Next Article in Journal
Phytocompounds and Nanoformulations for Anticancer Therapy: A Review
Previous Article in Journal
Coupling Electro-Fenton and Electrocoagulation of Aluminum–Air Batteries for Enhanced Tetracycline Degradation: Improving Hydrogen Peroxide and Power Generation
Previous Article in Special Issue
Catalytic Activity of Rare Earth Elements (REEs) in Advanced Oxidation Processes of Wastewater Pollutants: A Review
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Molecules
Volume 29
Issue 16
10.3390/molecules29163783
molecules-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Degradation Acyclovir Using Sodium Hypochlorite: Focus on Byproducts Analysis, Optimal Conditions and Wastewater Application

by
Antonio Medici
1,
Mauro De Nisco
2,
Giovanni Luongo
3,
Giovanni Di Fabio
1,
Marcello Brigante
4,* and
Armando Zarrelli
1,*
1
Department of Chemical Sciences, University of Naples Federico II, 80126 Naples, Italy
2
Department of Sciences, University of Basilicata, Viale dell’Ateneo Lucano, 85100 Potenza, Italy
3
Associazione Italiana per la Promozione delle Ricerche su Ambiente e Salute Umana, 82030 Dugenta, Italy
4
Institut de Chimie de Clermont-Ferrand, Université Clermont Auvergne, CNRS, Clermont Auvergne INP, F-63000 Clermont-Ferrand, France
*
Authors to whom correspondence should be addressed.
Molecules 2024, 29(16), 3783; https://doi.org/10.3390/molecules29163783 (registering DOI)
Submission received: 27 June 2024 / Revised: 15 July 2024 / Accepted: 30 July 2024 / Published: 9 August 2024
(This article belongs to the Special Issue Degradation of Drugs and Organic Pollutants in Wastewater)
Browse Figures
Versions Notes

Abstract

:
In recent years, the environmental impact of pharmaceutical residues has emerged as a pressing global concern, catalyzed by their widespread usage and persistence in aquatic ecosystems. Among these pharmaceuticals, acyclovir (ACV) stands out due to its extensive prescription during medical treatments for herpes simplex virus, chickenpox, and shingles, as well as its heightened usage amidst the COVID-19 pandemic. ACV is excreted largely unchanged by the human body, leading to significant environmental release through wastewater effluents. The urgency of addressing ACV’s environmental impact lies in its potential to persist in water bodies and affect aquatic life. This persistence underscores the critical need for effective degradation strategies that can mitigate its presence in aquatic systems. This study focuses on employing sodium hypochlorite as an oxidative agent for the degradation of ACV, leveraging its common use in wastewater treatment plants. Our research aims to explore the kinetics of ACV degradation, identify and characterize its degradation byproducts, and optimize the conditions under which complete degradation can be achieved. By assessing the efficiency of sodium hypochlorite in real wastewater samples, this study seeks to provide practical insights into mitigating ACV contamination in aquatic environments. The novelty of this research lies in its comprehensive approach to understanding the degradation pathways of ACV and evaluating the feasibility of using sodium hypochlorite as a sustainable solution in wastewater treatment. By addressing the environmental concerns associated with ACV and offering practical solutions, this study contributes to the broader goal of sustainable pharmaceutical waste management and environmental stewardship.

1. Introduction

The use of substances for pharmaceutical purposes [1,2,3,4], as disinfectants [5,6,7,8], or clinically for diagnostic purposes [9], for cosmetic products [4,8], or personal hygiene [3,4,8], is extensive and widespread in all areas of daily and professional life. The pharmaceutical industry provides numerous drugs to the community, which are used in human and veterinary medicine for therapeutic, prophylactic, and auxiliary purposes. Pharmaceutical substances, once administered to patients or animals, can be metabolized wholly or partially in the body and eliminated through feces or urine as inactive metabolites, active metabolites, or unchanged substances. Thus, a large quantity of pharmacologically active ingredients is released into the environment, prompting longstanding reflection within the scientific community regarding their fate and environmental impact [10,11,12].
Agricultural practises involving the reuse of solid and liquid manures from livestock farming and sewage sludges to recover nitrogen compounds for soil fertilization may contribute to the spread of drugs in terrestrial environments and, under certain conditions, their entry into water bodies [13,14].
To limit our impact on the environment as much as possible, it is essential to treat domestic and industrial wastewater before it can be discharged into waterways or reused. This role of treating polluted water is performed by wastewater treatment plants (WWTPs), whether internal (as in the case of some industries, where a site may have its own treatment plant) or external (covered or open-air). It is supposed that due to incomplete or completely absent removal processes, with the use of wastewaters, some biologically active substances may be delivered through aqueducts, posing a risk of potential allergic sensitization, especially in infants and the elderly. In several studies, the improvement of organic pollutants degradation using humic substances [15] or physicochemical approaches such as absorption and advanced oxidation processes is proposed for wastewater pollutants removal [16,17,18,19,20,21,22]. Therefore, the ability of removal processes to reduce the presence of substances must be carefully evaluated. Data from the international literature seem to indicate the reassuring suitability of the most common oxidative purification techniques (chemical, physical, and biological, considered individually or in combination with each other) for degrading pharmaceutical substances. However, the use of oxidants in low quantities or in single oxidation cycles [23,24,25,26], as well as the recent proliferation of removal processes (ozonation, UV rays, microfiltration) [27,28,29], all aimed at minimally altering the chemical and sensorial characteristics of the treated water to favour its consumption, could lead to the persistence of pollutants in the effluents of wastewater treatment plants or drinking-water purification plants.
Acyclovir (or aciclovir), often abbreviated as ACV, is an antiviral drug capable of interfering with virus DNA synthesis and is primarily used to treat herpes simplex virus infections, chickenpox, and shingles [30]. Other uses include preventing cytomegalovirus infections after transplantation and severe complications of Epstein–Barr virus infection [31]. From a chemical standpoint, Acyclovir is an acyclic analogue of guanosine, one of the nucleosides that make up DNA. Acyclovir is available in numerous medicines administered topically, orally, and intravenously and is one of the most used antiviral drugs [32,33,34,35]. Its consumption has steadily increased since the early 1990s, from around 100,000 kg/p.a. in 1990 to approximately 300,000 just a decade later. It is presumed that consumption further surged during the COVID-19 pandemic [36]. Acyclovir is poorly soluble in water and is characterized by a very short residence time in the human body. High doses are generally prescribed, considering that only 15–20% of the used product is metabolized or accumulated in the human body, while the remaining 80–85% is excreted unchanged through feces and urine [37]. Thus, given its extensive use, it is not surprising to find it in surface waters and effluents from wastewater treatment plants, but its presence in groundwater and even drinking water is certainly concerning. In some industrial discharges, concentrations of up to 2600 mg/L have been found [38], although these are undoubtedly isolated cases linked to criminal management of industrial plants. However, it has been found in effluents from wastewater treatment plants at concentrations of up to 2500 ng/L, as in some Japanese plants [39] or up to 2200 ng/L in Germany [40] and up to almost 2000 ng/L in China [41]. In the United States, it has been detected in surface waters at concentrations of up to 1600 ng/L [42]. It has also been found in groundwater at concentrations of over 130 ng/L [42] and in drinking water at concentrations of up to 40 ng/L [43]. However, these technologies seem unable to achieve complete mineralization of the molecule, and on the other hand, there are few data on any chlorine-based treatments [44]. Indeed, its presence has been measured between 400 and 1360 ng/L in effluents from wastewater treatment plants [42].
The purpose of this study is to investigate the possible fate of Acyclovir when subjected to treatment with sodium hypochlorite, the most used oxidation reaction in wastewater treatment plants. This study aimed to determine the optimal processing conditions to achieve the highest percentage of Acyclovir mineralization and the identification of degradation products. Of these, 11 were identified and quantified, for which a plausible mechanism of formation was proposed.

2. Results and Discussion

2.1. Degradation Experiments

The experimental procedures for the oxidation of ACV were conducted assuming conditions that ensure the maximum degradation of ACV, both in analytical and preparative settings. A solution of ACV at a concentration of 10−5 M was treated for 20 min in the presence of equimolar hypochlorite at room temperature. Subsequently, experiments were repeated using ACV concentrations exceeding 10−3 M, employing a significantly higher ratio of hypochlorite (hypochlorite–ACV: molar ratio of 7:1) to ensure effective degradation of the target contaminant and to yield adequate quantities of degradation products (DPs) for the subsequent structural elucidation. Under these conditions, two experiments were carried out which lasted 20 and 60 min, respectively. The resulting DPs (depicted in Figure 1) were purified by column chromatography and HPLC and identified by MS analyses or spectrophotometrically by comparison with commercially available authentic samples.

2.2. Structure Elucidation of Degradation Byproducts DP1–DP11

In ACV treatment, the degradation was monitored by HPLC. The concentration of DP1–DP11 (Figure 1) was at a maximum after 20 min and ranged from 0.3 to 4.9% (Table 1).
Table 1 shows the percentages in which the 11 isolated byproducts were obtained in the two different chlorination reactions.
DPs were isolated by chromatographic processes (Scheme 1) and identified by employing MS analyses or spectrophotometrically by comparison with commercially available authentic samples. These studies often involve the structural determination of the degradation byproducts obtained through one- and two-dimensional NMR analyses. In this case, NMR was not very useful given that the DPs obtained were low-molecular-weight compounds, some of which were very soluble in water (DP7–DP11) and difficult to isolate, and with few diagnostic signals for NMR studies. The use of authentic samples allowed us to identify the DPs obtained, quantify them using specific calibration curves, and then further confirm their exact identification using MALDI-TOF mass spectrometry, also working with samples that were not necessarily completely pure.
Figure 2 and Figure 3 show a plausible mechanism of the DPs formation.
In general, given the nature of the isolated and/or identified degradation byproducts, it reasonable to hypothesize that the initial step in the oxidation reaction of ACV involves the hydrolysis of its glycol sidechain, resulting in the formation of the degradation byproduct DP1.
Indeed, ACV could undergo oxidation at the carbon C-13, resulting in the formation of intermediates I1 and I2, respectively (Figure 2).
Decarboxylation of intermediate I2 could yield the intermediate I3, which could be oxidized at the carbon C-10 to form the corresponding intermediates I4 and I5. Hydrolysis of the last intermediate could provide DP1 as the final product.
The product DP1, through tautomerism, could generate its protonated form at the nitrogen N-1 on the pyridine ring and exist in equilibrium with its imine form. The hydrolysis of the latter would lead to the formation of product DP2. This byproduct could undergo oxidation at the carbon C-8 of the imidazole ring to form intermediate I6, which could then yield, through further oxidation, the product DP3. By hydrolysis, the latter could provide the compound I7, which has not been isolated.
Product DP2 could also undergo the addition of hypochlorous acid to the double bond between carbons C-4 and C-5, resulting in the formation of intermediate I8. Subsequently, through intramolecular epoxidation, intermediate I8 gives rise to intermediate I9. This latter can then undergo hydrolysis and intramolecular oxidation, forming the open intermediate I11 through the cyclic intermediate I10. Intermediate I11 may undergo cleavage of an amide bond via two possible pathways: pathway a leads to the formation of product DP7, while pathway b results in product DP10. DP7 can subsequently undergo hydrolysis to one of the two amide functions to yield product DP8, which then may also undergo hydrolysis at the second amide function to produce DP9. Alternatively, intermediate I11 might undergo an intramolecular attack by one of the two amino functions on one of the carbonyl carbons, as indicated by pathway c, to generate compound I12 (that was not isolated) or by the other amino function, following the pathway d, to form product DP6. Hydrolysis of the terminal amide bonds, as indicated by pathway e, leads to the formation of DP5.
The DP1 is a key product that, in the protonated form at the nitrogen N-3 on the pyridine ring, could undergo an oxidation reaction at the double bond between carbons C-4 and C-5, resulting in the formation of intermediate I13 (Figure 3). This intermediate, through intramolecular epoxidation, could give rise to intermediate I14, that, through subsequent oxidation and intramolecular hydrolysis, could give rise to intermediate I15. Upon hydrolysis of the imine function of this last one, intermediate I16 could be obtained, and the following pathway f, could undergo an intramolecular attack by one of its two amine functions on one carbonyl function, forming DP4 and carbamic acid. The latter would subsequently degrade to carbon dioxide and ammonia. Hydrolysis of one of the two terminal amide bonds, as indicated by the pathway g, could lead to intermediate I17 and carbamic acid. From I17, hydrolysis of the imine bond, as indicated by the pathway l, could yield products DP7 and DP10.
Alternatively, intermediate I16 could undergo hydrolysis of its other amide bond, as indicated by pathway h, leading to the formation of product DP8 and intermediate I18. This last one, upon hydrolysis of the imine bond, could create the product DP11, while the hydrolysis of the imine bond of its tautomer I19 could explain the formation of product DP10. DP10 could also be obtained through the hydrolysis of DP11.
Finally, the hydrolysis of the amide bond indicated by pathway i could explain the obtaining of the intermediate I20, from which it would be easy to derive many of the isolated products.
With the first chlorination, which lasted 20 min, about one-third or slightly more of the starting product was recovered (Table 1), while the DP1–DP11 products were isolated in a total amount equal to about 30% of the reacted ACV. The most abundant product was DP1 (just over 4%), and the least abundant (less than 0.5%) was DP11. It is assumed that the unrecovered ACV, about 70% of the initial amount, was either mineralized or transformed into minor products that were not isolated and/or identified.
If the reaction times are tripled under the same experimental conditions, the amount of unrecovered ACV decreases to around 4%, and the total amount of DP1–DP11 products accounts for approximatively 19% of the ACV. In this case, the most abundant product was DP10, with a percentage just below 5%.

2.3. Spectral Data and Description of the Isolated Byproducts

The name, physical appearance, chemical formula, theoretical molecular weight, and experimental molecular weight obtained for the pseudo-molecular ion [M + H]+ are shown in Table 2.
A total of 11 degradation byproducts have been isolated from Acyclovir; of these, the first 3 (DP1−DP3) retain the purine ring. In particular, DP1 is the degradation byproduct deriving from the loss of the methyl glycol side-chain of the starting molecule; DP2 was devoid of the side-chain and the amino function linked to the carbon C-2 of the pyrimidine ring results oxidized to the corresponding carbonyl group; while, finally, DP3 is similar to DP2 but the carbon C-8 of the imidazole ring results also oxidized to the corresponding carbonyl group (Figure 1).
DP4 and DP5 products retain only the pyrimidine nucleus of the starting product. Evidently, the latter has undergone the cleavage of bonds C-4/N-9 and C-5/N-7 and oxidation to the carbon C-2 in the case of DP4 and to the carbons C-2 and C-4 in the case of DP5.
DP6 is actually a derivative of only the imidazole ring of ACV, in that all the carbons are oxidized.
The last five products, namely DP7−DP11, are characterized by a low molecular weight and high water-solubility. Among these, DP9 can be considered in all respects to be the oxidation product obtained from the glycol side-chain. It is the last product before complete mineralization occurs with the formation of carbon dioxide and water. The byproducts DP7 and DP8 are, in principle, the mono- and di-amide derivatives of DP9. However, it is easier to imagine that they occurred from the degradation of the aromatic nucleus of ACV, as hypothesized in the mechanisms proposed in Figure 2 and Figure 3.

2.4. Degration Using Different HOCl:ACV Ratios and in Wastewater

To investigate the degradation of ACV, a series of experiments were conducted using a fixed concentration of 10⁻5 M ACV while varying the concentrations of hypochlorite. In these experiments, 1 mL samples were withdrawn at fixed time intervals and immediately mixed with 10 µL of 0.1 M Na₂S₂O₃ to quench the hypochlorite and prevent further oxidation before analysis [44]. The degradation efficiency of ACV after 30 s of reaction, at which point the degradation had reached a plateau, is presented as a function of different hypochlorite–ACV ratios in Figure 4. The results indicate a linear increase in ACV degradation efficiency from 17% to 98% as the hypochlorite–ACV ratio increased from 0.5 to 5. Beyond this ratio, the degradation efficiency reached a plateau, indicating that higher concentrations of hypochlorite did not significantly enhance the degradation process further. This behaviour can be attributed to the saturation point where all available ACV molecules have reacted with the hypochlorite. In addition, we explored the impact of using wastewater (Table S1) instead of Milli-Q water to prepare the solutions. It was observed that the degradation efficiency was similar in both cases; however, there was a slight inhibition in the degradation efficiency at lower concentrations of hypochlorite when wastewater was used. This inhibition is likely due to the presence of dissolved organic matter (DOM) in the wastewater, which competes with ACV for reaction with hypochlorite. DOM can react with hypochlorite, thus reducing the amount of hypochlorite available to degrade ACV. Despite this competitive interaction, complete degradation of ACV was still observed when higher concentrations of hypochlorite, specifically five to seven times more, were used.

3. Materials and Methods

3.1. Drug and Reagents

Acyclovir and sodium hypochlorite solution (6–14% active chlorine) were purchased from Merck (Darmstadt, Germany). Solvents were purchased from Merck (Darmstadt, Germany) and were of HPLC grade and used as received. All other chemicals were of analytical grade and supplied by Merck.

3.2. Apparatus and Equipment

Kieselgel 60 (230–400 mesh, Merck, Darmstadt, Germany) was used for column chromatography (CC). HPLC analysis utilized a Shimadzu LC-8A system equipped with a Shimadzu SPD-10A VP UV-VIS detector (Shimadzu, Milan, Italy). MALDI-TOF mass spectrometric analyses were conducted on a Voyager-De Pro MALDI mass spectrometer (PerSeptive Biosystems, Framingham, MA, USA). UV-vis spectra were recorded on a JASCO V-750 UV–Visible Spectrophotometer. Lyophilization of samples was performed using a Lyovapor TM-200 (Buchi, Cornaredo (MI), Italy), with a compressor featuring a cooling capacity of 1.97 kW for 50 Hz and minimum condenser temperature of −55 °C.

3.3. Chlorination Reaction

A solution of ACV at a concentration of 10−5 M was treated with a 10% hypochlorite solution (hypochlorite–ACV: molar ratio of 1:1) for 20 min at room temperature. The solution initially had a pH close to neutral, which, after the addition of hypochlorite, reached approximately 8.0. The presence of ACV was determined spectrophotometrically with absorbance peaks measured at 252 nm [45] using a previously prepared calibration curve. Under these conditions, the byproducts DP1–DP11 formed were too low in abundance to isolate.
Preparatory experiments were thus conducted, using an ACV solution at a concentration higher than 10−3 M, treated with a 10% hypochlorite solution. The oxidant was added slowly, dropwise, under magnetic stirring, at room temperature and in a molar ratio approximately seven times higher than that of ACV itself. The progress of the reaction was monitored approximately every 10 min by taking aliquots of the solution, which was immediately extracted with ethyl acetate. The organic phase was then analyzed by HPLC. The reaction was stopped after 60 min to ensure maximum degradation of the ACV and the formation of its degradation products. The resulting solution was immediately frozen in a bath of acetone and dry ice and then freeze-dried.
The crude reaction was analyzed by HPLC, comparing the chromatographic profile with that obtained from the corresponding experiments under analytical conditions and identifying the common degradation byproducts.

3.4. Product Isolation Procedure

Acyclovir (0.85 g, 3.77 mmol) dissolved in MilliQ water (850 mL) was treated with a 10% hypochlorite solution, the concentration of which was determined via iodometric titration (hypochlorite–ACV: molar ratio of 7:1) at room temperature. The pH of the solution increased from an initial value of 7.0 to 8.0 within 3 min and remained constant for the duration of the experiment.
Two different chlorination reactions were carried out, with the first stopped after 20 min and the second after 60 min. Immediately after the appointed times, the solutions were frozen at −78 °C and immediately reduced in volume by freeze-drying. Each residue was extracted with ethyl acetate. The ethyl acetate fractions (523 mg after 20 min and 234 mg after 60 min) were chromatographed on silica gel column chromatography (CC) using a gradient of chloroform–acetone to give 11 fractions (Scheme 1). The fraction Fr. 3, eluted with 95:5 chloroform–acetone, was purified by HPLC using a reversed-phase column Phenomenex Synergi 10 μm 110 Å C18 (250 × 10 mm) column and eluted with 40:60 water–acetonitrile to give compounds DP5 and DP6. The fraction Fr. 5, eluted with 85:15 chloroform–acetone, contained compound DP4, which was purified by HPLC using the same column as fraction Fr. 3 and eluted with 50:50 water–acetonitrile. The fraction Fr. 6, eluted with 75:25 chloroform–acetone, was rechromatographed on silica gel CC eluted with a gradient of chloroform–methanol, and 8 fractions were obtained. The fraction Fr. 6.3, eluted with 70:30 chloroform–methanol, contained the unreacted ACV. The fraction Fr. 7, eluted with 65:35 chloroform–acetone, was chromatographed on reversed-phase silica gel CC with water and acetonitrile, and 5 fractions were obtained. Fraction 7.4, eluted with 5:95 water–acetonitrile, was separated on Sep-Pak RP-18 with methanol and the eluate Fr. 7.4.M was purified by HPLC using a reversed-phase column Phenomenex Luna 5 μm C18(2) (250 × 10 mm), eluted with potassium phosphate buffer (50 mM, pH 1.5), to create DP1 and DP2. The fraction Fr. 10, eluted with 50:50 chloroform–acetone, was rechromatographed on silica gel CC eluted with a gradient of ethyl acetate–methanol, and 6 fractions were obtained. The fraction Fr. 10.3, eluted with 85:15 ethyl acetate–methanol, contained compound DP3.
The aqueous phase obtained after the extraction with ethyl acetate was immediately stored in a dark glass bottle with a Teflon cap at 4 °C. An aliquot of this solution was acidified to pH 2 with 0.1% sulfuric acid. The acidified solution was then subjected to chromatographic analysis under ion-exchange conditions using a column Dionex IonPac ICE-AS1 (9 × 250 mm, 7.5 μm particle, Dionex, Sunnyvale, CA, USA). The optimal mobile phase was a mixture of 5:95 acetonitrile–0.1% H2SO4 at a flow rate of 0.8 mL/min. The sample was prepared in 30:70 acetonitrile–H2O with an injection volume of 10 µL and detection was performed at 205 nm. In this way, products DP7–DP9 were identified by comparison with commercial references and quantified by interpolation with their respective calibration curves, obtained using five different solutions of compound DP7 in concentrations between 2 × 10−6 and 7 × 10−5 M and five different solutions of DP8 and DP9 compounds in concentration between 5.5 × 10−6 and 2 × 10−4 M.
The qualitative and quantitative determination of urea (DP10) was carried out according to a slightly modified version of the protocol described by Langenfeld et al. [46]. Urea was determined by reacting an aliquot of the aqueous solution with diacetyl monoxime in an acidic solution of H2SO4/H3PO4 under heat. The resulting species were then complexed with thiosemicarbazide in the presence of ferric chloride. The pink-coloured complex formed has a maximum absorption at 520 nm, which is proportional to the concentration of urea. Its calibration curve was obtained using five different solutions in concentrations between 1 × 10−3 and 5 × 10−3 M.
A further aliquot of the aqueous phase (50 mL) was lyophilized and then re-dissolved in MilliQ water. The fraction was analyzed via HPLC using a Luna NH2 5 μm column (250 × 4.6 mm, Phenomenex, Bologna, Italy), with an eluent consisting of a solution of 85:15 acetonitrile–water. Detection was performed at a wavelength of 195 nm using a UV detector [47]. The product DP11 was identified by comparison with a commercial reference and quantified by interpolation using the appropriate calibration curve, obtained using five different solutions in concentrations between 9.7 × 10−6 and 4.4 × 10−5 M.

4. Conclusions

In conclusion, our study highlights the transformations of ACV because of chlorination, the most used oxidation method in wastewater treatment systems. ACV is an emerging microcontaminant, present even in surface waters and, in some cases, even in drinking water, with the suspicion that its presence, given its widespread use (especially during the COVID-19 pandemic), may constantly increase over the coming years. The chlorination reaction could prove to be a convenient method for treating wastewater to eliminate this pollutant and others that are structurally similar. In fact, while 11 degradation products were isolated, mostly identified through mass spectrometry studies or by comparison with commercially available products, the presence of unaltered recovered Acyclovir decreased from 34% to just 4% by extending the reaction times from 20 to 60 min. The degradation products were obtained in percentages ranging from 0.3% to 4.9%, with a transformation percentage of all isolated byproducts of about 29% for a 20 min chlorination and 19% for a 60 min reaction. A plausible mechanism for their formation has been proposed in relation to the isolated products. Finally, experiments using different ratios of hypochlorite in MilliQ and wastewater highlight the relevance of this work.

Supplementary Materials

The following supporting information can be downloaded at https://www.mdpi.com/article/10.3390/molecules29163783/s1. Table S1. Wastewater physico-chemical characteristics.

Author Contributions

A.M. and G.L. performed the oxidation experiments; M.D.N., G.D.F. performed supervision and writing—review and editing; A.Z. designed the research study, performed the supervision and writing—original draft preparation, and wrote the final version of the manuscript. M.B. was involved in supervision and wrote the final version of the manuscript. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Data are contained within the article.

Acknowledgments

This research was supported by AIPRAS-Onlus (Associazione Italiana per la Promozione delle Ricerche sull’Ambiente e la Salute umana) for the grants in support of this investigation.

Conflicts of Interest

The authors declare no conflicts of financial interest.

References

  1. WHO Model List of Essential Medicines 18th list (April 2013) (Final Amendments–October 2013). Available online: https://iris.who.int/bitstream/handle/10665/93142/EML_18_en?sequence=1 (accessed on 15 March 2024).
  2. Available online: https://nida.nih.gov/research-topics/commonly-used-drugs-charts (accessed on 15 March 2024).
  3. Hoyett, Z. Pharmaceuticals and Personal Care Products: Risks, Challenges, and Solutions; InTech: London, UK, 2018. [Google Scholar] [CrossRef]
  4. Anand, U.; Adelodun, B.; Cabreros, C.; Kumar, P.; Suresh, S.; Dey, A.; Ballesteros, F.; Bontempi, E. Occurrence, transformation, bioaccumulation, risk and analysis of pharmaceutical and personal care products from wastewater: A review. Environ. Chem. Lett. 2020, 20, 3883–3904. [Google Scholar] [CrossRef]
  5. More, S.J. European perspectives on efforts to reduce antimicrobial usage in food animal production. Ir. Vet. J. 2020, 73, 2. [Google Scholar] [CrossRef] [PubMed]
  6. Tiseo, K.; Huber, L.; Gilbert, M.; Robinson, T.P.; Van Boeckel, T.P. Global trends in antimicrobial use in food animals from 2017 to 2030. Antibiotics 2020, 9, 918. [Google Scholar] [CrossRef]
  7. Van Boeckel, T.P.; Brower, C.; Gilbert, M.; Grenfell, B.T.; Levin, S.A.; Robinson, T.P.; Teillant, A.; Laxminarayan, R. Global trends in antimicrobial use in food animals. Proc. Natl. Acad. Sci. USA 2015, 112, 5649–5654. [Google Scholar] [CrossRef]
  8. Lompo, P.; Agbobli, E.; Heroes, A.S.; Van den Poel, B.; Kühne, V.; Kpossou, C.M.G.; Zida, A.; Tinto, H.; Affolabi, B.; Jacobs, J. Bacterial contamination of antiseptics, disinfectants, and hand hygiene products used in healthcare settings in low-and middle-income countries—A systematic review. Hygiene 2023, 3, 93–124. [Google Scholar] [CrossRef]
  9. Broza, Y.Y.; Zhou, X.; Yuan, M.; Qu, D.; Zheng, Y.; Vishinkin, R.; Khatib, M.; Wu, W.; Haick, H. Disease detection with molecular biomarkers: From chemistry of body fluids to nature-inspired chemical sensors. Chem. Rev. 2019, 119, 11761–11817. [Google Scholar] [CrossRef] [PubMed]
  10. Rathi, B.S.; Kumar, P.S.; Vo, D.V.N. Critical review on hazardous pollutants in water environment: Occurrence, monitoring, fate, removal technologies and risk assessment. Sci. Total Environ. 2021, 797, 149134. [Google Scholar] [CrossRef] [PubMed]
  11. Available online: https://www.epa.gov/international-cooperation/persistent-organic-pollutants-global-issue-global-response (accessed on 15 March 2024).
  12. Jones, K.C. Persistent organic pollutants (POPs) and related chemicals in the global environment: Some personal reflections. Environ. Sci. Technol. 2021, 55, 9400–9412. [Google Scholar] [CrossRef]
  13. Goldan, E.; Nedeff, V.; Barsan, N.; Culea, M.; Panainte-Lehadus, M.; Mosnegutu, E.; Tomozei, C.; Chitimus, D.; Irimia, O. Assessment of manure compost used as soil amendment—A review. Processes 2023, 11, 1167. [Google Scholar] [CrossRef]
  14. Urra, J.; Alkorta, I.; Garbisu, C. Potential benefits and risks for soil health derived from the use of organic amendments in agriculture. Agronomy 2019, 9, 542. [Google Scholar] [CrossRef]
  15. Palma, D.; Parlanti, E.; Sourzac, M.; Voldoire, O.; Beauger, A.; Sleiman, M.; Richard, C. Fluorescence analysis allows to predict the oxidative capacity of humic quinones in dissolved organic matter: Implication for pollutant degradation. Environ. Chem. Lett. 2021, 19, 1857–1863. [Google Scholar] [CrossRef]
  16. Jain, S.; Kumar, P.; Vyas, R.K.; Pandit, P.; Dalai, A.K. Adsorption optimization of acyclovir on prepared activated carbon. Can. J. Chem. Eng. 2014, 92, 1627–1635. [Google Scholar] [CrossRef]
  17. Sadat Hosseini Nasr, A.; Akbarzadeh, H.; Tayebee, R. Adsorption mechanism of different acyclovir concentrations on 1–2 nm sized magnetite nanoparticles: A molecular dynamics study. J. Mol. Liq. 2018, 254, 64–69. [Google Scholar] [CrossRef]
  18. Russo, D.; Siciliano, A.; Guida, M.; Galdiero, E.; Amoresano, A.; Andreozzi, R.; Reis, N.M.; Li Puma, G.; Marotta, R. Photodegradation and ecotoxicology of acyclovir in water under UV254 and UV254/H2O2 processes. Water Res. 2017, 122, 591–602. [Google Scholar] [CrossRef] [PubMed]
  19. Palma, D.; Deganello, F.; Liotta, L.F.; La Parola, V.; Bianco Prevot, A.; Malandrino, M.; Laurenti, E.; Boffa, V.; Magnacca, G. Main Issues in the Synthesis and Testing of Thermocatalytic Ce-Doped SrFeO3 Perovskites for Wastewater Pollutant Removal. Inorganics 2023, 11, 85. [Google Scholar] [CrossRef]
  20. Prasse, C.; Wagner, M.; Schulz, R.; Ternes, T.A. Oxidation of the antiviral drug acyclovir and its biodegradation product carboxy acyclovir with ozone: Kinetics and identification of oxidation products. Environ. Sci. Technol. 2012, 46, 2169–2178. [Google Scholar] [CrossRef] [PubMed]
  21. Vallés, I.; Santos Juanes, L.; Amat, A.M.; Palma, D.; Laurenti, E.; Bianco Prevot, A.; Arques, A. Humic acids as complexing agents to drive photo-Fenton at mild pH in saline matrices: Process performance and mechanistic studies. J. Environ. Chem. Eng. 2023, 11, 111391. [Google Scholar] [CrossRef]
  22. Zhang, Y.; Zhu, H.; Szewzyk, U.; Lübbecke, S.; Uwe Geissen, S. Removal of emerging organic contaminants with a pilot-scale biofilter packed with natural manganese oxides. Chem. Eng. J. 2017, 317, 454–460. [Google Scholar] [CrossRef]
  23. Zarrelli, A.; DellaGreca, M.; Parolisi, A.; Iesce, M.R.; Cermola, F.; Temussi, F.; Isidori, M.; Lavorgna, M.; Passananti, M.; Previtera, L. Chemical fate and genotoxic risk associated with hypochlorite treatment of nicotine. Sci. Total Environ. 2012, 426, 132–138. [Google Scholar] [CrossRef]
  24. Romanucci, V.; Siciliano, A.; Guida, M.; Libralato, G.; Saviano, L.; Luongo, G.; Previtera, L.; Di Fabio, G.; Zarrelli, A. Disinfection by-products and ecotoxic risk associated with hypochlorite treatment of irbesartan. Sci. Total Environ. 2020, 712, 135625. [Google Scholar] [CrossRef]
  25. Ladhari, A.; La Mura, G.; Di Marino, C.; Di Fabio, G.; Zarrelli, A. Sartans: What They Are for, How They Degrade, Where They Are Found and How They Transform. Sustain. Chem. Pharm. 2021, 20, 100409. [Google Scholar] [CrossRef]
  26. Luongo, G.; Previtera, L.; Ladhari, A.; Di Fabio, G.; Zarrelli, A. Peracetic acid vs. sodium hypochlorite: Degradation and transformation of drugs in wastewater. Molecules 2020, 25, 2294. [Google Scholar] [CrossRef]
  27. Temussi, F.; Cermola, F.; DellaGreca, M.; Iesce, M.R.; Passananti, M.; Previtera, L.; Zarrelli, A. Determination of photostability and photodegradation products of indomethacin in aqueous media. J. Pharm. Biomed. Anal. 2011, 56, 678–683. [Google Scholar] [CrossRef] [PubMed]
  28. Derco, J.; Dudáš, J.; Valičková, M.; Šimovičová, K.; Kecskés, J. Removal of micropollutants by ozone-based processes. Chem. Eng. Process. 2015, 94, 78–84. [Google Scholar] [CrossRef]
  29. Ragab, D.; Gomaa, H.G.; Sabouni, R.; Salem, M.; Ren, M.; Zhu, J. Micropollutants removal from water using microfiltration membrane modified with ZIF-8 metal organic frameworks (MOFs). Chem. Eng. J. 2016, 300, 273–279. [Google Scholar] [CrossRef]
  30. Gupta, A.; Vyas, R.K.; Gupta, A.B. Occurrence of acyclovir in the aquatic environment, its removal and research perspectives: A review. J. Water Process Eng. 2021, 39, 101855. [Google Scholar] [CrossRef]
  31. Niedobitek, G.; Agathanggelou, A.; Steven, N.; Young, L.S. Epstein-Barr virus (EBV) in infectious mononucleosis: Detection of the virus in tonsillar B lymphocytes but not in desquamated oropharyngeal epithelial cells. Mol. Pathol. 2000, 53, 37. [Google Scholar] [CrossRef]
  32. O’Brien, J.J.; Campoli-Richards, D.M. Acyclovir: An updated review of its antiviral activity, pharmacokinetic properties and therapeutic efficacy. Drugs 1989, 37, 233–309. [Google Scholar] [CrossRef] [PubMed]
  33. Monicha, E.; Andayani, R.; Rivai, H. Review of acyclovir analysis in pharmaceutical preparations and biological matrices. World J. Pharm. Pharm. Sci. 2020, 9, 849–875. [Google Scholar]
  34. Wei, Y.P.; Yao, L.Y.; Wu, Y.Y.; Liu, X.; Peng, L.H.; Tian, Y.L.; Ding, J.-H.; Li, K.-H.; He, Q.G. Critical review of synthesis, toxicology and detection of acyclovir. Molecules 2021, 26, 6566. [Google Scholar] [CrossRef]
  35. Kłysik, K.; Pietraszek, A.; Karewicz, A.; Nowakowska, M. Acyclovir in the treatment of herpes viruses–A review. Curr. Med. Chem. 2020, 27, 4118–4137. [Google Scholar] [CrossRef] [PubMed]
  36. Heidary, F.; Madani, S.; Gharebaghi, R.; Asadi-Amoli, F. Acyclovir as a potential add-on treatment for COVID-19: A narrative review. SSRN Electron. J. 2021, 10, 3767875. [Google Scholar] [CrossRef]
  37. Akimsheva, E.Y.; Dolinina, E.S.; Parfenyuk, E.V. Interactions of sol-gel encapsulated acyclovir with silica matrix. Colloid. Surf. B Biointerfaces 2019, 178, 103–110. [Google Scholar] [CrossRef] [PubMed]
  38. Mascolo, G.; Balest, L.; Cassano, D.; Laera, G.; Lopez, A.; Pollice, A.; Salerno, C. Biodegradability of pharmaceutical industrial wastewater and formation of recalcitrant organic compounds during aerobic biological treatment. Bioresour. Technol. 2010, 101, 2585–2591. [Google Scholar] [CrossRef] [PubMed]
  39. Azuma, T.; Arima, N.; Tsukada, A.; Hirami, S.; Matsuoka, R.; Moriwake, R.; Ishiuchi, H.; Inoyama, T.; Teranishi, Y.; Yamaoka, M.; et al. Science of the total environment detection of pharmaceuticals and phytochemicals together with their metabolites in hospital effluents in Japan, and their contribution to sewage treatment plant influents. Sci. Total Environ. 2016, 548–549, 189–197. [Google Scholar] [CrossRef] [PubMed]
  40. Seitz, W.; Winzenbacher, R. A survey on trace organic chemicals in a German water protection area and the proposal of relevant indicators for anthropogenic influences. Environ. Monit. Assess. 2017, 6, 189–244. [Google Scholar] [CrossRef]
  41. Peng, X.; Wang, C.; Zhang, K.; Wang, Z.; Huang, Q.; Yu, Y.; Ou, W. Profile and behavior of antiviral drugs in aquatic environments of the Pearl River Delta, China. Sci. Total Environ. 2014, 466–467, 755–761. [Google Scholar] [CrossRef]
  42. Bradley, P.M.; Barber, L.B.; Duris, J.W.; Foreman, W.T.; Furlong, E.T.; Hubbard, L.E.; Hutchinson, K.J.; Keefe, S.H.; Kolpin, D.W. Riverbank filtration potential of pharmaceuticals in a wastewater-impacted stream. Environ. Pollut. 2014, 193, 173–180. [Google Scholar] [CrossRef]
  43. Prasse, C.; Schlüsener, M.P.; Schulz, R.; Ternes, T.A. Antiviral drugs in wastewater and surface waters: A new pharmaceutical class of environmental relevance? Environ. Sci. Technol. 2010, 44, 1728–1735. [Google Scholar] [CrossRef]
  44. Medici, A.; Sarakha, M.; Di Fabio, G.; Brigante, M.; Zarrelli, A. Efficient Nimesulide degradation via chlorination and sun-simulated radiation: Kinetic insights, reactive species formation, and application to real wastewater. J. Environ. Chem. Eng. 2024, 12, 113247. [Google Scholar] [CrossRef]
  45. Dagdu, K.V.; Gadhave, M.; Bhujbal, S.; Shrinath, B. Area under curve by UV spectrophotometric method for determination albendazole in bulk. J. Drug Deliv. Ther. 2019, 9, 47–50. [Google Scholar] [CrossRef]
  46. Langenfeld, N.J.; Payne, L.E.; Bugbee, B. Colorimetric determination of urea using diacetyl monoxime with strong acids. PLoS ONE 2021, 16, e0259760. [Google Scholar] [CrossRef] [PubMed]
  47. Hojjatie, M.M.; Abrams, D. Validation for the determination of biuret in water-soluble, urea-based commercial inorganic fertilizer materials, urea solutions, and sulfur-coated urea products by reversed-phase liquid chromatography: Single-laboratory validation of an extension of AOAC Official method SM 2003.14. J. AOAC Int. 2014, 97, 712–720. [Google Scholar] [CrossRef] [PubMed]
Molecules 29 03783 g001
Figure 1. Chemical structures of ACV and its degradation products.
Figure 1. Chemical structures of ACV and its degradation products.
Molecules 29 03783 g001
Molecules 29 03783 sch001
Scheme 1. Isolation of the degradation products DP1–DP11.
Scheme 1. Isolation of the degradation products DP1–DP11.
Molecules 29 03783 sch001
Molecules 29 03783 g002
Figure 2. Proposed reaction mechanism leading to the formation of DP1–DP3 and DP6–DP10. The lowercase letters in the figure indicate possible reaction mechanisms.
Figure 2. Proposed reaction mechanism leading to the formation of DP1–DP3 and DP6–DP10. The lowercase letters in the figure indicate possible reaction mechanisms.
Molecules 29 03783 g002
Molecules 29 03783 g003
Figure 3. Proposed reaction mechanism leading to the formation of DP4, DP7–DP8, DP10–DP11. The lowercase letters in the figure indicate possible reaction mechanisms.
Figure 3. Proposed reaction mechanism leading to the formation of DP4, DP7–DP8, DP10–DP11. The lowercase letters in the figure indicate possible reaction mechanisms.
Molecules 29 03783 g003
Molecules 29 03783 g004
Figure 4. Degradation efficiency of ACV after 30 s of reactions in different ratios of hypochlorite–ACV in MilliQ and wastewater.
Figure 4. Degradation efficiency of ACV after 30 s of reactions in different ratios of hypochlorite–ACV in MilliQ and wastewater.
Molecules 29 03783 g004
Table 1. Recovery percentages of Acyclovir and those of its isolated byproducts.
Table 1. Recovery percentages of Acyclovir and those of its isolated byproducts.
DP1st Chlorination % *2nd Chlorination % *
ACV~34~4
14.20.9
23.81.5
32.51.0
42.40.5
52.31.1
62.10.6
73.13.3
82.83.3
91.62.1
103.54.9
110.50.3
Transformation
Σ%DPs		≥29≥19
* The percentages were calculated based on the quantity of ACV that was not recovered unchanged.
Table 2. Spectral data of ACV and its degradation byproducts DP1–DP11.
Table 2. Spectral data of ACV and its degradation byproducts DP1–DP11.
DPNamePhysical
Aspect		Chemical
Formula		m/z
Calculated [M]+		m/z
Found
[M + H]+
ACV2-Amino-9-((2-hydro xyethoxy)me thyl)-3H-purin-6(9H)-oneGrey powderC8H11N5O3225.20226.08 (88%)
DP12-Amino-3H-
purin-6(9H)-one		Grey powderC5H5N5O151.05152.12 (55%)
DP21H-Purine-
2,6(3H,9H)-dione.		Grey powderC5H4N4O2152.03153.13 (66%)
DP31H-Purine-2,6,8(3H,7H,9H)-trioneGrey powderC5H4N4O3168.03169.12 (38%)
DP46-Amino-1,3,5-triazine-2,4(1H,3H)-dioneWhite powderC3H4N4O2128.03129.09 (41%)
DP51,3,5-Triazinane-
2,4,6-trione		White powderC3H3N3O3129.02130.07 (42%)
DP6Imidazolidine-
2,4,5-trione		White powderC3H2N2O3114.01115.06 (51%)
DP7OxalamideGrey powderC2H4N2O2--
DP82-Amino-2-oxoacetic acidGrey powderC2H3NO3--
DP9Oxalic acidGrey powderC2H2O4--
DP10UreaGrey powderCH4N2O--
DP11CarbamylureaGrey powderC2H5N3O2--
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Medici, A.; De Nisco, M.; Luongo, G.; Di Fabio, G.; Brigante, M.; Zarrelli, A. Degradation Acyclovir Using Sodium Hypochlorite: Focus on Byproducts Analysis, Optimal Conditions and Wastewater Application. Molecules 2024, 29, 3783. https://doi.org/10.3390/molecules29163783

AMA Style

Medici A, De Nisco M, Luongo G, Di Fabio G, Brigante M, Zarrelli A. Degradation Acyclovir Using Sodium Hypochlorite: Focus on Byproducts Analysis, Optimal Conditions and Wastewater Application. Molecules. 2024; 29(16):3783. https://doi.org/10.3390/molecules29163783

Chicago/Turabian Style

Medici, Antonio, Mauro De Nisco, Giovanni Luongo, Giovanni Di Fabio, Marcello Brigante, and Armando Zarrelli. 2024. "Degradation Acyclovir Using Sodium Hypochlorite: Focus on Byproducts Analysis, Optimal Conditions and Wastewater Application" Molecules 29, no. 16: 3783. https://doi.org/10.3390/molecules29163783

Article Metrics

Back to TopTop