butanol (MOH). Subsequently, the AuNPs-doped and hydroxyl-functionalized electrodes were treated with 3-glycidoxypropyltrimethoxysilane (GPTMS) to facilitate immobilization of anti-DJ-1 antibodies. Immobilization steps were monitored using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) performed on a bench potentiostat, while the entire analytical performance of the developed biosensor system and its response in artificial cerebrospinal fluid (aCSF) were evaluated by monitoring cathodic current changes with a portable electrochemical reader. The resulting biorecognition element enabled the detection of DJ-1 within the concentration range of 0.001 to 0.3 ng/mL, based on cathodic current changes, achieving a limit of detection as low as 0.00059 ng/mL. Surface morphology and elemental composition alterations were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and energy-dispersive X-ray spectroscopy (EDX). A notable advantage of this GPTMS@AuNPs-based biosensor system is its prolonged storage stability and its capability to accurately quantify DJ-1 in artificial cerebrospinal fluid samples, with recovery rates ranging from 98.66% to 123.3%. Full article

In the present work, a bienzymatic voltammetric biosensor is reported for the simultaneous quantification of glucose and cholesterol in flavored milk samples with a single device. The biosensor is based on a carbon screen printing electrode on which paper disks impregnated with glucose oxidase and cholesterol oxidase, as well as ferricyanide as a mediator, are deposited. Linear voltammetry combined with an artificial neural network methodology were successfully used for the determinations, showing excellent agreement with the spectrophotometric reference method. Full article

Continuous plantar-pressure monitoring is important for objective gait analysis and early detection of abnormal loading; however, many existing solutions remain laboratory-bound (force plates and instrumented walkways) or rely on costly in-shoe multilayer sensor arrays. Here, we developed and optimized a fully screen-printed pressure-sensing insole based on carbon–polymer nanocomposite layers, with an emphasis on manufacturability and process control to bridge the gap between proof-of-concept force-sensitive resistor (FSR)-based insoles and scalable printed-electronics manufacturing workflows. Composite pastes containing carbon fillers (graphene nanoplatelets, carbon black, and graphite) were formulated to improve sensor repeatability and sensitivity. Sensors were characterized under compression loads from 100 N to 1300 N, showing a sensitivity of 10.5 ± 2.8 Ω per 100 N and a sheet-to-sheet coefficient of variation of 22.1% in resistance response. The effects of paste composition, screen mesh density, electrode layout, and lamination on sensitivity and repeatability were systematically evaluated. In addition, correlation analysis of resistance values from integrated quality-control meanders proved useful for monitoring screen-printing process stability. The final insole integrates printed carbon sensing pads and contacts, a dielectric spacer, and an adhesive layer in a thin, flexible format suitable for integration with wearable electronics. In practical static-load tests, repeated manual placement of weights yielded coefficients of variation as low as 4% at 500 g and a detection limit of ~0.1 N, comparable to a very light finger touch. These results demonstrate that low-cost screen-printed electronics can provide robust pressure sensing for wearable plantar-pressure monitoring. Full article

The rapid, field-ready detection of methamphetamine (MET) directly in sewage under flow remains a bottleneck for public health and law enforcement surveillance. We engineered a low-cost, 3D-printed flow-through electrochemical cell that houses a commercial screen-printed carbon electrode and operates in both non-flow and flow regimes. The platform was validated using the [Ru(NH₃)₆]^3+/2+ couple, confirming negligible kinetic hindrance and suitability for voltammetric sensing under convective transport. Using square wave voltammetry and chronoamperometry, MET was quantified in filtered wastewater, with limits of detection of 15.9 µg L⁻¹ in non-flow and 211.2 µg L⁻¹ in flow conditions. Specificity tests yielded well-separated faradaic responses for the pre precursor α-phenylacetoacetonitrile (APAAN) and for MET, while amphetamine produced only a weak signal, enabling side-by-side discrimination in a single run. To our knowledge, this is the first demonstration of direct electrochemical sensing of MET in flowing wastewater using a 3D-printed flow-through platform. The simple, disposable design provides an actionable foundation for portable, near-real-time sewer surveillance and motivates antifouling/auto-cleaning strategies for long-term deployment. Full article

Benzisothiazolinone (BIT) is a commonly used biocide in water-based products, which can enter the environment from household and personal care products, as well as from leaching off building facades and roofs due to rainfall, eventually reaching rivers through stormwater runoff and raising ecological concerns due to its high aquatic toxicity. Detecting benzisothiazolinone, particularly in the environment is crucial due to health and regulatory requirements. This study explores electrochemical techniques and conductive nanomaterials for detecting BIT in environmental samples. Carbon- and gold-based screen-printed electrodes (SPEs) with distinct morphologies were investigated: carbon electrodes as nanoparticles (SPE-C) and single-wall carbon nanotubes (SPE-SWCNTs), and gold electrodes as nanoparticles (SPE-Au-BT) and thin films (SPE-Au-AT). Cyclic voltammetry and square-wave voltammetry (SWV) were optimized, with SWV demonstrating superior sensitivity—showing a two-order improvement with carbon-based electrodes and a 30-fold enhancement with gold-based electrodes. The lowest detection limits were 40 nM for carbon and 80 nM for gold nanoparticle-based electrodes. SPE-C achieved good recovery in river water, confirming its effectiveness for BIT monitoring with minimal interference from common ions or saccharin. These sensors can be easily used for everyday detection and monitoring of BIT in river water, ensuring a screening programme that supports the development of adequate regulatory guidelines. Full article