Next Article in Journal
Solid Truss to Shell Numerical Homogenization of Prefabricated Composite Slabs
Next Article in Special Issue
Application of Activated Carbon Banana Peel Coated with Al2O3-Chitosan for the Adsorptive Removal of Lead and Cadmium from Wastewater
Previous Article in Journal
The Effect of Fatigue Test on the Mechanical Properties of the Cellular Polyurethane Mats Used in Tram and Railway Tracks
 
 
Article
Peer-Review Record

Rice Husk Research: From Environmental Pollutant to a Promising Source of Organo-Mineral Raw Materials

Materials 2021, 14(15), 4119; https://doi.org/10.3390/ma14154119
by Baimakhan Satbaev 1,†, Svetlana Yefremova 2,*,†, Abdurassul Zharmenov 2,†, Askhat Kablanbekov 2, Sergey Yermishin 2, Nurgali Shalabaev 1, Arsen Satbaev 1 and Vitaliy Khen 3
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Materials 2021, 14(15), 4119; https://doi.org/10.3390/ma14154119
Submission received: 25 June 2021 / Revised: 16 July 2021 / Accepted: 20 July 2021 / Published: 23 July 2021
(This article belongs to the Special Issue Hybrid Materials for Environmental Application)

Round 1

Reviewer 1 Report

See attachment

Comments for author File: Comments.pdf

Author Response

Dear Reviewer,

Authors would like to thank you for useful recommendations and your time spent reviewing the manuscript. Your comments are very valuable for us. In general, we agree with your point of view. As a result, we paid attention to each of your suggestions. In our opinion, revision undertaken according to your comments really helped to improve the manuscript. Please see our response attached.

Thank you again.

Best regards,

Prof. Svetlana Yefremova

Author Response File: Author Response.docx

Reviewer 2 Report

In this paper, the authors investigate the processing method of rice husk. They find that thermal destruction of the bulk of the rice husk occurs up to 500°C, and it happens in three stages: at 200°C, Hemicelluloses will decompose; at 265 °C, the cellulose will be destructed, which counts the maximum decomposition; at 350-360 °C, the lignin will be destructed.  In general, the structure of the paper is clear and the results are well delivered. However, there are a few concerns that need to be addressed:

  1. The scale bar in the SEM images in figure 2 is merely recognizable. Can the authors fix this?
  2. I am not sure anything can be observed from figures 2b and 2d. I would suggest the authors repeat the imaging and take a better image.

Author Response

Dear Reviewer,

Authors would like to thank you for your reviewing and comments. We tried to clarify the issues. Figure 2 was improved. Explanation on the second question is provided in the attached response.

As for English language, spelling was checked and corrected, where we thought it was required.

Thank you again.

Best regards,

Prof. Svetlana Yefremova

Author Response File: Author Response.docx

Back to TopTop