General
A section of Metals (ISSN 2075-4701).
Section Information
Editorial Board
Special Issues
Following special issues within this section are currently open for submissions:
- Green and Intelligent Steelmaking Technologies with Low Carbon Emissions (Deadline: 20 November 2024)
- Recent Advances in Metal Processing and Manufacturing: Technique, Method, Performance, and Microstructure (Deadline: 25 November 2024)
- Women’s Special Issue Series: Metals (Deadline: 25 November 2024)
- Mechanical Behavior of Metallic Nanomaterials (Deadline: 30 November 2024)
- Brazing and Diffusion Welding of New Materials and Dissimilar Materials (Deadline: 30 November 2024)
- Superalloys and Ceramic Matrix Composites Behaviors under Extreme Conditions (Deadline: 30 November 2024)
- Non-destructive Evaluation, Structural Health Monitoring, Vibration Analysis and Maintenance of Bridges with Steel Elements (2nd Edition) (Deadline: 30 November 2024)
- Mechanical Behaviors and Interfacial Segregation Phenomena in Metallic Materials: Simulation, Theory, and Characterization (Deadline: 30 November 2024)
- Hydrogen Embrittlement of Metals and Alloys (Deadline: 30 November 2024)
- Alloy Design and Its Performance Trade-Offs (Deadline: 15 December 2024)
- Forming and Properties of Lightweight Alloys (Deadline: 20 December 2024)
- Advances in Creep Behavior of Metallic Materials (Deadline: 20 December 2024)
- Structure and Mechanical Properties of Aluminum Alloys (Deadline: 31 December 2024)
- Advances in the Design and Behavior Analysis of High-Strength Steels (Deadline: 31 December 2024)
- Advances in Electromagnetic Processing of Metallic Materials (Deadline: 31 December 2024)
- Friction and Wear of Metallic Materials—State of the Art (Deadline: 31 December 2024)
- Surface Modification and Treatment of Metals (Deadline: 31 December 2024)
- Microstructure Evolution and Mechanical Properties of Magnesium Alloys—2nd Edition (Deadline: 31 December 2024)
- Advances in High-Strength Low-Alloy Steels (2nd Edition) (Deadline: 31 December 2024)
- Recent Advances in Metal-Ion Batteries (Deadline: 31 December 2024)
- Design, Processing and Characterization of Metals and Alloys (Deadline: 31 December 2024)
- Laser Ablation and Precision Cutting of Sheet Metal (Deadline: 31 December 2024)
- Microstructural, Mechanical and Magnetic Properties of Metallic Microwires (Deadline: 31 December 2024)
- Advances in Metallic Nuclear Reactor Materials (Deadline: 31 December 2024)
- Advanced Characterization and Testing of Nuclear Materials (Deadline: 31 December 2024)
- Laser Processing Technology and Principles of Metal Materials (Deadline: 31 December 2024)
- Advances in Nanoporous Metallic Materials (2nd Edition) (Deadline: 10 January 2025)
- Advances in Nanocrystalline Soft Magnetic Materials for Smart Applications (Deadline: 20 January 2025)
- Numerical and Experimental Advances in Innovative Manufacturing Processes (2nd Edition) (Deadline: 20 January 2025)
- Advances in Laser Additive Manufacturing Processes on Metallic Materials (Deadline: 20 January 2025)
- Rare-Earth Metals, Alloys and Oxides: Preparation, Characterization, Properties and Applications (Deadline: 20 January 2025)
- Recent Developments of Non-Ferrous Alloys: Processing, Microstructure and Properties (2nd Edition) (Deadline: 20 January 2025)
- Thermodynamic Studies in Low-Carbon Sustainable Metallurgical Processes (Deadline: 25 January 2025)
- Recent Advances of Diffusion Thermodynamics and Kinetics in Metallic Materials (Deadline: 30 January 2025)
- Advances in Constitutive Modeling for Metals and Alloys (Deadline: 30 January 2025)
- Powder Metallurgy and Additive Manufacturing of Metals and Alloys (Deadline: 31 January 2025)
- Green Super-Clean Steels (Deadline: 31 January 2025)
- Development, Characterization and Properties of High-Performance Aluminum Alloys (Deadline: 31 January 2025)
- Latest Advances in Light-Weight Alloys and Composites (Deadline: 31 January 2025)
- Microstructural Characteristics and Mechanical Behavior of Particle-Reinforced Copper-Based Composites (Deadline: 15 February 2025)
- Light Alloy and Its Application (2nd Edition) (Deadline: 20 February 2025)
- Oxidation Mechanism and Behavior Analysis of Surface Coatings on Metal Materials (Deadline: 20 February 2025)
- Novel Insights into Wrought Magnesium Alloys (Deadline: 25 February 2025)
- Advances in Machining Process of Metallic Materials (Deadline: 28 February 2025)
- Manufacture, Properties and Applications of Advanced Nuclear Alloys (Deadline: 28 February 2025)
- Purification Metallurgy in Steelmaking (Deadline: 28 February 2025)
- Synthesis, Processing and Applications of New Forms of Metals (Deadline: 31 March 2025)
- Transformation Texture and Its Prediction in Cubic and Hexagonal Metals (Deadline: 31 March 2025)
- Microstructure, Tensile Properties and Creep Behavior of Metallic Materials (Deadline: 30 April 2025)
- Advanced Lightweight Materials: Processing, Characterization and Applications (Deadline: 30 April 2025)
- Deformation Behavior and Microstructure Evolution of Alloys (Deadline: 30 April 2025)
- Manufacture, Properties and Applications of Light Alloys (Deadline: 10 May 2025)
- Microstructure, Deformation and Fatigue Behavior in Metals and Alloys (Deadline: 23 May 2025)
- Surface Modification and Coatings of Metallic Materials (Deadline: 25 May 2025)
- Superior Strength–Ductility Combination of Heterostructured Metallic Materials (Deadline: 25 May 2025)
- Additive Manufacturing and Processing of Metallic Alloys and Composites (Deadline: 30 May 2025)
- Recent Advances in Residual Stress Research in Metallic Materials (Deadline: 31 May 2025)
- Machine Learning in Metal Additive Manufacturing (Deadline: 30 June 2025)
- Processing, Microstructure, and Properties of Nonferrous Metals and Alloys (Deadline: 31 October 2025)