Review Papers in Clean Technologies

A topical collection in Clean Technologies (ISSN 2571-8797).

Viewed by 53231

Editor


E-Mail Website
Collection Editor

Topical Collection Information

Dear Colleagues,

Recent reports by the Intergovernmental Panel on Climate Change (IPCC) show that, during the 20th century, the world increased its use of fossil fuels tenfold, as well as the extraction of material resources. This era of abundant and cheap resources is coming to an end. Raw materials, water, air, biodiversity, and marine, terrestrial, and aquatic ecosystems are all under pressure. Many of the world's major ecosystems are in a state of degradation and the services they provide are being used unsustainably.

The increasing impact of climate change and related environmental problems—including ocean acidification, changes in ocean circulation, rising sea water temperatures, melting Arctic ice, decreasing seawater salinity, land degradation, land use loss of soil fertility, water scarcity, droughts and floods, seismic and volcanic hazards, changes in the spatial distribution of species, chemical pollution, the overexploitation of resources, and the loss of biodiversity—indicate that the planet is approaching the limits of its sustainability.

Sustainable supply together with a resource-efficient management of raw materials, including exploration, extraction, processing, reuse, recycling, and substitution, are essential for the functioning of modern societies and their economies. The ability of the economy to adapt, become more resilient to climate change, and become more resource efficient—while maintaining competitiveness—depends on high levels of economic, social, organizational, and technological eco-innovation.

This is the context for the collection Review Papers in Clean Technologies, where the published articles consist of literature reviews, i.e., studies that summarize or reinterpret high-level scientific findings in a new way. The scope of the topics covered is very broad, relates to the fields covered by the journal, and is consistent with the Sustainable Development Goals (SDGs) of the UN 2030 Agenda.

Dr. Sabino De Gisi
Collection Editor

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the collection website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Clean Technologies is an international peer-reviewed open access quarterly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 1600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Published Papers (14 papers)

2024

Jump to: 2023

33 pages, 3209 KiB  
Review
Advances in the Design of Renewable Energy Power Supply for Rural Health Clinics, Case Studies, and Future Directions
by Abubakar Abdulkarim, Nasir Faruk, Emmanuel Alozie, Hawau Olagunju, Ruqayyah Yusuf Aliyu, Agbotiname Lucky Imoize, Kayode S. Adewole, Yusuf Olayinka Imam-Fulani, Salisu Garba, Bashir Abdullahi Baba, Mustapha Hussaini, Abdulkarim A. Oloyede, Aminu Abdullahi, Rislan Abdulazeez Kanya and Dahiru Jafaru Usman
Clean Technol. 2024, 6(3), 921-953; https://doi.org/10.3390/cleantechnol6030047 - 15 Jul 2024
Viewed by 1158
Abstract
Globally, effective and efficient healthcare is critical to the wellbeing and standard of living of any society. Unfortunately, several distant communities far from the national grid do not have access to reliable power supply, owing to economic, environmental, and technical challenges. Furthermore, unreliable, [...] Read more.
Globally, effective and efficient healthcare is critical to the wellbeing and standard of living of any society. Unfortunately, several distant communities far from the national grid do not have access to reliable power supply, owing to economic, environmental, and technical challenges. Furthermore, unreliable, unavailable, and uneconomical power supply to these communities contributes significantly to the delivery of substandard or absence of qualitative healthcare services, resulting in higher mortality rates and associated difficulty in attracting qualified healthcare workers to the affected communities. Given these circumstances, this paper aims to conduct a comprehensive review of the status of renewable energy available to rural healthcare clinics around the globe, emphasizing its potential, analysis, procedures, modeling techniques, and case studies. In this light, several renewable energy modeling techniques were reviewed to examine the optimum power supply to the referenced healthcare centers in remote communities. To this end, analytical techniques and standard indices for reliable power supply to the isolated healthcare centers are suggested. Specifically, different battery storage systems that are suitable for rural healthcare systems are examined, and the most economical and realistic procedure for the maintenance of microgrid power systems for sustainable healthcare delivery is defined. Finally, this paper will serve as a valuable resource for policymakers, researchers, and experts in rural power supply to remote healthcare centers globally. Full article
Show Figures

Figure 1

34 pages, 434 KiB  
Review
Co-Treatment of Food Waste and Municipal Sewage Sludge: Technical and Environmental Review of Biological and Thermal Technologies
by Giovanni Gadaleta, Francesco Todaro, Annamaria Giuliano, Sabino De Gisi and Michele Notarnicola
Clean Technol. 2024, 6(3), 852-885; https://doi.org/10.3390/cleantechnol6030044 - 5 Jul 2024
Viewed by 1362
Abstract
To face the ongoing issues related to global warming, a circular economy approach should be pursued, rethinking the waste management system and the recovery of organic waste. The main organic waste streams are Food Waste (FW) and municipal Sewage Sludge (SS). In the [...] Read more.
To face the ongoing issues related to global warming, a circular economy approach should be pursued, rethinking the waste management system and the recovery of organic waste. The main organic waste streams are Food Waste (FW) and municipal Sewage Sludge (SS). In the spirit of circularity, a commingled treatment of FW and SS could be a viable solution. To this end, the present work aims to review the technical and environmental aspects of the co-treatment of FW and SS through biological and thermal processes. Firstly, a detailed characterization of the two substrates is presented as well as the current and future treatment technologies. Then, the technical feasibility and the environmental impacts of conventional biological co-treatments of FW and SS (i.e., composting, anaerobic digestion, and a combination of them), as well as innovative thermal ones (i.e., incineration, gasification, pyrolysis, and hydrothermal carbonization), is summarized. The outcomes of this work could contribute to achieving a more sustainable way to approach organic waste treatment and to help policy-making authorities move toward sustainable planning. Full article
32 pages, 6242 KiB  
Article
Status of Solar-Energy Adoption in GCC, Yemen, Iraq, and Jordan: Challenges and Carbon-Footprint Analysis
by Ashraf Farahat, Abdulhaleem H. Labban, Abdul-Wahab S. Mashat, Hosny M. Hasanean and Harry D. Kambezidis
Clean Technol. 2024, 6(2), 700-731; https://doi.org/10.3390/cleantechnol6020036 - 7 Jun 2024
Viewed by 1599
Abstract
This work examines the potential of some of the Gulf Cooperation Council countries (GCC) (Saudi Arabia (KSA), the United Arab Emirates (UAE), Qatar (QA), Bahrain (BH), Oman (OM)), Yemen (YE), Iraq (IQ), and Jordan (JO) to use their abundant solar radiation to generate [...] Read more.
This work examines the potential of some of the Gulf Cooperation Council countries (GCC) (Saudi Arabia (KSA), the United Arab Emirates (UAE), Qatar (QA), Bahrain (BH), Oman (OM)), Yemen (YE), Iraq (IQ), and Jordan (JO) to use their abundant solar radiation to generate electricity through PV technology. The study is structured to help decision-makers access the necessary data related to the status of solar-energy infrastructure and power production in the study region. The study investigates current efforts to establish PV technology and the challenges hindering the development of this technology. These efforts and challenges are then benchmarked against their status in Australia, which has climate and landscape conditions similar to those of the countries in the study region. It was found that Australia is successfully adopting solar energy in households and industrial locations despite its historical reliance on fossil fuels for energy production. This offers a potential avenue for replicating the Australian model of PV development in the study region. This work also addresses the effect of natural and anthropogenic aerosols on the performance of the PV panels. Meanwhile, it also proposes a conceptual model to help local governments and decision-makers in adopting solar-energy projects in the study region. Additionally, a preliminary carbon-footprint analysis of avoided emissions from PV energy utilization compared to national grid intensity was performed for each country. Findings show that the countries in the study region have great potential for using solar energy to gradually replace fossil fuels and protect the environment. It is observed that more hours of daylight and clear-to-scattered cloud coverage help increase solar irradiance near the ground all year around. Dust and aerosol loadings, however, were found to greatly reduce solar irradiance over the GCC area, especially during large dust events. Despite the high potential for harvesting solar energy in the study region, only a handful of PV plants and infrastructural facilities have been established, mostly in the KSA, the UAE, and Jordan. It was found that there is a critical need to put in place regulations, policies, and near-future vision to support solar energy generation and reduce reliance on fossil fuels for electricity production. Full article
Show Figures

Figure 1

21 pages, 1411 KiB  
Review
Sustainable Treatment of Spent Photovoltaic Solar Panels Using Plasma Pyrolysis Technology and Its Economic Significance
by Ping Fa Chiang, Shanshan Han, Mugabekazi Joie Claire, Ndungutse Jean Maurice, Mohammadtaghi Vakili and Abdulmoseen Segun Giwa
Clean Technol. 2024, 6(2), 432-452; https://doi.org/10.3390/cleantechnol6020022 - 9 Apr 2024
Cited by 7 | Viewed by 2452
Abstract
In the past few decades, the solar energy market has increased significantly, with an increasing number of photovoltaic (PV) modules being deployed around the world each year. Some believe that these PV modules have a lifespan of around 25–30 years. As their lifetime [...] Read more.
In the past few decades, the solar energy market has increased significantly, with an increasing number of photovoltaic (PV) modules being deployed around the world each year. Some believe that these PV modules have a lifespan of around 25–30 years. As their lifetime is limited, solar panels wind up in the waste stream after their end of life (EoL). Several ecological challenges are associated with their inappropriate disposal due to the presence of hazardous heavy metals (HMs). Some studies have reported different treatment technologies, including pyrolysis, stabilization, physical separation, landfill, and the use of chemicals. Each proposed treatment technique pollutes the environment and underutilizes the potential resources present in discarded solar panels (DSPs). This review recommends thermal plasma pyrolysis as a promising treatment technology. This process will have significant advantages, such as preventing toxic HMs from contaminating the soil and groundwater, reducing the amount of e-waste from DSPs in an environmentally friendly and economical way, and allows the utilization of the valuable resources contained in EoL photovoltaic solar panel modules by converting them into hydrogen-rich syngas to generate thermal energy, electricity, and non-leachable slag that can be used as an additive in other treatment processes or as a conditioner to improve soil properties. However, plasma pyrolysis uses a high temperature to break down waste materials, a challenge which can be offset by the integration of this process in anaerobic digestion (AD), as the slag from plasma pyrolysis can be used as an additive in AD treatments to produce high yields of biogas and improve nutrient recovery. Moreover, the produced energy from both processes can operate the entire plant in which they take place and increase the net energy production, a resource which can be sold for an additional income. Future challenges and recommendations are also highlighted. Full article
Show Figures

Figure 1

14 pages, 3150 KiB  
Review
Status of Concentrated Solar Power Plants Installed Worldwide: Past and Present Data
by Sylvain Rodat and Richard Thonig
Clean Technol. 2024, 6(1), 365-378; https://doi.org/10.3390/cleantechnol6010018 - 19 Mar 2024
Cited by 2 | Viewed by 3598
Abstract
Solar energy is not only the most abundant energy on earth but it is also renewable. The use of this energy is expanding very rapidly mainly through photovoltaic technology. However, electricity storage remains a bottleneck in tackling solar resource variability. Thus, solar thermal [...] Read more.
Solar energy is not only the most abundant energy on earth but it is also renewable. The use of this energy is expanding very rapidly mainly through photovoltaic technology. However, electricity storage remains a bottleneck in tackling solar resource variability. Thus, solar thermal energy becomes of particular interest when energy storage is required, as thermal energy storage is much cheaper than electricity storage. The objective of this paper is to make a short update on the CSP (Concentrated Solar Power) market as of the year 2023. It is based on the CSP-GURU database, which lists information on CSP power plants all over the world. Although this database is open, it is not easy to find UpToDate analysis. An overview of this expanding technology is presented and offers readable figures with the most important information. This includes the evolution of installed capacities worldwide along with upcoming projects (under construction) and technological trends. The evolution of storage capacities and operating temperatures is discussed. Investment costs and levelized cost of electricity are also provided to obtain reliable data for comparison with other energy technologies. Specific land requirements are highlighted, along with overall efficiency. Relevant examples are discussed in this paper. Eventually, it outlines the evolution of the CSP landscape with useful information for scientific and educational purposes. Full article
Show Figures

Figure 1

2023

Jump to: 2024

20 pages, 4981 KiB  
Review
Toward Efficient Recycling of Vanadium Phosphate-Based Sodium-Ion Batteries: A Review
by Aleksandr Sh. Samarin, Alexey V. Ivanov and Stanislav S. Fedotov
Clean Technol. 2023, 5(3), 881-900; https://doi.org/10.3390/cleantechnol5030044 - 6 Jul 2023
Cited by 7 | Viewed by 3173
Abstract
Sodium-ion batteries (SIBs) have demonstrated noticeable development since the 2010s, being complementary to the lithium-ion technology in predominantly large-scale application niches. The projected SIB market growth will inevitably lead to the generation of tons of spent cells, posing a notorious issue for proper [...] Read more.
Sodium-ion batteries (SIBs) have demonstrated noticeable development since the 2010s, being complementary to the lithium-ion technology in predominantly large-scale application niches. The projected SIB market growth will inevitably lead to the generation of tons of spent cells, posing a notorious issue for proper battery lifecycle management, which requires both the establishment of a regulatory framework and development of technologies for recovery of valuable elements from battery waste. While lithium-ion batteries are mainly based on layered oxides and lithium iron phosphate chemistries, the variety of sodium-ion batteries is much more diverse, extended by a number of other polyanionic families (crystal types), such as NASICON (Na3V2(PO4)3), Na3V2(PO4)2F3−yOy, (0 ≤ y ≤ 2), KTiOPO4-type AVPO4X (A—alkali metal cation, X = O, F) and β-NaVP2O7, with all of them relying on vanadium and phosphorous—critical elements in a myriad of industrial processes and technologies. Overall, the greater chemical complexity of these vanadium-containing phosphate materials highlights the need for designing specific recycling approaches based on distinctive features of vanadium and phosphorus solution chemistry, fine-tuned for the particular electrodes used. In this paper, an overview of recycling methods is presented with a focus on emerging chemistries for SIBs. Full article
Show Figures

Figure 1

37 pages, 1617 KiB  
Review
Offshore Electrical Grid Layout Optimization for Floating Wind—A Review
by Magnus Daniel Kallinger, José Ignacio Rapha, Pau Trubat Casal and José Luis Domínguez-García
Clean Technol. 2023, 5(3), 791-827; https://doi.org/10.3390/cleantechnol5030039 - 26 Jun 2023
Cited by 3 | Viewed by 2448
Abstract
Electrical grid layout optimization should consider the placements of turbines and substations and include effects such as wake losses, power losses in cables, availability of different cable types, reliability-based power losses and operational/decommissioning cost besides the initial investment cost. Hence, optimizing the levelized [...] Read more.
Electrical grid layout optimization should consider the placements of turbines and substations and include effects such as wake losses, power losses in cables, availability of different cable types, reliability-based power losses and operational/decommissioning cost besides the initial investment cost. Hence, optimizing the levelized cost of energy is beneficial capturing long-term effects. The main contribution of this review paper is to identify the current works and trends on electrical layout optimization for offshore wind farms as well as to analyze the applicability of the found optimization approaches to commercial-scale floating wind farms which have hardly been investigated so far. Considering multiple subproblems (i.e., micrositing and cabling), simultaneous or nested approaches are advantageous as they avoid sequential optimization of the individual problems. To cope with this combinatorial problem, metaheuristics seems to offer optimal or at least close-to-optimal results while being computationally much less expensive than deterministic methods. It is found that floating wind brings new challenges which have not (or only insufficiently) been considered in present optimization works. This will also be reflected in a higher complexity and thus influence the suitability of applicable optimization techniques. New aspects include the mobility of structures, the configurations and interactions of dynamic cables and station-keeping systems, the increased likelihood of prevailing heterogeneous seabeds introducing priority zones regarding anchor and riser installation, the increased importance of reliability and maintainability due to stricter weather limits, and new floating specific wind farm control methods to reduce power losses. All these facets are crucial to consider when thoroughly optimizing the levelized cost of energy of commercial-scale floating offshore wind farms. Full article
Show Figures

Figure 1

25 pages, 3461 KiB  
Review
Moving towards Greener Road Transportation: A Review
by Nick Rigogiannis, Ioannis Bogatsis, Christos Pechlivanis, Anastasios Kyritsis and Nick Papanikolaou
Clean Technol. 2023, 5(2), 766-790; https://doi.org/10.3390/cleantechnol5020038 - 7 Jun 2023
Cited by 9 | Viewed by 3136
Abstract
Road transportation accounts for about 20% of the total GHG emissions in the EU. Nowadays, the substitution of conventional fossil fuel-based ICEs with electric engines, or their hybridization, operating along with Energy Storage Systems, seems to be the most appropriate measure to achieve [...] Read more.
Road transportation accounts for about 20% of the total GHG emissions in the EU. Nowadays, the substitution of conventional fossil fuel-based ICEs with electric engines, or their hybridization, operating along with Energy Storage Systems, seems to be the most appropriate measure to achieve reductions in both fuel consumption and GHGs. However, EVs encounter crucial challenges, such as long charging time and limited driving range. Hence, the transition to the mass adoption of EVs requires considerable effort and time. However, significant steps have been taken in the hybridization of road vehicles, with the aid of renewables and energy recovery/saving systems. In this context, this paper presents a comprehensive literature review of modern green technologies for GHG reduction that are applicable to road transportation, such as on-vehicle energy harvesting and recovery (e.g., thermal, kinetic, etc.) systems and the incorporation of RES into EV charging stations. The impact of road vehicles on the environment is discussed in detail, along with the EU roadmap towards the decarbonization of transportation. Next, methods and techniques for fuel consumption and GHG reduction are systematically presented and categorized into on-vehicle and off-vehicle ones. Finally, a future outlook on more environmentally friendly road transportation is presented. Full article
Show Figures

Figure 1

29 pages, 3467 KiB  
Review
Carbon Capture, Utilization, and Storage in Saline Aquifers: Subsurface Policies, Development Plans, Well Control Strategies and Optimization Approaches—A Review
by Ismail Ismail and Vassilis Gaganis
Clean Technol. 2023, 5(2), 609-637; https://doi.org/10.3390/cleantechnol5020031 - 15 May 2023
Cited by 16 | Viewed by 5994
Abstract
To mitigate dangerous climate change effects, the 195 countries that signed the 2015 Paris Agreement agreed to “keep the increase in average global surface temperature below 2 °C and limit the increase to 1.5 °C” by reducing carbon emissions. One promising option for [...] Read more.
To mitigate dangerous climate change effects, the 195 countries that signed the 2015 Paris Agreement agreed to “keep the increase in average global surface temperature below 2 °C and limit the increase to 1.5 °C” by reducing carbon emissions. One promising option for reducing carbon emissions is the deployment of carbon capture, utilization, and storage technologies (CCUS) to achieve climate goals. However, for large-scale deployment of underground carbon storage, it is essential to develop technically sound, safe, and cost-effective CO2 injection and well control strategies. This involves sophisticated balancing of various factors such as subsurface engineering policies, technical constraints, and economic trade-offs. Optimization techniques are the best tools to manage this complexity and ensure that CCUS projects are economically viable while maintaining safety and environmental standards. This work reviews thoroughly and critically carbon storage studies, along with the optimization of CO2 injection and well control strategies in saline aquifers. The result of this review provides the foundation for carbon storage by outlining the key subsurface policies and the application of these policies in carbon storage development plans. It also focusses on examining applied optimization techniques to develop CO2 injection and well control strategies in saline aquifers, providing insights for future work and commercial CCUS applications. Full article
Show Figures

Figure 1

25 pages, 2697 KiB  
Review
Vapor Compression Cycle: A State-of-the-Art Review on Cycle Improvements, Water and Other Natural Refrigerants
by Fadi Alsouda, Nick S. Bennett, Suvash C. Saha, Fatemeh Salehi and Mohammad S. Islam
Clean Technol. 2023, 5(2), 584-608; https://doi.org/10.3390/cleantechnol5020030 - 5 May 2023
Cited by 12 | Viewed by 12697
Abstract
Air conditioning and refrigeration have become necessary in modern life, accounting for more than 7.8% of greenhouse gases (GHG) emitted globally. Reducing the environmental impact of these systems is crucial for meeting the global GHG emission targets. Two principal directions must be considered [...] Read more.
Air conditioning and refrigeration have become necessary in modern life, accounting for more than 7.8% of greenhouse gases (GHG) emitted globally. Reducing the environmental impact of these systems is crucial for meeting the global GHG emission targets. Two principal directions must be considered to reduce the environmental impact of air conditioning systems. Firstly, reducing the direct effect by looking at less harmful refrigerants and secondly, reducing the indirect effect by searching for options to improve the system efficiency. This study presents the latest developments in the vapor compression cycle and natural refrigerants, focusing on water as a refrigerant. Natural refrigerants, and especially water, could be the ultimate solution for the environmental problems associated with the operation of vapor compression cycle (VCC) cooling systems, including ozone depletion (OD) and global warming (GW). Reducing the environmental impact of building cooling systems is essential, and the recent system improvements made to enhance the system coefficient of performance (COP) are thoroughly discussed in this paper. Though the cycle improvements discussed in this work are essential and could increase the system efficiency, they still need to solve the direct environmental impact of refrigerants. Accordingly, this paper suggests that natural refrigerants, including water, are the most suitable strategic choice to replace the current refrigerants in the refrigeration and air conditioning industry. Finally, this study reviews the latest VCC system improvements and natural refrigerants in order to guide interested researchers with solutions that may reduce the environmental impact of VCC systems and suggest future research areas. Full article
Show Figures

Figure 1

38 pages, 5173 KiB  
Review
Investigation of Hydrogen Production System-Based PEM EL: PEM EL Modeling, DC/DC Power Converter, and Controller Design Approaches
by Mohamed Koundi, Hassan El Fadil, Zakaria EL Idrissi, Abdellah Lassioui, Abdessamad Intidam, Tasnime Bouanou, Soukaina Nady and Aziz Rachid
Clean Technol. 2023, 5(2), 531-568; https://doi.org/10.3390/cleantechnol5020028 - 23 Apr 2023
Cited by 9 | Viewed by 5266
Abstract
The main component of the hydrogen production system is the electrolyzer (EL), which is used to convert electrical energy and water into hydrogen and oxygen. The power converter supplies the EL, and the controller is used to ensure the global stability and safety [...] Read more.
The main component of the hydrogen production system is the electrolyzer (EL), which is used to convert electrical energy and water into hydrogen and oxygen. The power converter supplies the EL, and the controller is used to ensure the global stability and safety of the overall system. This review aims to investigate and analyze each one of these components: Proton Exchange Membrane Electrolyzer (PEM EL) electrical modeling, DC/DC power converters, and control approaches. To achieve this desired result, a review of the literature survey and an investigation of the PEM EL electrical modeling of the empirical and semi-empirical, including the static and dynamic models, are carried out. In addition, other sub-models used to predict the temperature, gas flow rates (H2 and O2), hydrogen pressure, and energy efficiency for PEM EL are covered. DC/DC power converters suitable for PEM EL are discussed in terms of efficiency, current ripple, voltage ratio, and their ability to operate in the case of power switch failure. This review involves analysis and investigation of PEM EL control strategies and approaches previously used to achieve control objectives, robustness, and reliability in studying the DC/DC converter-PEM electrolyzer system. The paper also highlights the online parameter identification of the PEM electrolyzer model and adaptive control issues. Finally, a discussion of the results is developed to emphasize the strengths, weaknesses, and imperfections of the literature on this subject as well as proposing ideas and challenges for future work. Full article
Show Figures

Figure 1

21 pages, 4932 KiB  
Systematic Review
Machine Learning Applications in Renewable Energy (MLARE) Research: A Publication Trend and Bibliometric Analysis Study (2012–2021)
by Samuel-Soma M. Ajibade, Festus Victor Bekun, Festus Fatai Adedoyin, Bright Akwasi Gyamfi and Anthonia Oluwatosin Adediran
Clean Technol. 2023, 5(2), 497-517; https://doi.org/10.3390/cleantechnol5020026 - 19 Apr 2023
Cited by 18 | Viewed by 3125
Abstract
This study examines the research climate on machine learning applications in renewable energy (MLARE). Therefore, the publication trends (PT) and bibliometric analysis (BA) on MLARE research published and indexed in the Elsevier Scopus database between 2012 and 2021 were examined. The PT was [...] Read more.
This study examines the research climate on machine learning applications in renewable energy (MLARE). Therefore, the publication trends (PT) and bibliometric analysis (BA) on MLARE research published and indexed in the Elsevier Scopus database between 2012 and 2021 were examined. The PT was adopted to deduce the major stakeholders, top-cited publications, and funding organizations on MLARE, whereas BA elucidated critical insights into the research landscape, scientific developments, and technological growth. The PT revealed 1218 published documents comprising 46.9% articles, 39.7% conference papers, and 6.0% reviews on the topic. Subject area analysis revealed MLARE research spans the areas of science, technology, engineering, and mathematics among others, which indicates it is a broad, multidisciplinary, and impactful research topic. The most prolific researcher, affiliations, country, and funder are Ravinesh C. Deo, National Renewable Energy Laboratory, United States, and the National Natural Science Foundation of China, respectively. The most prominent journals on the top are Applied Energy and Energies, which indicates that journal reputation and open access are critical considerations for the author’s choice of publication outlet. The high productivity of the major stakeholders in MLARE is due to collaborations and research funding support. The keyword co-occurrence analysis identified four (4) clusters or thematic areas on MLARE, which broadly describe the systems, technologies, tools/technologies, and socio-technical dynamics of MLARE research. Overall, the study showed that ML is critical to the prediction, operation, and optimization of renewable energy technologies (RET) along with the design and development of RE-related materials. Full article
Show Figures

Figure 1

23 pages, 1983 KiB  
Review
Membranes and Integrated Membrane Operations as Clean Technologies in the Leather Industry
by Enrico Drioli and Alfredo Cassano
Clean Technol. 2023, 5(1), 274-296; https://doi.org/10.3390/cleantechnol5010016 - 16 Feb 2023
Cited by 5 | Viewed by 2987
Abstract
The leather industry is characterized by the production of a huge amount of wastewater with a high organic/inorganic charge, causing widespread water and soil pollution. Pressure-driven membrane operations and membrane bioreactors have long been proven to be a valid approach for the treatment [...] Read more.
The leather industry is characterized by the production of a huge amount of wastewater with a high organic/inorganic charge, causing widespread water and soil pollution. Pressure-driven membrane operations and membrane bioreactors have long been proven to be a valid approach for the treatment of tanning wastewaters aimed at the recovery of raw materials as well as for the removal of toxic and environmentally harmful substances. Such processes, opportunely integrated among themselves and/or with conventional physical-chemical and biological treatments, also provide useful protocols for the treatment of global wastewaters with significant advantages in terms of environmental protection, decrease of disposal costs, simplification of cleaning-up processes and saving of water and chemicals. This paper, as the state of the art, attempts to revise the potential and perspectives of membrane-based technologies in the leather industry with related applications in beamhouse, tanning and post-tanning operations as well as in the treatment of global wastewaters. Full article
Show Figures

Figure 1

23 pages, 1292 KiB  
Systematic Review
A Literature Review on Existing Methods and Indicators for Evaluating the Efficiency of Power-to-X Processes
by Natascha Eggers, Torsten Birth, Bernd Sankol, Lukas Kerpen and Antonio Hurtado
Clean Technol. 2023, 5(1), 167-189; https://doi.org/10.3390/cleantechnol5010010 - 31 Jan 2023
Cited by 2 | Viewed by 2756
Abstract
The challenges posed by climate change have prompted significant growth in efficiency evaluation and optimization research, especially in recent years. This has spawned a variety of heterogeneous methods and approaches to the assessment of technical processes. These methods and approaches are rarely comparable [...] Read more.
The challenges posed by climate change have prompted significant growth in efficiency evaluation and optimization research, especially in recent years. This has spawned a variety of heterogeneous methods and approaches to the assessment of technical processes. These methods and approaches are rarely comparable and are usually only applicable to specific sectors. This paper provides an overview of the literature on efficiency assessment methods and KPIs, leading to a more manageable selection of an appropriate method with special regard to energy system integration technologies. In addition to reviewing the literature systematically, this paper examines existing methods and indicators’ applicability to and significance for efficiency optimization. In this context, a holistic approach to process design, evaluation, and improvement is given with particular regard to power-to-X systems. Within the framework of the study, three overarching goals could be defined as levels of efficiency evaluation of power-to-X systems: 1. identification of the process (steps) with the most significant optimization potential, 2. identification of the process phases with the greatest optimization potential (timewise considered), and 3. derivation of specific recommendations for action for the improvement of a process. For each of these levels, the most suitable evaluation methods were identified. While various methods, such as life cycle assessment and physical optimum, are particularly suitable for Level 1 and Level 2, for Level 3, even the best-identified methods have to be extended on a case-by-case basis. To address this challenge, a new approach to a holistic evaluation of power-to-X systems was developed based on the study’s findings. Full article
Show Figures

Figure 1

Back to TopTop