Application of Statistical Methods to Accurately Assess the Effect of Gamma Aluminum Oxide Nanopowder on the Hardness of Composite Materials with Polyester–Glass Recyclate
Abstract
:1. Introduction
2. Materials and Methods
3. Results
3.1. Hardness Measurements of Tested Samples
3.2. Statistical Analysis
3.2.1. Dependent Variable Test
3.2.2. Independent Variable Test
3.2.3. Determination of the Anisotropy of Samples on the Basis of the Classical Coefficient of Variation
4. Discussion
5. Conclusions
Author Contributions
Funding
Data Availability Statement
Conflicts of Interest
References
- Kyzioł, L.; Jastrzębska, M. Określenie wybranych właściwości mechanicznych odpadowych materiałów kompozytowych. Logistyka 2015, 3, 2758–2763. [Google Scholar]
- Królikowski, W. Polimerowe Kompozyty Konstrukcyjne; Wydawnictwo Naukowe PWN: Warszawa, Poland, 2012; pp. 6–17. [Google Scholar]
- Panasiuk, K. Analiza Właściwości Mechanicznych Kompozytów Warstwowych z Recyklatem Poliestrowo-Szklanym. Rozprawa Doktorska, UMG Gdynia, Gdynia, Poland, 2019; pp. 36–89. [Google Scholar]
- Kyzioł, L.; Panasiuk, K.; Hajdukiewicz, G.; Dudzik, K. Acoustic Emission and K-S Metric Entropy as Methods for Determining Mechanical Properties of Composite Materials. Sensors 2021, 21, 145. [Google Scholar] [CrossRef] [PubMed]
- Mrówka, M.; Woźniak, A.; Prężyna, S.; Sławski, S. The Influence of Zinc Waste Filler on the Tribological and Mechanical Properties of Silicone-Based Composites. Polymers 2021, 13, 585. [Google Scholar] [CrossRef] [PubMed]
- Sławski, S.; Szymiczek, M.; Kaczmarczyk, J.; Domin, J.; Świtoński, E. Low Velocity Impact Response and Tensile Strength of Epoxy Composites with Different Reinforcing Materials. Materials 2020, 13, 3059. [Google Scholar] [CrossRef] [PubMed]
- Kyzioł, L.; Panasiuk, K.; Barcikowski, M.; Hajdukiewicz, G. The influence of manufacturing technology on the properties of layered composites with polyester–glass recyclate additive. Prog. Rubber Plast. Recycl. Technol. 2020, 36, 18–30. [Google Scholar] [CrossRef]
- Królikowski, W.; Rosłaniec, Z. Polymer nanocomposites. Kompozyty 2004, 4, 3–16. [Google Scholar]
- Kilikevičius, S.; Kvietkaitė, S.; Mishnaevsky, L., Jr.; Omastová, M.; Aniskevich, A.; Zeleniakienė, D. Novel Hybrid Polymer Composites with Graphene and MXene Nano-Reinforcements: Computational Analysis. Polymers 2021, 13, 1013. [Google Scholar] [CrossRef]
- Tarani, E.; Chrysafi, I.; Kállay-Menyhárd, A.; Pavlidou, E.; Kehagias, T.; Bikiaris, D.N.; Vourlias, G.; Chrissafis, K. Influence of Graphene Platelet Aspect Ratio on the Mechanical Properties of HDPE Nanocomposites: Microscopic Observation and Micromechanical Modeling. Polymers 2020, 12, 1719. [Google Scholar] [CrossRef]
- Huyen, D.N.; Tung, N.T.; Thien, N.D.; Thanh, L.H. Effect of TiO2 on the Gas Sensing Features of TiO2/PANi Nanocomposites. Sensors 2011, 11, 1924–1931. [Google Scholar] [CrossRef]
- Her, S.-C.; Lai, C.-Y. Dynamic Behavior of Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes (MWCNTs). Materials 2013, 6, 2274–2284. [Google Scholar] [CrossRef]
- Chieng, B.W.; Ibrahim, N.A.; Yunus, W.M.Z.W.; Hussein, M.Z. Poly(lactic acid)/Poly(ethylene glycol) Polymer Nanocomposites: Effects of Graphene Nanoplatelets. Polymers 2014, 6, 93–104. [Google Scholar] [CrossRef]
- Motahari, F.; Mozdianfard, M.R.; Salavati-Niasari, M. Synthesis and adsorption studies of NiO nanoparticles in the presence of H2acacen ligand, for removing Rhodamine B in wastewater treatment. Process Saf. Environ. Prot. 2015, 93, 282–292. [Google Scholar] [CrossRef]
- Davar, F.; Salavati-Niasari, M.; Fereshteh, Z. Synthesis and characterization of SnO2 nanoparticles by thermal decomposition of new inorganic precursor. J. Alloys Compd. 2010, 496, 638–643. [Google Scholar] [CrossRef]
- Panahi-Kalamuei, M.; Alizadeh, S.; Mousavi-Kamazani, M.; Salavati-Niasari, M. Synthesis and characterization of CeO2 nanoparticles via hydrothermal route. J. Ind. Eng. Chem. 2015, 21, 1301–1305. [Google Scholar] [CrossRef]
- Monsef, R.; Salwati-Niasari, M. Electrochemical sensor based on a chitosan-molybdenum vanadate nanocomposite for detection of hydroxychloroquine in biological samples. J. Colloid Interface Sci. 2022, 613, 1–14. [Google Scholar] [CrossRef]
- Amiri, M.; Salavati-Niasari, M.; Pardakhty, A.; Ahmadi, M.; Akbaria, A. Caffeine: A novel green precursor for synthesis of magnetic CoFe2O4 nanoparticles and pH-sensitive magnetic alginate beads for drug delivery. Mater. Sci. Eng. C 2017, 76, 1085–1093. [Google Scholar] [CrossRef]
- Zawada, A.; Boczkowska, A.; Ziemkowska, W.; Kunicki, A.; Pietrzykowski, A.; Olszyna, A. Preparatyka nanocząstek Al2O3 do otrzymywania nanokompozytów poliuretanowych. Composites 2006, 6, 79–83. [Google Scholar]
- Chen, C.-H.; Jian, J.-Y.; Yen, F.-S. Preparation and characterization of epoxy/γ-aluminum oxide nanocomposites. Compos. Part A Appl. Sci. Manuf. 2009, 40, 463–468. [Google Scholar] [CrossRef]
- Levashov, E.; Kurbatkina, V.; Alexandr, Z. Improved Mechanical and Tribological Properties of Metal-Matrix Composites Dispersion-Strengthened by Nanoparticles. Materials 2010, 3, 97–109. [Google Scholar] [CrossRef]
- Świtalska, M.; Mazur, M.; Kościelniak, P. Wielowymiarowe Testy Normalności; Wydwnictwo Uniwersytet Jagiellońskiego: Kraków, Poland, 2020; pp. 27–38. [Google Scholar]
- Ndukwe, C.O.; Ezurike, B.O.; Okpala, P.C. Comparative studies of experimental and numerical evaluation of tensile properties of Glass Fibre Reinforced Polyester (GFRP) matrix. Heliyon 2021, 7, 5. [Google Scholar] [CrossRef]
- Yates, F. The Influence of Statistical Methods for Research Workers on the Development of the Science of Statistics. J. Am. Stat. Assoc. 2012, 46, 253. [Google Scholar] [CrossRef]
- Watała, C. Jak skutecznie wykorzystywać metody statystyczne w planowaniu i przeprowadzaniu eksperymentu naukowego. In Statystyka I Data Mining W Badaniach Naukowych; StatSoft: Warszawa, Poland, 2005; pp. 63–79. [Google Scholar]
- Chiang, C.L. Statistical Methods in Analysis; Word Scientific: Singapore, 2002; pp. 47–86. [Google Scholar]
- Panasiuk, K.; Kyzioł, L.; Abramczyk, N.; Hajdukiewicz, G. The impact of polyester-glass recyclate on the hardness and structure of composites. Sci. J. Marit. Univ. Szczec. Zesz. Nauk. Akad. Morska W Szczec. 2019, 59, 22–26. [Google Scholar]
- Rumsey, D.J. E-Book: Statistics for Dummies, 2nd ed.; Wiley: New York, NY, USA, 2016; pp. 56–57. [Google Scholar]
- Barr, C.D.; Çetinkaya-Rundel, M.; Diez, D.M. OpenIntro Statistics, CreateSpace, 2nd ed.; OpenIntro, Inc.: Lexington, KY, USA, 2012. [Google Scholar]
- Hanusz, Z.; Tarasińska, J. Remarks on approximated tests based on Shapiro-Wilk’s statistic. Colloq. Biom. 2008, 38, 87–93. [Google Scholar]
- Royston, P. Approximating the Shapiro-Wilk W test for non-normality. Stat. Comput. 1992, 2, 117–119. [Google Scholar] [CrossRef]
- Sobczyk, M. Statystyka; Wydawnictwo Naukowe PWN: Warszawa, Poland, 2007; pp. 50–51. [Google Scholar]
- Shi, S.-C.; Chen, T.-H.; Mandal, P.K. Enhancing the Mechanical and Tribological Properties of Cellulose Nanocomposites with Aluminum Nanoadditives. Polymers 2020, 12, 1246. [Google Scholar] [CrossRef]
- Łopacka, J. Nanocząstki wykorzystywane w celu poprawy właściwości fizycznych kompozytów polimerowych stosowanych jako materiały opakowaniowe do żywności. Polimery 2013, 58, 864–868. [Google Scholar]
- Kolasińska, E.; Szmaja, A.; Napolski, G.; Świeboda, T.; Tazbir, L. Modyfikacja właściwości elektrycznych polimerów i tworzyw sztucznych. Masz. Elektr. Zesz. Probl. 2018, 3, 29–35. [Google Scholar]
Sample | Resin % | Matrix % | Recyclate % | Nanoadditive % |
---|---|---|---|---|
B0 | 60 | 40 | 0 | 0 |
R10 | 60 | 30 | 10 | 0 |
A2 | 60 | 38 | 0 | 2 |
R10A2 | 60 | 28 | 10 | 2 |
Sample | B0 | A2 | R10 | R10A2 |
---|---|---|---|---|
Hardness, HBa | 43 | 42 | 25 | 30 |
Type of Sample | p |
---|---|
B0 | 0.65 |
A2 | 0.53 |
R10 | 0.07 |
R10A2 | 0.42 |
Lp | Type of Sample | p |
---|---|---|
1 | B0 and A2 | 0.525898 |
2 | B0 and R10 | 0 |
3 | B0 and R10A2 | 0 |
Type of Sample | Probabilities p for Post Hoc (2-Sided) Tests | |||
---|---|---|---|---|
B0 | B0 | B0 | R10 | |
B0 | 0.9404 | 0.00000 | 0.00000 | |
A2 | 0.9404 | 0.00000 | 0.00000 | |
R10 | 0.00000 | 0.00000 | 0.00277 | |
R10A2 | 0.00000 | 0.00000 | 0.00277 |
Type of Material | Vs |
---|---|
B0 | 9.6177 |
A2 | 14.7515 |
R10 | 18.0130 |
R10A2 | 14.9203 |
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Abramczyk, N.; Drewing, S.; Panasiuk, K.; Żuk, D. Application of Statistical Methods to Accurately Assess the Effect of Gamma Aluminum Oxide Nanopowder on the Hardness of Composite Materials with Polyester–Glass Recyclate. Materials 2022, 15, 5957. https://doi.org/10.3390/ma15175957
Abramczyk N, Drewing S, Panasiuk K, Żuk D. Application of Statistical Methods to Accurately Assess the Effect of Gamma Aluminum Oxide Nanopowder on the Hardness of Composite Materials with Polyester–Glass Recyclate. Materials. 2022; 15(17):5957. https://doi.org/10.3390/ma15175957
Chicago/Turabian StyleAbramczyk, Norbert, Sebastian Drewing, Katarzyna Panasiuk, and Daria Żuk. 2022. "Application of Statistical Methods to Accurately Assess the Effect of Gamma Aluminum Oxide Nanopowder on the Hardness of Composite Materials with Polyester–Glass Recyclate" Materials 15, no. 17: 5957. https://doi.org/10.3390/ma15175957