Next Article in Journal
Electrospun Poly-L-Lactic Acid Scaffolds Surface-Modified via Reactive Magnetron Sputtering Using Different Mixing Ratios of Nitrogen and Xenon
Next Article in Special Issue
Optimization of Printing Process Variables and the Effect of Post-Heat Treatments on the Mechanical Properties of Extruded Polylactic Acid–Aluminum Composites
Previous Article in Journal
Development of Epoxy and Urethane Thermosetting Resin Using Chlorella sp. as Curing Agent for Materials with Low Environmental Impact
Previous Article in Special Issue
Integrating Exposure Assessment and Process Hazard Analysis: The Nano-Enabled 3D Printing Filament Extrusion Case
 
 
Article

Article Versions Notes

Polymers 2023, 15(13), 2967; https://doi.org/10.3390/polym15132967
Action Date Notes Link
article xml file uploaded 6 July 2023 14:42 CEST Original file -
article xml uploaded. 6 July 2023 14:42 CEST Update https://www.mdpi.com/2073-4360/15/13/2967/xml
article pdf uploaded. 6 July 2023 14:42 CEST Version of Record https://www.mdpi.com/2073-4360/15/13/2967/pdf
article html file updated 6 July 2023 14:44 CEST Original file -
article html file updated 20 July 2023 20:55 CEST Update https://www.mdpi.com/2073-4360/15/13/2967/html
Back to TopTop