Correlation between Microstructure and Macromechanical Properties in Additive Manufacturing and Welding
Funding
Conflicts of Interest
References
- Burja, J.; Šetina Batič, B.; Balaško, T. Influence of the Addition of Ni on as-Cast Microstructure of Duplex Fe-Mn-Al-C Lightweight Steel. Crystals 2021, 11, 1551. [Google Scholar] [CrossRef]
- Malcharcziková, J.; Skotnicová, K.; Kawulok, P.; Kawulok, R.; Szurman, I.; Růžička, J. Preparation and Properties of Directionally Solidified Ni-Al Based Alloys Modified by Molybdenum. Crystals 2022, 12, 215. [Google Scholar] [CrossRef]
- Nava-Dino, C.-G.; Flores-De los Ríos, J.-P.; Maldonado-Orozco, M.-C.; Sánchez-Carrillo, M.; Bautista-Margulis, R.-G.; Delgado, A.-D.; Almeraya-Calderón, F. Electrochemical Noise Response of Cr2Nb Powders Applying Mechanical Alloying. Crystals 2022, 12, 482. [Google Scholar] [CrossRef]
- Wang, H.; Fu, W.; Xue, Y.; Huo, S.; Guo, M.; Hu, S.; Song, X. Wettability and Spreading Behavior of Sn–Ti Alloys on Si3N4. Crystals 2022, 12, 921. [Google Scholar] [CrossRef]
- Yu, K.; Lei, M.; Zeng, A.; Zhang, H. Microstructure and Mechanical Properties of Laser Welded Magnesium Alloy/Steel Joint Using Cu-Si Composite Interlayer. Crystals 2022, 12, 1083. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Wang, Q.; Fu, W.; Jin, F.; Lei, M.; Shi, J. Correlation between Microstructure and Macromechanical Properties in Additive Manufacturing and Welding. Crystals 2023, 13, 388. https://doi.org/10.3390/cryst13030388
Wang Q, Fu W, Jin F, Lei M, Shi J. Correlation between Microstructure and Macromechanical Properties in Additive Manufacturing and Welding. Crystals. 2023; 13(3):388. https://doi.org/10.3390/cryst13030388
Chicago/Turabian StyleWang, Qian, Wei Fu, Feng Jin, Min Lei, and Junmiao Shi. 2023. "Correlation between Microstructure and Macromechanical Properties in Additive Manufacturing and Welding" Crystals 13, no. 3: 388. https://doi.org/10.3390/cryst13030388