Next Article in Journal
Improved Fracture Surface Analysis of Anticline Rocky Slopes Using a Modified AGA Approach: Feasibility and Effectiveness Evaluation
Next Article in Special Issue
Digital Transformation and Green Development Research: Microscopic Evidence from China’s Listed Construction Companies
Previous Article in Journal
Hourly Building Energy Consumption Prediction Using a Training Sample Selection Method Based on Key Feature Search
Previous Article in Special Issue
The Role of the Total-Quality-Management (TQM) Drivers in Overcoming the Challenges of Implementing TQM in Industrialized-Building-System (IBS) Projects in Malaysia: Experts’ Perspectives
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Load-Settlement Characteristics of Stone Column Reinforced Soft Marine Clay Deposit: Combined Field and Numerical Studies

1
Elitte College of Engineering, Affiliation: MAKA University of Technology, Kolkata 700113, India
2
Formerly, School of Civil,Mining & Environmental Engineering, University ofWollongong, Wollongong, NSW 2522, Australia
3
Geotechnical Engineering Division, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW 2007, Australia
*
Author to whom correspondence should be addressed.
Sustainability 2023, 15(9), 7457; https://doi.org/10.3390/su15097457
Submission received: 4 March 2023 / Revised: 22 April 2023 / Accepted: 25 April 2023 / Published: 1 May 2023

Abstract

Foundations supporting infrastructure built on soft and compressible marine soil are unlikely to sustain due to possibility of undrained shear failure or excessive settlement of the supporting soil. This necessitates the importance of implementing an adequate ground improvement strategy. Among different techniques, soft soil reinforcing by the installation of stone columns is one of the most successful methods in terms of long-term stability of foundations. To investigate the load-settlement characteristics of such reinforced soil, a group of closely spaced stone columns was constructed at a location along the eastern coast of Australia. The site geology revealed thick layers of soft, compressible marine clay deposit. These stone columns were loaded by constructing earthen embankment and the resulting load-settlement characteristics were measured by an array of sensors. A two-dimensional plane strain analysis was performed using finite element modeling simulations. Comparison of numerical results with the field data demonstrated accuracy of the numerical model. Additional studies were carried out to investigate the efficiency of the model. This paper integrates the new findings from the full-scale field study and advanced numerical simulations while drawing pertinent conclusions.
Keywords: embankment; finite element model; marine clay; settlement; stone column reinforcement embankment; finite element model; marine clay; settlement; stone column reinforcement

Share and Cite

MDPI and ACS Style

Basack, S.; Nimbalkar, S. Load-Settlement Characteristics of Stone Column Reinforced Soft Marine Clay Deposit: Combined Field and Numerical Studies. Sustainability 2023, 15, 7457. https://doi.org/10.3390/su15097457

AMA Style

Basack S, Nimbalkar S. Load-Settlement Characteristics of Stone Column Reinforced Soft Marine Clay Deposit: Combined Field and Numerical Studies. Sustainability. 2023; 15(9):7457. https://doi.org/10.3390/su15097457

Chicago/Turabian Style

Basack, Sudip, and Sanjay Nimbalkar. 2023. "Load-Settlement Characteristics of Stone Column Reinforced Soft Marine Clay Deposit: Combined Field and Numerical Studies" Sustainability 15, no. 9: 7457. https://doi.org/10.3390/su15097457

APA Style

Basack, S., & Nimbalkar, S. (2023). Load-Settlement Characteristics of Stone Column Reinforced Soft Marine Clay Deposit: Combined Field and Numerical Studies. Sustainability, 15(9), 7457. https://doi.org/10.3390/su15097457

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop