Next Article in Journal
Modification of Residual Stresses in Laser Additive Manufactured AlSi10Mg Specimens Using an Ultrasonic Peening Technique
Next Article in Special Issue
A New Cutting Tool Design for Cryogenic Machining of Ti–6Al–4V Titanium Alloy
Previous Article in Journal
Effect of Temperature and Water Absorption on Low-Velocity Impact Damage of Composites with Multi-Layer Structured Flax Fiber
Previous Article in Special Issue
Hybrid Composite-Metal Stack Drilling with Different Minimum Quantity Lubrication Levels
 
 
Article

Article Versions Notes

Materials 2019, 12(3), 454; https://doi.org/10.3390/ma12030454
Action Date Notes Link
article xml file uploaded 1 February 2019 11:47 CET Original file -
article xml uploaded. 1 February 2019 11:47 CET Update https://www.mdpi.com/1996-1944/12/3/454/xml
article pdf uploaded. 1 February 2019 11:47 CET Version of Record https://www.mdpi.com/1996-1944/12/3/454/pdf
article html file updated 1 February 2019 11:50 CET Original file -
article html file updated 20 February 2019 04:39 CET Update -
article html file updated 28 February 2019 10:52 CET Update -
article html file updated 3 April 2019 13:41 CEST Update -
article html file updated 12 April 2019 18:09 CEST Update -
article html file updated 26 April 2019 22:20 CEST Update -
article html file updated 14 October 2019 07:59 CEST Update -
article html file updated 11 February 2020 13:08 CET Update -
article html file updated 18 July 2022 03:49 CEST Update https://www.mdpi.com/1996-1944/12/3/454/html
Back to TopTop