1. Introduction
The idea of a sustainable city as a good place to live, taking into account the social, cultural, economic and environmental dimensions, has been under development since the 1980s [
1,
2]. In the new generation of smart cities 3.0, instead of economic growth rates, it is general feelings of happiness, contentment and acceptance that are considered most important. This means that cities should develop based on the potential of citizens [
3] who love the cities they live in [
4]. The attractiveness of a place of residence is influenced by many factors, such as harmoniously shaped spatial arrangements and the availability of safe public spaces [
5], proper relations between the typology of buildings and the morphology of the urban space [
6], access to green areas, the availability of necessary service infrastructure and a system of bicycle and pedestrian paths [
7], biodiversity and climate resilience and ecosystem services, including access to clean water (filtration) and clean air (urban greenery) [
8]. The pandemic has revealed the resilience of the urban system [
9] to risks arising from poor hygiene and sanitary conditions, inappropriate distribution of services [
10] and growing social inequalities [
11]. The COVID-19 pandemic has triggered a process of changes in behaviour and social habits, especially those related to the use of urban spaces and transport [
12,
13]. Links are shown between the development of the pandemic and the mental and physical health of the residents, as well as the associated vitality of the city [
14,
15], which is heavily influenced by available green spaces [
16,
17,
18,
19,
20,
21]. The importance of the immediate neighbourhood is also increasing [
22,
23], both in the social dimension, providing the opportunity to obtain assistance and a sense of security, as well as in the functional-spatial dimension, allowing the reduction of pollution and noise, through having smaller distances and mixed use design [
24,
25].
The research concerns the preferences of potential residents in choosing a place to live within large cities, as regards good living conditions and sustainable development. Large cities are often important academic centres, so the focus was on a group of students—young people facing the choice of where to live in the near future. Students are both residents and visitors of these cities, living there temporarily. Many of them choose to stay in the city after graduation, as it offers attractive employment opportunities, cultural attractions and recreational opportunities. During their studies, students are accommodated in student hostels, they rent rooms or flats in the city, they live with family or, less frequently, they have their own accommodation. Residential preferences are a complex and sometimes inconsistent set of different factors [
26,
27]. Sustainable urban planning increasingly uses information about the residents’ perceptions of factors affecting the quality of life in certain locations [
4]. Residential preferences play an important role in the sustainable development of cities. This issue has been the subject of many studies in recent years. Various methodological approaches have been used, including statistically evaluated surveys, e.g., [
28,
29,
30,
31] as well as geo-questionnaires and geo-crowdsourced data, e.g., [
32,
33,
34,
35]. Location preferences can be expressed both by specifying location selection criteria and their importance, as well as directly by identifying the best locations. Multi-criteria decision analysis in geographic information systems (GIS-MCDA) is a collection of methods providing opportunities to carry out a combined analysis of these two types of information. It also makes it possible to set common preferences representing a group of people.
GIS-MCDA allows both spatial (geographical) data and data about the participants’ (the decision-makers’) preferences to be processed and analysed in order to obtain information supporting spatial planning and decision-making processes [
36]. In the group of multi-criteria methods based on value/utility function [
37], the process of multi-criteria analysis in geographical information systems generally includes the following steps [
38]: formulating the decision problem, defining the criteria, mapping the criteria values, evaluating and standardising criteria values, determining the significance weightings for the criteria, applying the aggregation function (combination rule), and carrying out a sensitivity analysis. The analysis results in a ranking of decision alternatives. Based on this, proposals are formulated for taking specific actions in the geographical space. In the traditional MCDA approach, the decision-maker’s preferences for decision alternatives, e.g., the most preferred locations, are not indicated ad hoc, but are the result of an analysis in which the assessment of the relative importance of criteria, expressed in terms of criteria weights (stated preferences), plays a key role. In a geo-questionnaire concerning housing preferences, these preferences are expressed both explicitly (stated preferences) through the questions themselves, and by directly indicating preferred locations—from which conclusions on revealed preferences can then be drawn [
39]. In addition, in the currently developing spatial decision support systems (SDSS) incorporating crowdsourced data, the preferences can be determined both as stated preferences (determining the relevance of criteria) and as revealed preferences derived from indicated locations or geographical features [
40].
The decision-maker’s preference for the criteria is expressed through the weights of relative significance of the criteria. In most methods, the weights:
meet two assumptions: they take values between 0 and 1 and add up to 1 [
36,
37,
38]. Depending on the applied MCDA method and aggregate function, the criteria weights have different interpretations and implications [
41,
42].
Objective vs. subjective weights. Objective and/or subjective reasons are taken into account to determine the weights. This may lead to different results [
43]. The objective reasons are related to the differentiation of criteria values across individual decision alternatives. This is encapsulated in the range-sensitive principle [
36,
37,
44]. The lower the variation, the lower the significance of the criterion. The differentiation of a criterion value may be expressed in a number of ways, such as the range of values of the criterion [
45,
46,
47], entropy [
48,
49] or standard deviation (SD) [
50]. The subjective reasons for determining weights refer to the decision-maker’s subjective perceptions and judgements about the relative importance of the criteria. In GIS-MCDA, the most commonly used subjective methods for determining weights are ranking and pairwise comparison matrix (PCM) [
51].
Global vs. local weightings. Locally determined corrections based on objective reasons can be used to override global weights determined subjectively by a decision-maker [
36]. These corrections may be based on the local ranges of values [
52,
53] or the locally determined value of entropy [
36]. This is how spatially explicit weights (local weights) are acquired. Another approach is to vary the values of the weights based on the distance relationship to the selected geographic features [
54]. Spatially explicit MCDA advancement is a major trend in GIS-MCDA development [
40].
Statistical revealed weights. The values of weights can be determined in the decision-making process from decisions made currently or in the past. Statistical methods are then used. Korhonen et al. [
55] demonstrated in a simple two-criterion experiment that, based on the pairwise comparisons of decision alternatives, the weights that best explain those pairwise comparisons can be determined using statistical methods to a greater extent than the subjective weights given by the decision-makers. In this way, on the basis of the decisions made, it is possible to attempt to know the preferences of the decision-maker regarding the criteria. Veronesi et al. [
56] employed a statistical analysis to quantitatively calculate weights and tested their method on a case study about siting a transmission line in Switzerland. They compared the criteria values at the locations of the current transmission siting with the values at the locations of randomly generated points. The greater the difference in value, the higher the weight that the criterion received as a result.
Group criteria weights. Group decision-making occurs when many decision-makers are involved in the decision process [
57]. Several levels of Group GIS-MCDA can be distinguished, depending on whether stakeholders, invited participants or the entire community are involved in the decision-making process (social multi-criteria evaluation) [
58]. The structure of the decision problem may vary depending on whether or not an external consensus has been reached on the main elements of the decision-making process, including the value of the criteria weights [
59]. With the development of new technologies such as Public Participation GIS (PPGIS) and geo-questionnaires techniques, opportunities have arisen to involve an increasing number of decision-makers in the decision-making process [
34,
40]. Methods of incorporating crowdsourced data into GIS-MCDA have begun to develop intensively. Jelokhani-Niaraki [
60] recently conducted a comprehensive and systematic review of peer-reviewed studies and determined the direction of research involving state-of-the-art collaborative GIS-MCDA tasks and tools. The meta-analysis of previous collaborative GIS-MCDA conducted indicated that 46% of the items were related to the issue of determining the weights of the significance of the criteria. The correct weighting of criteria by non-expert decision-makers can be problematic [
61,
62]. To solve this problem, complex decision support systems can be used that involve additional information for specifying weights, enabling information exchange and leading to collaboration between decision-makers [
63,
64]. Another approach might be to simplify the process of determining weights as much as possible—which is proposed in this article.
Stated vs. revealed criteria weights based on crowdsourced preference data. The crowdsourced data can be used both to extract geographic data, to create criteria maps based on them and to determine the preferences of decision-makers (CPD—crowdsourced preference data), where CPD preferences can take the form of stated preferences (SP) or revealed preferences (RP). Stated preferences (SP) take the form of criteria weights or are expressed through rankings [
40]. Once each participant has determined their preferences independently by determining the criteria weights or ranking of criteria, further analysis can continue in parallel, so that, after individual results have been obtained, they are aggregated into a group result that is representative of the majority of the decision-makers [
59,
65]. Alternatively, based on individually determined pairwise comparison matrices (PCMs) or criteria rankings, common criteria weights can be calculated that are representative of the collective decision-maker [
64]. For revealed preferences (RP), decision-makers indicate locations and criteria preferences that are implicit in the decision-making process. They are then guided in their decision making by the holistic synthesis of information [
66]. Mahmoody Vanolya et al. [
67] conducted the validation of GIS-MCDA results using PPGIS based on a performed case study on locating suitable areas for a new restaurant. They compared the results obtained by experts, who expressed their stated preferences as criteria weights, against the revealed preferences of citizens, given by indicating locations on a map using PPGIS. The validation results indicated a low level of consistency between the experts’ solutions and the citizens’ opinions. This issue was also raised in the context of studies on choices about the form of transport [
68]. Hasanzadeh et al. [
27] evaluated the consistency of the preferred housing environment of participants (stated preferences) with their actual living environment (revealed preferences). The results they obtained showed a considerable lack of consistency. It is interesting in the context of the spatial analyses to see whether the results obtained from stated preferences and revealed preferences are consistent if they are set by the same group of participants and, in both cases, refer to a preferred state.
This paper uses an approach in which group preferences—representing the whole group—are determined based on the housing preferences of individual participants of a geo-questionnaire. The method suggested for this purpose allows group preferences to be determined on the basis of a simplified vote on the ranking of criteria. In this method, respondents indicate only the order of the
first criteria. This method is defined as FCPR (First Criteria Partial Ranking). In this way, group-stated preferences were determined. In addition, the participants indicated their most preferred locations (revealed preferences). The decision-makers’ preferences regarding the relevance of criteria and, consequently, their objectives in making the choice [
37] may change over time. In determining group preferences, such a change will illustrate the direction of change of the group as a whole. The paper asks the following questions: (1) will the proposed simplified first criteria partial ranking method (FCPR) of voting for
first criteria ranking produce common weights consistent with the common weights obtained by the traditionally used methods: ranking and the pairwise comparison method (PCM)? (2) Will the stated preferences indicated by respondents be consistent with the revealed preferences expressed by indications of location? (3) Will rapid changes in the global situation, such as the outbreak of the COVID-19 pandemic, affect group housing preferences?
In order to answer these questions, a simple geo-questionnaire was carried out analysing preferences regarding the location of residence of students at the Faculty of Geodesy and Cartography of the Warsaw University of Technology. Using a simple Google form, students defined their stated preferences (SP) by indicating the criteria they considered most important. They also indicated their preferred locations (revealed preferences, RP). The geographical coordinates B and L were entered into the Google form (coordinates system WGS84, EPSG: 4326) of indicated preferred locations in the map service of the City of Warsaw (mapa.um.warszawa.pl; accessed on 21 April 2021). The results of research carried out in 2019, when no one anticipated a pandemic, were used. They were a continuation of research aimed at examining the spatial housing preferences of students. After the outbreak of the pandemic, research using the same simple geo-questionnaire and procedures was carried out again. This allowed us to track changes in the obtained results. Housing preferences, understood as preferred locations, show the students’ view of the city and the attractiveness of particular neighbourhoods. At the same time, they indicate what, from the students’ point of view, most influences the comfort of living in the city. In the study, they were asked to forget for a moment about their own budgets, to identify their dream locations and choose the criteria that guided them in their selection. The study was conducted in two phases: in 2019—before the outbreak of the pandemic, and in autumn 2020—during the second wave of the COVID-19 epidemic in Poland. We used the methodology of spatial multi-criteria analyses (GIS-MCDA) and the developed FCPR method to analyse the indicated preferences. In addition, a smaller group of participants (the control group) underwent additional tests in order to obtain the values of the criteria weights using methods based on the full ranking and the pairwise comparison method (PCM). This allowed us to evaluate the results obtained using the FCPR method and to select the best technique for approximating the values of the weights.
4. Results
In the first phase, the study was conducted in the control group. The results allowed a suitable approximation weights technique to be determined for the developed FCPR method. The weighs were then determined from the geo-questionnaires and the results were analysed.
The control group consisted of 50 students who determined the full ranking of criteria set in List No 1, and also made pairwise comparisons of relative criteria significance in a matrix . On the basis of the individual full rankings, partial rankings were determined in which the indications from the first three positions were taken into account (). Criteria weights were then determined using the RS, RR and AC approximation techniques on the full ranking, and using the FCPR method () and the PCM (pairwise comparison matrix) method based on an averaged matrix of pairwise comparisons . Seven sets of group weights of criteria were obtained.
The task of the control group was: firstly, to rank the criteria from List No 1; and secondly, to complete a matrix of pairwise comparisons. The task was made available to them on the learning platform, in the form of a prepared spreadsheet. The collected results from each student were checked for: (a) consistency of the assessments made in the pairwise comparisons matrix (CR < 0.1); (b) compatibility of the declared ranking with the ranking of the criteria determined by the PCM method.
4.1. Results Obtained in the Control Group
In the set of 50 filled pairwise comparison matrices , nine contained inconsistent assessments of the criteria significance (CR > 0.1), moreover, in seven cases, the resulting rankings of the criteria were different from the declared rankings. In addition, in eight pairwise comparison matrices, the criteria ranking determined from them were different from the declared one, even though they contained consistent pairwise comparisons. A total of 17 responses were problematic and so they were removed from the set of results. They represented 34% of all results. This shows that correctly assessing the significance of criteria using a pairwise comparison matrix (PCM) can be problematic. The remaining 33 responses were used to determine group weights using three methods:
The method of voting for the ranking (the RS, RR and AC techniques);
Using FCPR method k = 3 (the RS, RR and AC techniques);
The averaged pairwise comparisons matrix method .
The counts of particular positions in the ranking for criteria were determined on the basis of 33 rankings adopted for the analysis and are presented in
Table 1.
Using Equations (14)–(17), the scores for the individual ranking positions were calculated
and
using approximation techniques RS, RR and AC; the results are summarised in
Table 2.
After calculating the scores, the weightings of the criteria were determined using the RS, RR and AC techniques on the basis of the full ranking
and using the FCPR method
and the C-values of the squared distance norm, denoted as:
, was calculated. Using 33 pairwise comparison matrices
completed by students in the control group, an average matrix was calculated
, and a set of weights for the criteria was determined:
. The matrix consistency index
amounted to
. This set of weights was compared with the previously determined sets by calculating the values of
, marked as:
. The results are summarised in
Table 3.
Based on the determined sets of weights, the criteria were ranked and the similarity of the rankings was determined by rank correlation coefficients:
(20) and
(21). The results are summarised in
Table 4.
The resulting criterion rankings are compatible, or there is a change in position between
and
. For compatible rankings
and
, for a change in position 4 and 3 in the rankings, the coefficient values are
and
respectively. Referring to the suggested linguistic terms (using trapezoidal fuzzy numbers) proposed by Sałabun and Urbaniak [
80] for
, the ranking similarity is high. The observed results can be summarised as follows:
The differences in weights obtained using the RS, RR and AC techniques after changing from the full ranking of criteria to the FCPR method, in which respondents indicated the first three criteria only, were smaller than the differences in weights when the PCM method based on the averaged matrix of pairwise comparisons was used;
The smallest differences in the values of weights were obtained for the RR technique;
The similarity of the resulting rankings assessed by the coefficient WS is high.
The studies conducted in the control group allowed the criteria weight approximation technique to be selected, which was then used in the developed FCPR method to determine the group weights of criteria based on the results obtained from geo-questionnaires carried out over the periods DATE(1) and DATE(2)—which involved the same number of criteria and values of . As it demonstrated the smallest differences in the values of the weights, the RR approximation technique was adopted. The analysis carried out also allowed us to conclude that the criteria weights obtained by the FCPR method are reliable, while at the same time the process of ranking the criteria had been as simplified as far as possible.
4.2. Results Obtained in the Research Using the Geo-Questionnaire
In a simple geo-questionnaire conducted over two periods: DATE(1) and DATE(2), from the two lists of criteria (List No 1 and List No 2) students indicated their three most important criteria for selecting preferred locations. The FCPR (RR) method was then applied and the criteria weights were determined. The results for List No 1 are summarised in
Table 5 and the results for List No 2 in
Table 6. For greater readability, the values of the weights are shown as percentages.
For the criteria in List No 1, the weights of the criteria are similar, the largest difference being the 1.2% decrease in the importance of the criterion of good access to the WUT (K1: University), but even after the outbreak of the pandemic, it was still rated by students as by far the most important criterion for choosing a place to live. The highest increase of 1.0% was achieved by the <Cinemas, theatres, culture facilities, nearby> (K5: Culture) criterion. In second place in the ranking is the <Quiet, green and peaceful neighbourhood> (K2: Quiet) criterion. Both in the survey before and after outbreak of the COVID-19 pandemic, the resulting values of weights for this criterion are almost identical (20.4%; 20.5%). Comparing the values of the criteria weights from List No 1 between DATE(1) and DATE(2) gave: C = 1.6186. The differences in the values of the weights are greater than when changing the method of determining them in the control group. The criteria rankings changed between positions 3 and 4, exactly the same as when the method of determining the weights was changed in the control group. The index indicates the high similarity of the rankings obtained.
For the List No 2 criteria, there was less similarity in terms of weights between the results obtained from the DATE(1) and DATE(2) geo-questionnaires. The largest decrease in criterion importance was recorded for K2: <Neighbourhood/architecture> (−2.9) and the largest increase in criterion importance was for K3: <Close to my family, friends, my job> (+2.5). At the same time, there was a change in the first place in the ranking. It was the criterion of choosing a location close to family, friends and work that topped the ranking in the DATE(2) geo-questionnaire during the pandemic. The change in the weights of the List No 2 criteria is also illustrated by the higher value of C = 4.3290. The lower value of the rank similarity coefficient WS = 0.8266 indicates less similarity of the criteria rankings, although the similarity can still be considered high.
As regards answers to the question “Do you want to live in Warsaw after graduation?” in the geo-questionnaire conducted on DATE(1), the answer “yes” was given by 52.1%, “don’t know” by 28.1% and “no” by 19.8% of respondents. By contrast, in the geo-questionnaire on DATE(2), these three answers were given by 48.8%, 30.6% and 20.7% respectively. There is a slight decrease in the number of affirmative answers in favour of “don’t know”, while the percentage of those who declared no desire to live in Warsaw after graduation remained at a similar level. In the geo-questionnaire, students declared how long they had already lived in the city (more than 5 years, 2–5 years, less than 2 years and “I don’t live in Warsaw”). Responses to the question on the desire to live in Warsaw after graduation were analysed by group of students, determined according to the duration of residence in the city (
Figure 6). An interesting observation is the increase in uncertainty and a decrease in declared desire to live in Warsaw after graduation in the group of people living in the city for more than 5 years, i.e., those with the greatest family, social and often professional ties to the city.
We also compared the obtained criteria weights in the DATE(1) and DATE(2) geo-questionnaires, broken down by groups of students on the basis of their answers to the question concerning the time of their residence in Warsaw (
Figure 7).
List No 1—for all groups of students, two criteria are most important: good access to the university (K1) and a quiet and peaceful neighbourhood (K2). Comparing the results from both periods, it can be observed that, in the groups of students who have lived in Warsaw for a shorter period of time, the criterion of commuting to WUT slightly decreases in importance, while, in the group of students who have lived there more than five years, the importance of this criterion has slightly increased. In all the groups, the criterion of a quiet and peaceful neighbourhood remained at a similar level or slightly increased in significance.
List No 2—for groups of students excluding those who did not live in Warsaw during their studies, a clear change is visible: the criterion “neighbourhood/architecture” loses its importance in favour of “close to my family, friends, my job” as the leading one. This change is particularly noticeable for the group of students who have lived in Warsaw for more than 5 years. These are generally people with strong family ties and often already professional ties to the city. They have close family living in the city, as well as friends not only from their studies, but also from earlier stages of education. The reassessment of the “good investment” criterion also seems interesting. With the exception of the group of students who have lived in Warsaw for less than two years, the importance rating of this criterion increased compared to others, and this is particularly evident in the group of students not living in Warsaw. For them, choosing a flat located in the capital, should they buy it during their studies, would most importantly be a good investment of their capital for the future.
We determined the values of
,
and
between DATE(1) and DATE(2) sets of criteria weights and rankings based on the results in groups of students, broken down by the time they have lived in the city (
Table 7).
The results collected in
Table 7 show that the group weights of the criteria from list No 2 show less similarity. The lowest similarity exists between the results of the groups of students who indicated over periods DATE(1) and DATE(2) that they have lived in the city for less than two years.
Indicated Preferred Housing Locations
Students indicated their preferred locations; these are shown in
Figure 8.
After conducting the DATE(1) and DATE(2) geo-questionnaires, the travel times by public transport, bicycle and car from the locations indicated by the students to the WUT were read out from Google Maps, assuming average weekday traffic congestion, with the arrival time to the WUT set at 8:30 am. In addition, access times were read out at generated points arranged in a regular 500 m × 500 m grid.
Figure 9 shows the results of interpolating (Kernel Density ArcMap ESRI) the travel times to the WUT.
A large convergence of results is visible after plotting on the map the travel time by public transport from the locations indicated by students who gave K1 <nearby or good access to WUT> as the most important criterion in the survey (
Figure 10). The convenience of getting to the WUT by public transport seems to be the most important.
The percentage of indicated locations (K1) from which it is possible to reach the WUT by public transport in time was determined at: 20, 30, 40, 50 and 60 min.
Figure 11 shows a graph based on the obtained DATE(1) and DATE(2) results. It can be seen that the students indicated fewer locations (K1) <near the WUT> in the DATE(2) period than in the DATE(1) period.. This is also confirmed by the decrease in significance of this criterion compared to other criteria between DATE(1) and DATE(2).
Some locations for which K1: nearby or good access to WUT, was declared as the most important criterion were indicated in areas with poor connections to the city centre, from which access to the WUT by public transport takes more than 45 min. A similar situation also exists in the research conducted during DATE(2). This type of observation can be considered an outlier. Boundary commuting times were set by taking the value corresponding to the following as an upper limit to the commuting time: Q3 + 1.5 IQR, where IQR is the inter-quartile range (The difference between the values that correspond to the third and the first quartile), and Q3 is the value that corresponds to the third quartile.
Table 8 summarises the basic descriptive statistics for the set of commuting times from the indicated locations (K1: nearby or good access to the WUT).
Outlier observations. Despite the selection of criterion K1 as the first ranking criterion, students who indicated outlier locations were apparently not guided by this criterion. Outlier observations on both DATE(1) and DATE(2) were results of the geo-questionnaire in which students declared they had no desire to live in Warsaw after graduation, and/or indicated the criterion of location close to their family, friends or work as the most important criterion from List No 2.
Although the majority of students indicated criterion K1: <nearby or good access to the WUT> as the most important criterion compared to other criteria in List No 1, based on
Figure 10 and
Table 8, it can be seen that, when indicating preferred locations, students have different understandings of this criterion, they have different tolerances for it, or are guided largely by other considerations not revealed by the set of criteria in List No 1. Often, these are individual considerations, difficult to capture using spatial maps for the value of the criteria for the whole group of students—such as proximity of residence to family, friends or place of work.
Carrying out a multi-criteria analysis in which both the stated criteria weightings are determined and the preferred locations (revealed preferences) are indicated allows for more complete information on housing preferences.
5. Discussion
In cities that are important academic centres, the population surge is also linked to university graduates who decide to stay in the city after graduation. Young people are looking for places to live that are, above all, well connected to the city centre and offer the comfort of living in peace and quiet. The level of importance of the criterion of choosing a quiet and peaceful place to live did not change between the study periods. Quiet and peaceful places, especially natural green areas, can relieve stress [
85], and mechanical noise adversely affects the well-being of students during lockdown [
86]. The preference for the residence location was mainly due to evaluating the level of comfort (convenient commuting, peace and quiet), with the relative importance of these criteria reaching 34.5% and 20.4% respectively for DATE(1), and 33.3% and 20.5% for DATE(2). The other four criteria analysed in List No 1 had relative significances of about 10%, so the significances are respectively three and two times lower. These other criteria described the possibility of visiting restaurants, pubs, student clubs, sports and recreation, culture, as well as places providing attractive leisure activities and facilities for children.
For the List No 2 of criteria, comparing the results obtained from the DATE(1) and DATE(2) geo-questionnaires revealed that the largest decrease was in criterion K2: <Neighbourhood/architecture> importance (−2.9), and the largest increase was in criterion K3: <Close to my family, friends, my job> importance (+2.5). At the same time, there was a change in the first place in the ranking. If a change of criterion weight leads to a change in the ranking of the criteria, then, in GIS-MCDA, it is considered a significant weight change (rank reversals, e.g., [
87,
88,
89]). For the criteria set in the list No 2, a change of weights caused a criterion replacement at the first place of the ranking, which is a very significant change. Moreover, the determined rank coefficients showed less similarity of the group weights than in the case of changing the method or technique of determining the weight in the control group. The results obtained for List No 2 criteria indicated that it was important for students to maintain social ties, appreciated in particular during the pandemic period: ensuring close proximity to family or friends, a short distance from the workplace, without having to travel longer distances. The increased importance during the pandemic of a criterion that takes into account the distance to the place of residence of family and friends is confirmed, among other things, by the results of a study conducted in Japan by Uehar et al. [
90], in which it was shown that the relationship with people is the most important factor influencing the assessment of stress levels during the pandemic, surpassing the living environment (big cities, rural areas), the type of housing, and the decrease in income.
The locations identified, both before and during the pandemic, showed a significant relationship between the attractiveness of the place of residence and access to efficient public transport. This confirms the role of transport in sustainable urban development, as emphasised in numerous studies, e.g., [
91]. In the conducted research, students declared criterion K1: good access or close to the WUT as being very important. The university is one of the main central places [
92] playing an important role in students’ lives. Despite these declarations, the chosen locations varied in terms of travel time to the WUT. At the same time, the relationship with the availability of convenient public transport was evident (
Figure 10). Despite the fact that classes only took place online during the pandemic, and students did not have to commute to universities for lectures, the significance rating of this criterion slightly decreased. By contrast, approximately 10% fewer locations in DATE(2) were identified from which it takes less than 30 min to commute to the WUT. There was little evidence of a “centrifugal tendency” to choose locations further from the centre.
The executed research did not take into account the economic aspect, which in reality can have a significant influence on the choice of location of a future house. At a later stage of the research, the results obtained will be compared with data on the real estate market and the age structure of the current buyers of flats. Assessing housing prices in various neighbourhoods against the average earnings of university of technology graduates would allow zones of economic accessibility of the location to be determined.
The evaluation of the FCPR method carried out was based on the empirical results in the control group. Respondents declared a ranking of the first three criteria and the full list of criteria was six items. Further analysis is needed, in particular with different variants of the number of k against n (the number of criteria). This will also be the subject of further research.
The compatibility of the stated preferences with the indicated locations was only indirectly assessed. The locations indicated by students who declared criterion K1: “nearby or good access to the WUT” as the most important were compared against a map of the time it takes to get to the WUT by public transport. The methodology and the analysis carried out in fuller detail will be the subject of further research.
In our research, we wanted to develop and test a simplified method for determining group weights of criteria. However, we also were curious whether the pandemic would have an influence on the results, if we repeated our research during the pandemic. For this purpose, we used the results obtained in 2019 from a very simple geo-questionnaire, and repeated the process with an identical form in 2020. In our research, we did not use use a statistically validated survey.