Search Results (1,454)

Hydrogen is increasingly recognized as a clean energy vector and storage medium, yet its viability and strategic role in the Western Balkans remain underexplored. This study provides the first comprehensive techno-economic, environmental, and strategic evaluation of hydrogen production pathways in Albania. Results show clear trade-offs across options. The levelized cost of hydrogen (LCOH) is estimated at 8.76 €/kg H₂ for grid-connected, 7.75 €/kg H₂ for solar, and 7.66 €/kg H₂ for wind electrolysis—values above EU averages and reliant on lower electricity costs and efficiency gains. In contrast, fossil-based hydrogen via steam methane reforming (SMR) is cheaper at 3.45 €/kg H₂, rising to 4.74 €/kg H₂ with carbon capture and storage (CCS). Environmentally, Life Cycle Assessment (LCA) results show much lower Global Warming Potential (<1 kg CO₂-eq/kg H₂) for renewables compared with ~10.39 kg CO₂-eq/kg H₂ for SMR, reduced to 3.19 kg CO₂-eq/kg H₂ with CCS. However, grid electrolysis dominated by hydropower entails high water-scarcity impacts, highlighting resource trade-offs. Strategically, Albania’s growing solar and wind projects (electricity prices of 24.89–44.88 €/MWh), coupled with existing gas infrastructure and EU integration, provide strong potential. While regulatory gaps and limited expertise remain challenges, competition from solar-plus-storage, regional rivals, and dependence on external financing pose additional risks. In the near term, a transitional phase using SMR + CCS could leverage Albania’s gas assets to scale hydrogen production while renewables mature. Overall, Albania’s hydrogen future hinges on targeted investments, supportive policies, and capacity building aligned with EU Green Deal objectives, with solar-powered electrolysis offering the potential to deliver environmentally sustainable green hydrogen at costs below 5.7 €/kg H₂. Full article

Traditional energy harvesting systems, such as photovoltaics and wind power, often rely on external environmental conditions and are typically associated with contact-based vibration wear and bulky structures. This study introduces light-fueled self-vibration to propose a self-harvesting system, consisting of liquid crystal elastomer fibers, two resistors, and two piezoelectric cantilever beams arranged symmetrically. Based on the photothermal temperature evolution, we derive the governing equations of the liquid crystal elastomer fiber–piezoelectric beam system. Two distinct states, namely a self-harvesting state and a static state, are revealed through numerical simulations. The self-oscillation results from light-induced cyclic contraction of the liquid crystal elastomer fibers, driving beam bending, stress generation in the piezoelectric layer, and voltage output. Additionally, the effects of various system parameters on amplitude, frequency, voltage, and power are analyzed in detail. Unlike traditional vibration energy harvesters, this light-fueled self-harvesting system features a compact structure, flexible installation, and ensures continuous and stable energy output. Furthermore, by coupling the light-responsive LCE fibers with piezoelectric transduction, the system provides a non-contact actuation mechanism that enhances durability and broadens potential application scenarios. Full article

Stomoxys calcitrans (Linnaeus, 1758) is a hematophagous fly species of veterinary importance, known for its negative effects on animal health and productivity. The stress caused by their painful bites results in losses in milk and meat production. Despite its impact, data on its ecology and activity in Algeria are lacking. Such knowledge is needed to evaluate its potential effects on livestock production and rural health, and to support surveillance, outbreak prediction, and control strategies. This study aimed to investigate the monthly and daily dynamics of S. calcitrans in livestock farms in the Batna region and evaluate the influence of climatic factors on its abundance. From July 2022 to July 2023, Vavoua traps were placed monthly from 7 a.m. to 6 p.m. on four farms in the Batna region, representing different livestock types. Captured flies were identified, sexed, and counted every two hours. Climatic data were collected both in situ and from NASA POWER datasets. Fly abundance was analyzed using non-parametric statistics, Spearman’s correlation, and multiple regression analysis. A total of 1244 S. calcitrans were captured, mainly from cattle farms. Activity occurred from August to December, with a peak in September. Males were more abundant and exhibited a bimodal activity in September. Fly abundance was positively correlated with temperature and precipitation and negatively correlated with wind speed and humidity. This study presents the first ecological data on S. calcitrans in northeastern Algeria, highlighting its seasonal dynamics and the climatic drivers that influence it. The results highlight the species’ preference for cattle and indicate that temperature and rainfall are key factors influencing its abundance. These findings lay the groundwork for targeted control strategies against this neglected pest in Algeria. Full article

Jordan Vision prioritizes the utilization of domestic resources, particularly renewable energy. The transportation sector, responsible for 49% of national energy consumption, remains central to this transition and accounts for around 28% of total greenhouse gas emissions. Electric vehicles (EVs) offer a promising solution to reduce waste and pollution, but they also pose challenges for grid stability and charging infrastructure development. This study addresses a critical gap in the planning of renewable-powered EV charging stations along Jordanian highways, where EV infrastructure is still limited and underdeveloped, by optimizing the design of a hybrid energy charging station using HOMER Grid (v1.9.2) Software. Region-specific constraints and multiple operational scenarios, including rooftop PV integration, are assessed to balance cost, performance, and reliability. This study also investigates suitable locations for charging stations along the Sahrawi Highway in Jordan. The proposed station, powered by a hybrid system of 53% wind and 29% solar energy, is projected to generate 1.466 million kWh annually at USD 0.0375/kWh, reducing CO₂ emissions by approximately 446 tonnes annually. The findings highlight the potential of hybrid systems to increase renewable energy penetration, support national sustainability targets, and offer viable investment opportunities for policymakers and the private sector in Jordan. Full article

As states within the United States respond to future grid development goals, there is a growing demand for reliable and resilient nighttime generation that can be addressed by low-cost, long-duration energy storage solutions. This report studies the potential of including concentrating solar power (CSP) in the technology mix to support California’s goals as defined in Senate Bill 100. A joint agency report study that determined potential pathways to achieve the renewable portfolio standard set by the bill did not include CSP, and our work provides information that could be used as a follow-up. This study uses a capacity expansion model configured to have nodal spatial fidelity in California and balancing-area fidelity in the Western Interconnection outside of California. The authors discovered that by applying current technology cost projections CSP fulfills nearly 15% of the annual load while representing just 6% of total installed capacity in 2045, replacing approximately 30 GWe of wind, solar PV, and standalone batteries compared to a scenario without CSP included. The deployment of CSP in the results is sensitive to the technology’s cost, which highlights the importance of meeting cost targets in 2030 and beyond to enable the technology’s potential contribution to California’s carbon reduction goals. Full article

This study models different hybrid systems based on renewable energies that can be supported by diesel generators to meet the energy needs of isolated homes in the Canary Islands. The research will cover the energy requirements of a residential house, including the production of fresh water using a reverse osmosis desalination plant. The system is designed to operate independently of the electrical grid. The HOMER software package was used to model and optimize the hybrid systems. The model was fed with data on the electrical demands of residential homes (including the consumption by the small reverse osmosis desalination plant) as well as the technical specifications of the various devices and renewable energy sources, such as solar radiation and wind speed potentials. The software considers various configurations to optimize hybrid systems, selecting the most suitable one based on the available renewable energy sources at the selected location. The data used in the research were collected on the eastern islands of the Canary Islands (Gran Canaria, Lanzarote and Fuerteventura). Based on the system input parameters, the simulation and optimization performed in HOMER, taking into account the lowest “Levelized Cost of Energy”, it can be concluded that the preferred hybrid renewable energy system for this region is a small wind turbine with a nominal power of 1.9 kW, eight batteries, and a small diesel generator with a nominal power of 1.0 kW. The knowledge from this research could be applied to other geographical areas of the world that have similar conditions, namely a shortage of water and plentiful renewable energy sources. Full article

Spent coffee grounds represent an abundant waste resource with potential for sustainable material applications. This study investigates the use of carbonized spent coffee grounds (CSCG) as fillers in polyurethane (PU) coatings for carbon fiber-reinforced polymer (CFRP) substrates to enhance mechanical durability and anti-icing performance. SCGs were dried, sieved (<100 µm), and oxidatively carbonized in air at 100–300 °C for 60–120 min, then incorporated into PU at 1 or 5 wt.% and applied by spray-coating. A full-factorial design was employed to evaluate the effects of carbonization temperature, particle size, and filler loading. The optimized formulation (300 °C, 100 µm, 5 wt.%) showed the highest water contact angle (103.5°), lowest work of adhesion (55.8 mJ/m²), and improved thermal stability with 60% char yield. Mechanical testing revealed increased tensile modulus with reduced strain, and differential scanning calorimetry indicated an upward shift in glass-transition temperature, suggesting restricted chain mobility. Ice formation at 0 °C was sparse and discontinuous, attributed to lowered polar surface energy, rough surface texture, and porous carbon morphology. These results demonstrate that CSCGs are effective sustainable fillers for PU coatings, offering combined improvements in mechanical, thermal, and anti-icing properties suitable for aerospace, wind power, and other icing-prone applications. Full article

To address the severe damage and outage risks to distribution networks caused by extreme weather, this paper proposes a coordinated optimization strategy for distribution network repair sequencing and rapid restoration, which considers multi-source collaboration and incomplete fault information. In response to the challenge of incomplete fault information after a disaster, a two-layer robust optimization model is constructed. The upper-layer model aims to minimize the completion time of repairs for all faults under the most unfavorable fault scenario to obtain a robust repair time for potential faulty lines, providing a reliable basis for the restoration decisions of the lower-layer model. The lower-layer model’s objective is to maximize the weighted restored load quantity by comprehensively coordinating mobile diesel generators (MDGs), distributed generators (DGs), photovoltaics (PVs), wind turbines (WTs), and energy storage systems (ESSs) to achieve the optimal restoration strategy. The proposed service restoration strategy is validated through simulation on a modified IEEE 33-bus power system, and the results demonstrate that the strategy can efficiently and comprehensively utilize multi-source collaborative resources and improve the resilience of the distribution network. Full article

The efficient recovery of waste heat is essential for improving sustainability in industrial and urban energy systems. This study presents the experimental evaluation of a passive heat recovery unit composed of finned thermosyphons and Bismuth Telluride (Bi₂Te₃) thermoelectric generators (TEGs). The primary objective was to characterize its simultaneous thermal recovery and electrical generation capabilities under airflow and temperature conditions simulating low-grade industrial exhaust streams. The system was tested in an open-loop wind tunnel simulating exhaust gases under air velocities of 0.6, 1.1, and 1.7 m/s. Heat was transferred to the TEGs through finned thermosyphons, enabling power generation via the Seebeck effect. The passive heat exchange mechanism successfully recovered up to 250.9 W of thermal power, preheating the inlet air by a maximum of 9.5 °C with a peak thermal effectiveness of 44.4%. Simultaneously, the system achieved a maximum temperature difference of 30.0 °C across the thermoelectric modules, generating a total electrical power of 163.7 mW (81.8 mW per TEG). This dual-purpose operation resulted in a maximum overall first-law efficiency of 9.38% and an electrical power density of 52.20 W/m² from the low-grade thermal stream. These results confirm the technical feasibility of this compact, passive, and maintenance-free design, highlighting its potential for integration into applications like district heating or industrial ventilation, where balancing thermal and electrical outputs is crucial. Full article

Mexico holds significant potential for wind energy development, owing to its strategic geographic location and extensive coastlines. This review article systematically explores the technical, environmental, and economic aspects of wind energy in five different climatic zones in Mexico, reviewing potential zones for wind energy development, with the focus on the key case studies, ongoing project, and wind power performance metrics. It also critically examines the key challenges and opportunities within Mexico’s wind energy portfolio, with a focus on social, economic, environmental, and regulatory dimensions that influence the sector’s development and long-term sustainability. The results indicate that Oaxaca leads Mexico’s onshore wind potential with a power density of 761 W/m², followed by strong resources in Tamaulipas and Baja California, where wind speeds exceed 6 m/s. For offshore wind potential, Isthmus of Tehuantepec demonstrates outstanding offshore potential, with wind power densities exceeding 1000 W/m² and wind speeds above 8 m/s. Major challenges include inconsistent or unclear governmental policies regarding renewable energy incentives, regulatory uncertainties, and social resistance from local communities concerned about environmental impacts and land use. These obstacles underline the need for integrated, transparent policies and inclusive engagement strategies to carry out the full potential of wind energy in Mexico. Full article

The role of green and low-carbon energy (gLE) resources in realizing the envisaged future decarbonized energy generation and supply cannot be overemphasized. The world has witnessed growing attention to the application of green energy (gE) sources such as solar, wind, hydro, geothermal, and biomass (energy crops, biogas, biodiesel, etc.). There is also the existence of low-carbon energy (LE) resources such as power-to-X, power-to-fuel, power-to-gas, e-fuel, waste-to-energy, etc., which possess huge potential for delivering sustainable energy, thus facilitating a pathway for achieving the desired environmental sustainability. In addition, the evolution of the cyber-physical power systems and the need for strengthening capacity in advanced energy materials are among the key factors that drive the deployment of gLE technologies around the world. This paper, therefore, presents the recent global developments in gLE resources, including the trends in their deployments for different applications in commercial premises. The study introduces different conceptual technical models and configurations of energy systems; the potential of multi-energy generation in a microgrid (m-grd) based on the gLE resources is also explored using the System Advisor Model (SAM) software. The m-grd is being fueled by solar, wind, and fuel cell resources for supplying a commercial load. The quantity of carbon emissions avoided by the m-grd is evaluated compared to a purely conventional m-grd system. The paper presents the cost of energy and the net present cost of the proposed m-grid; it also discusses the relevance of carbon capture and storage and carbon sequestration technologies. The paper provides deeper insights into the understanding of clean and unconventional energy resources. Full article

This study presents a comparative analysis of horizontal-axis wind turbines (HAWTs) equipped with and without bio-inspired active oscillating vortex generators (VGs). The experimental investigation examines key aspects of mechanical integration and the resulting variations in aerodynamic behavior, demonstrating measurable improvements in electrical power output. The VGs were designed and implemented using servomechanisms and embedded control systems to enable oscillatory motion during operation. Experimental findings were validated against CFD simulations, indicating that the use of VGs increases annual energy production efficiency by 16.7%, primarily due to the stabilization of wake turbulence. While a reduction in output voltage was observed at wind speeds below 5 m/s, the VGs exhibited enhanced performance under variable wind conditions. These results highlight the potential of combining biomimetic design principles with electronically actuated flow-control devices to advance HAWT technology, improving energy efficiency and contributing to operational sustainability. Full article

Wind farms situated in proximity to residential areas present environmental challenges, primarily due to noise emissions. Rectangular and parallelogram layouts are commonly employed in current wind farm designs owing to their simplicity and visual appeal. However, such configurations often experience significant power loss under certain wind directions because of intense wake interactions. This paper proposes a layout fine-tuning strategy for low-noise wind farm design. Within a reinforcement learning framework integrated with an engineering wake model and a noise propagation model, the positions of two turbines (controlled by two variables) are optimized. The noise propagation model was validated for idealized long-range sound propagation over flat terrain with acoustically soft surfaces. A case study was conducted on a 12-turbine wind farm located on a flat plain in China, with a noise threshold of 45 dB(A) used to assess the noise impact area. Optimization results demonstrate that the proposed method achieves a balance between power output and noise reduction compared to the original regular layout: Annual Energy Production (AEP) increased slightly by 0.16%, while the noise impact area was reduced by 6.0%. Although these improvements appear modest, the potential of the proposed methodology warrants further investigation. Full article

Offshore wind farms are rapidly expanding worldwide, and the submerged structures supporting wind turbines have the potential to function as artificial reefs for marine organisms. Quantitative visualization of fish aggregations around these foundations can provide valuable information for promoting collaboration between fisheries and offshore wind energy development. This study explored the use of multibeam sonar to detect spatial distributions and estimate the biomass of pelagic fish aggregations around the foundations of offshore wind power facilities. Fish distribution was extracted from multibeam water column image data using an automated sequence of filtering steps, ending with a spatial filter designed to remove common noise artifacts in multibeam sonar data. The resulting fish aggregations were visualized in three dimensions, revealing a tendency to cluster leeward of turbine and observation tower foundations, and fish biomass was successfully estimated from beam backscatter strength. The developed method can be applied to other offshore wind farms to demonstrate the role of turbine foundations as artificial reefs for fish. Full article

Mechanical vibrations induced by electromagnetic forces during transformer operation can lead to winding deformation or failure, an issue responsible for over 12% of all transformer faults. While previous studies have predominantly relied on accelerometers for vibration monitoring, this study explores the use of an optical sensor for real-time vibration measurement in a dry-type transformer. Experiments were conducted using a custom-designed single-phase transformer model specifically developed for laboratory testing. This experimental setup offers a unique advantage: it allows for the interchangeable simulation of healthy and deformed winding sections without causing permanent damage, enabling controlled and repeatable testing scenarios. The transformer’s secondary winding was short-circuited, and three levels of current (low, intermediate, and high) were applied to simulate varying stress conditions. Vibration displacement data were collected under load to assess mechanical responses. The primary goal was to classify this vibration data to localize potential winding deformation faults. Five supervised learning algorithms were evaluated: Random Forest, Support Vector Machine, K-Nearest Neighbors, Logistic Regression, and Decision Tree classifiers. Hyperparameter tuning was applied, and a comparative analysis among the top four models yielded average prediction accuracies of approximately 60%. These results, achieved under controlled laboratory conditions, highlight the promise of this approach for further development and future real-world applications. Overall, the combination of optical sensing and machine learning classification offers a promising pathway for proactive monitoring and localization of winding deformations, supporting early fault detection and enhanced reliability in power transformers. Full article