Abstract
This paper presents the synthesis and characterization of graphene–polymer composites, focusing on their mechanical and antibacterial properties. Graphene flakes were obtained via an electrochemical method and integrated into polyamide 6 (PA6) matrices using melt intercalation. Various characterization techniques confirmed the quality of the graphene flakes, including X-ray diffraction (XRD), Raman spectroscopy, and infrared (IR) spectroscopy, as well as scanning and transmission electron microscopy (SEM and TEM) imaging. Mechanical tests showed an increase in the elastic modulus with graphene incorporation, while the impact strength decreased. The SEM analysis highlighted the dispersion of the graphene flakes within the composites and their impact on fracture behavior. Antimicrobial tests demonstrated significant antibacterial properties of the composites, attributed to both oxidative stress and mechanical damage induced by the graphene flakes. The results suggest promising applications for graphene–polymer composites in advanced antimicrobial materials.
Share and Cite
MDPI and ACS Style
Głuchowski, P.; Macieja, M.; Tomala, R.; Stefanski, M.; Stręk, W.; Ptak, M.; Szymański, D.; Szustakiewicz, K.; Junka, A.; Dudek, B.
Mechanical and Antimicrobial Properties of the Graphene-Polyamide 6 Composite. Materials 2024, 17, 3465.
https://doi.org/10.3390/ma17143465
AMA Style
Głuchowski P, Macieja M, Tomala R, Stefanski M, Stręk W, Ptak M, Szymański D, Szustakiewicz K, Junka A, Dudek B.
Mechanical and Antimicrobial Properties of the Graphene-Polyamide 6 Composite. Materials. 2024; 17(14):3465.
https://doi.org/10.3390/ma17143465
Chicago/Turabian Style
Głuchowski, Paweł, Marta Macieja, Robert Tomala, Mariusz Stefanski, Wiesław Stręk, Maciej Ptak, Damian Szymański, Konrad Szustakiewicz, Adam Junka, and Bartłomiej Dudek.
2024. "Mechanical and Antimicrobial Properties of the Graphene-Polyamide 6 Composite" Materials 17, no. 14: 3465.
https://doi.org/10.3390/ma17143465
Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details
here.
Article Metrics
Article metric data becomes available approximately 24 hours after publication online.