Next Article in Journal
Heat-Resistant Ferroelectric-Polymer Nanocomposite with High Dielectric Constant
Next Article in Special Issue
Analysis of Favorable Process Conditions for the Manufacturing of Thin-Wall Pieces of Mild Steel Obtained by Wire and Arc Additive Manufacturing (WAAM)
Previous Article in Journal
Effect of Electromagnetic Stirring on the Microstructure and Properties of Fe-Cr-Co Steel
Previous Article in Special Issue
Assessment of the Potential Economic Impact of the Use of AM Technologies in the Cost Levels of Manufacturing and Stocking of Spare Part Products
 
 
Article

Article Versions Notes

Materials 2018, 11(8), 1438; https://doi.org/10.3390/ma11081438
Action Date Notes Link
article xml file uploaded 15 August 2018 04:42 CEST Original file -
article xml uploaded. 15 August 2018 04:42 CEST Update -
article pdf uploaded. 15 August 2018 04:42 CEST Version of Record https://www.mdpi.com/1996-1944/11/8/1438/pdf-vor
article html file updated 15 August 2018 04:43 CEST Original file -
article pdf uploaded. 20 August 2018 11:56 CEST Updated version of record https://www.mdpi.com/1996-1944/11/8/1438/pdf
article xml uploaded. 20 August 2018 11:56 CEST Update https://www.mdpi.com/1996-1944/11/8/1438/xml
article html file updated 20 August 2018 11:57 CEST Update -
article html file updated 27 August 2018 06:33 CEST Update -
article html file updated 31 March 2019 08:21 CEST Update -
article html file updated 15 April 2019 11:55 CEST Update -
article html file updated 29 April 2019 16:35 CEST Update -
article html file updated 6 October 2019 16:34 CEST Update -
article html file updated 10 February 2020 05:59 CET Update -
article html file updated 17 July 2022 00:58 CEST Update https://www.mdpi.com/1996-1944/11/8/1438/html
Back to TopTop