Next Article in Journal
Effects of Increasing Feed Rate on Tool Deterioration and Cutting Force during End Milling of 718Plus Superalloy Using Cemented Tungsten Carbide Tool
Next Article in Special Issue
Effect of Weld Current on the Microstructure and Mechanical Properties of a Resistance Spot-Welded TWIP Steel Sheet
Previous Article in Journal
Effect of Ultrasonic Surface Impact on the Fatigue Behavior of Ti-6Al-4V Subject to Simulated Body Fluid
Previous Article in Special Issue
Resistance Upset Welding of ODS Steel Fuel Claddings—Evaluation of a Process Parameter Range Based on Metallurgical Observations
 
 
Article

Article Versions Notes

Metals 2017, 7(10), 436; https://doi.org/10.3390/met7100436
Action Date Notes Link
article pdf uploaded. 18 October 2017 16:07 CEST Version of Record https://www.mdpi.com/2075-4701/7/10/436/pdf
article xml uploaded. 18 October 2017 16:07 CEST Original file -
article xml uploaded. 18 October 2017 16:07 CEST Update https://www.mdpi.com/2075-4701/7/10/436/xml
article html file updated 18 October 2017 16:08 CEST Original file -
article html file updated 3 November 2017 04:24 CET Update -
article html file updated 2 May 2019 20:26 CEST Update -
article html file updated 27 September 2019 20:37 CEST Update -
article html file updated 8 February 2020 18:49 CET Update https://www.mdpi.com/2075-4701/7/10/436/html
Back to TopTop