A Simplified Calibration Procedure for DEM Simulations of Granular Material Flow

The discrete element method (DEM) has emerged as an essential computational tool in geotechnical engineering for the simulation of granular materials, offering significant advantages over traditional continuum-based methods such as the finite element method (FEM) and the finite difference method (FDM). The DEM’s ability to model particle-level interactions, including contact forces, rotations, and particle breakage, allows for a more precise understanding of granular media behavior under various loading conditions. However, accurate DEM simulations require meticulous calibration of input parameters, such as particle density, stiffness, and friction, to effectively replicate real-world behavior. This study proposes a simplified calibration procedure, intended to be conducted prior to any granular material flow DEM modeling, based on three fundamental physical tests: bulk density, surface friction, and angle of repose. The ability of these tests, conducted on dry quartz sand, to accurately determine DEM micromechanical parameters, was validated through numerical simulation of cylinder tests with varying height-to-radius ratios. The results demonstrated that this calibration approach effectively reduced computational complexity while maintaining high accuracy, with validation errors of 0% to 12%. This research underscores the efficacy of simplified DEM calibration methods in enhancing the predictive reliability of simulations, particularly for sand modeling in geotechnical applications.