Search Results (8)

Sludge dewatering is a key step in the overall process of sludge treatment and disposal. In this study, ferric tannate was synthesized by chemically complexing tannic acid with Fe₂(SO₄)₃ under various conditions and then was innovatively employed to enhance electrochemical conditioning (ECC) for municipal sludge dewatering. The optimal preparation conditions of ferric tannate were determined as a tannic acid to iron ion molar ratio of 0.8:10, pH of 10, and reaction time of 2 h. Subsequently, ferric tannate-enhanced ECC was investigated under different dosages and operating parameters. The optimal conditions were identified as ferric tannate dosage of 20% total solid, voltage of 50 V, and reaction time of 30 min, under which capillary suction time, specific resistance to filtration, and water content of dewatered sludge cake decreased by 84.3%, 84.2%, and 17.6%, respectively. Results of the mechanism analysis indicated that ferric tannate effectively reduced sludge viscosity, increased zeta potential, and neutralized the negative surface charges via charge neutralization, hydrophobic interactions, and hydrogen bonding. Meanwhile, adsorption bridging promoted floc aggregation and particle growth. Compared with the ECC process alone, the addition of ferric tannate in the ferric tannate-enhanced ECC process generated more ^•OH, promoting the extracellular polymeric substance degradation and protein removal, thereby improving sludge hydrophobicity. Furthermore, the floc structure was reconstructed into a more compact and smooth morphology, facilitating the release of bound water during filtration. These findings provide new technical and theoretical support for the development of eco-friendly and efficient sludge conditioning and dewatering processes. Full article

The Monkeypox virus (MPXV), a DNA virus classified under the Orthpoxvirus genus alongside variola virus, has recently garnered significant global health attention due to its increasing transmission and emerging genomic mutations. Point-of-care testing is essential for effective clinical response and outbreak mitigation. In this article, we developed a novel class of colored microspheres designed for application in a lateral flow immunoassay (LFIA) platform targeting MPXV-specific biomarkers. Polystyrene-maleic anhydride (SMA-MAA) microspheres were synthesized with a high-temperature soap-free emulsion polymerization optimized in our lab. Subsequent alkali and acid treatments were employed to introduce porosity into the microsphere matrix. Solvent Red 27 and Disperse Red 60 were incorporated via solvent-swelling and thermal-swelling methods, respectively, to generate high brightness (HB) carriers. A surface coating composed of a tannic acid–iron (TA–Fe³⁺) coordination complex was applied to form a stable metal–polyphenol film (MPF). This coating not only minimized dye leaching by establishing a robust shell but also improved dye distribution, thereby enhancing overall color intensity. The final HB-LFIA system, configured in a sandwich immunoassay format, demonstrated favorable sensitivity and linear detection range for Monkeypox antigen, indicating strong potential for clinical diagnostic use. Full article

This study explores the effect of tannic acid on the corrosion of woodworking tool material W18Cr4V in a simulated wood environment. The weight loss method, potentiodynamic polarization, and electrochemical impedance spectroscopy were used to study the corrosion and the corrosion inhibition process of W18Cr4V in an environment of acetic acid solution with different concentrations of tannic acid. The results show that after continuous immersion for 20 h, low concentrations (1 wt% and 3 wt%) of tannic acid promoted the corrosion of W18Cr4V, while high concentrations (5 wt% and above) of tannic acid had a significant anti-corrosion effect, with a corrosion inhibition efficiency of about 64% for 10 wt% tannic acid. Scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy were used to further verify and elucidate the inhibition mechanism. It was found that tannic acid can form a dense and effective corrosion inhibition film composed of iron–tannin complexes on the surface of W18Cr4V. This study not only provides a new perspective on understanding the corrosion effect of tannic acid on woodworking tools but also offers new insights for developing effective bio-corrosion protection strategies. Full article

Healthcare-associated infections (HAIs) represent a global burden, leading to significant mortality and generating financial costs. One important cause of HAIs is the microbiological contamination of implantable medical devices. In this context, a novel antimicrobial drug-eluting system, based on chitosan and loaded with gentamicin, a broad-spectrum antibiotic, was developed. The effects of the addition of tannic acid and different FeSO₄ concentrations on the loaded antibiotic release were evaluated. The properties of the films were assessed in terms of thickness, swelling, mass loss and wettability. The films’ surface composition was characterized by X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy. The antibiotic release in phosphate buffer saline was quantified by high-performance liquid chromatography–mass spectrometry, and the antibacterial activity was evaluated. Hemolysis and cytotoxicity were also assessed. The results showed that the addition of tannic acid and iron decreased the swelling degree and degradation due to strong interactions between the different components, thus impacting gentamicin release for up to 35 days. In conclusion, this study presents a novel strategy to produce low-cost and biocompatible antimicrobial drug-eluting systems with sustained and prolonged antibacterial activity over more than a month. Full article

FT-Raman, FTIR, and SERS spectra of the structurally related gallnut polyphenols tannic acid, gallic acid, pyrogallol, and syringic acid are reported in this work aiming at performing a comparative assignation of the bands and finding specific marker features that can identify these compounds in complex polyphenol mixtures. Tannic and gallic acids are the principal components in oak gallnuts, and they can be found in iron gall inks. The different functional groups existing in these molecules and their spatial distribution lead to slight changes of the vibrations. The Raman spectra are dominated by bands corresponding to the ring vibrations, but the substituents in the ring strongly affect these vibrations. In contrast, the FTIR spectra of these molecules are dominated by the peripheral oxygen-containing substituents of the aromatic ring and afford complementary information. SERS spectroscopy can be used to analyze trace amounts of these compounds, but the spectra of these polyphenols show strong changes in comparison with the Raman spectra, indicating a strong interaction with the metal. The most significant modification observed in the SERS spectra of these compounds is the weakening of the benzene 8a ring vibration and the subsequent intensification of the 19a mode of the benzene ring. This mode is also more intense in the FTIR spectra, and its intensification in the SERS spectra could be related to a drastic change in the molecular polarizability associated with the interaction of the polyphenol with the metal in Ag NPs. Full article

Inspired by the redox reactions in the preparation of the iron gall ink that has been used in Europe since the Middle Ages, we developed a technology for forming the oil-in-water emulsions, without any surfactants and emulsifiers, by homogenizing a mixture of tannic acid, gallic acid, Fe(D-gluconate)₂, and natural oil, which are all approved as cosmetic ingredients. Various plant-derived oils, such as argan oil, olive oil, sunflower oil, grape seed oil, hemp seed oil, peppermint oil, rosemary oil, and ylang-ylang oil, were used as an oil phase for the emulsion formation, and all the fabricated emulsions exhibited the capability of black hair-dyeing. This surfactant-free emulsion technology for combining the hair-dyeing capability of Fe³⁺–tannin complex with the hair-fortifying property of natural oil would have great impact on the hair-cosmetic industry. Full article

Taxol, a formulation of paclitaxel (PTX), is one of the most widely used anticancer drugs, particularly for treating recurring ovarian carcinomas following surgery. Clinically, PTX is used in combination with other drugs such as lapatinib (LAP) to increase treatment efficacy. Delivering drug combinations with nanoparticles has the potential to improve chemotherapy outcomes. In this study, we use Flash NanoPrecipitation, a rapid, scalable process to encapsulate weakly hydrophobic drugs (logP < 6) PTX and LAP into polymer nanoparticles with a coordination complex of tannic acid and iron formed during the mixing process. We determine the formulation parameters required to achieve uniform nanoparticles and evaluate the drug release in vitro. The size of the resulting nanoparticles was stable at pH 7.4, facilitating sustained drug release via first-order Fickian diffusion. Encapsulating either PTX or LAP into nanoparticles increases drug potency (as indicated by the decrease in IC-50 concentration); we observe a 1500-fold increase in PTX potency and a six-fold increase in LAP potency. When PTX and LAP are co-loaded in the same nanoparticle, they have a synergistic effect that is greater than treating with two single-drug-loaded nanoparticles as the combination index is 0.23 compared to 0.40, respectively. Full article

A versatile, fast, and nature-inspired polyphenol chemistry surface modification was applied to prepare superhydrophobic surfaces with micro-grooved structures in this study. Tannic acid and iron ion (TA–Fe^III) complexes were employed as a molecular building block for anchoring biomimetic coating onto the wood substrate with catalytically reducing formative Ag ions as the rough surface to ensure well-developed micro/nanostructure hierarchical roughness. TA–Fe^III complexes also acted as stable bridges between the substrate and hydrophobic groups. The thickness and architecture of TA–Fe^III complex coatings can be tailored by coordination-driven multistep assembly. The results indicated that the micro/nano hierarchical roughness structure was well-developed with increased coating times and increased deposition of reduced Ag nanoparticles, resulting in excellent superhydrophobic properties (e.g., water CA (contact angle) of about 156° and a rolling angle of about 4°). The superhydrophobic material exhibited outstanding stability and durability in harsh conditions, including strong acid/base or organic solvent, high-temperature water boiling, ultrasonic cleaning, and ultraviolet aging. A series of superhydrophobic models are proposed to clarify the effect of the micro/nano hierarchical structure on these superhydrophobic properties. Full article