Next Article in Journal
Tribological Behavior of 3D-Printed Nanometer SiC and SiO2 Particle-Reinforced Polyamide 12 Composites by Selective Laser Sintering under Seawater Lubrication Condition
Next Article in Special Issue
A Multiscale Simulation of Polymer Melt Injection Molding Filling Flow Using SPH Method with Slip-Link Model
Previous Article in Journal
Fully Coupled Three-Dimensional Simulation of Downward Flame Spread over Combustible Material
Previous Article in Special Issue
Geometry Optimization of the Runner Insert for Improving the Appearance Quality of the Injection Molded Auto Part
 
 
Article

Article Versions Notes

Polymers 2022, 14(19), 4135; https://doi.org/10.3390/polym14194135
Action Date Notes Link
article xml file uploaded 2 October 2022 15:47 CEST Original file -
article xml uploaded. 2 October 2022 15:47 CEST Update https://www.mdpi.com/2073-4360/14/19/4135/xml
article pdf uploaded. 2 October 2022 15:47 CEST Version of Record https://www.mdpi.com/2073-4360/14/19/4135/pdf
article supplementary file uploaded. 2 October 2022 15:47 CEST - https://www.mdpi.com/2073-4360/14/19/4135#supplementary
article html file updated 2 October 2022 15:49 CEST Original file -
article html file updated 28 February 2023 16:27 CET Update -
article html file updated 1 March 2023 14:44 CET Update https://www.mdpi.com/2073-4360/14/19/4135/html
Back to TopTop