Next Article in Journal
Feasibility of 3D-Printed Locking Compression Plates with Polyether Ether Ketone (PEEK) in Tibial Comminuted Diaphyseal Fractures
Next Article in Special Issue
A Modified Constitutive Model for Isotropic Hyperelastic Polymeric Materials and Its Parameter Identification
Previous Article in Journal
Adaptive Neuro-Fuzzy-Based Models for Predicting the Tribological Properties of 3D-Printed PLA Green Composites Used for Biomedical Applications
Previous Article in Special Issue
Wearable Pressure Sensor Using Porous Natural Polymer Hydrogel Elastomers with High Sensitivity over a Wide Sensing Range
 
 
Article

Article Versions Notes

Polymers 2023, 15(14), 3055; https://doi.org/10.3390/polym15143055
Action Date Notes Link
article pdf uploaded. 15 July 2023 16:34 CEST Version of Record https://www.mdpi.com/2073-4360/15/14/3055/pdf-vor
article pdf uploaded. 18 July 2023 07:51 CEST Updated version of record https://www.mdpi.com/2073-4360/15/14/3055/pdf-vor
article xml file uploaded 24 July 2023 11:38 CEST Original file -
article xml uploaded. 24 July 2023 11:38 CEST Update https://www.mdpi.com/2073-4360/15/14/3055/xml
article pdf uploaded. 24 July 2023 11:38 CEST Updated version of record https://www.mdpi.com/2073-4360/15/14/3055/pdf
article html file updated 24 July 2023 11:40 CEST Original file -
article html file updated 5 August 2023 20:10 CEST Update https://www.mdpi.com/2073-4360/15/14/3055/html
Back to TopTop