Next Article in Journal
The Bio-Tribological Effect of Poly-Gamma-Glutamic Acid in the Lysozyme-Ionic Contact Lens System
Next Article in Special Issue
Influence of Heat Sink on the Mold Temperature of Gypsum Mold Used in Injection Molding
Previous Article in Journal
Tribological Behavior of Hydraulic Cylinder Coaxial Sealing Systems Made from PTFE and PTFE Compounds
Previous Article in Special Issue
Effects of Three Different Injection-Molding Methods on the Mechanical Properties and Electrical Conductivity of Carbon Nanotube/Polyethylene/Polyamide 6 Nanocomposite
 
 
Article

Article Versions Notes

Polymers 2020, 12(1), 154; https://doi.org/10.3390/polym12010154
Action Date Notes Link
article xml file uploaded 7 January 2020 12:03 CET Original file -
article pdf uploaded. 7 January 2020 12:03 CET Version of Record https://www.mdpi.com/2073-4360/12/1/154/pdf-vor
article xml file uploaded 21 January 2020 10:21 CET Update -
article xml uploaded. 21 January 2020 10:21 CET Update -
article pdf uploaded. 21 January 2020 10:21 CET Updated version of record https://www.mdpi.com/2073-4360/12/1/154/pdf-vor
article xml file uploaded 21 January 2020 10:22 CET Update https://www.mdpi.com/2073-4360/12/1/154/xml
article pdf uploaded. 21 January 2020 10:22 CET Updated version of record https://www.mdpi.com/2073-4360/12/1/154/pdf
article html file updated 21 January 2020 10:26 CET Original file -
article html file updated 21 January 2020 10:27 CET Update -
article html file updated 6 February 2020 21:05 CET Update -
article html file updated 15 February 2020 00:48 CET Update -
article html file updated 19 July 2022 19:56 CEST Update https://www.mdpi.com/2073-4360/12/1/154/html
Back to TopTop