Search Results (16)

Background: Over the past few decades, shoulder arthroplasty has evolved rapidly, driven by a growing demand for surgical solutions to degenerative, traumatic, and irreparable rotator cuff-related pathologies, particularly in an aging but increasingly active population. Objective: This narrative review aims to examine the main clinical indications and the most commonly used implant designs, highlighting differences in functional outcomes, complication rates, and revision rates between anatomic total shoulder arthroplasty (ATSA) and reverse total shoulder arthroplasty (RTSA). Methods: Articles published between 2011 and 2025 were selected through PubMed and the Australian Joint Replacement Registry reports from 2023 and 2024. The included studies comprised randomized controlled trials, systematic reviews, and meta-analyses involving adult patients treated for primary osteoarthritis, proximal humerus fractures, and massive irreparable rotator cuff tears. Results: ATSA remains the preferred option in younger patients with an intact rotator cuff, due to superior outcomes in mobility and prosthesis longevity. However, glenoid component loosening remains a significant limitation. Initially reserved for irreparable cuff tears and complex fractures, RTSA has seen a progressive expansion of its indications, offering lower revision rates and satisfactory functional results, particularly in elderly patients. Recent prosthetic innovations include stemless implants, augmented glenoid components, and convertible platforms. Conclusions: The choice between ATSA and RTSA should be individualized, based on patient-specific factors such as age, rotator cuff integrity, functional demands, and bone quality. Advances in implant materials and design, together with improved patient selection, have significantly enhanced clinical outcomes. Full article

Reverse total shoulder arthroplasty (rTSA) is increasingly being used as a reliable option for various shoulder disorders with deteriorated rotator cuff and glenohumeral joints. The stemless humerus component for shoulder arthroplasties is evolving with theoretical advantages, such as preservation of the humeral bone stock and decreased risk of periprosthetic fractures, as well as clinical research demonstrating less intraoperative blood loss, reduced surgical time, a lower rate of intraoperative fractures, and improved center of rotation restoration. In particular, for anatomical total shoulder arthroplasty (aTSA), the utilization of stemless humeral implants is gaining consensus in younger patients. The current systematic review of 14 clinical studies (637 shoulders) demonstrated the clinical outcomes of stemless rTSA. Regarding shoulder function, the mean Constant-Murley Score (CS) improved from 28.3 preoperatively to 62.8 postoperatively. The pooled overall complication and revision rates were 14.3% and 6.3%, respectively. In addition, recent studies have shown satisfactory outcomes with stemless rTSA relative to stemmed rTSA. Therefore, shoulder surgeons may consider adopting stemless rTSA, especially in patients with sufficient bone quality. However, further long-term studies comparing survivorship between stemless and stemmed rTSA are required to determine the gold standard for selecting stemless rTSA. Full article

This paper presents advances in designs of resurfacing arthroplasty endoprostheses that occurred through their historical generations. The critical characteristics of contemporary generation hip resurfacing arthroplasty endoprostheses are given and the failures resulting from the specific generation cemented and short stem fixation of the femoral component are reviewed. On the background of these failures, the critical need arises for an alternative approach to the fixation of components of resurfacing arthroplasty leading towards the first generation of biomimetic fixation for resurfacing arthroplasty endoprostheses. The state of the art of the completed bioengineering research on the first biomimetic fixation for resurfacing arthroplasty endoprostheses is presented. This new design type of completely cementless and stemless resurfacing arthroplasty endoprostheses of the hip joint (and other joints), where endoprosthesis components are embedded in the surrounding bone via the prototype biomimetic multi-spiked connecting scaffold (MSC-Scaffold), initiates the first at all generations of biomimetic endoprostheses of diarthrodial joints. Full article

The primary aim of this study was to assess the medium-term outcomes of the Global Icon stemless shoulder replacement in patients who have undergone primary total shoulder arthroplasty (TSA) for glenohumeral joint osteoarthritis. A retrospective review of patients who had undergone a TSA using the Global Icon stemless shoulder system was performed. The Western Ontario Osteoarthritis Shoulder (WOOS) Index and Oxford Shoulder Score (OSS) were evaluated pre-operatively and at 12 to 24 months post-operatively. Radiological outcomes, operation time, and post-operative complications were reported. Primary analysis for the WOOS Index and OSS focused on detecting within-group treatment effects at 24 months using a repeated measures ANOVA. Thirty patients were included in the study. Post-surgery, there was a significant improvement at 24 months on the OSS (ES = 0.932, CI: 41.7 to 47.7, p < 0.001) and the WOOS Index (ES = 0.906, CI: 71.9 to 99.8, p < 0.001). Radiographs revealed that no component loosened, migrated, or subsided. The median operative time was 75.5 (IQR: 12.25, range: 18 to 105) min. No implant-related complications were reported. The Global Icon stemless replacements have excellent clinical outcomes in this cohort at 12- and 24-month follow-up with no implant-related complications. Full article

Carlina acaulis is highly valued in the traditional medicine of many European countries for its diuretic, cholagogue, anthelmintic, laxative, and emetic properties. Moreover, practitioners of natural medicine indicate that it has anti-cancer potential. However, its phytochemistry is still little known. In the present study, the polyphenolic composition of the plant was investigated using ultra-high-performance liquid chromatography coupled with a high-resolution/quadrupole time-of-flight mass spectrometer (UHPLC-HR/QTOF/MS-PDA). The fractionation of the extract was carried out using liquid-liquid extraction and preparative chromatography techniques. Cytotoxicity was assessed based on neutral red and MTT assays. The obtained data showed that the species is rich in chlorogenic acids and C-glycosides of luteolin and apigenin. The total amount of chlorogenic acids was 12.6 mg/g. Among flavonoids, kaempferol dihexosidipentose and schaftoside were the most abundant, reaching approximately 3 mg/g, followed by isoorientin, vitexin-2-O-rhamnoside, and vicenin II, each with a content of approximately 2 mg/g. Furthermore, the cytotoxic potential of the plant against human colorectal adenocarcinoma (HT29) and human cervical cancer (HeLa) cells was investigated using the normal epithelial colon cell line (CCD 841CoTr) as a reference. It has been demonstrated that the ethyl acetate fraction was the most abundant in polyphenolic compounds and had the most promising anticancer activity. Further fractionation allowed for the obtaining of some subfractions that differed in phytochemical composition. The subfractions containing polyphenolic acids and flavonoids were characterized by low cytotoxicity against cancer and normal cell lines. Meanwhile, the subfraction with fatty acids was active and decreased the viability of HeLa and HT29 with minimal negative effects on CCD 841CoTr. The effect was probably linked to traumatic acid, which was present in the fraction at a concentration of 147 mg/g of dried weight. The research demonstrated the significant potential of C. acaulis as a plant with promising attributes, thus justifying further exploration of its biological activity. Full article

Shoulder resurfacing is a versatile, bone-conserving procedure to treat arthritis, avascular necrosis, and rotator cuff arthropathy. Shoulder resurfacing is of interest to young patients who are concerned about implant survivorship and those in need of a high level of physical activity. Using a ceramic surface reduces wear and metal sensitivity to clinically unimportant levels. Between 1989 and 2018, 586 patients received cementless, ceramic-coated shoulder resurfacing implants for arthritis, avascular necrosis, or rotator cuff arthropathy. They were followed for a mean of 11 years and were assessed using the Simple Shoulder Test (SST) and Patient Acceptable Symptom State (PASS). CT scans were used in 51 hemiarthroplasty patients to assess the glenoid cartilage wear. Seventy-five patients had a stemmed or stemless implant in the contralateral extremity. A total of 94% of patients had excellent or good clinical results and 92% achieved PASS. 6% of patients required a revision. A total of 86% of patients preferred their shoulder resurfacing prosthesis over a stemmed or stemless shoulder replacement. The glenoid cartilage wear at a mean of 10 years was 0.6 mm by a CT scan. There were no instances of implant sensitivity. Only one implant was removed due to a deep infection. Shoulder resurfacing is an exacting procedure. It is clinically successful, with excellent long-term survivorship in young and active patients. The ceramic surface has no metal sensitivity, very low wear, and, therefore, it is successful as a hemiarthroplasty. Full article

Background: This study compared the healing rates of lesser tuberosity osteotomy (LTO) for anatomic total shoulder arthroplasty (TSA), repaired with either standard knot tying or a tensionable construct. Second, we evaluated LTO healing in stemmed and stemless prostheses and identified the patient characteristics associated with healing. Methods: An analysis of consecutive primary TSAs approached with an LTO performed by a single surgeon between 2016 and 2020 was conducted. In the first two years of the study period, the LTOs were repaired with four #2 polyblend sutures passed through drill tunnels and around a short press-fit stem, followed by manual knot tying. Subsequently, a tensionable construct with suture tapes (TCB) was universally adopted. The radiographic appearance of the LTO was evaluated at a minimum of six months postoperatively. Results: A total of 340 patients met the study criteria, including 168 with manual knot tying, 84 TCB repairs with a stemmed implant, and 88 TCB repairs with a stemless implant. There was no difference in the baseline demographics between the groups. The LTO healing rate of the manual knot tying group (85%) was lower than that of the stemmed (95%) and stemless (98%) TCB groups (p < 0.001). When directly comparing the LTO healing between the stemmed and stemless TCB groups, the differences were not significant (p = 0.44). Across all constructs, the body mass index (BMI) was higher in the displaced nonunion group (p = 0.04), with a failure rate of 9.4% for a BMI between 30 and 40, 12.5% for a BMI between 40 and 50, and 28.6% for a BMI > 50. The rate of tobacco use was higher in the displaced nonunion group (p = 0.037). Conclusion: A tensionable construct improves LTO healing compared to manual knot tying, irrespective of the implant type. In addition to the surgical technique, the patient factors that influence tuberosity healing include a greater BMI and tobacco use. Level of evidence: Level III, retrospective comparative study. Full article

Short femoral stems, with preservation of the femoral bone stock, are commonly used in recent years for hip replacement in younger and more active patients. Obesity is increasingly spreading even in the younger population. The aim of this case-series study is to evaluate short stems compared to traditional hip prostheses in the obese population. A total of 77 consecutive patients with a BMI greater than or equal to 30 Kg/m² were enrolled in this prospective study and were divided into two groups: 49 patients have been implanted with short stems while 28 patients were implanted with traditional stems. All the patients were treated for primary osteoarthritis or avascular necrosis and all the stems were implanted by the same surgeon using a posterior approach. Clinical (Harris Hip Score—HHS, Western Ontario and McMaster Universities Osteoarthritis Index—WOMAC, visual analogue scale—VAS, 12-item Short Form Health Survey—SF-12) and radiographic outcomes were recorded. Radiological evaluations were carried out by three different blinded surgeons. A statistical analysis was performed (chi-square, t-test, Wilcoxon Rank Sum Test, 2-factor ANOVA). At a mean follow-up of 42.6 months both groups showed a marked improvement in pain and in the clinical scores between pre- and post-surgical procedures (p < 0.05) with no significant differences between the two groups at last follow-up (p > 0.05). The radiological evaluations, with high concordance correlation between the three blinded surgeons (ICC consistently >0.80), showed good positioning and osseointegration in all cases, with no significant differences in the restoration of the joint geometry and complications. No revisions were recorded during the follow-up period. In conclusion, short stems appear to be a good option for bone preservation even in obese patients, showing comparable results to traditional implants. Full article

Background: The goal of this study was to compare the effectiveness of a rotator cuff-sparing postero-inferior (PI) approach with subdeltoidal access to the traditional subscapularis-takedown deltopectoral approach, in terms of implant sizing and positioning in anatomical total shoulder arthroplasty (aTSA). Methods: This study involved 18 human cadaveric shoulders with intact rotator cuffs and no evidence of head deforming osteoarthritis. An Eclipse stemless aTSA (Arthrex, Naples, FL, USA) was implanted in nine randomly selected specimens using a standard subscapularis-tenotomy deltopectoral approach, and in the other nine specimens using the cuff-sparing PI approach. Pre- and postoperative antero-posterior (AP) and axillary fluoroscopic radiographs were analyzed by two independent, blinded raters for the following parameters: (1) anatomic and prosthetic neck-shaft angle (NSA); (2) the shift between the anatomic and prosthetic center of rotation (COR); (3) anatomical size matching of the prosthetic humeral head; (4) the calculated Anatomic Reconstruction Score (ARS); (5) glenoid positioning; as well as (6) glenoid inclination and version. Results: While the COR was slightly but significantly positioned (p = 0.031) to be more medial in the PI approach group (3.7 ± 3.4%, range: −2.3% to 8.7%) than in the deltopectoral approach group (−0.2 ± 3.6%, range: −6.9% to 4.1%), on average, none of the remaining measured radiographic parameters significantly differed between both groups (PI approach group vs. deltopectoral group: NSA 130° vs. 127°, p = 0.57; COR supero-inferior, 2.6% vs. 1.0%, p = 0.35; COR antero-posterior, 0.9% vs. 1.7%, p = 0.57; head size supero-inferior, 97.3% vs. 98.5%, p = 0.15; head size antero-posterior, 101.1% vs. 100.6%, p = 0.54; ARS, 8.4 vs. 9.3, p = 0.13; glenoid positioning supero-inferior, 49.1% vs. 51.1%, p = 0.33; glenoid positioning antero-posterior, 49.3% vs. 50.4%, p = 0.23; glenoid inclination, 86° vs. 88°, p = 0.27; and glenoid retroversion, 91° vs. 89°, p = 0.27). Conclusions: A PI approach allows for sufficient exposure and orientation to perform rotator-cuff sparing aTSA with acceptable implant sizing and positioning in cadaveric specimens. Full article

Innovations currently available with anatomic total shoulder arthroplasty include shorter stem designs and augmented/inset/inlay glenoid components. Regarding reverse shoulder arthroplasty (RSA), metal augmentation, including custom augments, on both the glenoid and humeral side have expanded indications in cases of bone loss. In the setting of revision arthroplasty, humeral options include convertible stems and newer tools to improve humeral implant removal. New strategies for treatment and surgical techniques have been developed for recalcitrant shoulder instability, acromial fractures, and infections after RSA. Finally, computer planning, navigation, PSI, and augmented reality are imaging options now available that have redefined preoperative planning and indications as well intraoperative component placement. This review covers many of the innovations in the realm of shoulder arthroplasty. Full article

Two studies were conducted to determine how methyl jasmonate (MeJA), jasmonic acid (JA), and 1-aminocyclopropane-1-carboxylic acid (ACC) affect grape berry abscission in the initial days after treatment. The overarching goal was to determine whether JA, with or without ACC, may hold the potential to sufficiently reduce fruit detachment force (FDF) and increase the proportion of berries with dry stem scars while minimizing preharvest abscission, effects that could be useful in the production of stemless table grapes. On Thompson Seedless grapes, JA was at least as effective as MeJA for stimulating berry abscission based on reduced fruit detachment force (FDF) and yielding detached berries with dry stem scars. Further, since previous studies showed that ACC improved MeJA-induced grape abscission, we tested ACC effects on JA activity. We found that JA rapidly induced preharvest berry abscission, confirming previous results. ACC alone did not induce preharvest berry abscission, but ACC improved the effectiveness of JA on reducing FDF and increasing dry stem scar development. These studies also demonstrated that JA-induced abscission occurs within the first day after treatment. Commercial use of JA plus ACC as an abscission agent requires that FDF sufficiently declines, and the incidence of dry stem scars increases, prior to a significant increase in fruit abscission. However, the rapid progression of fruit abscission may require harvest either within 24 and 48 h after treatment or the use of a passive catch system. Full article

Metastatic melanoma is a highly malignant tumor. Melanoma cells release extracellular vesicles (EVs), which contribute to the growth, metastasis, and malignancy of neighboring cells by transfer of tumor-promoting miRNAs, mRNA, and proteins. Melanoma microenvironment acidification promotes tumor progression and determines EVs’ properties. We studied the influence of EVs derived from metastatic melanoma cells cultivated at acidic (6.5) and normal (7.4) pH on the morphology and homeostasis of normal keratinocytes. Acidification of metastatic melanoma environment made EVs more prooncogenic with increased expression of prooncogenic mi221 RNA, stemless factor CD133, and pro-migration factor SNAI1, as well as with downregulated antitumor mir7 RNA. Incubation with EVs stimulated growth and migration both of metastatic melanoma cells and keratinocytes and changed the morphology of keratinocytes to stem-like phenotype, which was confirmed by increased expression of the stemness factors KLF and CD133. Activation of the AKT/mTOR and ERK signaling pathways and increased expression of epidermal growth factor receptor EGFR and SNAI1 were detected in keratinocytes upon incubation with EVs. Moreover, EVs reduced the production of different cytokines (IL6, IL10, and IL12) and adhesion factors (sICAM-1, sICAM-3, sPecam-1, and sCD40L) usually secreted by keratinocytes to control melanoma progression. Bioinformatic analysis revealed the correlation between decreased expression of these secreted factors and worse survival prognosis for patients with metastatic melanoma. Altogether, our data mean that metastatic melanoma EVs are important players in the transformation of normal keratinocytes. Full article

The history of humeral component design has evolved from prostheses with relatively long stems and limited anatomic head options to a contemporary platform with short stems and stemless implants with shared instrumentation and the ability to provide optimal shoulder reconstruction for both anatomic and reverse configurations. Contemporary humeral components aim to preserve the bone, but they are potentially subject to malalignment. Modern components are expected to favorably load the humerus and minimize adverse bone reactions. Although there will likely continue to be further refinements in humeral component design, the next frontiers in primary shoulder arthroplasty will revolve around designing an optimal plan, including adequate soft tissue tension and providing computer-assisted tools for the accurate execution of the preoperative plan in the operating room. Full article

Background: Stemless shoulder arthroplasty (SSA) is used to anatomically reconstruct proximal humerus geometry and preserve proximal humerus bone stock. The current literature lacks 3D-analysis of pre- and postoperative proximal humeral anatomy after SSA. The aim of this study was to prospectively analyze the humeral head anatomy using a computer-assisted topography mapping technique after SSA in relation to the preoperative status and the contralateral (not affected) side. Methods: Twenty-nine patients (mean age: 63.5 ± 11.7 years) affected by primary shoulder osteoarthritis and treated with SSA were included. Preoperative and postoperative CT scans of the affected and contralateral sites were analyzed regarding joint geometry. Clinical outcome was assessed by Constant and Disabilities of the Arm, Shoulder and Hand (DASH) score shortly before and one year after surgery. Results: Clinical outcome improved significantly. No correlation between clinical outcome and the evaluated anatomical parameters was found. There was a significant decrease of the humeral head height (p < 0.01) and radius (p = 0.03) in the preoperative versus the postoperative joint geometry. The comparison to the contralateral site showed also a significant decrease of the humeral head height (p < 0.01). All other parameters showed no significant differences. Conclusion: Proximal humeral anatomy can be almost anatomically reconstructed by SSA. Solely the humeral head height differs significantly to the preoperative as well as contralateral morphology. Full article

The mechanisms of glenoid component loosening in anatomic total shoulder arthroplasty (aTSA) are still unclear, and it remains undetermined which specific radiographic features are associated with clinical outcomes. Patients with primary osteoarthritis who underwent aTSA with a stemless implant and a pegged glenoid between January 2011 and December 2016 were extracted from a local registry. Anteroposterior radiographs were evaluated at six, 12, 24 months, and five years post-TSA for lateral humeral offset (LHO), joint gap (JG), acromiohumeral distance (AHD), and radiolucency (modified Franklin score); 147 patients were included. Mixed-model linear regression was used. Both constant score (CS) and subjective shoulder value (SSV) markedly decreased at five years follow-up compared to one year (p < 0.001 for both). AHD, LHO, and JG all showed a consistent and statistically significant decline over time, with the joint gap decreasing by half. Consistently, smaller JG and AHD were correlated with lower SSV (p = 0.03 and p = 0.07, respectively). Massive loosening was associated with a 14.5 points lower SSV (p < 0.01). Finally, narrowing of the JG was significantly correlated with increased radiolucency (p < 0.001) and tended toward worse SSV (p = 0.06). In summary, radiographic parameters displaying medialization and cranialization after aTSA with a cemented pegged glenoid are useful predictors of impaired shoulder function. Full article