Next Article in Journal
An Investigation into Tool Wear and Hole Quality during Low-Frequency Vibration-Assisted Drilling of CFRP/Ti6Al4V Stack
Next Article in Special Issue
Selective Laser Melting: Materials and Applications
Previous Article in Journal
Sustainability Assessment during Machining Ti-6Al-4V with Nano-Additives-Based Minimum Quantity Lubrication
Previous Article in Special Issue
Dimensional Quality and Distortion Analysis of Thin-Walled Alloy Parts of AlSi10Mg Manufactured by Selective Laser Melting
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2019, 3(3), 62; https://doi.org/10.3390/jmmp3030062
Action Date Notes Link
article xml file uploaded 25 July 2019 15:59 CEST Original file -
article pdf uploaded. 25 July 2019 15:59 CEST Version of Record https://www.mdpi.com/2504-4494/3/3/62/pdf-vor
article xml file uploaded 30 July 2019 04:02 CEST Update -
article xml uploaded. 30 July 2019 04:02 CEST Update https://www.mdpi.com/2504-4494/3/3/62/xml
article pdf uploaded. 30 July 2019 04:02 CEST Updated version of record https://www.mdpi.com/2504-4494/3/3/62/pdf
article html file updated 30 July 2019 04:04 CEST Original file -
article html file updated 13 February 2020 05:00 CET Update https://www.mdpi.com/2504-4494/3/3/62/html
Back to TopTop