Skip to Content
You are currently on the new version of our website. Access the old version .
MicromachinesMicromachines
  • Correction
  • Open Access

8 June 2016

Correction: Mariappan, S.G. et al. Polymer Magnetic Composite Core Based Microcoils and Microtransformers for Very High Frequency Power Applications. Micromachines, 2016, 7, 60

,
and
1
Laboratory for Microactuators, Department of Microsystems Engineering (IMTEK), University of Freiburg, Georges-Koehler-Allee 102, 79110 Freiburg, Germany
2
Voxalytic GmbH, Rosengarten 3, 76228 Karlsruhe, Germany
*
Author to whom correspondence should be addressed.
In the published paper [1], there are two errors in Table 5, both of which correspond to the reported results of a paper authored by Macrelli et al. in 2014 [48]. The correct value of the inductance per DC resistance of this paper is 73256 nH / Ω , and the correct value of the core volume is 4.32 mm 3 . Therefore, Table 5 should read as follows:
Table 5. Survey on the state of the art microtransformers (pure RF microinductors are excluded). All the devices except the ones which marked with (*) were characterized using 50 Ω load.
The authors apologize for any inconvenience caused by these errors. The manuscript will be updated online and the previous version will remain available on the article webpage.

Reference

  1. Mariappan, S.G.; Moazenzadeh, A.; Wallrabe, U. Polymer Magnetic Composite Core Based Microcoils and Microtransformers for Very High Frequency Power Applications. Micromachines 2016, 7, 60. [Google Scholar] [CrossRef]

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.