Search Results (4,734)

With the increasing demand for urban rail transit capacity, shield tunneling has become the predominant method for constructing underground metro systems in densely populated cities. However, the spatial interaction between shield tunnels and adjacent retaining structures poses significant engineering challenges, potentially leading to excessive ground settlement, structural deformation, and even stability failure. This study systematically investigates the deformation behavior and associated risks of retaining systems during adjacent shield tunnel construction. An orthogonal multi-factor analysis was conducted to evaluate the effects of grouting pressure, grout stiffness, and overlying soil properties on maximum surface settlement. Results show that soil cohesion and grouting pressure are the most influential parameters, jointly accounting for over 72% of the variance in settlement response. Based on the numerical findings, a Bayesian network model was developed to assess construction risk, integrating expert judgment and field monitoring data to quantify the conditional probability of deformation-induced failure. The model identifies key risk sources such as geological variability, groundwater instability, shield steering correction, segmental lining quality, and site construction management. Furthermore, the effectiveness and cost-efficiency of various grouting reinforcement strategies were evaluated. The results show that top grouting increases the reinforcement efficiency to 34.7%, offering the best performance in terms of both settlement control and economic benefit. Sidewall grouting yields an efficiency of approximately 30.2%, while invert grouting shows limited effectiveness, with an efficiency of only 11.6%, making it the least favorable option in terms of both technical and economic considerations. This research provides both practical guidance and theoretical insight for risk-informed shield tunneling design and management in complex urban environments. Full article

The ecological interface between grasslands and farmlands forms a critical landscape component, significantly contributing to the stability and functioning of ecosystems within the agro-pastoral transition zone of northern China. Nevertheless, the variation patterns and interactions between soil physicochemical attributes and microbial community diversity at this interface remain poorly understood. In this study, we investigated nine sites located within 50 m of the grassland–farmland boundary in the Songnen Plain, northeastern China. We assessed the soil’s physicochemical properties and the composition of bacterial and fungal communities across these sites. Results indicated a declining gradient in soil physicochemical characteristics from grassland to farmland, except for pH and total phosphorus (TP). The composition of bacterial and fungal communities differed notably in response to contrasting land-use types across the ecological interface. Soil environmental variables were closely aligned with shifts observed in bacterial and fungal assemblages. Concentrations of total nitrogen (TN), available phosphorus (AP), alkali-hydrolyzable nitrogen (AN), and available potassium (AK) exhibited inverse correlations with both bacterial and fungal populations. Alterations in microbial community composition were significantly linked to TN, TP, total potassium (TK), AN, AP, AK, and soil pH levels. Variability in soil properties, as well as microbial biomass and diversity, was evident across the grassland–cropland boundary. Long-term utilization and conversion of grassland into cultivated land altered the soil’s physicochemical environment, thereby indirectly shaping the structure of microbial communities, including both bacteria and fungi. These findings provide a valuable basis for understanding the ecological implications of land-use transitions and inform microbial-based indicators for assessing soil health in agro-pastoral ecotones. Full article

Global climate change has intensified the frequency, intensity, and spatial heterogeneity of drought events, posing severe threats to the stability of terrestrial ecosystems. Plant drought resilience, which encompasses a plant’s capacity for drought resistance, post-stress recovery, and long-term adaptation and transformation to sustain ecosystem functionality, has emerged as a central focus in botanical and ecological research. This review synthesizes the conceptual evolution of plant drought resilience, from early emphasis on resistance and recovery to the current multi-dimensional framework integrating adaptation and transformation, and synthesizes advances in understanding multi-scale drought resilience in terrestrial plants—spanning molecular, physiological, individual, community, and ecosystem levels. Key mechanisms include molecular/physiological adaptations (osmotic adjustment, antioxidant defense, hydraulic regulation, carbon–water reallocation via gene networks and aquaporins), morpho-anatomical traits (root architectural plasticity, leaf structural modifications, and hydraulic vulnerability segmentation), community/ecosystem drivers (biodiversity effects, microbial symbioses, and soil–plant–feedback dynamics). We critically evaluate quantitative metrics and expose critical gaps, including neglect of stress legacy effects, oversimplified spatiotemporal heterogeneity, and limited integration of concurrent stressors. Future research should prioritize multi-scale and multi-dimensional integrated analysis, long-term multi-scenario simulations with field validation, and harnessing plant–microbe interactions to enhance drought resilience, providing a theoretical basis for ecosystem sustainability and agricultural production under climate change. Full article

This study aims to develop environmentally friendly soil-stabilization materials by investigating the synergistic enhancement mechanism of industrial by-product lignin fibers (LFs) and sodium sulfate (Na₂SO₄) on the mechanical and micro-structural properties of cement-stabilized soil. A systematic evaluation was conducted through unconfined compressive strength (UCS), splitting tensile strength, and capillary water absorption tests, supplemented by microscopic analyses including XRD and SEM. The results indicate that the optimal synergistic effect occurs at 1.0% LF and 0.10% Na₂SO₄, which increases UCS and splitting tensile strength by 9.23% and 18.37%, respectively, compared to cement-stabilized soil. Meanwhile, early strength development is accelerated. Microscopically, LF physically bridges soil particles, forming aggregates, reducing porosity, and enhancing cohesion. Chemically, Na₂SO₄ acts as an activator, accelerating cement hydration and stimulating pozzolanic reactions to form calcium aluminosilicate hydrate and gypsum, which fill pores and densify the matrix. The synergistic mechanism lies in Na₂SO₄ enhancing the interaction between the LFs and clay minerals through ion exchange, facilitating the formation of a stable spatial network structure that inhibits particle sliding and crack propagation. This technology offers substantial sustainability benefits by utilizing paper-making waste LF and low-cost Na₂SO₄ to improve soil strength, toughness, and impermeability. Full article

The dataset presented in this manuscript consists of three distinct sets of data collected during a laboratory experiment aimed at quantifying the emissions of greenhouse gases (GHGs), specifically methane (CH₄), carbon dioxide (CO₂), and nitrous oxide (N₂O). The experiment was conducted in three phases, each initiated at different times. The first phase began on 6 June 2022, using a biocover composed of 60% fine-fraction waste, 20% clay soil, and 20% stabilized compost. The second phase commenced on 26 August 2022, with two biocover variants: one composed of 50% fine-fraction waste and 50% clay soil, and the other consisting of 40% fine-fraction waste, 40% clay soil, and 20% shredded paper. The final phase started on 27 October 2022, introducing two biocovers: one containing 25% dried algae, 25% fine-fraction waste, 25% gravel (0–20 mm), and 25% ash, and the other composed of 40% fine-fraction waste, 40% dried algae, and 20% chernozem. Emission assessments were conducted three weeks after the biocover installation to allow for settling and stabilization, followed by weekly measurements two to three days before irrigation with 250 mL of water to simulate field conditions. GHG emission quantification was carried out using the Cavity Ring-Down Spectroscopy gas measurement device, Picarro G2508. This dataset offers substantial scientific value for advancing biocover technologies aimed at reducing GHG emissions in landfill environments, particularly for mitigating methane emissions. In addition to initial experimental use, the dataset offers a wide range of possibilities for reuse, including modeling landfill gas emissions, validating gas flow measurement methods, developing machine learning models, and performing meta-analyses. Its detailed structure facilitates multi-faceted environmental research and supports optimization of landfill management. Full article

Manure-derived biochar is a promising soil amendment, though its effectiveness is often constrained by limited structural stability and inconsistent nutrient retention. This study evaluated how the pyrolysis method (pre- vs. post-pyrolysis) and rate (5%, 10%, 20%, and 30% w/w) of bentonite incorporation influence the physicochemical properties, nutrient availability, and carbon stability of manure-derived biochar. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analyses revealed that pre-pyrolysis addition enhanced mineral integration, with silicon and aluminum contents increasing by up to 500% and 600%, respectively, while carbon content decreased by up to 34%. Water holding capacity (WHC) improved by approximately 102% with 5–10% bentonite, and carbon stability more than doubled (≥100% increase) at moderate application rates under pre-pyrolysis treatment. However, nitrate (NO₃⁻) and potassium (K) availability declined by up to 89% and 47%, respectively, in pre-pyrolysis treatments due to strong nutrient immobilization. In contrast, post-pyrolysis bentonite addition increased NO₃⁻ by ~44% and K by ~29%, while phosphorus (P) availability rose by 133% at 30% bentonite. Principal component analysis (PCA) showed a clear distinction between pre- and post-pyrolysis bentonite-treated biochar. Pre-pyrolysis treatments were linked to higher pH, WHC, and carbon stability, while post-pyrolysis treatments were associated with greater nutrient availability (e.g., NO₃⁻, and K levels) and higher EC. These findings underscore the importance of the pyrolysis method, showing that pre-pyrolysis bentonite incorporation strengthens biochar’s structural integrity and long-term carbon sequestration potential, whereas post-pyrolysis addition enhances immediate nutrient availability. This duality enables the development of targeted biochar formulations tailored to specific agronomic needs—whether for sustained soil improvement or rapid fertility enhancement in climate-smart and sustainable land management systems. Full article

This study examined the effect of sulfur, ethylenediaminetetraacetic acid (EDTA), olive mill wastewater (OMW), and their mixtures in remediating metal-polluted soils by implementing both leaching trials and a greenhouse experiment with sunflower (Helianthus annuus). In the leaching study, soils were subjected to five discharge volumes (V1–V5). EDTA significantly improved metal mobility of Cd (221.4) mg·kg⁻¹ in V2, Pb (340.8) mg·kg⁻¹ in V3, and Zn (1.01) mg·kg⁻¹ in V3, while OMW moderately mobilized Cd and Mn. However, sulfur mitigated leaching by buffering soil pH and metal immobilization. Mixed treatments revealed moderate leaching behavior. EDTA lowered soil pH (5.3) and raised EC (1763) µS/cm, while sulfur maintained stable chemical environments. In the greenhouse experiment, amendments significantly influenced biomass and metal uptake. Sunflower roots accumulated the highest Cd under sulfur (733.5) mg·kg⁻¹ and Mn under EDTA (743.3) mg·kg⁻¹. EDTA restricted Cd translocation (TF = 0), while OMW enhanced Cr movement to shoots (TF = 17.6). EDTA also reduced Cd bioavailability, whereas OMW raised Pb and Mn availability. Overall, EDTA improved metal solubility for potential removal and sulfur in stabilized metals, while OMW acted as a moderate mobilizer. Sunflower demonstrated selective metal uptake, indicating its potential in phytoremediation strategies tailored to specific contaminants. Full article

Boron (B) is a crucial micronutrient for the initial formation, development, and final quality of fruits, as it affects their physical and chemical properties and helps prevent various functional disorders. Recently, numerous physiological disorders in fruits have been reported, which have been linked to B deficiency. However, there is still uncertainty about whether these issues are directly related to B, other nutrients, their combinations, or environmental conditions. This review aims to compile current and accurate information on how B is absorbed by plants, its role in the cell wall and membrane, its impact on flowering and fruit set, and its influence on physical and chemical properties, as well as its role in preventing physiological disorders. This review examines the latest studies on B published in major scientific journals (Elsevier, Springer, MDPI, Frontiers, Hindawi, Wiley, and SciELO). Boron is mobile in the xylem and slightly mobile in the phloem, and it plays a crucial role in pollination and fruit set. It reduces mass loss, maintains firmness, improves color, and results in larger, heavier fruits. Also, boron increases soluble solids, regulates total titratable acidity and pH, decreases respiration rate, and stabilizes ascorbic acid by delaying its breakdown. It also helps prevent disorders such as splitting, cork spots, internal rot, shot berry in grapes, blossom end rot, and segment drying in citrus. Foliar or soil application of B enhances fruit yield and post-harvest quality. Full article

Surfactant-enhanced remediation is a promising approach for treating petroleum-contaminated soils, particularly in areas where conventional methods are limited by environmental constraints. This study investigates the application of Tween 80, a non-ionic surfactant, for remediating diesel-contaminated Albic Podzolic soils typical of boreal regions. Laboratory experiments were conducted over 90 days, using two surfactant concentrations (3.0 × 10⁻⁴ and 1.5 × 10⁻⁴ mol L⁻¹) and two temperature regimes (22–24 °C and 2–3 °C), simulating seasonal variability in cold-climate contaminated sites. The lower Tween 80 concentration—below the critical micelle concentration—proved more effective, achieving up to 21% total petroleum hydrocarbon (TPH) reduction at ambient temperature and 17% under refrigerated conditions. Treated soils also exhibited pH neutralization, indicating improved chemical stability. Acute toxicity bioassays (Vibrio fischeri and Ceriodaphnia affinis) confirmed the environmental safety of the applied concentrations (≤0.3 mol L⁻¹). These results support the practical use of Tween 80 in the remediation of petroleum-contaminated soils under boreal constraints, providing transferable data for designing safe and efficient field-scale treatment strategies. This work also offers insights that are relevant to remediation policies in cold climates and to the adaptation of surfactant-assisted technologies for diverse field conditions. Full article

The Zigui Basin, located in the Three Gorges Reservoir Area, has developed numerous landslides due to its interlayering of sandstone and mudstone, geological structure, and reservoir operations. This study identifies a fourth type of landslide failure mode: an oblique-dip slope wedge (OdSW) landslide, based on the Wanshuitian landslide. Following four heavy rainfall events from 3 to 13 July 2024, this landslide exhibited significant deformation on the 17th and was completely destroyed within 40 min. The dimensions of the landslide were 350 m in length, 160 m in width, and 20 m in thickness, with a volume estimated at 8.0 × 10⁵ m³. The characteristics of landslide deformation and the changes in moisture content within the shallow slide body were ascertained using unmanned aerial vehicles, moisture meters, and mobile phone photography. The landslide was identified to have occurred within the weathered residual layer of mudstone, situated between two sandstone layers, with the eastern boundary defined by an inclined rock layer. Upon transitioning into the accelerated deformation stage, the landslide initially exhibited uniform overall sliding deformation, culminating in accelerated deformation destruction. The dip structure created terrain disparities, resulting in a step-like terrain on the left bank and gentler slopes on the right bank, with interbedded soil and rock in a shallow layer, because the interlayered soft and hard geological conditions caused varied weathering and erosion patterns on the riverbank slopes. The interbedded weak–hard stratum layer fostered the development of the oblique-dip slope wedge landslide. Based on the improved Green–Ampt model, we developed a stability prediction methodology for an oblique-dip slope wedge landslide and determined the rainfall infiltration depth threshold of the Wanshuitian landslide (9.8 m). This study aimed not merely to sharpen the evolution mechanism and stability prediction of the Wanshuitian landslide but also to formulate more effective landslide-monitoring strategies and emergency management measures. Full article

Coffee pulp, the primary residue generated during the wet processing of Coffea arabica L., is frequently applied directly to fields as a crude soil amendment. However, this practice often lacks proper microbial stabilization, limiting its agronomic potential and posing risks due to the presence of phytotoxic compounds. In Colombia, disease-resistant varieties such as Coffea arabica L. var. Castillo and var. Cenicafé 1, developed by the National Coffee Research Center (Cenicafé), are the amongst the most widely cultivated varieties in the country; however, despite their widespread adoption, the microbial ecology of postharvest residues from these varieties remains poorly characterized. This study aimed to isolate and functionally characterize native microbial communities from the pulp of Coffea arabica var. Castillo and var. Cenicafé 1, and to evaluate their role in postharvest processing and organic waste management. Fresh pulp samples were collected from a wet-processing facility located in tropical mid-elevation zones. A total of 53 microbial isolates were recovered using culture-dependent techniques on selective media targeting yeasts, lactic acid bacteria (LAB), and filamentous fungi. Amplicon sequencing of the 16S rRNA gene (V3–V4 region) and ITS1 region was conducted to profile bacterial and fungal communities, revealing diverse microbial consortia dominated by Aspergillus, Lactobacillus, Leuconostoc, Pichia, and Saccharomyces species. Enzymatic screening indicated high pectinolytic and cellulolytic activity. Composting trials using inoculated pulp showed a ~40% reduction in composting time and improved nutrient content. These findings support the use of native microbiota to enhance composting efficiency and postharvest valorization, contributing to more sustainable and circular coffee systems. Full article

This study analyzes the stability of embankment slopes with inclined interlayers and vertical tensile cracks at the crest under saturated conditions. This study first establishes a composite failure mechanism based on a finite element limit analysis; then, it derives an upper-bound solution formula for stability considering pore water pressure; and finally, it verifies the rationality of the method through case comparisons. This study finds that an increase in crack depth (H_c) causes the crack initiation position to approach the crest edge, while increases in the slope angle (β), pore water pressure coefficient (r_u), and interlayer embedment depth (d) lead to the opposite trend. Both the stability number (γH/c₁) and safety factor (F_s) decrease with the increase in the slope angle, pore water pressure coefficient, and crack depth, and they increase with the enhancement of relative soil strength and the increase in interlayer embedment depth. When cracks exist at the crest, the influence of pore water pressure on the sliding surface is diminished, while decreasing the cohesion ratio of interlayer to embankment slope soil (c₂/c₁) expands the range of the critical sliding surface. Full article

Burrowing mammals function as ecosystem engineers by creating spatial heterogeneity in the soil structure and vegetation composition, thereby providing microhabitats for a wide range of organisms. These keystone species play a crucial role in maintaining local ecosystem functions and delivering ecosystem services. However, in Mongolia, where overgrazing has accelerated due to the expansion of a market-based economy, scientific knowledge remains limited regarding the impacts of human activities on such species. In this study, we focused on the Siberian marmot (Marmota sibirica), an ecosystem engineer inhabiting typical Mongolian steppe ecosystems. We assessed the relationship between the spatial distribution of marmot burrows and vegetation conditions both inside and outside Hustai National Park. Burrow locations were recorded in the field, and the Normalized Difference Vegetation Index (NDVI) was calculated, using Planet Lab, Dove-2 satellite imagery (3 m spatial resolution). Through a combination of remote sensing analyses and vegetation surveys, we examined how the presence or absence of anthropogenic disturbance (i.e., livestock grazing) affects the ecological functions of marmots. Our results showed that the distance between active burrows was significantly shorter inside the park (t = −2.68, p = 0.0087), indicating a higher population density. Furthermore, a statistical approach, using beta regression, revealed a significant interaction between the burrow type (active, non-active, off-colony area) and region (inside vs. outside the park) on the NDVI (e.g., outside × non-active: z = −5.229, p < 0.001). Notably, in areas with high grazing pressure outside the park, the variance in the NDVI varied significantly as a function of burrow presence or absence (e.g., July 2023, active vs. off-colony area: F = 133.46, p < 0.001). Combined with vegetation structure data from field surveys, our findings suggest that marmot burrowing activity may contribute to the enhancement of vegetation quality and spatial heterogeneity. These results indicate that the Siberian marmot remains an important component in supporting the diversity and stability of steppe ecosystems, even under intensive grazing pressure. The conservation of this species may thus provide a promising strategy for utilizing native ecosystem engineers in sustainable land-use management. Full article

Pumping station structures are widely employed to supply circulating cooling water systems in nuclear power plants (NPPs) throughout China. Investigating their seismic performance under complex heterogeneous site conditions and load scenarios is paramount to meeting nuclear safety design requirements. This study proposes and implements a novel, efficient, and accurate viscous-spring boundary methodology within the ANSYS 19.1 finite element software to assess the seismic safety of NPP pumping station structures. The Maximum Initial Time-step (MIT) method, based on Newmark’s integration scheme, is employed for nonlinear analysis under coupled static–dynamic excitation. To account for radiation damping in the infinite foundation, a Compact Viscous-Spring (CVs) element is developed. This element aggregates stiffness and damping contributions to interface nodes defined at the outer border of the soil domain. Implementation leverages of ANSYS User Programmable Features (UPFs), and a comprehensive static–dynamic coupled analysis toolkit is developed using APDL scripting and the GUI. Validation via two examples confirms the method’s accuracy and computational efficiency. Finally, a case study applies the technique to an NPP pumping station under actual complex Chinese site conditions. The results demonstrate the method’s capability to provide objective seismic response and stability indices, enabling a more reliable assessment of seismic safety during a Safety Shutdown Earthquake (SSE). Full article

Intercropping is an eco-friendly, sustainable agricultural model that significantly improves yield stability, nutrient use efficiency, and soil health through spatiotemporal niche complementarity, increases biodiversity, and improves soil health. Water and nitrogen play crucial roles in limiting and regulating efficient resource utilization and ecological sustainability in intercropping systems. Synchronizing water and nitrogen inputs to match crop demands optimizes the spatiotemporal distribution of these resources, alleviates interspecific competition, and promotes mutualistic interactions, which significantly impacts crop growth, yield, and soil environment. This paper reviews the mechanisms of intercropping and water–nitrogen coupling regulation, aligning water and nitrogen supply with crop growth patterns, spatial configuration parameters, irrigation management techniques, and environmental climate change, and explores the response mechanisms of water–nitrogen coupling on crop growth, yield, and soil environmental adaptation. It can provide some references for researchers, extension agents, and policymakers. Research indicates that water–nitrogen coupling can enhance photosynthetic efficiency, promote root development, optimize nutrient uptake, and improve soil water dynamics, nitrogen cycling, and microbial community structures. Intercropping enhances the climate resilience of agricultural systems by leveraging species complementarity for resource utilization, strengthening ecosystem stability, and improving buffering capacity against climate change impacts such as extreme precipitation and temperature fluctuations. Future studies should further elucidate the differential effect of water–nitrogen coupling across regions and climatic conditions, focusing on multidimensional integrated administration strategies. Combining precision agriculture technologies and climate change predictions facilitates the development of more adaptive water–nitrogen coupling models to provide theoretical support and technical guarantees for sustainable agriculture. Full article