Search Results (58)

The flotation performance of a low-grade, polymetallic copper ore, dominated by chalcocite and transitional copper phases, was investigated to assess the interplay between collector chemistry, gangue mineralogy, and entrainment. QEMSCAN analysis identified chalcocite as the main copper host (62%), with minor covellite and bornite, and gangue, predominantly quartz (94%), with variable muscovite (up to 50%). Chalcocite was moderately liberated (100–200 µm), while secondary copper phases showed low exposure and strong gangue association, challenging selective recovery. Baseline flotation with potassium amyl xanthate (PAX) and sodium isobutyl xanthate (SIBX) across pH and dosage ranges showed that PAX yielded higher copper recovery but lower grade, indicating unselective gangue entrainment; SIBX offered lower recovery but higher grade, reflecting superior selectivity. Controlled muscovite doping experiments (10–50 wt.%) were employed to decouple gangue-driven selectivity loss from collector-specific interactions. Results indicate a collector-dependent sensitivity to gangue loading: PAX exhibited a pronounced decline in both copper recovery (82%–67%) and grade under increasing muscovite content, with water recovery rising by approximately 32%, whereas SIBX showed more gradual performance degradation and lower entrainment (15% increase in water recovery), highlighting its resilience in gangue-rich systems. UV-Vis and zeta potential (electrokinetic) measurements confirmed stronger PAX adsorption, consistent with its longer hydrocarbon chain, while flotation trends demonstrated a shift from true flotation-dominated recovery to entrainment-dominated regimes at high muscovite levels, particularly for PAX. This framework links mineralogy, collector chemistry, and gangue entrainment, guiding optimization of circuits for ores like Mt. Gunson while enhancing critical metal recovery, including cobalt. Full article

Conventional powdered biochar encounters severe bottlenecks in practical water treatment, such as difficult separation, easy loss, and potential secondary pollution. This work aimed to develop recyclable and high-performance adsorbents by preparing iron-doped biochar/sodium alginate composite microspheres (BC/MBC500-ALF) through Fe³⁺ cross-linking. Using corn stalk biochar and KMnO₄-modified biochar as adsorbent components and sodium alginate (SA) as a green shaping matrix, SA formed a stable egg-box hydrogel network to convert powdered biochar into uniform microspheres. Batch adsorption experiments revealed that the optimal pH for oxytetracycline (OTC) adsorption was 9, with adsorption capacities of 136.28 mg/g for BC500-ALF and 182.91 mg/g for MBC500-ALF. Kinetic analysis showed that BC500-ALF followed pseudo-first-order kinetics (R² = 0.983) dominated by physisorption, while MBC500-ALF fitted pseudo-second-order kinetics (R² = 0.994) dominated by chemisorption. The maximum Langmuir adsorption capacities at 308 K were 220.75 mg/g and 495.05 mg/g, respectively. Thermodynamic parameters confirmed a spontaneous and endothermic process. The adsorption mechanisms involved hydrogen bonding, π–π stacking, electrostatic attraction, metal-bridging complexation, and Fe–Mn oxide-mediated redox reactions. SA exerted dual functions in structure stabilization and adsorption enhancement. This composite provides an efficient and eco-friendly approach for tetracycline antibiotic pollution control in aqueous environments. Full article

Synthetic dyes frequently persist through conventional wastewater treatment, motivating the use of advanced oxidation processes capable of breaking down these stable molecules. Metal-doped carbon dots (CDs) offer a tuneable platform for catalytic dye degradation in water, although their performance varies strongly with operating conditions. The aim of this work was to determine how temperature, H₂O₂ dosage, and pH influence the catalytic behaviour of Fe-, Cu-, Zn-, and Mg-doped CDs during the degradation of methylene blue (MB) and rhodamine B (RB), optimised using a Taguchi L27 orthogonal array design. Temperature and oxidant loading were the dominant factors: higher temperatures accelerated reactions through Arrhenius-type kinetics, while increasing H₂O₂ availability improved removal until excessive levels began to suppress •OH generation. Across all condition sets, apparent rate constants spanned 7.0 × 10⁻⁴–2.65 × 10⁻² min⁻¹, with t₅₀ values of 26–217 min and t₉₀ extending from ~86 min to >700 min; final decolourisation ranged from ~17% to nearly 100%. pH played a secondary role, mainly affecting dye speciation and surface adsorption. Dopant identity shifted the optimum operating region for each catalyst: Fe- and Cu-CDs achieved complete or near-complete removal of both dyes at pH 7 and 50 °C with relatively low H₂O₂ dosage (0.5–1.0 mL); Zn-CDs reached equivalent performance at pH 7 and 25 °C but required higher oxidant loading (1.5 mL of H₂O₂), reflecting their photo-induced rather than thermally driven activation mechanism; Mg-CDs performed comparably under the same conditions as Fe- and Cu-CDs. The resulting condition–catalyst map highlights the operating regimes that maximise efficiency while minimising chemical input, providing a practical framework for selecting carbon-dot-based catalysts for water treatment applications. Full article

The thermoelectric (TE) performance of iron silicide (β-FeSi₂) can be enhanced by introducing metal dopants. However, such doping often leads to the emergence of secondary phases, which negatively affect the Seebeck coefficient and overall TE efficiency. Consequently, it is crucial to understand the phase transitions involved and how they influence the transport properties in order to optimize the material’s performance. This work investigates the influence of Mn-doping on the phase change and properties of p-type β-Fe_1−xMn_xSi₂. The findings show that the semiconducting β-phase decreases sharply when x ≥ 0.09, indicating that the optimal doping concentration lies below this level. As a result, the maximum power factor of 970 μW m⁻¹ K⁻² and a dimensionless figure of merit (ZT) value of 0.12 are achieved at x = 0.03. This study clarifies how the phase composition relates to the thermoelectric properties of p-type β-FeSi₂. Full article

Transition metal (TM)-doped zinc oxide (ZnO) and zirconium dioxide (ZrO₂) nanocrystals exhibit complex correlations between crystal structure, defect chemistry, vibrational properties, and magnetic behavior that are strongly governed by synthesis route and dopant incorporation mechanisms. This review critically summarizes recent progress on Fe-, Mn-, and Co-doped ZnO and ZrO₂ nanocrystals synthesized by wet chemical, hydrothermal, and microwave-assisted hydrothermal methods, with emphasis on synthesis-driven phase evolution and apparent solubility limits. ZnO and ZrO₂ are treated as complementary host lattices: ZnO is a semiconducting, piezoelectric oxide with narrow solubility limits for most 3d dopants, while ZrO₂ is a dielectric, polymorphic oxide in which transition metal doping may stabilize tetragonal or cubic phases. Structural and microstructural studies using X-ray diffraction, electron microscopy, Raman spectroscopy, and Mössbauer spectroscopy demonstrate that at low dopant concentrations, TM ions may be partially incorporated into the host lattice, giving rise to diluted or defect-mediated magnetic behavior. When solubility limits are exceeded, nanoscopic secondary oxide phases emerge, leading to superparamagnetic, ferrimagnetic, or spin-glass-like responses. Magnetic measurements, including DC magnetization and AC susceptibility, reveal a continuous evolution from paramagnetism in lightly doped samples to dynamic magnetic states characteristic of nanoscale magnetic entities. Vibrational spectroscopy highlights phonon confinement, surface optical phonons, and disorder-activated modes that sensitively reflect nanocrystal size, lattice strain, and defect populations, and often correlate with magnetic dynamics. Rather than classifying these materials as diluted magnetic semiconductors, this review adopts a synthesis-driven and correlation-based framework that links dopant incorporation, local structural disorder, vibrational fingerprints, and magnetic response. By emphasizing multi-technique characterization strategies required to distinguish intrinsic from extrinsic magnetic contributions, this review provides practical guidelines for interpreting magnetism in TM-doped oxide nanocrystals and outlines implications for applications in photocatalysis, sensing, biomedicine, and electromagnetic interference (EMI) shielding. Full article

Hydrogen energy has been recognized as the most promising secondary energy source due to high energy density, abundance, and environmental friendliness. Among hydrogen production techniques, water electrolysis has emerged as a key research focus, owing to its high efficiency, operational simplicity, controllability, and pollution-free nature. However, the anodic oxygen evolution reaction (OER) involves a high overpotential and sluggish kinetics, which severely constrain the overall efficiency of water electrolysis. Transition metal oxide (TMO) catalysts are regarded as promising substitutes for noble-metal-based catalysts, given their advantages of low cost, elemental abundance, tunable electronic structures, and favorable stability. This review systematically elaborates on the reaction mechanisms of TMO catalysts, including the adsorbate evolution mechanism (AEM) and lattice oxygen mechanism (LOM), and summarizes various performance-enhancement strategies, such as morphology control, doping engineering, support engineering, and heterostructure construction. Furthermore, it outlines current challenges and future research directions, covering precise synthesis and structural control, identification of active sites and mechanistic elucidation, and stability and degradation issues, as well as multifunctional applications and broad-pH-range adaptability. The aim is to offer theoretical guidance and technical insights for designing and developing high-performance TMO electrocatalysts. Full article

This work investigates the laser-based solid-phase crystallization of wet-chemically deposited BZY (yttrium doped barium zirconate) thin films on metallic substrates. For this purpose, amorphous BZY thin films are deposited on nickel-based alloy substrates using spin coating and are then annealed using laser radiation. Different laser intensities and scanning velocities are investigated. X-ray diffraction analysis of the processed thin films shows an initial increase in crystallinity with increasing laser intensity. A further increase in laser intensity leads to the formation of secondary phases and ultimately to the melting of the substrate material. Complete crystallization of the thin films without the formation of secondary phases is achieved by applying scanning velocities of $v_S$ ≥ 500 mm/s. Scanning electron microscopy images of selected samples show that, especially at higher scanning velocities, crack formation can occur as a result of the annealing. In summary, laser annealing is a promising approach for the thermal post-treatment of BZY thin films in applications in metal-supported solid oxide fuel cells. Full article

Rechargeable aqueous Zn-MnO₂ batteries are positioned as a highly promising candidate for next-generation energy storage, owing to their compelling combination of economic viability, inherent safety, exceptional capacity (with a theoretical value of ≈308 mAh·g⁻¹), and eco-sustainability. However, this system still faces multiple critical challenges that hinder its practical application, primarily including the ambiguous energy storage reaction mechanism (e.g., unresolved debates on core issues such as ion transport pathways and phase transition kinetics), dendrite growth and side reactions (e.g., the hydrogen evolution reaction and corrosion reaction) on the metallic Zn anode, inadequate intrinsic electrical conductivity of MnO₂ cathodes (≈10⁻⁵ S·cm⁻¹), active material dissolution, and structural collapse. This review begins by systematically summarizing the prevailing theoretical models that describe the energy storage reactions in Zn-Mn batteries, categorizing them into the Zn²⁺ insertion/extraction model, the conversion reaction involving MnO_x dissolution–deposition, and the hybrid mechanism of H⁺/Zn²⁺ co-intercalation. Subsequently, we present a comprehensive discussion on Zn anode protection strategies, such as surface protective layer construction, 3D structure design, and electrolyte additive regulation. Furthermore, we focus on analyzing the performance optimization strategies for MnO₂ cathodes, covering key pathways including metal ion doping (e.g., introduction of heteroions such as Al³⁺ and Ni²⁺), defect engineering (oxygen vacancy/cation vacancy regulation), structural topology optimization (layered/tunnel-type structure design), and composite modification with high-conductivity substrates (e.g., carbon nanotubes and graphene). Therefore, this review aims to establish a theoretical foundation and offer practical guidance for advancing both fundamental research and practical engineering of Zn-manganese oxide secondary batteries. Full article

Waste drilling fluids represent a complex gel–colloidal system containing structurally stable polymeric networks and heavy-metal ions that can cause tremendous damage to the ecosystem. The current disposal methods, like solidification/landfills, formation reinjection, and chemical treatment, commonly suffer from high secondary pollution risks, poor resource recovery, and incomplete detoxification. This paper developed a photocatalytic approach to complex gel system treatment by hydrothermally synthesizing a novel sulfur-doped, oxygen-vacancy-modified 3D flower-like xS-BiOBr_0.5Cl_0.5 structure which effectively narrowed the bandgap of BiOX and thus significantly enhanced its catalytic activity. The chemical composition, morphology, specific surface areas, and bandgaps of the materials were characterized. The photocatalytic performance and cyclic stability of the materials were measured, and 0.5S-BiOBr_0.5Cl_0.5 showed the best photocatalytic performance. The rhodamine B(RhB) degradation and polymer degradation efficiencies of 0.5S-BiOBr_0.5Cl_0.5 were up to 91% and 79%, respectively, while the Hg(II), Cr(VI), and Cr(III) reduction efficiencies of the material were up to 48.10%, 96.58%, and 96.41%, respectively. The photocatalytic mechanism of the xS-BiOBr_0.5Cl_0.5 materials was evaluated through an oxygen vacancy analysis, active species capture experiments, and density functional theory (DFT) computations. Overall, the xS-BiOBr_0.5Cl_0.5 materials can provide a low-cost and harmless treatment method for waste drilling fluids and promote the “green” development of oil and gas. Full article

Mechanical alloying (MA) has been proven to be an energy-efficient synthetic route for the development of high-performance thermoelectric (TE) materials. Higher Manganese Silicide (HMS) phases of the general formula Mn(Si_1−xAl_x)_1.75 (0 ≤ x ≤ 0.05) were prepared by MA implementing a short-time ball-milling process. Powder XRD and SEM analysis were carried out to validate the HMS phases, while small amounts of the secondary phase, MnSi, were also identified, especially for the Al-doped products. Electrical transport properties measurements showed that Al substitution causes an effective hole doping. A remarkable increase in electrical conductivity is observed for the Al-doped phases, while the corresponding reduction in the Seebeck coefficient is indicative of the increase in carrier density. Despite the small percentages of MnSi detected in Al-doped phases, an improvement in TE efficiency is achieved in the series Mn(Si_1−xAl_x)_1.75 (0 ≤ x ≤ 0.05). The 2.5% Al-doped phase exhibits a maximum figure-of-merit (ZT) of 0.43 at 773 K. Moreover, in an effort to utilize recycled silicon byproducts from photovoltaic (PV) manufacturing, Al-doped phases are developed by MA using two types of Si kerf. The two kerf-based products exhibit lower TE efficiencies, due to the increased amounts of the metallic MnSi phase. Full article

Degradable fluorescent sensors present a promising portable approach for heavy metal ion detection, aiming to prevent secondary environmental pollution. Additionally, the excessive intake of ferric ions (Fe³⁺), an essential trace element for human health, poses critical health risks that urgently require effective monitoring. In this study, we developed a thermally degradable fluorescent hydrogel sensor (Eu-CDs@DPPG) based on europium-doped carbon dots (Eu-CDs). The Eu-CDs, synthesized via a hydrothermal method, exhibited selective fluorescence quenching by Fe³⁺ through the inner filter effect (IFE). Embedding Eu-CDs into the hydrogel significantly enhanced their stability and dispersibility in aqueous environments, effectively resolving issues related to aggregation and matrix interference in traditional sensing methods. The developed sensor demonstrated a broad linear detection range (0–2.5 µM), an extremely low detection limit (1.25 nM), and rapid response (<40 s). Furthermore, a smartphone-assisted LAB color analysis allowed portable, visual quantification of Fe³⁺ with a practical LOD of 6.588 nM. Importantly, the hydrogel was thermally degradable at 80 °C, thus minimizing environmental impact. The sensor’s practical applicability was validated by accurately detecting Fe³⁺ in spinach and human urine samples, achieving recoveries of 98.7–108.0% with low relative standard deviations. This work provides an efficient, portable, and sustainable sensing platform that overcomes the limitations inherent in conventional analytical methods. Full article

The discharge of oily wastewater threatens the ecosystem and human health, and the efficient treatment of oily wastewater is confronted with problems of high mass transfer resistance at the oil-water-solid multiphase interface, significant light shielding effect, and easy deactivation of photocatalysts. Although traditional physical separation methods avoid secondary pollution by chemicals and can effectively separate floating oil and dispersed oil, they are ineffective in removing emulsified oil with small particle sizes. To address these complex challenges, photocatalytic technology and photocatalysis-based improved technologies have emerged, offering significant application prospects in degrading organic pollutants in oily wastewater as an environmentally friendly oxidation technology. In this paper, the degradation mechanism, kinetic mechanism, and limitations of conventional photocatalysis technology are briefly discussed. Subsequently, the surface interface modulation functions of metal doping and heterojunction energy band engineering, along with their applications in enhancing the light absorption range and carrier separation efficiency, are reviewed. Focus on typical studies on the separation and degradation of aqueous and oily phases using photocatalytic membrane technology, and illustrate the advantages and mechanisms of photocatalysts loaded on the membranes. Finally, other new approaches and converging technologies in the field are outlined, and the challenges and prospects for the future treatment of oily wastewater are presented. Full article

Due to its persistence and potential negative effects on ecosystems and human health, microplastic pollution in aquatic environments has become a major worldwide concern. Photocatalytic degradation is a sustainable manner to degrade microplastics to non-toxic by-products. In this review, comprehensive discussion focuses on the synergistic effects of various photocatalytic materials including TiO₂, ZnO, WO₃, graphene oxide, and metal–organic frameworks for producing heterojunctions and involving multidimensional nanostructures. Such mechanisms can include the generation of reactive oxygen species and polymer chain scission, which can lead to microplastic breakdown and mineralization. The advancements of material modifications in the (nano)structure of photocatalysts, doping, and heterojunction formation methods to promote UV and visible light-driven photocatalytic activity is discussed in this paper. Reactor designs, operational parameters, and scalability for practical applications are also reviewed. Photocatalytic systems have shown a lot of development but are hampered by shortcomings which include a lack of complete mineralization and production of intermediary secondary products; variability in performance due to the fluctuation in the intensity of solar light, limited UV light, and environmental conditions such as weather and the diurnal cycle. Future research involving multifunctional, environmentally benign photocatalytic techniques—e.g., doped composites or composite-based catalysts that involve adsorption, photocatalysis, and magnetic retrieval—are proposed to focus on the mechanism of utilizing light effectively and the environmental safety, which are necessary for successful operational and industrial-scale remediation. Full article

This study focuses on the structural and electrochemical behavior of the compound ZnLaFeO₄ as a negative electrode material for nickel–metal hydride (Ni-MH) batteries. The material was synthesized by a sol–gel hydrothermal method to assess the influence of lanthanum doping on the ZnFe₂O₄ spinel structure. X-ray diffraction revealed the formation of a dominant LaFeO₃ perovskite phase, with ZnFe₂O₄ and La₂O₃ as secondary phases. SEM analysis showed agglomerated grains with an irregular morphology. Electrochemical characterization at room temperature and a discharge rate of C/10 (full charge in 10 h) revealed a maximum discharge capacity of 106 mAhg⁻¹. Although La³⁺ doping modified the microstructure and slowed the activation process, the electrode exhibited stable cycling with moderate polarization behavior. The decrease in capacity during cycling is due mainly to higher internal resistance. These results highlight the potential and limitations of La-doped spinel ferrites as alternative negative electrodes for Ni-MH systems. Full article

Introducing magnetic dopants into topological insulators (TIs) provides a pathway to realizing novel quantum phenomena, including the quantum anomalous Hall effect (QAHE) and axionic states. One of the most commonly used $3d$ transition metal dopants is Mn, despite its known tendency to be highly mobile and to cause phase segregation. In this study, we present a detailed magnetotransport investigation of Mn-overdoped Bi₂Te₃ thin films using field-effect transistor architectures. Building on our previous structural investigations of these samples, we examine how high Mn content influences their electronic transport properties. From our earlier studies, we know that high Mn doping concentrations lead to the formation of secondary phases, which significantly alter weak antilocalization behavior and suppress topological surface transport. To probe the gate response of these doped films over extended areas, we fabricate field-effect transistor structures, and we observe uniform electrostatic control of conduction across the magnetic phase. Inspired by recent developments in intrinsic topological systems such as the MnTe-Bi₂Te₃ septuple-layer compounds, we explore the influence of embedded ferromagnetic chalcogenide inclusions as an alternative route to engineer magnetic topological states and potentially expand the operational temperature range of QAHE-enabled devices. Full article