Next Article in Journal
The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys
Next Article in Special Issue
Micromechanism of Cold Deformation of Two-Phase Polycrystalline Ti–Al Alloy with Void
Previous Article in Journal
Effects of Pumice-Based Porous Material on Hydration Characteristics and Persistent Shrinkage of Ultra-High Performance Concrete (UHPC)
Previous Article in Special Issue
Effects of the Mg/Si Ratio on Microstructure, Mechanical Properties, and Precipitation Behavior of Al–Mg–Si–1.0 wt %-Zn Alloys
 
 
Article

Article Versions Notes

Materials 2019, 12(1), 10; https://doi.org/10.3390/ma12010010
Action Date Notes Link
article xml file uploaded 20 December 2018 12:35 CET Original file -
article xml uploaded. 20 December 2018 12:35 CET Update https://www.mdpi.com/1996-1944/12/1/10/xml
article pdf uploaded. 20 December 2018 12:35 CET Version of Record https://www.mdpi.com/1996-1944/12/1/10/pdf
article html file updated 20 December 2018 12:37 CET Original file -
article html file updated 16 January 2019 03:40 CET Update -
article html file updated 2 April 2019 16:26 CEST Update -
article html file updated 13 April 2019 12:31 CEST Update -
article html file updated 27 April 2019 16:40 CEST Update -
article html file updated 12 October 2019 06:22 CEST Update -
article html file updated 11 February 2020 04:23 CET Update -
article html file updated 17 July 2022 17:28 CEST Update https://www.mdpi.com/1996-1944/12/1/10/html
Back to TopTop