Next Article in Journal
Improved Energy Storage Performance of All-Organic Composite Dielectric via Constructing Sandwich Structure
Next Article in Special Issue
The Influence of Nanofiller Shape and Nature on the Functional Properties of Waterborne Poly(urethane-urea) Nanocomposite Films
Previous Article in Journal
Investigation on the Flexural–Tensile Rheological Behavior and Its Influence Factors of Fiber-Reinforced Asphalt Mortar
Previous Article in Special Issue
Present Status in Polymeric Mouthguards. A Future Area for Additive Manufacturing?
 
 
Article
Peer-Review Record

Green Nanocomposites from Rosin-Limonene Copolymer and Algerian Clay

Polymers 2020, 12(9), 1971; https://doi.org/10.3390/polym12091971
by Hodhaifa Derdar 1,2, Geoffrey Robert Mitchell 3,*, Vidhura Subash Mahendra 3,4, Mohamed Benachour 2, Sara Haoue 2, Zakaria Cherifi 1,2, Khaldoun Bachari 1, Amine Harrane 2,5 and Rachid Meghabar 2
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Polymers 2020, 12(9), 1971; https://doi.org/10.3390/polym12091971
Submission received: 5 August 2020 / Revised: 23 August 2020 / Accepted: 27 August 2020 / Published: 30 August 2020
(This article belongs to the Special Issue Polymer Connect: Polymer Science and Composite Materials)

Round 1

Reviewer 1 Report

The article is well written and organized.

  • In the revision, the discussion can be improved with more references to international scientific literature.
  • The figures can be redrawn to be clearer and look more professional.
  • The scale bar should be more visible in the SEM images.

Author Response

We thank the reviewer for their comments and carefuk reading of our manuscript. We have updated the ms in line with these comments.

Reviewer 2 Report

This paper described the nanocomposites consisting of copolymers and Algerian organophilic-clay named Maghnite-CTA+ (Mag-CTA+) with azobisisobutyronitrile. As a result, the author reported that these composites showed a significant improvement in the thermal stability compared to the pure rosin-limonene copolymer. I recommend this paper to be published after minor revision since the reported results were meaningful in this field.

(1) In Introduction part, the related recent references should be more added in the revised text.

 

(2) In Figure 5, the resolution of SEM image was poor. The author should add the new image in the revised text.

 

(3) In Figure 3, '-1' in 'cm-1' should be superscripted.

 

(4) The reason why the thermal stability was enhanced should be explained in detail in the revised text.

Author Response

We thank the reviewer for their comments and careful reading of our comments. We have updated the ms in line with their comments

Back to TopTop