Next Article in Journal
Developing Super-Hydrophobic and Abrasion-Resistant Wool Fabrics Using Low-Pressure Hexafluoroethane Plasma Treatment
Next Article in Special Issue
Effect of Lubricant Type on the Friction Behaviours and Surface Topography in Metal Forming of Ti-6Al-4V Titanium Alloy Sheets
Previous Article in Journal
Synthesis of Zr-89-Labeled Folic Acid-Conjugated Silica (SiO2) Microwire as a Tumor Diagnostics Carrier for Positron Emission Tomography
Previous Article in Special Issue
A Pocket-Textured Surface for Improving the Tribological Properties of Point Contact under Starved Lubrication
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Materials
Volume 14
Issue 12
10.3390/ma14123227
materials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Selected Methods and Applications of Anti-Friction and Anti-Wear Surface Texturing

by
Slawomir Wos
,
Waldemar Koszela
and
Pawel Pawlus
*
Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Powstańców Warszawy 8, 35-959 Rzeszów, Poland
*
Author to whom correspondence should be addressed.
Materials 2021, 14(12), 3227; https://doi.org/10.3390/ma14123227
Submission received: 20 May 2021 / Revised: 5 June 2021 / Accepted: 8 June 2021 / Published: 11 June 2021
(This article belongs to the Special Issue Friction and Wear of Materials Surfaces)
Browse Figures
Versions Notes

Abstract

The constant development of environmental protection causes the necessity to increase the efficiency of machines. By increasing the efficiency of machines, energy losses can be limited, leading to lower energy consumption. Friction reduction leads to an increase in efficiency and a decrease in wear. In this paper, selected surface texturing methods, such as burnishing and abrasive jet machining, with their limitations are presented. Thanks to those processes, various surface textures can be obtained. Examples of applications of these methods for friction and wear reduction are shown.
Keywords: friction reduction; surface texturing; plastic deformation; abrasive jet machining friction reduction; surface texturing; plastic deformation; abrasive jet machining

Share and Cite

MDPI and ACS Style

Wos, S.; Koszela, W.; Pawlus, P. Selected Methods and Applications of Anti-Friction and Anti-Wear Surface Texturing. Materials 2021, 14, 3227. https://doi.org/10.3390/ma14123227

AMA Style

Wos S, Koszela W, Pawlus P. Selected Methods and Applications of Anti-Friction and Anti-Wear Surface Texturing. Materials. 2021; 14(12):3227. https://doi.org/10.3390/ma14123227

Chicago/Turabian Style

Wos, Slawomir, Waldemar Koszela, and Pawel Pawlus. 2021. "Selected Methods and Applications of Anti-Friction and Anti-Wear Surface Texturing" Materials 14, no. 12: 3227. https://doi.org/10.3390/ma14123227

APA Style

Wos, S., Koszela, W., & Pawlus, P. (2021). Selected Methods and Applications of Anti-Friction and Anti-Wear Surface Texturing. Materials, 14(12), 3227. https://doi.org/10.3390/ma14123227

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop